Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.6 LAccepted-AOC HIMACHAL PRADESH | SOLAN | HIMACHAL PRADESH | 171102 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹16.6 L+₹10,591.40 (0.64%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹16.7 L+₹21,691.67 (1.32%)Rejected-Finance R O RIHAAN VILLA SHAKTI VIHAR PANTHAGHATI SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | L3 | Rejected-Finance Rejected | |
| 4 | Rejected-Technical | - | Rejected-Technical Rejected |
Tender Value
₹16.0 L
EMD Value
₹32,100
Closing Date
14 Feb 2024, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer R B M C Shimla
Executive Engineer R B M C Shimla
C O park at RD 0 49 towards valley side road leading to Beer Khana from Bye pass road in ward No 34 Kanlog
2024_MC_85185_27
24-356-60Dated29012024
Open Tender
Civil Works
Item Rate
90 days
Shimla
please refer tender documents
7 documents required · 7 mandatory
₹500
Executive Engineer R B M C Shimla
₹32,100
28 Mar 2024
6 Feb 2024
15 Feb 2024
6 Feb 2024
14 Feb 2024
6 Feb 2024
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. Ordinary rock
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock
Carriage of material by mechanical transport including Loading & unloading & stacking of Muck/Debries in M.C. Dumping site at bharyal free of cost Tansporation charges will be paid extra (10km)
Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : Modular Brick work using Common burnt clay buidings works in foundation and plinth
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing and laying heavy duty precast cement concrete Grass Grit pavers Block Size 400x300x60 mm thick Block made by making machine with strong viberatory compaction and ofapproved size and design/shape laid in required gray or coloured over sub base of concrete with 25mm thick or thickness of C.C. 1:4 (1 cement : 4 sand) laid over with near cement sulury mixed with pigment to match the shade of block completed
Providing and fixing Ornametal raililng built up with M.S angle 50x50x5 mm and Squre bar 10 mm size 1.66x0.60 mtrs standerd size, design/weight then 85 kg per pannel
Supplying and stacking of good earth at site including royalty and carriage upto 100 metres on head load and 1 km. By mechanical transport (earth measured in stacks will be reduced by 20% for payment)
Supplying and stacking sludge at site including royalty and carriage upto 100 metres by head load and 1 km. By mechanical transport (Sludge measured in stacks will be reduced by 8% for payment)
Mixing earth and sludge or manure in proportion of Park as directed by Engineer -in-charge
Spreading sludge dump manure or/and good earth in required thickness (cost of sludge, dump manure or/and good earth to be paid seperately).
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
Stone soling properly hand packed filling interstices with kharanja stone and consolidating with power road roller to the required gradient and comber including spreading, watering and rolling of binding materials moorum or earth etc. complete as per HPPWD specification. 100mm spread thickness (finished work including materials and labour)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)
Elliptical exerciser: Providing, designing and fixing elliptical exerciser of size 1200 X 540 X 1600 mm fabricated with main post of 114 mm dia and 2.5mm thick L shape pipe is dia 88 mm thickness 2.75mm, Swing Arm is dia 33 mm thickness 2.75mm, The rest pipe is 2.75mm, PVC Handle and dia 33mm, Nylon footrest thickness 6mm, rest pipe is thickness 2.75mm having, bottom plate 260 mm dia with thickness 12.00 mm with ABS Cap/ Cover.all pipes made up of hot rolled tubular steel and pre galvanized, having Oil degreasing treatment and Sand Blasting De-rusting treatment must be used before powder coating treatment with baking temperature of more than 200 degree Celsius, using high quality paint Nippon or equivalent of 90 - 120 micron thickness to prevent any damage from weather conditions. All joints of pipe should be cut by CNC laser cutting and robotic welded, with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Foothold shall be made up of steel 3.00 mm thick / Nylon 6.00 mm thick, with rounded edges to prevent any impact of injury and welded/ attached to main structure for vandalism proof design and long life. Bearing No 6205 and 6305 used shall be maintenance free, duly oil sealed and self-lubricated made by reputed company. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by Steel/ LLDPE caps for user safety. The Equipment must conform the Quality Standards EN 16630 :2015. The equipment must have TUV certification in the manufacturing process. The equipment shall be fixed on ground with concrete of minimum strength M-25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete with Defect Liability Period of Three years
Air Walker: Providing, designing and fixing of Air-Walker of size 1100x550x1480 mm fabricated with main post of 114 mm dia and 3.00 mm thickSwing leg is dia 48 mm thickness 2.75mm, Handle beam is dia 42 mm thickness 2.75mm , and other pipes of 2.75 mm thick having bottom plate 260 mm dia with thickness 12.00 mm with ABS Cap/ Cover, all pipes made up of hot rolled tubular steel and pre galvanized, having Oil degreasing treatment and Sand Blasting De-rusting treatment must be used before powder coating treatment with baking temperature of more than 200 degree Celsius using high quality paint Nippon or equivalent of 90 - 120 micron thickness to prevent any damage from weather conditions. All joints of pipe should be cut by CNC laser cutting and robotic welded, with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Foothold shall be made up of steel 3.00 mm thick / Nylon 4.00 mm thick, with rounded edges to prevent any impact of injury and welded/ attached to main structure for vandalism proof design and long life. Bearing No 6205 used shall be maintenance free, duly oil sealed and self-lubricated made by reputed company. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by Steel/ LLDPE caps for user safety. The Equipment must confirm the Quality Standards EN 16630:2015. The equipment must have TUV certification in the manufacturing process.The equipment shall be fixed on ground with concrete of minimum strength M-25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete with Defect Liability Period of Three years .
Arm Wheel: Providing, designing and fixing of arm wheel in a pair of size 850x800x1800 mm fabricated with main post of 114 mm dia and 3.00 mm thick , Yellow sleeve diameter 159 mm thickness 8.00 mm, Wheel pipe dia 33 mm thickness 2.75 mm and rest of the pipes 2.75mm thick having bottom plate 260 mm dia with thickness 12.00 mm with ABS Cap/ Cover , all pipes made up of hot rolled tubular steel and pre galvanized, having Oil degreasing treatment and Sand Blasting De-rusting treatment must be used before powder coating treatment with baking temperature of more than 200 degree Celsius using high quality paint Nippon or equivalent of 90 - 120 micron thickness to prevent any damage from weather conditions. All joints of pipe should be cut by CNC laser cutting and robotic welded, with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. No 6205 used shall be maintenance free, duly oil sealed and self-lubricated made by reputed company, Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by Steel/ LLDPE caps for user safety. The equipment must confirm the Quality Standards Such as DIN 79000 and EN 16630. The equipment must have TUV certification in the manufacturing process. The equipment shall be fixed on ground with concrete of minimum strength M-25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete with Defect Liability Period of Three years .
Sit Up Station: Providing, designing and fixing of double sit-up station of size 1500x1150x650 mm fabricated with main post of 114 mm dia and 3.00 mm thick,Yellow sleeve dia 159 mm thickness 8.0mm, Connecting pipe dia 33 mm thickness 3.0mm and rest of the pipes are 2.75 mm thick,having bottom plate 260 mm dia with thickness 12.00 mm with ABS Cap/ Cover,all pipes made up of hot rolled tubular steel and pre galvanized, having Oil degreasing treatment and Sand Blasting De-rusting treatment must be used before powder coating treatment with baking temperature of more than 200 degree Celsius using high quality paint Nippon or equivalent of 90 - 120 micron thickness thickness to prevent any damage from weather conditions. All joints of pipe should be cut by CNC laser cutting and robotic welded, with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat shall be made up of steel pipe 2.75mm thick , with rounded edges to prevent any impact of injury and welded/ attached to main structure for vandalism proof design and long life. All open ends of pipe to be closed by Steel/ LLDPE caps for user safety. The Equipment must confirm the Quality Standards EN 16630:2015. The equipment must have TUV certification in the manufacturing process. The equipment shall be fixed on ground with concrete of minimum strength M-25 with J-bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete with Defect Liability Period of Three years
SANDEEP KUMAR RANAIK
Bhagat Singh Thakur
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .