Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.4 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹48.9 L+₹2.1 L (4.53%)Rejected-Finance STALIN NAGAR PANIGHATA ROAD PO BAGDOGRA DIST DARJEELING WB | BAGDOGRA | DARJEELING | WEST BENGAL | 734422 | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹48.9 L+₹2.1 L (4.58%)Rejected-Finance UPPER BAGDOGRA PO BAGDOGRA DIST DARJEELING PIN 734014 WB | BAGDOGRA | DARJEELING | WEST BENGAL | 734014 | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹49.0 L+₹2.2 L (4.79%)Rejected-Finance OPPOSITE GATE NO 2 NORTH BENGAL UNIVERSITY PO N B U DIST DARJEELING WB | DARJEELING | DARJEELING | WEST BENGAL | 734013 | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹49.7 L+₹3.0 L (6.32%)Rejected-Finance 174 BAKSARA L M C SARANI JAMRULTALA HOWRAH WEST BENGAL 711110 | HOWRAH | WEST BENGAL | 711110 | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹43.4 L
EMD Value
₹86,800
Closing Date
18 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BENGDUBI
Bengdubi Military Station PO-Bengdubi, Dist-Darjeeling, Pin 734424
SPL REPAIR TO BLDG NO T 125 T 128 PROVN OF URINAL POINT AND DRAINAGE SYSTEM WITH COVERED CEMENTED SEPTIC TANK AT GRTE UNDER AGE B R II OF GE BENGDUBI MIL STN
2022_MES_540369_1
8380/E8
Open Tender
Civil Works
Item Rate
240 days
GE BENGDUBI
MES Enlisted/ Un-enlisted contractor of Class D and above with category a(i)
8 documents required · 8 mandatory
₹500
GE BENGDUBI
₹86,800
Yes
9 Sept 2022
23 Jul 2022
20 Aug 2022
23 Jul 2022
18 Aug 2022
6 Aug 2022
25 Jul 2022 - 30 Jul 2022
Amount
SCHEDULE 'A' PART-I (B/R WORKS)
Dimantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges, valley gutter etc, complete all as specified and directed.
Dismantling of plain or corrugated steel sheets any gauge, thickness including Nanital or similar pattern in roof coverings including ridges, hips and valley gutter all as directed.
S&F Pre-painted coloured trapezoidal profiled Galvalume / Zincalume sheet with min thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, AI Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted coloured plain Galvalume / Zincalume sheet with min thickness of 0.60 mm TCT confirming to IS-513 (AZ-150 GSM, AI Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof ridge /valley gutters fixed with Galvanised self drilling self tapping fastener (12-14 x 55 with EPDM seals) complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position like trusses, rafters, purlins etc. complete all as specified and directed.
Ditto in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.
S&F for rolled sections as in main and cross beams, hip and jack rafters; purlins, Gusset plate and base plates, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe-410-W (gde -E-250) quality 'B' includng welding or riveting etc complete all as specified and as directed
M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe.410-W (Gde-E-250) quality-'B' complete all as specified and directed.
M&L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc.for post (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming Fe-410W(GdeE-250) quality B complete all as specified and directed.
S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe.410-W (Gde-E-250) quality-A complete all as specified and directed.
S&F Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc. 22.5cm and n. exc. 30cm long and dia of neck from 11mm to 15mm complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets, and existing frame work also, complete all as specified and directed.
S&F Decorated PVC False ceiling of size 595mm X 595mm X 5 mm thick, used as a panel insert in a frame work made using GI T-section of size 25mmX25mm in square pattern of grid size 600mmX600mm. The GI frame work is supported from the ceiling with the help ceiling cleat made out of GI flat 40x3mm size 60mm long expension hold fasteners 12.5mm dia 40mm long to maintain the proper levels etc. The GI frame work is supported on side wall with the use of powder coated GI L section of size 25mmX25mm angle complete all as specified and directed.
S&F standard aluminium powder coated section(minimum thickness of powder coating shall be 50micron and colour shall be as approved by the GE) as in frame, shutters for doors, windows / ventilators, Fixed/ Openable / side hung/ sliding two or three track or in any pattern, partitions, kitchen cabinate, kitchen almirah, etc cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc, complete all as specified and directed. Notes:- (i) Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. (ii) The accessories Aluminium mongries etc) required to be provided for windows, vents and doors as per directions of Engineer-in-charge shall be provided but weight for the same shall not be considered. (iii) Cost of all the items / accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wire cloth shall be measured and paid separately under respective items.
M&L for providing 25mm thick PCC (1:2:4) type B1 (using 12.5mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings n.exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.
M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. over 15mm thick screed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
Ditto all as per item No 19.00 above but for vertical surfaces such as skirting etc, over and including 10mm thick back coat in CM 1:4 complete all as specified and directed.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry @ 3kg/Sqm and pointed in white cement mixed with pigments to match with the shade of tiles, over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for Glazed ceramic tiles of size 300mmx 450mm , 6 to 7 mm thick on the vertical surfaces such as in skirting / dado etc, set and jointed in neat cement slurry @ 3kg/Sqm and pointed in white cement mixed with pigment to match with the shade of the tiles, over and including 10mm thick cement mortal backing coat in CM 1:4 complete all as specified and and as directed.
M&L for 18-20 mm thick Machine cut, kota stone slab (table rubbed) (moulded exposed edge) in flooring over including 20mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding the edges half round and polishing including etc complete all as specified and directed.
M&L for 18-20 mm thick Machine cut, pre-polished kota stone slab (single piece) in skirting, landing, risers and trads of steps (including making 3 groves on kota stone treads over including 15mm thick screed bed in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc complete all as specified and directed.
M&L for 15mm thick machine cut, pre-polished black jet, premium quality granite stone slab in skirting, Kitchen platform /dado etc laid over including 15mm thick screed bed in CM 1:4, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc complete all as specified and directed.
Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.
M&L for brick work with fly ash brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and directed.
M&L for brick work with fly ash Bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, fixing of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed including formwork if required complete all as specified.
Taking down cement plaster any description on brick or stone walls including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for Rendering 15mm on fair faces of brick or concrete external surfaces in cement mortar 1:4 with water proofing compund as per manufacurer's instructions, finished surfaces fair and smooth without using extra cement complete all as specified and directed. (Note: - WPC shall be measured and paid separately under relevent items.)
M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed
Supply only water proofing compound (Liquid) complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not exceeding 15cm thick, including removal of debris outside MD land complete all as specified and directed.
Use & Waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surface of concrete complete all as specified and directed.
Use & Waste of formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished surface of concrete complete all as specified and directed.
M&L for for reinforced cement concrete 1:2:4. type B-1 using 20mm graded crushed stone aggregate Beams, cantilevers, bressummers, lintels over 1.5m span etc all as specified and directed.
M&L for reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate in chajjas and in shelves and the like complete all as specified and directed.
M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
All as per item No. 39.00 here-in-before but 8 mm dia
All as per item No. 39.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6, type C-2 using 40mm graded crushed stone aggregate as in sub base floor and plinth protection finishes all as specified.
M&L for PCC 1:3:6, type C-1 using 20mm graded crushed stone aggregate in filling in back of chowkat and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified.
Taking down chowkats or frames n exc 1.5 Sqm each (with out taking off shutter from the frame) and removing material from the site of work complete all as directed.
Taking down chowkats or frames exc 1.5 and n exc 4.0 Sqm each (with out taking off shutter from the frame) and removing material from the site of work complete all as directed.
Taking down old unserviceable of any description exc 1.0 and n exc 2.0 Sqm each and removing material from the site of work complete all as directed.
S&F 1.25 mm thick pressed steel frame of size 165 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and directed.
S&F 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and directed.
S&F Factory made 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.
S&F 2nd class hard wood 30 mm thick made glazed and skeleton shutters open rebated and prepared to divided into square with plain chamfered rounded mitred and rebated, without sash bar, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F factory made solid panelled PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and joined together with solvent cement etc complete all as shown on drg at Srl page No 176 of MES Schedule Part-II(2020), complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F 150mm long aluminium alloy handle, cast type anodised (ISI Marked) complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section with 100 mm long bolt (ISI Marked) complete all as specified.
S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt (ISI Marked) complete all as specified.
S&F aluminium alloy, anodised sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and directed.
S&F 100 mm thick butt hinges, medium weight, stainless steel and fixed etc complete all as specified and directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as specified and directed.
S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and directed.
S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
Cutting holes in brick walls builtin in cement mortar for inserting holdfasts and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required all as specified.
M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st grade quality) complete all as specified and as directed
M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint (1st grade quality) over coat of red oxide primer complete all as specified and directed.
M&L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over (1st grade quality) a coat of pink primer etc complete all as specified and directed.
M&L for preparation of newly plastered surfaces and applying two coat Birla/Asian wall care putty and two coats of oil bound distemper of approved tint over a coat of primer on wall over complete all as specified and directed.
M&L for complete removal of existing treatment of wall and applying two coat Birla/Asian wall care putty and two coats of oil bound distemper of approved tint over a coat of primer on wall over complete all as specified and directed.
M&L preparing newly plastered surfaces of wall and applying two coat Birla/Asian wall care putty and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.
M&L complete removal of existing treatment of wall and applying two coat Birla/Asian wall care putty and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.
Making good under cills or over arches, lintels and bressummers, including allpinning when necessary complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for including removal of debris outside MD land complete all as specified and directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
Excavation over areas not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.
All as per Item no 73.00 here in before but exceeding 1.5 mtr not exceeding 3.0 mtr deep complete all as specified.
Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.5 mtr deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc and getting out in soft/loose soil complete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed.
Removing excavated material (soil) to a distance exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.
Removing excavated material (soil) to a distance exc 250m but not exc 500m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.
M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and directed.
M&L for sand filling ubder floor or in foundations including watering and consolidation complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.
M&L 40mm thick PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in flooring, finshed even and smooth without using extra cement complete all as specified and directed.
S&F Vitreous china urinal, squatting plate type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urianl against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. (Make: Hindware/Cera/Parryware)
S&F stop valve 15mm bore, cast copper alloy with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F bib tap, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15 mm bore, complete all as specified and directed.
S&F PVC connection of 15mm dia 45 cm length including two PVC PTMT nuts at ends with rubber washer complete all as specified and directed.
Supplying and fixing of CPVC pipes of 20mm dia SDR 11 & Plain CPVC SDR 11 fittings in wall/ceiling or laying in floor complete all as specified and directed.
Supplying and fixing of CPVC pipes of 25mm dia SDR 11 & Plain CPVC SDR 11 fittings in wall/ceiling or laying in floor complete all as specified and directed.
Supplying and fixing of CPVC pipes of 32mm dia SDR 11 & Plain CPVC SDR 11 fittings in wall/ceiling or laying in floor complete all as specified and directed.
Supplying and fixing of CPVC pipes of 40mm dia SDR 11 & Plain CPVC SDR 11 fittings in wall/ceiling or laying in floor complete all as specified and directed.
Supplying and fixing of CPVC brass elbow 25mm dia SDR 11 in wall/ceiling or laying in floor complete all as specified and directed.
Supplying and fixing of CPVC brass tee 20mm dia SDR 11 in wall/ceiling or laying in floor complete all as specified and directed.
Supplying and fixing of CPVC Male Brass Threaded Adaptor (MTA/ MBTA) 20mm dia SDR 11 in wall/ceiling or laying in floor complete all as specified and directed.
Supplying and fixing of CPVC Ball valve 20mm dia SDR 11 in wall/ceiling or laying in floor complete all as specified and directed.
Supplying and fixing of CPVC Ball valve 32mm dia SDR 11 in wall/ceiling or laying in floor complete all as specified and directed.
Supplying and fixing of CPVC Tank Adaptor 32mm dia SDR 11 in wall/ceiling or laying in floor complete all as specified and directed.
S&F 110 mm dia PVC (SWR`) pipes single socketed in any length with rubber rings joints laid in trenches or in floors with leakproof joint as per manufacurerer instructions complete all as specified.
S&F 110mm bore PVC (SWR) bends any radius with oval access door, fixed with leakproof joint as per manufacurerer instructions complete all as specified.
S&F 110 mm dia PVC (SWR`) pipes single socketed in any length with rubber rings joints fixed to walls with leakproof joint as per manufacurerer instructions complete all as specified.
S&F 110mm bore PVC (SWR) 'P' or 'S' trap fixed with leakproof joint as per manufacurerer instructions complete all as specified.
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, fixed with leakproof joint as per manufacurerer instructions complete all as specified.
S&F 110mm bore PVC (SWR) bends any radius, fixed with leakproof joint as per manufacurerer instructions complete all as specified.
S&F 75mm dia PVC (SWR`) pipes single socketed in any length with rubber rings joints fixed to walls with leakproof joint as per manufacurerer instructions complete all as specified.
S&F 75mm bore PVC (SWR) bends any radius, fixed with leakproof joint as per manufacurerer instructions complete all as specified.
S&F grating doom 100mm dia of PTMT (minimum weightt 25 gm) for floor trap/nahani trap complete all as specified and directed.
M&L for precast RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed.
M&L for Plain cement concrete 1:3:6 type C-2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200mm bore complete all as specified and directed.
M&L for Salt glazed stone ware (SGSW) drain pipes laid in trenches and jointed as specified in 150mm internal dia of pipe grade 'A' complete all as specified and directed.
Cutting salt-glazed stoneware drain pipe in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar(1:1) 150mm internal dia of pipe complete all as specified and directed.
S&F in repairs Salt-glazed stoneware gully traps, square or round mouthed, type `P' of size 150x150 including for conecting to drains and setting in cement mortar 1:1 complete all as specified and directed.
Cutting into existing manholes for connecting new drains (150mm dia of pipe), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
M&L for broken bricks loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.
S&F 100 dia cast iron soil (sand cast), waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floorscomplete all as specified and directed.
S&F 100 mm dia cast iron vent cowl complete all as specified.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.
SCHEDULE 'A' PART-II (E/M WORKS)
Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants, regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface of walls, floors etc as per existing specification complete all as specified and directed.
M&L for concealed point wiring One light point/one fan/light/bell point controlled by one switch with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200mm x 300mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface all as specified and directed.
All as per item No 119.00 here-in-before but One 3 pin socket outlet, 5 Amp on independent board all as specified and directed.
All as per item No 119.00 here-in-before but One 3 pin socket outlet, 5 Amp on same board all as specified and directed.
All as per item No 119.00 here-in-before but for one 15 Amp 3 pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLSH) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire complete all as specified and as directed.
S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin, 5 Amp, complete all as specified and directed.
S&F Switch socket combination multipurpose 2 in 1, 5Amp flush type complete all as specified and directed.
S&F Switch socket combination multipurpose 3 pin 16A and one 3 pin 6Amp 5 in 1 flush type complete all as specified and directed.
S&F Ceiling rose, 3 way PVC insulated body complete all as specified and directed.
S&F ceiling fan regulator electronic stepping type flush type ( 2-Module) including necessary electric connection complete all as specified and directed.
S&F LED Tube Light luminaries with high performance LED with driver 1 x 18W (4 Feet long, Cool day/Warm white) complete all as specified and directed. (Make:- Havells/Crompton/Philips)
S&F LED Tube Light luminaries with high performance LED with driver 1 x 9W (2 Feet long, Cool day/Warm white) complete all as specified and directed. (Make:- Havells/Crompton/Philips)
S&F Building security LED light luminaire fitting 1X20W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLSH) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clam made out of MS flat of size 25X3 mm, 4 nos Anchor Bolt of suitable size etc all as specified and directed. (Make:- Havells/Crompton/Philips)
S&F Exhaust Fan made of sturdy Engineering plastic with louvers of Size 250mm sweep, 230Volts AC, 50 Hz, 1200RPM, copper winding with connection from existing ceiling rose complete all as specified and diercted.
Taking down of Old MCB DB / control box any type any size including MCBs and separating the serviceable MCB DBs and MCBs for reuse at site complete all as specified and directed.
S&F Sheet metal enclosure for MCB DB double door single pole & Neutral 4 way with common bus bar at incomming end complete all as specified and directed. (Make:Legrand/havells/L&T/ABB).
S&F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incomming end complete all as specified and directed. (Make:Legrand/havells/L&T/ABB).
S&F MCB 'C' series single pole & neutral 6 to 32 Amps, breaking capacity 10KA, complete all as specified and directed. (Make: Legrand /L&T/ C&S/ Indoasian)
S&F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. (Make: Legrand /L&T/ C&S/ Indoasian)
Taking out Old un-serviceable / faulty cable of any size from trench / pole complete all as specified and directed.
M & L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 16 Sqmm 2 core laid in trench/pole/on wall completer all as specified and directed. Make:polycab/finolex/Havells.
M & L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 10 Sqmm 2 core laid in trench/pole/on wall completer all as specified and directed. Make:polycab/finolex/Havells.
M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated (punned) upto 180mm thickness complete all as specified and as directed.
Material and labour well burnt old size sub Class ‘B’ bricks, laid flat, in trenches for cable protection complete all as specified and directed.
M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised iron earth lead wire 4.00 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron or steel, GI earth wire protected by 15mm bore light grade GI pipe and other end connected to earthing test point or main switch board as directed including funnel with watering pipe of 20mm bore light grade GI, wire mesh, charcoal or coke and common salt in alternate layer of 15cm compacted thickness all around the earth electrode PCC (1:3:6) type C-1 earth pit, cast iron cover and frame, including necessary excavation and earth work and refilling of black soil good conductor of earth and necessary testing complete all as specified and directed and shown on electrical plate No 3 of MES Schedule Part-I complete all as specified and as directed.
(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 1,22,714.00 (refer Tender Srl Page No 45). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’
M/S CONTRACTS
SHRI S K BHATTACHARJEE
M/S Vaishno Constructions
MS CHOWDHURY ENTERPRISE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .