Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.5 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹29.6 L+₹2.4 L (8.96%)Rejected-Finance | L2 | Rejected-Finance Not Being L1 |
Tender Value
₹30.3 L
EMD Value
₹60,600
Closing Date
20 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major Ajit Choudhary
GE (AF) Kalaikunda PO Kalaikunda Air Field Dist Paschim Medinipore State West Bengal Pin 721303
DAY TO DAY MAINTENANCE OF B/R SERVICES AND OTHER MISC B/R REPAIR IN CAMP 1 AND OTHER DOMESTIC AREA AND EXTERNAL PERIODICAL SERVICES TO CERTAIN MARRIED ACCN AND OTM ACCN IN CAMP I CAMP II AND OTHER DOMESTIC AREA AT AF STATION KALAIKUNDA
2023_MES_593933_1
C/8856/E8
Open Tender
Civil Works
Item Rate
270 days
Kalaikunda
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE AF KALAIKUNDA
₹60,600
Yes
4 Jul 2023
9 May 2023
21 Jun 2023
9 May 2023
20 Jun 2023
26 May 2023
Amount
Resecuring or easing and adjusting without taking down of shutter of any description for the following sizes complete all as specified and directed :
Area not exceeding 1.00 sqm each
Area exceeding 1.00 sqm but not exceeding 2.00 sqm each of complete all as specified and directed :
Area exceeding 1.00 sqm but not exceeding 2.00 sqm each of complete all as specified and directed :
Refixing of shutter of any description in same opening complete for the following sizes all as specified and as directed Note :The item for 'refixing' includes taking down, easing and adjusting and also refixing/welding of builders hardware as required including renewal of unserviceable screws, etc. Renewal of builder's hard ware articles, if specially ordered, shall be paid for at 'supplied only' rates
Area not exceeding 1.00 sqm each
Area exceeding 1.00 sqm but not exceeding 2.00 sqm each of complete all as specified and directed :
Area exceeding 1.00 sqm but not exceeding 2.00 sqm each of complete all as specified and directed
Supply only following Hardwares complete all as specified.(To be incorporated against BOQ Srl No 2.00 only)
150 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt
150 mm long Aluminium anozied barrel tower bolt of extruded section
250mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified
250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified
100mm long Butt hinges, medium weight, cold rolled mild steel
75mm long Butt hinges, medium weight, cold rolled mild steel fixed with screw or necessary welding as per existing
75mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised Type C-21 complete all as specified
40mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified
150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified
150mm long aluminium handles, cast type, anodised complete all as specified bull nosed, splayed, chamfered or rounded on one edge or face secured with nails or brads
100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified
2nd class hard wood Plain fillets. square, rectangular or triangular in section, sectional area n.exc 3.0 sqcm, bull nosed, splayed, chamfered or rounded on one edge or face
6mm thick BWR grade plywood . Type BB
125 mm Parliament hinges, mild steel cold rolled. Width of recess between flanges (when open)
Taking down Aluminium door shutters any size and refixing in the same opening including making petty repairs as required like cleaning and repair/replacement of beadings, glazing clips, rubber gasket, stoppers, adjusting tower bolts, locks, hinges etc and make smooth functioning with entire satisfaction of Engr-in-Charge complete all as specified and as directed .Note spare parts required to be replaced deemed to be included in quoated rates
Taking down Aluminium window shutters any size and refixing in the same opening including making petty repairs as required incl cleaning and repair/replacement of beadings, glazing clips, stoppers, rubber beading, locks, stays, hinges etc and make smooth functioning with entire satisfaction of Engr-in-Charge complete all as specified and as directed.Note spare parts required to be replaced deemed to be included in quoated rates
S & F double action concealed type floor springs (hydraulically regulated) made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel top cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.
S & F exposed type hydraulically regulated door closers, universal closer, bottle type (type A), Designation No. 3, suitable for 61 kg to 80 kg mass of doors & 851 mm to 1000 mm width of door, aluminium alloy non porous body and black plate, aluminium alloy piston or pack piston/ pillion, anodized finish not be less than Grade AC 15 of IS 1868 : 1996 with transparent anodic film as per IS 3564: 1995 complete all as specified and as directed.
S & F mortice lock, vertical type, cast brass, 4 levers, vertical type, 100 mm size, finished smooth fixed in position complete all as specified and directed.
Taking down and refixing of pelmet boxes incl new fixtures and fittings (incl nut bolts & steel patti ) complete all as specified and directed
S & F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.
S & F in repairs 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.
S & F in repairs Mild steel Drawers handles, projections drop (50mm to 65mm) on screwed plate complete all as specified and directed.
S & F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate ccomplete all as specified and directed.
S & F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate ccomplete fixed with running welding all as specified and directed.
Supply and Fix, 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sq M in each pane with and including hacking out old broken glass (any thickness, size, quality or description) from frame complete all as specified and directed.
S & F 4 mm thick figured Sheet glass pin headed type and glazing with oil putty and pins in square n exc 0.5 sq. m in each pane on wooden/steel joinery with and including hacking out old broken glass (any thickness, size, quality or description) from frame upto 8.00 mtr height complete all as specified and directed.
M & L Securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/ beads, spring wire glazing spring clips, painting/oiling one coat on rebates, grooves, reputtying and finally one coat synthetic enemal paint over puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and directed
S&F in repairs 18/19mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face fixed with screws to timber frame-work as in cupboard , shelves etc of any size complete all as directed
S&F in repairs 30mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified
S & F 20mm bore Stainless steel drapery rods, suitable for door/widows curtain with incl necessary fancy type Stainless steel dooms as approved by GE, and fitted to each end, with and inclding new brackets and fixed to wall complete all as specified and directed.
Supplying & fixing to floor, walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 and taking up or down 15 mm bore of steel tubing and connections, including cleaning complete all as specified and as directed.
Supplying & fixing to floor, walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 and taking up or down 15 mm bore of steel tubing and connections, including cleaning complete all as specified and as directed.
Taking up or down steel tubing 15mm bore and connections, including cleaning, rerunning the old screw threads as required for re fixing and fixing old steel tubing with all new tube fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc and necessary connections in old position (Walls, ceiling, floors, etc.) complete all as specified and as directed
Taking up or down steel tubing 20mm bore and connections, including cleaning, rerunning the old screw threads as required for re fixing and fixing old steel tubing with all new tube fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc and necessary connections in old position (Walls, ceiling, floors, etc.) complete all as specified and as directed
S&F in repairs PVC tank cover with locking arrangement for 500 ltrs to 1000ltr capacity of approved make complete all as specified & as directed.
S & F in repairs 15 mm nominal size, nonrising spindle type fancy bib taps as per IS 8931: 1993 made of cast brass including Knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed.
S&F in repairs pillar taps 15mm dia, half turn, with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified & as directed.
S & F in repairs 15mm bore CP fancy type Angular stop cock complete all as specified and as directed.
S & F in repairs chromium plated with long shank and cup fancy type (Concealed) 15 mm nominal size, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S & F in repairs 15 mm nominal size, nonrising spindle type fancy stop valves as per IS 8931: 1993 made of cast brass including Knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed.
S&F in repair 15mm size bib tap standard of PTMT any colour long body high pressure screwed for iron pipe and fixed (minimum weight 15mm – 90 gms) complete all as specified & as directed.
S & F in repair 15 mm bore PTMT Pillar taps of any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed.(Minimum weight 15 mm -110 gms) complete all as specified & as directed.
S & F in repair 15 mm bore Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed with and including wall flange complete all as specified and as directed. (Minimum weight 15 mm-90 gms) complete all as specified & as directed.
Supply and fixing in repairs of Grating doom 100mm dia of PTMT(Minimum weight 25gms) complete including jointing with solvent cement, all as specified & as directed.
S & F in repair of swivel shower of PTMT any coloured for fixing with 15 mm pipe complete all as specified and as directed. (Minimum weight 40 gms) complete all as specified & as directed.
S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified & as directed.
S&F in repairs PVC washer for 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level.
S&F in repairs PVC handle for 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level.
S&F in repairs PVC float for 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level.
S&F in repairs PVC syphon for 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level.
S&F in repairs Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm -45gms)
S&F in repairs Waste coupling of PTMT (half or full threaded) . (Minimum weight 40mm -60 gms)
S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised or PVC hinging device
S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long
S&F in repairs Gun-metal, globe or gate valves for 20mm bore dia of pipe, with iron wheel head, screwed both ends for iron pipe and fixed
S&F in repairs 40mm wide and 5mm thick PVC door seal (snake guard) with powder coated aluminium frame
Repairs to stop cock, bib tap, Pillar tap.gate valve and float valve etc with washers, jute complete all as specified and as directed Note: cost of Spare part are required to be replaced deemed to be included in quoated rates
S & F in repair of peg stay 300 mm long with 3/4 holes stove enameled black suitable for existing steel windows including nut/bolts complete all as specified and as directed.
S & F in repair of steel window handles, left/right stove enameled black with nut bolt & washers complete all as specified and as directed.
S & F in repairs concealed nipple 15/20mm dia complete all as specified and as directed.
S & F in repairs of 32 mm bore waste coupling of PTMT(half or full threaded) completed all as specified and as directed. (Minimum weight 45gms)
S & F in repairs of 40 mm bore waste coupling of PTMT(half or full threaded) completed all as specified and as directed. (Minimum weight 60 gms)
S & F in repairs flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm connected to PVC waste fittings complete all as specified and as directed.
S & F in repairs flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm connected to PVC waste fittings complete all as specified and as directed.
S&F in repairs 32mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer- in- charge
S&F in repairs 40 mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer- in- charge
Supply and Fix, brass CP fancy centre hole basin mixer for mixing hot & cold water screwed down for iron pipe 15 mm bore and fixed, with including hand shower and tube inlcuding taking out unserviceable existing one complete all as specified and directed. (Make mixer cat part no. QQT-7169B of Jaquar or equivalent make Kohler/Marc)
S&F in repair 15 mm dia sink mixture wall mounted complete all as specified and directed.
S&F in repair 15 mm dia Brass CP wall mixer 3 in 1 for mixing hot & cold water screwed down for iron pipe and fixed with and including hand shower complete with 115mm long band pip[e, connecting legs and wall flange complete
S & F in repairs PVC-U, type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 75 mm dia, laid in trenches/floors complete all as specified and directed by Engineer- in- charge .
S & F in repairs PVC-U, type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 110 mm dia, laid in trenches complete all as specified and directed by Engineer- in- charge .
S & F UPVC bends without inspection door (any angle), 75 mm dia conforming to IS 14735: 1999 complete all as specified and directed by Engineer- in- charge
S & F UPVC bends with inspection door (any angle), 75 mm dia conforming to IS 14735: 1999 complete all as specified and directed by Engineer- in- charge
S & F 75 mm bore PVC (SWR) branch piece single (Single `Y'/'T') equal or unequal without access door complete all as specified and directed by Engineer- in- charge
S & F 75 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified and directed by Engineer- in- charge
S & F 110 mm bore PVC (SWR) branch piece single (Single `Y'/'T') equal or unequal without access door complete all as specified and directed by Engineer- in- charge
S & F 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified and directed by Engineer- in- charge
S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified and directed by Engineer- in- charge
S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and directed by Engineer- in- charge
S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed
S&F in repairs health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed
S & F in repairs brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges .
S & F in repairs wash basins, vitreous china, white, flat back, size 550 mm X 400 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed.
S & F in repairs vitreous china wash down water closet (pedestal pattern), white including thermoplastic seats and covers of grade 2 type, flat with hinging device of bronze or brass with nickel chromium plating, fixing bolt, connector to flush pipe and making connections to flush pipe, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs vitreous china squatting pan, 'Orissa" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S” trap, front or back inlet and integral foot rests, any pattern and including fixing bolt, connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge.
Dismantling structural steel work including doors, gates,guard bars but excluding framed trusses complete all as specified and as directed by Engineer-in-Charge.
S&F Rolled mild steel Framed work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats and vertical post etc complete GDE Fe410-0 Quality B complete all as specified and directed by Engineer-in-charge.
S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 Quality B complete all as specified and directed by Engineer-in-charge.
M&L for 1.00mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
M&L for running welding in repairs n.exc 2.5cm in length on metals to be welded complete all as specified and directed by Engineer-in-charge
M&L for welding in repairs exc 20mm but n.exc 25mm in length and thickness of metal n.exc 6 mm complete all as specified and directed by Engineer-in-charge
Dismantling AC (corrugated or semi corrugated) sheets in roof covering complete all as specified and as directed by Engineer-in-Charge.
S&F 6 mm thick asbestos cement corrugated or semicorrugated sheets in roofs walls etc. fixed with L or J type hook or cranked bolts complete all as specified and as directed by Engineer-in-Charge..
All as per item item no 81 above but fixing only/exept sheets only complete all as specified and as directed by Engineer-in-Charge...
Dismantling of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Material and Labour for pre-painted, galvalume aluminium zinc coating GI based Trapezoidal type profile sheet (AZ-150), 0.50 mm thick (total coated thickness), of any colour, having minimum tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws, complete all as specified and directed.
All as per item 84 above but fixing only with providing new self tapping screw with bitminous washer covered with silicon based compound to stoping any leakage complete all as specified and directed.
S&F Plain, galvanised, mild steel sheeting, 0.8 mm in ridges, hips, valley gutters, drip and straight flashings roof covering fixed with self tapping screw complete (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises
M & L for glazed, colour ceramic wall tiles (group B III), of size 300 x 200 x 7 mm thick on vertical surfaces including 10 mm thick backing coat in cement mortar (1:3), set and jointed in neat cement slurry and pointed in epoxy mortar to match all as specified and directed.
M & L for glazed, colour ceramic wall tiles (group B III), of size 450 x 350 x 7 mm thick on vertical surfaces including 10 mm thick backing coat in cement mortar (1:3), set and jointed in neat cement slurry and pointed in epoxy mortar to match all as specified and directed.
M & L for non skid, rectified, colour ceramic floor tiles (group B II), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, length more than 460 mm but less than 700 mm, minimum 8 mm thick in floors including 15 mm thick screed bed or bedding in cement mortar(1:4) set and jointed in neat cement slurry and pointed in epoxy mortar to match complete all as specified and as directed.
Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc.complete.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed by Engineer in charge.
M & L for brick work with sub class 'B' bricks(Fly ash), straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.
All as per item no 93 above but except bricks complete all as specified and as directed.
M&L Brick work with sub class B bricks (Fly Ash) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and as directed.
Materials and Labour for rendering 5mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, at any height and safety measures complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)
Supply only liquid water proofing compound.
M & L for rendering 5mm thick cement plaster in cm 1:3 on ceiling including finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.
M & L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.
M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparation of new plastered surfaces applying 1.5 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of oil bound distemper over a coat of primer on walls complete all as specified and as directed.
M & L for applying Two 100 % Acrylic Exterior Emulsion paint (Berger,Weather coat Advanced XP Brand/Asain Paints :Apex ultima Brand /ICI:Dulux Weather shield Max Brand/J&N:Safeguard Optima Brand over a coat of exterior wall primer on new concrete/wall ,chajja, facia & ceiling surface) including preparation of surfaces,at any height including 1.5 mm thick wall perimem quality putty and all necessary scaffolding and safety measures complete all as specified and directed
S&F in repair Sink coupling of PTMT complete all as per specificied and directed
M&L for complete removal of existing treatment from walls, and applying two coats of acrylic emulsion distemper over a coat of primer on walls,over and including a coat of 1.5 mm thick white wall care putty premium quality on walls complete all as specified and as directed.
M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.
M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.
Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground level)
M & L for providing cement concrete type C1, 1:3:6 (20mm stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork, as directed complete all as specified and directed by Engineer- in-charge.
M&L for 40mm thick cement concrete type B1 1:2:4 (20mm stone aggregate) as in floors and pavings finished even and smooth with out using extrs cement etc complete all as specified.
S & F in repairs 10 litres capacity, low level, syphonic type, white, plastic flushing cistern as per IS 7231: 1994 with inlet, ball valve, float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe complete all as specified and as directed.
S & F rotational moulded polyethylene multi- layer water tanks in green colour (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes including dismantling the existing one and removing to store complete all as specified and as directed.
S & F rotational moulded polyethylene multi- layer water tanks in green colour (vertical cylindrical with close top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes including dismantling the existing one and removing to store complete all as specified and as directed.
S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for 15mm bore dia iron pipe and fixed. (Minimum weight 15mm-142gms)
S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for 20mm bore dia iron pipe and fixed. (Minimum weight 2 0mm-210gms).
M&L cleaning of service PVC tank by rubbing vertical wall and bottom of with bleaching powder and allowed ½ hour to react and then washing down with water to get free from deposits and bleaching inside the tank of capacity exceeding 250 ltrs & upto 500 ltrs capacity complete including lettering/numbering Date of Cleaning all as specified & as directed.
M&L cleaning of service PVC tank by rubbing vertical wall and bottom of with bleaching powder and allowed ½ hour to react and then washing down with water to get free from deposits and bleaching inside the tank of capacity exceeding 500 ltrs & upto 1000 ltrs capacity complete including lettering/numbering Date of Cleaning all as specified & as directed.
Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. including , laying and testing of elastomeric bituminous coating system based on bituminous emulsion, polymer and additive conforming to ASTM C 836 (“Dr. Fixit Solyseal" or equivalent of M/s Fosroc, M/s STP Limited) over the substrate including application of one coat of primer (solyseal 1 : water 1) followed by two coats of solyseal applied @ 0.90 kg/sqm/coat sandwiched with open woven glass fibre of mesh 2 mm X 2 mm or PE based spun bound fabric of 40 gsm complete as per manufacturer specification in sunken portion with and including sunken floor shall be filled with PCC 1:3:6 as per existing thickness complete all as specified.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like over and including 20mm thick screed bed or bedding layer in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed.
Dismantling/taking down unserviceable part of steel rolling shutters(self coiling type shutters ie push pull with gear oprating type machnically or moter operated) area n.exc 10 sqm and for repairing and overhauling of rolling shutters and greading/oiling of members of rolling shutters M&L for preparation of old painting iron and steel surfaces by scraping & rubbing down with sand paper,removing dense and scratches if any and filling the same with paste filler and appling one coat of synthetic enamel paint complete all as specified Note-(i) refixing/welding of rolling shutters duly repaired/overhauled/welded/painted shall be included in the quoted rates of thisitem (ii) fixing &replaching of new parts of rolling shutters shall be included in the quoted rate of this item (iii) Makes/size/specification of rolling shutters (iv) any damage or loss of rolling shutters during taking down/dismantling shall be made good by the contrector at this own cost.
S&F in repair of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T-2430/1510 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200mm/600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. The Main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 6 mm dia G.I. wire from purlins/soffit. 6mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Designer Ceiling Board (Density>1300 Kg/m3) of size 595mm x 595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7&8, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of engineer-in-charge.
M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etc by brooming down or steel wire brushing and sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with putty as per existing thickness and applying one coat of white washing on the wall all as specified and directed
M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other ceiling features etc by brooming down or steel wire brushing and sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with putty as per existing thickness and applying one coat of white washing on the ceiling all as specified and directed
M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etc by brooming down or steel wire brushing/sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with putty as per existing thickness and applying one coat cement base paint on old surfaces complete all as specified.
M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etc by brooming down or steel wire brushing/sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with putty as per existing thickness and applying two coat cement base paint on old surfaces complete all as specified.
M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etc by brooming down or steel wire brushing and sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with putty as per existing thickness and applying two coat of white washing on the wall all as specified and directed
M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etc by brooming down or steel wire brushing and sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with external wall care putty as per existing thickness and applying one coat of100 % Acrylic Exterior Emulsion paint on old surfaces complete all as specified and as directed.
M&L for writing letters or figures Block, Roman, Italic or Indian) n.exc. 30 cm high with thick paint, so that they stand out boldly and solidly without showing signs of brush marks (if necessary, they shall be repainted until the desired result is obtained) complete all as specified and as directed.
M&L for writing stops, commas, short lines, dashes, hyphens, brackets etc with with thick paint, so that they stand out boldly and solidly without showing signs of brush marks (if necessary, they shall be repainted until the desired result is obtained) complete all as specified and as directed.
Removing of plants including roots by dismantling of brick work/PCC/RCC including necessary scaffolding, any type, any location/height (i.e roof, parapet walls near pipe etc) and applying acid after removing roots for preventing regrowth and making good the disturbed portion using PCC 1:2:4 Type B-0 and plaster in CM 1:3 (size of disturbed portion 150 x 150 x 150mm) complete all as specified and as directed by Engineer-in-Charge
Rate quoated above items item no.01 to 121 here in before inclusive provision as under :Making arrangement for establishment of centralized complaint centre in the existing building as under :- (a) Infrastructure required in Complaint cell i.e. telephone, furniture, stationary, transport and other necessary items/materials to establish a new complaint centre able to receive and manage complaints from the users by all means ie Manual complaint mechanism, Telephonic complaints mechanism, SMS complaint Mechanism and e-mail complaint mechanism and to maintain a consolidated list of complaints and its redressal mode indicating all its relevant data. (b) Computer data operator shall be able to manage all the necessary activities and having qualification as Graduate in any discipline with minimum one year certificate course of computer applications (from a Govt recognized institute), (c ) Provision and maintenance of all tools, plants, equipment and safely gear required for tradesmen under this contract (d) Provision of communication facilities to supervisor and tradesmen. (e) Monitoring and management of complaints report from generation to execution of complaint including pending complaints. (f) Updating status of lodged complaints before change of eight hour shift. (g) Provision of motorized conveyance for deployment to all tradesmen under this contract. (h) Basic inputs to be noted from the complainants will be locality, Building No, Qtr No, Name and Rank of complaint and exact nature of complaint and mobile No/ telephone (j) On lodging the complaint, the Complaint No will be assigned for reference . Also system should indicate an approximate time for repairs. Accordingly a corresponding complaint slip shall be generated by the system with all relevant info. Complaint slip should be printed in triplicate and to be handed over immediately to Supervisor who shall detail appropriate tradesmen for repair with required materials/store. One copy of complaint shall be retained in complaint centre and two copies with tradesmen. (k) On both copies of complaint slip, status of the complaint attended shall be endorsed by the complaint/user. One copy to be retained by the complainant and second copy to be with tradesmen for handing over in the complaint centre. Reasons for non attending of complaint etc shall be recorded alongwith estimate of expected time to attend and rectifying the complaint. (l) At the end of each day, summary of complaints shall be prepared and generated indicating No of complaints lodged, attended in time, Reasons for not attending , probable time required for attending the pending complaints etc (m) JE in charge of MES will review the complaints recorded in the system daily and will carry out personal inspection of complaints attended and its status and will take remedial measures in this regard. (n) AGE will visit the complaint cell at least thrice a week and GE at least once a weak to check the efficacy of the system and record their remarks accordingly. Note : Contractor shall be responsible for followings :- (i) Installation of landline telephone connection with internet broadband facility, obtaining SIM cards for mobile phones for supervisor and workers, deployed by the contractor. (ii) Implementation of Bio-metric system for attendance of supervisors and workers, deployed by the contractor.. (iiii) Payment of telephone bills, internet charges, mobile bills, expenses etc shall be borne by the contractor and no claim whatsoever on this account will be admissible by the department.
SNEHANGI TRADERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .