Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.0 LAccepted-AOC | L1 | Accepted-AOC Accepted being lowest | |
| 2 | L2₹28.8 L+₹1.8 L (6.68%)Rejected-AOC | L2 | Rejected-AOC Rejected being other than lowest | |
| 3 | L3₹33.1 L+₹6.1 L (22.7%)Rejected-AOC | L3 | Rejected-AOC Rejected being other than lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
1 Feb 2020, 6:00 pmClosed
Lt Col Vipin Kumar Singh
GE (S) Ahmednagar, Military Engineer Services, Ahmednagar- 414002
REPAIR / MAINT OF CEILING FANS, EXHAUST FANS, WALL FANS, TABLE FANS, GEYSERS ETC AND INTERNAL WIRING TO STN HQ, STN UNITS, E/M INSTALLATIONS, E/M STORES AND MES STAFF QTRS / OFFICES AT AGE AURANGABAD UNDER GE (S) AHMEDNAGAR
2019_MES_310191_1
8671/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
AURANGABAD
Class D Cat b(i)
7 documents required · 7 mandatory
₹500
Garrison Engineer (South) Ahmednagar
₹90,000
Yes
5 Feb 2020
28 Dec 2019
3 Feb 2020
28 Dec 2019
1 Feb 2020
11 Jan 2020
28 Dec 2019 - 6 Jan 2020
Amount
Collecting unserviceable (burnt) ceiling fan/exhaust fan/wall mounted fan/table fan/padestal fan with blade of any make and size given hreunder from E/M yard or taking down from site, transporting to local workshop, opening, cutting and taking out complete copper winding, cleaning with kerosene oil /diesel/ terpentine oil and dried out, rewinding with new super enamelled copper wire of suitable size and gauge and number of turns as recommended by the respective manufactures, varnishing and heating the winding including providing paper insulation (cuff/strip type) replacing unserviceable providing paper insulation (cuff / strip type) replacing unserviceable / missing spare (bush, bearing, capacity shackle insulator, canopy, nuts, bolts, earthing, screw, upper, socket, CI block , quarter /split pin (top & bottom) , lock nut etc) fixing the stator in rotor properly aligned and resembling ensuring right DOR, speedy and noiseless running and depositing in E/M yard and hanging at site in position complete all as directed by Engr in charge. Note:- Bush, bearing, capacitor, and canopy, shackle insulator with nuts, bolts and sockets shall be measured and paid for separately as supply only but fixing is included in this items)
Ceiling fan 1200 mm sweep
Ceiling fan 1400 mm sweep
Exhaust fan 300 mm sweep
Exhaust fan 450 mm sweep
Wall mounted fan/table fan/cabin fan /Padestal fan
Air circulating wall mounted fan above 450 mm upto 600 mm sweep
Taking down from site or collecting unserviceable ceiling fan of any sweep and make from E/M yard, transporting to local wksp, cleaning external portion with washing soda for removing oily stain, opening and cleaning internal portion with kerosene oil, drying it out, oiling / greasing properly, replacing unserviceable bearing / bush / rubber bush for arm with nuts & clamp / flexible wire and reassembling ensuring speedy and noiseless run and hanging the same at site complete all as directed. Note :- Spares if required shall be measured and paid separately under respective items.
Taking down from site or collecting unserviceable exhaust fan of any sweep and make from E/M yard, transporting to local wksp, cleaning external portion with washing soda for removing oily stain, opening and cleaning internal portion with kerosene oil, drying it out, oiling / greasing properly, replacing unserviceable bearing / bush / rubber bush for arm with nuts & clamp / flexible wire and reassembling ensuring speedy and noiseless run and hanging the same at site complete all as directed. Note :- Spares if required shall be measured and paid separately under respective items.
Supply only bush suitable for ceiling fan /exhaust fan of any sweepcomplete all as specified and directed.
Supply only ball bearing (No 6201,6202,6203 or 6204) suitable for 1200 / 1400 mm sweep ceiling fan complete all as specified and directed.
Supply only ball bearing (No 6201,6202,6203 or 6204) suitable for 300 / 400/ 450 mm sweep Exhaust fan complete all as specified and directed.
Supply only ball bearing (No 6201,6202,6203 or 6204) suitable for 400 / 450 / 600 mm sweep wall mounted/cabin/table fan complete all as specified and directed.
Supply only capacitor 2.50 mfd to 3.15 mfd , 440 Volt AC, 50 Hz PCB Oil filled type complete all as directed.
Supply only capacitor 4 MFD, 440 Volt AC, 50 Hz PCB Oil filled type for exhaust fan/wall mounted fans etc of 300/450mm/600 mm sweep complete all as directed.
Supply only canopy for ceiling fan (to and bottom) any size & make complete all as directed.
Supply only MS fan clamps with rubber real including nuts and bolts, split pin suitable for ceiling fan 1200 / 1400 mm sweep complete all as directed.
Supply only ceiling Fan blade set of 3 piece of mild steel sheet suitable for 1200 mm sweep matching with the existing colour brown / white etc. complete fixed in repairs all as directed by Engr-in-Charge.
Supply only Fan blade set of 3 piece mild steel sheet suitable for 1400 mm sweep matching with the existing colour brown / white etc. complete fixed in repairs all as directed by Engr-in-Charge.
Supply only PVC flexible wire 23/0.0076 twin twisted copper conductor including taking out the old unserviceable PVC flexible wire complete all as specified all as specified and directed by Engineer in Charge.
Spray painting to ceiling fans (in situ) of any type , size and make of with super enamelled heat resistant synthetic white paint duly filling the cavities with filler and re-writing the MES number in black paint in appropriate size and shape including preparation of surfaces complete all as directed by Engr-in-charge.
Spray painting to exhaust fans (in situ) of any type , size and make of with super enamelled heat resistant synthetic white paint duly filling the cavities with filler and re-writing the MES number in black paint in appropriate size and shape including preparation of surfaces complete all as directed by Engr-in-charge.
Spray painting to wall mounted fans/air circulating fans, padestal afns etc (in situ) of any type , size and make of with super enamelled heat resistant synthetic white paint duly filling the cavities with filler and re-writing the MES number in black paint in appropriate size and shape including preparation of surfaces complete all as directed by Engr-in-charge.
Taking down copper/aluminium point wiring (light,fan,socket or power)complete including fixture and fittings such as switches, ceiling roses, pendants , regulators,sockets,light fittings etc,removing materials to store and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer-in-charge.
Concealed point wiring with 1.5 Sq.mm (nominal area) PVC insulated and PVC unsheathed FRLS cable, multi stranded 1100 volts grade copper conductor in and including PVC casing caping 32 mm with its all accessories including one run of PVC insulated unsheathed cable FRLS of size 1.5 Sqmm copper conductor multi stranded as earth wire connected to common earth dolly including PVC boxes for mounting accessories complete all as specified and directed. Note: switch , socket,cover plate, fan regulator etc.shall be measured and paid for separately. Make of cable: Plaza/Havells/Polycab.
One light/fan point controlled by one switch.
One 3 pin 5 amps socket point on independent board
One 3 pin 5 amps socket point on same board with other switches
One light/fan point controlled by two, two way switches.
One bell/buzzer point controlled by bell push
All as per item No 19 here-in-before but with 4 sqmm size PVC insulated copper conductor cable as main wire and 2.5 sqmm cable as earth wire for power points.
Switch piano, flush type , single pole , one way 5 Amps complete all as specified and directed. .Make:Plaza/Fine/Anchor
Switch piano, flush type , single pole , one way 15 Amps complete all as specified and directed. Make:Plaza/Fine/Ancho
Switch piano, flush type , single pole , two way 5 Amps complete all as specified and directed. Make:Plaza/Fine/Anchor
Switch piano, flush type, single pole, one way Bell push 5 Amps complete all as specified and directed. Make:Plaza/Fine/Anchor
Socket outlet, 2 in 1, 5 pin, 5 Amps flush type complete all as specified and directed. Make:Plaza/Fine/Anchor
Socket outlet, 2 in 1, 5 pin, 5 and 15 Amps flush type complete all as specified and directed. Make:Plaza/Fine/Anchor
Bell AC, 230 Volts Single Phase ding dong, multi music type complete all specified and directed Make : Plaza/Finolex/Anchor
Stepped type electronic fan regulator flush type humming free as required complete all as specified and directed.Make:Plaza/Fine/Anchor
Ceiling rose, polycarbonate , isolated body surface type Bakelite 65 x 50 mm three terminal complete all as specified and directed. Make:Plaza/Fine/Anchor
PVC batten/angle holder including 18 W LED lamp fixed in repairs complete all as directed. Make Haveels/ Phillips/Bajaj
PVC side holder ifor tube light fitting fixed in repairs complete all as directed. Make Haveels/ Phillips/Bajaj
Sub main wiring with two single core of 4 Sqmm and one single core of 2.5 sqmm as earth wire with multi stranded copper conductor cable PVC (FR) insulated unsheathed cable 1100 volts grade drawn through casing/caping of size 32/25 mm including accessories as in repairs complete including making good the disturbed surface to match the existing surface complete all as specified and directed. Make: Plaza/Havells/Polycab.
Sub main wiring with two single core of 6 Sqmm and one single core of 4 sqmm as earth wire with multi stranded copper conductor cable PVC (FR) insulated unsheathed cable 1100 volts grade drawn through casing/caping of size 32/25 mm including accessories as in repairs complete including making good the disturbed surface to match the existing surface complete all as specified and directed. Make: Plaza/Havells/Polycab.
Sub main wiring with two single core of 10 Sqmm and one single core of 6 sqmm as earth wire with multi stranded copper conductor cable PVC (FR) insulated unsheathed cable 1100 volts grade drawn through casing/caping of size 32/25 mm including accessories as in repairs complete including making good the disturbed surface to match the existing surface complete all as specified and directed. Make: Plaza/Havells/Polycab.
PVC casing/caping of size 20/25 mm fixed in repairs complete all as directed.
Fluorescent tube light fitting single tube mounting, box type complete with polyester / electronic ballast, spring loaded rotar type lamp holders, starter, connector block etc. with 1x36/40 Watt fitting including tube rod fixed in repairs complete all as directed. Make:Crompton/Havells/Bajaj/Wipro
Ultra slim edelit LED down lighter 28 Watt, 220 V AC white, powder coated aluminium housing, recess/surface mounting type inclung connections fixed in repairs complete all as directed. Make: Phillips/Havells/Bajaj
LED tube light fitting single tube 1x18 W LED, 230 V four feet energy efficient direct surface mounted decorative with aluminium extrusion with PC diffuser including connecting up with twin core PVC insulated copper conductor cable of suitable size fixed in repairs complete all as directed. Make Surya cat part No, G Line or equivalent in Havells/Phillips/Bajaj
Bathroom mirror light fitting suitable for and including 15 W LED light white, powder coated CRCA sheet housing with opal aclyric diffuser and decorative end plate including connections, fixed in repairs complete all as directed.Make Philips/Havells/Bajaj
Load Line TPN vertical distribution board 4 way double door dust protected powder coated inclusive of bushbar neutral link blanking and comprising of following incoming (i) MCCB TP 100 Amps 16 KA - 01 Nos, Legran , (DX3) /SCHNEDIER - (ACTI-9) Siemens-Betagard (10 KA) Havells
Sheet metal enclosure (DB) double door triple pole and neutral 12 way, 415 Volt with 200 Amps rated bus bar complete all as specified and directed..Make :Legrand,(DX3)/SCHNEIDER-(ACTI 9) / Siemens-Betagard(10KA)
Sheet metal enclosure (DB) double door single pole and neutral 8 way,240 Volt with 200 Amps rated bus bar complete all as specified and directed..Make :Legrand,(DX3)/SCHNEIDER-(ACTI 9) / Siemens-Betagard(10KA)
Sheet metal enclosure (DB)double door Single Pole and neutral 6way, 240 Volt with 200 Amps rated bus bar complete all as specified and directed..Make :Legrand, (DX3)/SCHNEIDER-(ACTI 9)/Siemens-Betagard(10KA)
Single pole and neutral enclosure with a two pin socket complete with one single pole MCB 20 Amp complete all as specified and directed. Make :Legrand,(DX3)/SCHNEIDER-(ACTI 9)/Siemens-Betagard(10KA)
Single pole and neutral enclosure with a two pin socket complete with one single pole MCB 10 Amp complete all as specified and directed. Make :Legrand,(DX3)/SCHNEIDER-(ACTI 9)/Siemens-Betagard(10KA)
MCB SP 6-40 Amps complete all as specified and directed. Make Legrand/Havells/Schneider
MCB SPN 40 Amps complete all as specified and directed. Legrand,(DX3)/SCHNEIDER-(ACTI 9)/Siemens-Betagard(10KA)
MCB SPN 63 Amps fixed complete all as specified and directed.Make :Legrand,(DX3) / SCHNEIDER-(ACTI 9) / Siemens-Betagard (10KA).
MCB isolator TPN 63 Amps fixed complete all as specified and directed.Make :Legrand,(DX3) / SCHNEIDER-(ACTI 9) / Siemens-Betagard (10KA).
Earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (2009) including dismantaling of existing unserviceable earth pit all as specified and directed by Engr-in-Charge.
Electronics ballast compact size suitable for 28 watts for tube light fitting fixed in repairs complete all as specified and directed. Make:Crompton/Havells/Bajaj/Wipro
Electronics ballast compact size suitable for 18 watts for LED surface mounted fitting fixed in repairs complete all as specified and directed. Make:Crompton/Havells/Bajaj/Wipro
Electronics ballast compact size suitable for 36/40 watts for tube light fitting fixed in repairs complete all as specified and directed. Make:Crompton/Havells/Bajaj/Wipro
Flourescent tube rod suitable for 36/40 watt tube light fitting fixed in repairs complete all as directed. Make:Crompton/Havells/Bajaj/Wipro
Metallic 3 pin top plug, 5 Amps fixed in repairs complete all as directed. Make Havells/Fine/cona
Metallic 3 pin top plug, 15 Amps fixed in repairs complete all as directed. Make Havells/Fine/cona
Three core copper conductor cable flexible of size 2.5 sqmm complete all as directed. Make Havells/Polycab/Plaza
Three core copper conductor cable flexible of size 4 sqmm complete all as directed. Make Havells/Polycab/Plaza
PVC flexible copper conductor wire of size 1.5 sqmm complete all as directed.
Electronic energy meter, temper proof, digital LED display, single phase 220 V suitable for 0-60 current rating capacity with FRP box including locking arranement fixed in repairs complete all as directed. Make: HPL/Havells/L&T
Electronic energy meter, temper proof, digital LED display, single phase 220 V suitable for 0-100 current rating capacity with suitable range CTs and FRP box including locking arranement fixed in repairs complete all as directed. Make: HPL/Havells/L&T
RCBOs 40 A for earth leakage, overload and short circuit protection double pole 100mA fixed in repairs complete all as directed. Make ; Legrand/ABB/L&T/Schnieder
Wall mounted fan 450 mm sweep with all accessories including cixing and connecting up complete fixed in repairs all as directed. Make:Havells/Bajaj/Orient
Disconnecting water and electric connections and taking down electric water heater (geysers) of any capacity from its mounting place, transporting to workshop (if required) for repairs, re-assembling and refixing the same after repairs , connecting water and electric connections including testing complete all as specified and as directed by Engineer-in-charge.
Heating element triangular or square type of rating 1.5 KW, 230 volts ISI marked,including rubber washer fixed in repairs complete all as specified and as directed by Engineer-in-charge. Make Dasspass/Theeta or equivalent.
Heating element triangular or square type of rating 2 KW, 230 volts ISI marked,including rubber washer fixed in repairs complete all as specified and as directed by Engineer-in-charge. Make Dasspass/Theeta or equivalent.
Heating element triangular or square headed with in built thermocut switch/ thermostattype of rating 1.5/ 2 KW, 230 volts ISI marked, fixed in repairs complete all as specified and as directed by Engineer-in-charge. Make Dasspass/Theeta or equivalent.
Thermostat auto cut with thermal setting upto 80 degree centigrade, 230 V, for the geysers 25/35 Ltrs capacity as per site requirement fixed in repairs complete all as specified and as directed by Engr-in-Charge . Make DASS PASS/THETA/Bajaj/Vvinus
Copper inner tank/vessel heavy duty fixed in replacement of suitable to the existing 25 litres capacity geysers any make complete all as specified and as directed by Engr-in-Charge .Make: Havells/Bajaj or any existing make
Copper inner tank/vessel heavy duty fixed in replacement of suitable to the existing 50 litres capacity geysers any make complete all as specified and as directed by Engr-in-Charge .Make: Havells/Bajaj or any existing make
Syphon assembly suitable for 25 litre capacity geyser any make, fixed in repairs complete all as directed
Syphon assembly suitable for 25 litre capacity geyser any make, fixed in repairs complete all as directed
Apparatus plate (Geysers assembly) suitable for existing Geysers of Cap 25 Litres of copper /brass complete with nuts and bolts and rubber washers fixed in repairs complete all as specified and directed
Apparatus plate (Geysers assembly) suitable for existing Geysers of Cap 50 Litres of copper /brass complete with nuts and bolts and rubber washers fixed in repairs complete all as specified and directed
Non return valve 15mm bore,as per site requirement fixed in repairscomplete all as specified and as directed by Engr-in-Charge . ISI marked.
Safety valve/high pressure valve 15mm bore,as per site requirement fixed in repairs complete all as specified and as directed by Engr-in-Charge . ISI marked.
Insulating material i. e. glass wool fixed in 25/50 ltr capacity geyser. complete, all as specified and as directed by Engr-in-Charge.
Indicator lamp red/green fixed in repairs complete all as diercted.
Drain plug of suitable size for25/50 ltr capacity geyser complete all as directed.
Ball brass valve 15 mm bore fixed in repairs complete all as directed
Heat resistant heavy duty pressure grade 6 kg/sq cm ,braided PVC connecting pipe with brass adapters 450 mm long suitable for 15 mm dia pipe and fixed in position as in repairs complete all as approved by Engineer-in-charge. Make :Havells/Prayg.
Taking out old thermostat / heating element and refixing the same after descaling/cleaning and making electric connection and calibrating/adjusting to a temperature rating as per manufacturer recommendations complete all as directed. Notes for ser item No. 1 to 81 - Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.
M/s. Gurudatt Electricals And Engineers, Aurangabad
KAMINS CARE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .