REPAIR/MAINT OF CERTAIN INTERNAL ELECTRICATION WORK SERVICE INCL REPLACEMENT OF VARIOUS UNSV LIGHT FITTINGS/ FIXTURES AND DB SWITCH INSIDE COD AND 505 ABW AREA UNDER GE NORTH DELHI CANTT

Amount

Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces complete all as specified and directed for one light / bell / buzzer point controlled by one, one way switch 06 amps complete all as specified and directed.

All as per the description of srl item No 02 above here-in-before but one fan point controlled by one, one way switch 06 amps.

All as per the description of srl item No 02 above here-in-before but one 3 pin, 06 amps socket outlet point on independent board controlled by one, one way 06 amps switch complete all as specified and as directed. .

All as per the description of srl item No 02 above here-in-before but one 3 pin, 06 amps socket outlet point on same board controlled by one, one way 06 amps switch complete all as specified and as directed.

All as per the description of srl item No 02 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sqmm single core FRLS cable for one 3 pin 15 amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

S&F switch piano flush type, 06 amps, single pole, one way, 230 volts complete all as specified and as directed.

S&F of switch piano type 2 way 5/6 amp, 230 volt, flush button single pole two way complete all as specified and directed by Engineer -in-Charge.

S&F switch piano flush type, 16 amps, single pole, one way, 230 volts with switch frame complete all as specified and as directed.

S&F socket outlet 2 in 1, 5 pin, 06 amps, flush type, 230 volts with socket frame complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin, 06 amps and 3 pin, 16 amps, flush type, 230 volts with socket frame complete all as specified and as directed.

S&F ding dong bell, AC, 230 volts, single pole complete all as specified and as directed.

S&F stepped type electronic fan regulator in 0-4 steps 230 volt AC flush type on the existing phenolic laminated sheet complete all as specified and as directed.

S&F ceiling rose, 6 amps, 230 volts, AC, ISI marked with three equal size terminals and PVC / polycarbonate insulated body of duly ISI marked complete all as specified and as directed.

M&L for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of modular metal flush box, modular white cover plate with frame, blanking plate etc suitable for mylinc / coral / sleek model accessories etc and making good to the disturbed surfaces complete all as specified and directed for one light point controlled by one, one way switch 06 amps complete all as specified and directed.

All as per the description of srl item No 15 above here-in-before but one bell point controlled by one bell push switch 06 amps.

All as per the description of srl item No 15 above here-in-before but one ceiling / exhaust fan point controlled by one, one way switch 06 amps.

All as per the description of srl item No 15 above here-in-before but one 3 pin, 06 amps socket outlet point on independent board controlled by one, one way 06 amps switch.

All as per the description of srl item No 15 above here-in-before but one 3 pin, 06 amps socket outlet point on same board controlled by one, one way 06 amps switch.

All as per the description of srl item No 15 above above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sqmm single core FRLS cable for one 3 pin 15 amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

S&F modular switch, 06 amps, single pole, one way, 230 volts, one module and IP 20 protection complete all as specified & directed.

S&F modular bell push with indicator, 06 amps, single pole, one way, 230 volts, complete all as specified & directed.

S&F modular switch, with indicator, 16 amps, single pole, one way, 230 volts, one module complete all as specified & directed.

S&F modular socket outlet 05 Pin, 06 amps, 02 module with shutter complete all as specified & directed.

S&F modular socket outlet 02 in 01, 03 pin, 06 amps and 16 amps, 02 module with shutter complete all as specified & directed.

S&F modular ceiling fan regulator, 02 module, AC, 230 volts, duly ISI marked complete all as specified & directed. Note:- Make/Model for srl Item 21 to 26 shall be as per existing at site.

S&F lamp holder, PVC / polycarbonate fancy type suitable for batten fitting including 9W LED bulb complete all as specified and as directed.

S&F in repairs 10/12w LED TL fitting (2 feet) attractive wall mounted type suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repairs on wall / ceiling LED batten lighting fixture 20 watts LED 5700K (4'), with extruded aluminium heat sink, integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete. Makes :- Eveready Cat Part No LEDBTA02016-02/Havells Cat Part No LUMILINEPLUSPROBS20WLED865SPCSSIND/Philips Cat Part No BN170CLED20S6500 PSUL120

S&F in reapairs decorative wall mounting light stainless steel finish fixture with extruded glass difuser suitable for up to 40 watt mini glass lamp, lamp holder, including 9 watts LED bulb for fixing in decorative wall mounting light and all accessories pre-wired including connecting up including taking down of existing u/s light fitting complete all as specified and directed.

S&F in repairs supply and fixing LED luminaire 600mm x 60mm x 70mm 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Makes :- Eveready Cat part No LEDPLB03616-03NS/ Havells Cat part No VENUSTREND2x2PLR36WLED865SWH/Philips Cat part No RC380BLED36S-6500G6L60W60PSU0DS1

S&F in repairs LED street light fitting 35 watt 230V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. pre-wired including connecting up with PVC insulated copper conductor cable 1.5sqmm, 3 core as required for connections and 50 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40mm x 5 mm flat iron clamps, nuts, bolts & washers complete all as specified and directed.

S&F in repairs LED street light fitting 72/75 watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. pre-wired including connecting up with PVC insulated copper conductor cable 1.5sqmm, 3 core as required for connections and 50mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40mm x 5 mm flat iron clamps, nuts, bolts & washers complete all as specified and directed. Makes:- Eveready Cat part No LEDSL07215-PC/Philips Cat pat No BRP032PLED75CWSLRPSUGRSPD/Havells Cat part No ENDURASUNBEAMSL72WLED757SASYTOPC

Taking down of existing unserviceable highbay lights and supply and fixing LED flood light 100 watt 230V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp and all accessories complete, arrangements for mounting of fitting i.e. bracket, clamps, nuts, bolts and washers etc all as per site requirement including connecting up with provision of PVC insulated copper conductor cable 1.5sqmm, 3 core as required for connections complete. Makes:- Eveready Cat part No LEDFL10015-04/Havells Cat part No JETALEGANZAFLS100WLED757P60DTOTG/Philips Cat part No BVP282LED120CWFGSY5WB100WV1

Taking down of existing unserviceable highbay lights and supply and fixing LED flood light 150 watt 230V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp and all accessories complete, arrangements for mounting of fitting i.e. bracket, clamps, nuts, bolts and washers etc all as per site requirement including connecting up with provision of PVC insulated copper conductor cable 1.5sqmm, 3 core as required for connections complete all as specified and directed. Makes:- Eveready Cat par No LEDFL15015-04/Havells Cat part No JETALEGANZAFLS150WLED757P60DTOTG/Philips Cat part No BVP283LED181CWFGSY5WB150WV1

M&L for sub main wiring with 2 x1.5 sqmm nominal cross sectional area, two single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 1.5 sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing including taking down existing submain wiring complete all as specified & directed, including taking down old sub main wiring. Note:- Two run for neutral and phase and one run for continous earth wire alongwith PVC conduit shall be measured as one unit length.

All as per the description of the srl item No 36 above but for 02 x 2.5 sqmm for phase & neutral and 01 x 2.5 sqmm for continuous earth wire Note:- Two run for neutral and phase and one run for continous earth wire alongwith PVC conduit shall be measured as one unit length.

All as per the description of the srl item No 36 above but for 02 x 4 sqmm for phase & neutral and 01 x 4 sqmm for continuous earth wire Note:- Two run for neutral and phase and one run for continous earth wire alongwith PVC conduit shall be measured as one unit length.

All as per the description of the srl item No 36 above but for 04 x 6 sqmm for 3 phase & neutral and 01 x 6 sqmm for continuous earth wire Note:- Three run for phase, one run for neutral and one run for continous earth wire alongwith PVC conduit shall be measured as one unit length.

S&F in repairs industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 230 volts of 20 amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed.

S&F in repairs industrial type TPN enclosure with a three pin and neutral and earth plug and socket complete with and including 32 amps MCB, four pole, AC, 415 volts and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed.

S&F in repairs industrial type TPN enclosure with a three pin and neutral and earth plug and socket complete with and including 63 amps MCB, four pole, AC, 415 volts and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed.

S&F in repairs sheet metal enclosure distribution board, single pole and neutral, AC, 230 volts, 08 way, with 200 amps rated copper bus bar and metal double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed.

S&F in repairs sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volts, 04 ways with 200 amps rated copper bus bar and metal door with IP 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed with and incl. of followings :- (a) MCCB, 125 amps, 04 pole, AC, 415 volts,16 KA - 01 No. (b) MCB, SP, AC, 230 volts of 06 to 32 amps, "C" curve, 10 KA - 12 Nos.

S&F in repairs sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volts, 06 ways with 400 amps rated copper bus bar and metal door with IP 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed with and including of the following:- (a) MCCB, 250 amps, 03 pole, AC, 415 volts, 25 KA - 01 No. (b) MCB, SP, AC, 230 volts of 63 amps, "C" curve, 10 KA - 20 Nos.

S&F in repairs MCB, SP, AC, 230 volts of 06 to 32 amps capacity "C" curve, 10 KA breaking capacity and making connections by using copper lugs complete all as specified and directed.

S&F in repairs MCB, DP, AC, 230 volts of 40 amps capacity "C" curve, 10 KA breaking capacity and making connections by using copper lugs complete all as specified and directed.

S&F in repairs MCB, DP, AC, 230 volts of 63 amps capacity "C" curve, 10 KA breaking capacity and making connections by using copper lugs complete all as specified and directed.

S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 200mm to 250mm, cutting of hole in wall, making of wooden frame, all arrangements for mounting of fan including making good of disturbed surface etc including taking down old existing exhaust fan complete all as directed

S&F exhaust fan made of sturdy Eengineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300mm, cutting of hole in wall, making of wooden frame, all arrangements for mounting of fan including making good of disturbed surface etc including taking down old existing exhaust fan complete all as directed

S&F in repairs MCCB, 63 amps, 03 pole, AC, 415 volts of 16 KA breaking capacity complete all as specified and directed.

S&F in repairs MCCB, 100 amps, 03 pole, AC, 415 volts of 16 KA breaking capacity complete all as specified & directed.

S&F in repairs MCCB, 125 amps, 03 pole, AC, 415 volts of 16 KA breaking capacity complete all as specified and directed.

S&F in repairs MCCB, 160 amps, 04 pole, AC, 415 volts of 36 KA breaking capacity complete all as specified and directed.

S&F in repairs MCCB, 200 amps, 04 pole, AC, 415 volts of 36 KA breaking capacity complete all as specified and directed.

S&F in repairs MCCB, 250 amps, 04 pole, AC, 415 volts of 36 KA breaking capacity complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 25 sqmm, 2 core, 1100 volts grade, heavy duty, multi-stranded, PVC insulated, aluminium conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed service cable for service connections from existing LT panel/pole to DB/busbar chamber including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing including taking down existing cable complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 50 sqmm, 3.5 core, 1100 volts grade, heavy duty, multi-stranded, PVC insulated, aluminium conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed service cable for service connections from existing LT panel/pole to DB/busbar chamber including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing including taking down existing cable complete all as specified and directed.

S&F air circulator fan, steel body AC single phase. 230V oscilating suitable for wall mounting of size 450mm sweep heavy duty complete and taking down old one with and includig all arrangements for mounting of fan including making good of disturbed surface etc complete all as specified and directed. Note:- The old retrieved fan shall be deposited in E/M store yard.

Taking down exhaust fan any make carefully, supply and fixing exhaust fan steel body AC single phase 230 volts of size 600mm sweep heavy duty with blade and frame and louvers complete all as specified and as directed. Note:- The old retrieved fan shall be deposited in E/M store yard.

Supply, installation, testing and commissioning of 1200mm sweep, BEE 5 star rated, ceiling fan with brush less direct current (BLDC) motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 Nos canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CMM/W) minimum 6.85, air delivery minimum 220 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230v, 50 Hz, single phase AC supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose including taking down old existing exhaust fan complete all as specified and directed. Note:- The old retrieved fan shall be deposited in E/M store yard.

S&F exhaust fan, steel body AC single phase. 230V of size 450mm sweep heavy duty with, blades, and frame and louvers and taking down old exhaust fan and depositing to MES store yard, all arrangements for mounting of fan including making good of disturbed surface etc complete all as specified and directed.

S&F exhaust fan, steel body AC single phase. 230v of size 300mm sweep with, blades, and frame and louvers and taking down old exhaust fan and depositing to MES store yard all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed

M&L for earthing complete with galvanised mild steel earth plate electrode 60cm x 60cm x 6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR Part-I (2009) and connecting to main switch board / main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, angle iron 40mm x 40mm x 3mm frame for pit cover including testing on completion complete all as specified. Note:- On testing after completion if the desired earth resistance is not obtained, the earthing will be redone at no extra cost. Note:- All works to be executed in restricted Area and in bldgs upto 15 mtrs height, quoted rates deemed to be included all T&P required at site and limited working hours as applicable.

NEETU TRADERS (INDIA) (BID ID -3408919)

PARMAR ENTERPRISES (BID ID -3413366)

Shiv Enterprises (BID ID -3412822)

M/s Shri Shyam Bharat Builders (BID ID -3407943)

PARADISE INFRA POWER COMPANY (BID ID -3411362)

SANJEEV ENTERPRISES (BID ID -3411059)

Ruchi enterprises (BID ID -3413388)