Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹34.1 LAccepted-AOC | 1 | Accepted-AOC Lowest bidder | |
| 2 | 2₹39.0 L+₹4.3 L (12.3%)Rejected-AOC | 2 | Rejected-AOC 2 | |
| 3 | Rejected-Technical | - | Rejected-Technical Not Admitted Due to Same DD is uploaded in other tender |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
27 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TUGHLAKABAD
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
PERIODICAL SERVICES BY USING SMART PERIODICAL METHODOLOGY TO CERTAIN BLDGS AND REPAIR TO JOINERY AND OTHER MISC B/R WORKS AT 12BRD, AF STN NAJAFGARH UNDER GE (AF) TUGHLAKABAD
2023_MES_592409_1
GE/TKD-21/2023-24
Open Tender
Civil Works - Others
Item Rate
270 days
GE AF TUGHLAKABAD
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
9 documents required · 9 mandatory
₹500
GE AF TUGHLAKABAD
₹90,000
Yes
10 Oct 2023
29 Apr 2023
29 May 2023
6 May 2023
27 May 2023
13 May 2023
Amount
Complete removing of existing treatement by scrappping with asian paints TruCare Wall sander:- L-01/H-01(Having mechanical vaccum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit havingg dia of 7"/"9" to mame the surface free from dust, loose paint etc, by skilled labour complete all as specified and directed by Engr-in-charge.
M&L for acrylic polymer- modified cementitions high performance coating (two component) with high solid content and can be used for the both side waterproofing due to its excellent bonding, good waterproofing and unmatched resistance to hydrostatic pressure which resist up to 5 bars of positive hydrostatic pressure and form highly elastic form which provides elongation up to 100 as per manufacturer instructions complete all as specified and directed by Engr-in-charge.
M&L for single component polymer modified mortar smart care repair mortar with compressive strength of 38 MPA at 28 days (ASTM C 109:99) and tensile strength of 2.5Mpa (ASTM C 109:99) and rensile strength of 2.5 MPA (ASTM C 307) up to 25mm in a single coat and max thckness of 50mm @ 53kg for 25mm thickness per sqm as per manufacturer instructions complete all as specified and directed by Engr-in-charge.
M&L waterproof cement based putty @ 1Kg (undiluted) per sq mtr. Of average thickness 1mm of asian paints or its equivalent over the plasterd/ old painted wall after scrapping Asian Paints Trucare wall sander: L-01/H-01 or equivalent (having mechanical vaccum mechanism) having RPM not less than 1500 sannding pad of 240 Grit or above having dia of 7"/9" to make the surface free form dust etc. by skilled labour. Step 1) Mix the putty powder by adding 40-50% water and mix it with asinan Piants Trucare putty mixer (Trucare Putty mixer with min 1400W power having mixer rod of industrual stell grade 45 with the mixing capacity of min 2.5Kg putty per minute).Step 2) Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine (Model: EH 230DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041" Step-3 Allow 6-8 hrs time ot dry the putty surface complete all as specified and directed by Engr-in-charge.
M&L for one coat of acrylic waterbased interior grade primetr @ 0.8 ltr (undiluted)/10 Sq mrs diluted with water in 1:1 ratio to be applied with fully automatic airless apray machine of paint application of Asian Paints Trucare Graco or equivalant having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subseqent quotes complete all as specified and directed by Engr-in-charge.
M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun wotjh a max materal hose length of 30 mtr the spray machine should be of reputed manufacturer woth pro guard technology and capability of traching pressure and paint usage and certified by paint maufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach area and prnetration of ditemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. NOTE:-Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean envinment certifird by paint manufacturer.
M&L for two coats of smooth acrylic emulsion with rich matt finish having voc less than 50 grams per ltr complying leed criteria @ ltrs ( undiluted)/ 10 Sq mtrs diluted with water in 2:1 ration applied over priming caot with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min 1HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint as per maufacturer instruction complete all as directed.
M&L for Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 33000 PPSI and capable of operation single spary gun with a max materal hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of traching pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper ashould be able to spray in hard to reach areas and penetration of dustemper on the surface to achieve excellent application using limited manpower complete all as specified and directed by Engr-in-charge. Note:- Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean envionment certified by paint manufacturer.
M&L preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots etc and applying one coat of cement base paint on decorated plastered surfaces of walls complete all as specified and directed by Engr-in-charge. ( Note :- All holes/cracks to be filled with birla putty and making good to old surface)
M&L for preparation of old surfaces of brick/concrete wall surface by brushing, washing and applying one coat of Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-charge.
M&L applying one coat of distemper oil emulsion on old decorated surfae of walls incl preparation of surfaces by washing rubbing down and stopping of distempered surfaces complete all as specified and directed by Engr-in-charge. ( Note :- All holes/cracks to be filled with birla putty and making good to old surface)
M&L applying Two coat of distemper oil emulsion with complete removal of existing treatment on surfaces complete all as specified and directed by Engr-in-charge.
M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.
M&L for preparation of old Aluminium paint steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of aluminium paint all as specified and directed.
M&L for preparation of old painted concrete surface over 10cm girth or width not otherwise described & applying one coat of synthetic enamel paint all as specified & directed by Engineer-in-Charge.
M&L rendering 15mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement incl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.
M&L rendering 15mm thick in cm 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement incl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.
M&L two coats of cement based paint on new surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-charge.
M&L writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high on buildings complete all as specified and directed by Engr-in-charge.
Taking down Chowkats or frames with shutters (without taking off shutter from the frame) not exceeding 1.5 Sqm complete all as specified and as directed by Engr-in-charge.
Taking down Chowkats or frames with shutters (without taking off shutter from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each for chives soffits, linings, window boars etc complete all as specified and as directed by Engr-in-charge.
Taking down Shutter of any description exc 1 sqm and nexc 2 sqm each complete all as specified and as directed by Engr-in-charge.
M&L in repair anodised aluminium frame (minimum 50 micron powder coating) for doors, windows, ventilators with one or more rebates including cleat for fixing etc. complete all as specified and directed by Engr-in-charge.
S&F in repair anodised aluminium powder coated (any colour-thickness of powder coating not less than 50 micron) door shutters aluminium sections weighting 0.55 Kg per Sqm including necessary joining cleats, glazing clips, rubber neoprene packing, handle (2 nos) in each door, hinges, aluminium anodised snap beading, screws etc complete all as specified and directed by Engr-in-charge.
S&F in repair anodised aluminium powder coated (any colour-thickness of powder coating not less than 50 micron) window and ventilator shutters side hung type without sash bars, aluminium sections weighting 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no), hinges type B-21 100mm long (2 no), suitable handle (1 no) one no aluminium tower bolt 100mm for each leaf and Aldeco grill, 5.5mm thick colour glass and ss wire mesh 0.36mm nominal dia and width of aperture 1.18mm for each leaf complete all as specified and directed by Engr-in-charge.
S&F in repair aluminium grill (DG-104) of size 10mmx5.2mm thick on 'F' extruded aluminium section of suitable size and fixed with aluminium windows or ventilators complete all as specified and as directed by Engr-in-charge.
S&F in repairs of 5mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engr-in-charge.
S&F in repair of Stainless steel wire cloth, (grade 304) 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and as directed by Engr-in-charge.
S&F factory made solid PVC door frame in repair of size 50mmx47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube supplying and fixingin opening as per specification given under SSR Part-II 2010 and making good the disturbed surfaces complete all as specified and as directed by Engr-in-Charge.
S&F factory made solid PVC door shutter of 30mm thick style consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side, as gap insert for top rail & bottom rail, paneliing of both side prelem PVC sheet to be fitted in the MS frame welded or sealed to the sites and rails with suitable PVC sheet beading and jointed together with solvent cement supply and fixing in the frame at site all as specified and shown in SSR Part-II at Page Nos 146 to 148 complete all as specified and as directed by Engr-in-Charge.
S&F in repair of stainless steel butt hinges with stainless steel pins medium weight 100mm long fixed including welding to Angle Iron door frame or fixed to wooden chowkhats complete all as specified and directed by Engr-in-Charge.
S&F in repair of 150 mm long aluminium anodised barrel tower bolts of extuded section fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair of Extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed by Engr-in-Charge.
S&F in repairs of aluminium alloy, anodised, sliding door bolt of 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section, fixing bolts, sliding bolts of extruded section or cast aluminium alloy and fixed length 300 mm complete all as specified and directed by Engr-in-Charge.
S&F in repair of Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge.
S&F in repairs of Steel windows or ventilators, fixed type with glazing bars all as specified and directed
S&F in repairs of 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engr in charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge.
Demolition of brick or stone/boulder masonry built in cement mortar complete all as specified and directed by Engr-in-Charge
M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mm mean radius built in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.
M&L for rendering 15mm thick in cement mortar 1:4 on brick or concrete surfaces finished even and smooth finish without using extra cement with water proofing compound @ 3% by weight of cement making surfaces even & smooth without using extra cement complete all as specified and as directed by Engr-in-charge. Note: The WPC shall be measured and paid separately.
M&L for rendering 15 mm thick cement and mortar 1:6 with mixing of WPC on brick or concrete surfaces even & smooth without using extra cement complete all as specified and as directed by Engr-in-charge.
Supply only internal water proofing compound complete all as specified and as directed by Engr-in-charge.
S&F pressed steel frame for doors size 105x60 mm with one or more rebates including necessary fixing lugs,hinges,lock strike plate, etc complete as specifieid and directed.
S&F pressed steel frame for doors size 125x60 mm with one or more rebates including necessary fixing lugs,hinges,lock strike plate, etc complete as specifieid and directed.
S&F 35mm thick IInd class hard wood glazed or skeleton shutters, open rebated and prepared to receive glass, gauge etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered bead for securing glass etc,. Sizes of member of shutters as specified in SSR Part-I,1991, section 8, clause 8.20(a) complete all as specified and as directed by Engr-in-charge.
S&F 35mm thick IInd class HW plain framed panelled shutter (any numbers of panel) with lock rail & panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneered on both faces, the size of rail as per IS: 1003 (Part-I), kiln seasoned & chemically pressure treated complete all as specified and as directed by Engr-in-charge.
M&L for flush shutter 40 mm thick solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed by Engr-in-charge.
M&L for flush shutter 25 mm thick solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed by Engr-in-charge.
S&F 300mm mild steel ordinary rat rail, rod pattern springs including roller and roller plate (Helical door spring) complete all as specified and as directed by Engr-in-charge.
M&L for 300mm long mild steel sliding door bolt, plate type stove enameled black with bright bolt not less than 12mm dia including minimum 6 bolts and nuts etc complete all as specified and as directed by Engr-in-charge.
S & F mild steeel pressed hanle 125 mm long oval type stove enamelled black all as specified and directed
S & F 150mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed all as specified and directed
S & F Aluminium door closer hydraulically regulated designation No 3 universal type suitable for dooor shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed all as specified
S & F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover govering pivot made of brass other parts made of mild steel heavy duty and fixed all as specified and directed
M&L for preparation of new painted surfaces of wood or wood based primer material of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil distemper wash over a coat of white wash complete all as specified and as directed by Engr-in-charge.
M&L for two coats of cement based paint over a coat of white wash on new surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-charge.
S&F Continuous (piano) hinges MS bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified and as directed by Engr-in-charge.
M&L for prelaminated particle board of 18/19mm thick exterior grade both sides with decorative face with veneer on both sides using cub boards finished with fixed with screws to timber frame complete all as specified and as directed by Engr-in-charge.
M&L Framed work such as grills,gratings, etc.. with ends of barsshouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework ofwater tanks and similar workconforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-charge.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangemen all as specified and directed by Engr-in-charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed by Engr-in-charge.
GIR RAJ BUILDERS
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .