SPL REPAIR TO INTERNAL ROADS OF NO 1 TT WG AMC CC UNDER GE (EAST) LUCKNOW

Amount

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous primer @ 5 kg per 10 sq m, putting in premix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cu m of sand), again well rammed (including supply of premix binder and sand) depth of potholes n exc 30 mm using paving bitumen VG 30 grade including rolling complete all as specified.

Scarifying or picking gravelled macadam or bituminous macadam surfaces area n. exc 400 sqm and depth exc 50 mm but n exc.100 mm complete all as specified and directed.

M&L preparing black top surfaces by brushing with wire brushes for removing caked mud etc and using mechanical compressor to remove all loose dirt etc and applying evenly a tack coat with bituminous primer using paving bitumen VG 10 grade at 5 Kg per 10 Sqm with paving bitumen for laying bituminous macadam all as specified and directed.

M&L for premix bituminous macadam laid / rolled and compacted to reqired gradient and camber (consolidated thickness 75mm or less) by using paving bitumen VG 30 @4% by weight of total mix,using 8 to 12 tonne power roller ,complete all as specified and as directed.

M&L for Bituminous premix semi dense asphaltic concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix, using hot mix plant and spreading with machenical paver, rolled and compacted to required camber and gradient and for uniform smooth surface by using power roller 8 to 12 tonne capacity complete all as directed and directed.

M&L for laying 2.5mm thick hot applied thermo plastic road marking painting uniform thickness with glass beads as per clause No 803 of MOST specification including cleaning of road surface heating of material within specified temperature limit for marking with necessary arrangement complete all as specified and directed.

S & F 'Cat Eye' in size of width n.exc 130mm and hight n.exc 20mm made of strong engineering high impact resistant polymer with electronic welded lenses for retor reflective in dry and wet weather condition along with bituminous adhesive complete all as specified and directed.

Supply and fixing in repair road delineator made of M.S pipe having 75mm outer dia, thickness 1.4mm and 1200mm length,duly powder coated in black/white colour and to be embedded in PCC 1:3:6 Type C2(using 40mm graded stone aggregate) with 3 nos x75mm high intensity prismatic(HIP) reflective tapes and MS pipe having powder coated jali & mesh for reflector portion & for anti theft.Below the reflective band of red/yellow/white colour high intensity micro prismatic type - IV tape (As per IRC 67/2010) of 75 mm each shall be provided complete all as specified and directed. Note: Necessary excavation for embedding of M S delineator shall be deemed to be included in the rate quoted against this item.

BHARAT ASSOCIATES PVT LTD

M/s Ram Singh Agarwal

Jaya Construction

RAJEEV ENTERPRISES