Upgradation and improvement of Lakhanpur / Basantpur pump house building including Rest House Part (A) Lakhanpur.

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 150, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5coarse) Sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 Sq m and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with in 50 m lead a/ with cement mortar 1:4(1Cement: 4 coarse sand)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class kail wood. (30 mm thick)

Providing and fixing panelling or Panelling and glazing in panelled or panelled and glazed shutters for doors , windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured ). Panelling for panelled or panelled and glaze shutters 25mm to 40mm thick

Decorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing walls with textured exterior paint of required shade: Old work (two or more coats on existing cement paint surface applied @ 3.28 ltr/10sqm)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give and even shade, one or more coats on old work.

Precast terrazzo tiles 22mm thick with graded marble chips of size upto 12 mm, laid in floors, and landing, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing polishing and curing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Light shade using white cement

Extra if cut tiles other than half tiles are used in risers of steps, skirting and dado.

Providing and fixing white vitreous china Pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Engagement of labour for removing of old tanks and cleaning of sewerage pipes etc.

Providing and placing on terrace (at all floor levels ) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Engagement of carpenter for repairing the existing doors and windows.

Engagement of fitters for repairing the water supply (line of rest house)

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i)75 mm diameter

Supply of C.P brass long nose bibcock 15 mm

Supply of Piller cock C.P Brass basin mixer pillar tap 15 mm

Supply of of CP brass fittings

(i) C.P brass angle valve 15 mm

(ii) C.P Brass bibcock 15 mm

Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works.

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats.

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 250x10 mm

Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete. 125x64x1.90mm

Carriage of sand and stone aggregate below 40mm nominal size from source to site of work av.15KM by Mech. Transport

ANIL SHARMA