SPECIAL REPAIRS TO BLDG NO T-26 AND T-55 OF MED REGT AND ADDN/ALTN TO BLDG NO P-21 AT MALL ROAD IN THE AREA OF AGE BR III UNDER GE (EAST) DELHI CANTT-10

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc., to receive new plaster, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5Sqm each, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5Sqm but not exc 4Sqm each, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) & removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling wall & ceiling boards (fibre, insulation etc ) or insulation boards, slabs, blankets any thickness including frame work of any type and cover fillets, complete all as specified and as directed.

Dismantling steel (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and as directed.

Dismantling timber scantlings (Purlins/Rafters) 40Sqcm and over in section, framed work fixed with nails, complete all as specified and as directed.

PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in roof kerb, mud stops, platform for OHT, etc., and similar type of works including weathering, slightly rounded or chamfered angles, complete incl demolition of existing PCC all as specified and as directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:6, complete all as specified and as directed.

1st class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

Pressed steel frames size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including filling hollow portion of frames with PCC 1:3:6 Type C-0 using 12.5mm graded crushed stone aggregate etc., complete all as specified and as directed.

Factory made Flush door shutters 35mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

Factory made 35mm thick 1st class hard wood for plain framed panelled shutters (any number of panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS: 1003(Part 1), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

Glazed and Skelton shutters using 2nd class hard wood, 35mm thick open rebated and prepared to receive glass or gauge etc., edges of framing plain and chamfered or fitted with cut or mitered beads for securing glass or gauze, size of member of shutter as specified in SSR Part-I section 8, clause 8.23(a) and divided in square complete all as specified and as directed.

Fabrication & fixing of Modular kitchen cabinet & wardrobe/ cupboard made out of 15-18 mm thick HDHMR action tesa or century with 0.8mm fabric colour laminate after approval and all exposed sides with edge band 0.8mm from rehau German including providing cabinet for keeping baskets/ cutlery basket etc, complete all as specified and as directed. (Design and pattern as approved by GE). Note:- Kitchen accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately).

Modular kitchen cabinet & wardrobe/ cupboard made out of 8-10mm thick HDHMR with laminated fabric colour on both sides complete all as specified and as directed.

Supply only Stainless steel basket (plain) of size 500mm x 370mm x 100mm made of 4mm thick S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers, complete all as specified and as approved by Engr-in-Charge. Make: Life style Cat part No WA/POB/15204 or equivalent approved by Engr-in-Charge.

Supply only Stainless steel thali basket (11-13 division) of size 500mm x 370mm x 200mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS/SS galvanised over rollers, complete all as specified and as approved by Engr-in-Charge. Make: Life style Cat part No WA/TB/15208 or equivalent approved by Engr-in-Charge.

Supply only Stainless steel Plate basket (11-13 division) of size 500mm x 370mm x160mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS/SS galvanised over rollers, complete all as specified and as approved by Engr-in-Charge. Make: Life style Cat part No WA/PTH/15206 or equivalent approved by Engr-in-Charge.

Supply only Stainless steel Partition basket of size 500mm x 370mm x 160mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18''/20'' length two way extruded MS/SS galvanised over rollers, complete all as specified and as approved by Engr-in-Charge. Make: Life style Cat part No WA/PRT/17206 or equivalent approved by Engr-in-Charge.

Supply only Stainless steel Cutlary basket of size 500mm x 370mm x 100mm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18''/20'' length two way extruded MS galvanised over rollers,complete all as specified and as approved by Engr-in-Charge. Make: Life style Cat part No WA/CUT/15204 or equivalent approved by Engr-in-Charge.

Mild steel butt hinges cold rolled medium weight of size 150 mm for shutters, complete all as specified and as directed.

150 mm size fancy type Brass handlesoval type, complete all as specified and as directed.

Aluminium anodized 125mm size handles of extruded section and fixed, complete all as specified and as directed.

150mm fancy type Brass barrel tower bolts of extruded section and fixed, complete all as specified and as directed.

Aluminium anodized 150mm size barrel tower bolt of extruded section and fixed, complete all as specified and as directed.

250 mm size aluminium alloy anodised sliding door bolt with haps, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, fixed in repair complete all as specified and as directed.

300 mm size brass siding door bolts, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed, complete all as specified and as directed.

Galvanised mild steel wire cloth 0.56 mm nominal dia or wire and an average width aparture 1.18 mm and fixed with tinned tack/stainless steel wire stapple, complete all as specified and as directed.

Stainless steel Curtain Rod 20 mm dia with holders fixed to wall etc., fixed in repairs, complete all as specified and as directed.

Stainless steel fancy type bracket with new screws for curtain rod, fixed in repairs, complete all as specified and as directed.

Providing and fixing factory made UPVC (white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm having profileof hollow section with multi chamber. Frame size (60mmx58mm), sash (60minx78mm), T profile having one vertical length in between two shutters of size (60mmx 74mm) glazing head (35mmx 20mm) mitered cut and fusion welded at all corners including making holes for fixing hardware and drainage of water, provision of EPDM gasket 1.2 thick galvanised steel frame (28mmx21.50mm), sash (31mmx27mm). T profile (27x17mm) to inserted in required profile frame will be fixed to wall with 8mm x 100mm long fasteners including necessary hardware viz casement (door handle,tower bolt,stopper,locking arrangemnt,and other acceessories )made of zinc alloyed (white powder coated), corner striker, secondary strikers, cylinder, transmission gear made of mild steel with multi point locking system with strikes, hinges of zinc alloyed (white powder eoated) complete all as specified and as directed. (Note: a) The unit rate quoted by contractor included cost of glass and board. Net opening will be measured for payment purpose. b) Overall net size including frame will be measured for payment purpose) Make : Okotech Aparno, H20 Solution, Fenesta or equavalent

Providing and fixing factory made UPVC white colour siliding window three track made xtruded profiles with all thickness of 2.3mm, having profile with hollow section with multi chamber. Frame size (60mm x 62mm), sash (42mmx67mm), sliding inter lock (one vertical length in each shutters) (45.5mmx28mm),glazing head (24.50mmx 16), mitered cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water etc. including EPDM gaskets 1.2, thick glavanised steel frame (30mmx21.50mm), sash (30mmx 18 mm) profile to be inserted in required profile frase will be fixed to the wall with 8mmx100mm long fasteners including hardware vz touch lock of zinc alloyed ( white powerder coated), steel roller system , aluminium track on bottom rail two track sliding frame wool pine for sliding sash and interlock, complete all as specified and as directed. Note: a) The unit rate quoted by the contractor included cost of glass and SS wire mesh. Net openning will be measured for payment purpose. b) Overall net size including frame will be measured for payment purpose) (Make : Okotech Aparno, H20 Solution, Fenesta or equavalent.

Box type Steel windows with hinges, steel handle, tower bolt and steel peg stay complete with glazing bars dovetailed or welded including a coat of red oxide after preparation of surface before fixing all as shown in drg No. TD-A sheet 1/3 to 3/3, complete all as specified and as directed.

Box type Steel windows with hinges, steel handle, tower bolt and steel peg stay complete without glazing bars dovetailed or welded including provision for AC/desert cooler opening and cover including a coat of red oxide after preparation of surface before fixing all as shown in drg No. TD-A sheet 1/3 to 3/3, complete all as specified and as directed.

Steel ventilators with centre hung shutters including steel handles and steel peg stay complete with glazing bars dovetailed or welded, complete all as specified and as directed.

Angle Iron sections as in roof trusses (framed), trussed purlins, rafters, standing poles, crane gantries, rails and fastenings and heavy brackets framing including distance pieces, cleats etc., conforming to Fe-410W Gde E- 250 quality A, complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

E-board 'Everest' make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction complete all as specified and as directed.

75mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing, complete incl demolition of existing PCC of any type all as specified and as directed.

Pre-polished, coloured chequered cement concrete tiles, factory made, Premium quality 250mm x 250mm x 20mm thick, set & jointed in neat cement slurry and pointed flush with grey cement and pigments to match colour of tiles in floors/path etc over 15 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed.

60mm thickness, M-35 Grade Machine pressed precast concrete interlocking paver block any shape and size with grey cement and no pigment confirming to IS 15658-2006, set in floors/hardstanding/path etc laid over 50mm thick sand cushioning layer, complete all as specified and as directed.

Machine cut kota stone slab 18-20 mm thick as in flooring laid over and incl cement screed bed 20 mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

75mm thick plain Cement Concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and fair at top without using extra cement and providing joints 40mm deep and 12 mm wide in plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete incl demolition of existing PCC all as and as directed.

Joint free anti skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile not exceeding 0.11Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over 15 mm thick average screed bed in cement mortar 1:4, complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surface 450mm x 300mm x 7-8 mm thick, such as skirting, dados, etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement, complete all as specified and as directed.

Preparation of new plaster internal wall and ceiling surfaces of upto 4 storey buildings, boundary walls and applying a layer of wall care putty, again sand papering thus making surface smooth and applying Two coats of Interior plastic emulasion paint premium quality over a coat of primer, complete all as specified and directed.

Preparation of newly plastered external surfaces of walls and ceiling and applying a layer of Birla White/J K White wall care putty, again sand papering to make surfaces smooth and applyingg Two coats of weather proofing exterior acrylic emulsion paint premium quality on wall surfaces over a coat of wall primer, complete all as specified and as directed.

M & L for two coats of synthetic enamel paint over new steel surfaces including preparation of surfaces of any description not otherwise decsribed over 10cm width or girth complete all as specified and directed.

Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.

Sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm.in each pane, complete all as specified and as directed.

Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, fixed in repair, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP

Brass chromium plated wall mixture 3 in 1 system with provision for hand shower and overhead shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-281KN Jaquar-Cat No. COP-281PM Kohler-Cat No. K-98754IN-4-CP

15mm bore brass chromium sink mixer of mixing 'Hot' and 'Cold' water, with swinging point screwed down for iron pipe, complete fixed in repairs all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-309KNM Jaquar-Cat No. COP-309PM Kohler-Cat No. K-37338IN-4CP

Bib taps, (Long body) cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe15mm bore, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-047KN Jaquar-Cat No. CON-107KN Kohler-Cat No.K-37341IN-4-CP

Ready made floor/wall mounted Vanity box made of HDHMR board, both side laminated, fixed in repairs, complete all as specified and as directed. consisting of the following combination :- (a) Wash Hand Basin 810mm x 500mm. (b) Base Cabinet 780mm x 485mm x 460mm. (c) Side Cabinet 300mm x 250mm x 1800mm. (d) Mirror cabinet size 780mm x 160mm x 800mm. Make : Hindware - Cat Part No. 70089 or 70084/ Kohler : Cat Part No. K-31602IN-E63

Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-059KN Jaquar-Cat No. COP-057PM Kohler-Cat No.K-80158IN-9-CP

Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc., complete all as specified and as directed.

Point wiring complete with 1.5 Sqmm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and including Metal flush box and top cover for fixing modular switches/sockets/fan regulator etc, and making good surface, complete all as specified and as directed for the following :- one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

All as per description of Srl item No. 64 here-in-before but for one socket outlet 5/6 Amps on same board.

All as per description of Srl item No. 64 here-in-before but for one socket outlet 5/6 Amps on independent board.

Switch piano 6 Amp, 1 way single pole, complete all as specified and as directed.

Socket two-in-one, 6 Amp universal type, 5pin, complete all as specified and as directed.

Fan regualtor piano type in steps, 120 volts, 5 Amps, complete all as specified and as directed.

Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps, complete all as specified and as directed.

Recess mounting 2x2 Square flat panel ultra slim scoop LED energy efficient light fittings 36/40 Watt warm/cool white with driver/transformer suitable for grid ceiling/Gypsum board/POP ceiling including making all electric connections, complete all as specified and as directed. Make : Syska/Polycab/Wipro/Firm

Ceiling fan1400mm sweep with copper wound motor, 240volts, 50Hz, 5 Star BEE rating, including taking down old unserviceable ceiling fans and depositing to MES Store yard of AGE EM, complete all as specified and as directed.

MCB DB confirming to IP 43 - IK 09 with double door, SPN 8 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces, complete all as specified and as directed. Make : IndoAsian/Legrand/Siemens

MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection, complete all as specified and as directed. Make : IndoAsian/Legrand/Siemens

MCB C Curve type, 10 kA, 40 to 63 Amp, Single Pole and neutralwith over load and short circuit protection, complete all as specified and as directed. Make : IndoAsian/Legrand/Siemens

Energy efficicent LED fittings 45W LED 6K suitable for street/builing area light pressure diecast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as specified and as directed. Make : Havells (Endura pearl Neo) Or equivalent in Philips/Wipro.

Street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 32 mm dia size light grade complete with nut, bolts, washer etc., inclusive of one primer coat, one under coat and one finishing coat of silver paint, complete all as specified and as directed.

Earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.