Repairs restoration works and renovation to NFSS Lab in Mechanical Engineering Department

Amount

Dismantling of existing structures like culverts, bridges and retaining walls and other structures compraising of masonry, cement concrete, wood work, steel work including T & P and scaffolding wherever necessary, sorting the dismantled materials, disposal of unserviceable materials, stacking the serviceable materials with all lifts and lead of 1000 metres complete as per specifications --do-- Dismantling brick work In cement mortar

Dismantling of existing structures like culverts, bridges and retaining walls and other structures compraising of masonry, cement concrete, wood work, steel work including T & P and scaffolding wherever necessary, sorting the dismantled materials, disposal of unserviceable materials, stacking the serviceable materials with all lifts and lead of 1000 metres complete as per specifications cement concrete i. By manual means : b. Cement concrete M15 & M20

Removing and relaying heavy duty cobble stones 60 mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a miniumum compressive strength of 281 kg per sqm over 50 mm thick sand bed (average thickness) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level including cost of materials, labour and HOM of machineries complete as per specifications.

Dismantling of existing structures like R.C.C Cement concrete grade M20 & above and other structures compraising of masonry, cement concrete, wood work, steel work including T & P and scaffolding wherever necessary, sorting the dismantled materials, disposal of unserviceable materials, stacking the serviceable materials with all lifts and lead of 1000 metres complete as per specifications

Dismantling mangalore tiles roof and stacking the material within a radius of 50 m. _do_ A.C sheet roofing.

Dismantling of Steel work in all types of sections upto a height of 5m above plinth level excluding cutting of rivet. a. Including dismembering.

Dismantling plastering and removing the debris with a lead upto 200m.

Dismantling the tile work in floor and roof laid in cement or surki mortar including stacking the materials with in 50 m lead of tiles thickness 10 mm to 25 mm.

Dismantling of existing structures like Dismantling stone masonry b. Rubble masonry in cement mortar and retaining walls and other structures compraising of masonry, cement concrete, wood work, steel work including T & P and scaffolding wherever necessary, sorting the dismantled materials, disposal of unserviceable materials, stacking the serviceable materials with all lifts and lead of 1000 metres complete as per specifications

Earthwork excavation for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications.

Refilling available earth around pipe lines, cables in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m. and lift upto 1.5 m. including cost of all labour complete as per specifications allow 60% of rate considered under item

Providing and laying in position plain cement concrete of mix M 7.5 with opc cement @180kgs with 40mm and down size graded granite metal coarse aggregates @0.85 cum and fine aggegates @ 0.57 cum machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.

Providing and laying in position Reinforced cement concrete of design mix M20 with opc cement @320kgs with 20mm and down size graded granite metal coarse aggregates @0.878 cum and fine aggegates @ 0.459 cum with super plastisiser @3lts confirming to IS 9103-1999 reaffirmed -2008, machine mixed, concrete laid in layers not exceeding 15 cms. thick,vibrated for all works in foundation and plinth,and ground floor level forroof slabs ,stair case,lintles,retaining walls return walls,walls (any thick ness) including attached plasters ,coloums,piers,abutments,pillers,posts,struts,buttresses,string or lacingcourses,parapets,coping,bed blocks anchor bolts,plainwindow cills,fillets,etc including cost of all materials, labour, HOM of machinery, curing complete as per specifications.

Providing and laying in position Reinforced cement concrete of design mix M20 with opc cement @220kgs with 20mm and down size graded granite metal coarse aggregates @0.792 cum and fine aggegates @ 0.465 cum with super plastisiser @3lts confirming to IS 9103-1999 reaffirmed -2008, machine mixed, concrete laid in layers not exceeding 15 cms. thick,vibrated for all works in foundation and plinth,and ground floor level for roof slabs ,stair case,lintles,retaining walls return walls,walls (any thick ness) including attached plasters ,coloums,piers,abutments,pillers,posts,struts,buttresses,string or lacingcourses,parapets,coping,bed blocks anchor bolts,plainwindow cills,fillets,etc including cost of all materials, labour, HOM of machinery, curing complete as per specifications.

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness upto 200 mm including cost of all materials, labour complete as per specificaitons. do for 0.5 mtrs

Providing TMT steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. -do- TMT Bars Fe 500

Providing and constructing burnt brick masonry with approved quality of non-modular bricks of standard size of class designation 50 (table moulded) with cement mortar 1:6 for basement and superstructure including cost of materials, labour charges, scaffolding, curing complete as per specifications.

Providing and constructing granite / trap / basalt size stone masonry in foundation cement mortar 1:6, stone hammerd dressed in courses not less than 20 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications.

Providing and laying in position plain cement concrete of mix M 15 with cement @240kgs with 20mm and down size graded granite metal coarse aggregates @0.878 cum and fine aggegates @ 0.459cum , machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.

Charges towards removing and refixing of Existing M.S.Windows & Ventilators along with pigeon cage as per the instructions of user department and guidelines of Engineer -In-charge.

Providing and constructing non load bearing wall with Light Weight Concrete (AutoClaved aerated Concrete)Blocks Confirming to IS:2185(Part-3) 1984 and IS 6441-1972 of Compressive strenght of 3.0N/Sq MM with a thin layer of Polymer Based jointing solvent for super structure with necessary scaffolding,curing including cost of all materials,Labour,lead & Lift etc,Complete as per Specifications. -do- with 600x200x200mm size Blocks.

Providing and fixing in position anodized aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m; sides and top sections 1.3 mm, thick, weight 0.933 kg/m.shutter frame section comprising top and bottom section of size 40mmx18mm, wall thickness 1.25mm. weight 0.417 kg./m. shutter side outer 40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock section 40mmx26.7mm wall thickness 1.1 mm. thick, weight 0.469 kg/m, the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading all aluminium sections anodised 12 to 15 microns thick including cutting to required length, joints mitred subdividing the frame tenonned and rivetted, in the assembled frame, stiffened with end clips for corners, angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be, with necessary steel screws, raul plugs or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar, do using aluminium sectio powered coated to aminimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality

Providing, fabricating, assembling and fixing in position anodized aluminium doors using following aluminium mat finish or glossy finish, outer frame plain section 101.6x44.45mm thickness 3.18mm, section weight 2.404 kg/m, door shutters vertical section 44.62x44.45mm thickness 3.18mm, section weight 1.505kg/m, top section 47.62x44.45mm thickness 3.00mm, section weight 1.426kg/m bottom section 114.3x44.45 thickness 3.18mm, section weight 2.646kg/m, door central section 49.91x44.45mm thickness 3.00mm, section weight 1.495 kg/m glazing clips 19x17.3x11mm thickness 0.9mm section weight 0.124kg/m; aluminium sections anodized 12 to 15 microns cut to length joint metred corners grinded, the shutters pivoted opening arrangement with heavy duty aluminium alloy automatic door closures floor mounted, providing and fixing standard approved accessories, such as aluminium handle for full width or length, tower bolts, lock, pivots: P.V.C. or rubber gasket with 5.5m. thick plain glass for top and bottom panel; aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherance of mortars or any other sticky materials; the assembled frame fitted with the corner angles, strips and fitted with screws, rawl plugs or teakwood gutties to R.C.C. columns or masonry on sides. beams and flooring in bottom. including cutting, chistling and making good with cement mortar to match the surface; all the frames throughly cleaned free from rust, scale, or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. do using aluminium sectio powered coated to aminimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality

Providing and fixing M.S.grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications.

Providing and laying vitrified glazed tiles of approved make, quality & colour of size 600 x 600 x 10 mm thick fixed on bed of 12 thick cement mortar for flooring, skirting and jointed with neat cement slurry mixed with pigmentto match shade of tiles, including providing spacers at required interval and removing stains etc., complete as per specifications.

Providing Ceramic tiles of approved make,shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1:3 mix, flush pointing with white cement using colour pigment , including cost of materials, labour, curing, complete as per specifications. _do_ for Ceramic Tiles of size 30x30cms

Providing skirting, dado, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface (excluding cost of rough plastered surface which should be measured and paid separately ) using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. colour glazed tiles 30x45cms 6mm thick with border of size 30x10cm

Providing and laying M-15 cement concrete flooring, 50 mm thick with metallic concrete hardner toping, under layer of 35mm thick m-15 cement concrete using broken granite metal of 20mm and down size, and top layer 50mm thick of metallic cement hardner consisting of mix 1:2 ( 1 cement hardner mix : 2 granite metal 10mm nominal size ) by volume, with which metallic hardening compound of approved quality mix in the ratio of 4:1 (4 part of cement and 1 part of metallic floor hardening compound of approved quality by wt), including finishing cost of materials, labour, curing, complete as per specifications.

Providing water proofer capable of bridging cracks upto 2 mm in the exposed roof surface using spray applied liquid water proofer at the rate of 0.20 ltr/Sqm, primer and chemical mortar shall be applied before applying this spray liquid water proofer ,the area shall be cleaned by high pressure water jet/ wire bush or mechanical means to make it free from loose particles, dust ,dirt etc _do_ for crack filling

Providing and fixing plaster mesh 200mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment )

Providing and Laying reinforced cement concrete pipe NP2 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete as per specifications. 300mm dia.

Providing 20mm thick cement plaster in single coat with cement mortar 1:3, to stone masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications (Including Lime Rendering).

Providing 18mm thick cement plaster in single coat with cement mortar 1:6 to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications

Providing rough cement plastering 15mm thick in single coat with cement mortar 1:4, to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications

Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification.

Providing and applying two coats with oil bound washabledistemper of approved brand and shade on wall surface including priming coat with distemper primer after throughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. (For Ceiling )

Providing and applying two coats with oil bound washabledistemper of approved brand and shade on wall surface including priming coat with distemper primer after throughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications.

Providing & finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered materials, free from mortar drops and other foreign matter cost of materials, labour complete and as per specifications.

Providing and applying enamel metal paint two coats (including priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter,including cost of materials, labour, complete as per specifications

Cost of hauling of materials by tipper excluding cost of loading and unloading and stacking complete as per specification

Providing and fixing Chorinated polyvinyl cloride ( CPVC) Pipes conforming to IS 15778 having thermal stebilty for hot & cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00m spacing this includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete ( internal work exposed on wall) 32mm nominal OD pipes

Providing and fixing Chorinated polyvinyl cloride ( CPVC) Pipes conforming to IS 15778 having thermal stebilty for hot & cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00m spacing this includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chasis and making good the same including testing of joints complete ( Concealed work including cutting chasis and good the walls etc) 20mm nominal OD pipes

Providing and fixing Chorinated polyvinyl cloride ( CPVC) Pipes conforming to IS 15778 having thermal stebilty for hot & cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00m spacing this includes jointing of pipes and fittings with one step CPVC solvent cement trenching refilling and testing of joints complete ( external works) 25mm nominal OD pipes

Providing and fixing Chorinated polyvinyl cloride ( CPVC) Pipes conforming to IS 15778 having thermal stebilty for hot & cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00m spacing this includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete ( internal work exposed on wall) 40mm nominal OD pipes

Providing and fixing Chorinated polyvinyl cloride ( CPVC) Pipes conforming to IS 15778 having thermal stebilty for hot & cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00m spacing this includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete ( internal work exposed on wall) 50mm nominal OD pipes

Providing and fixing gun metal wheel valve conforming to IS specification of approved make as per directions includng all lead and lift etc., complete. 32 mm dia

Providing and fixing gun metal wheel valve conforming to IS specification of approved make as per directions includng all lead and lift etc., complete. 40 mm dia

Providing and fixing gun metal wheel valve conforming to IS specification of approved make as per directions includng all lead and lift etc., complete. 50 mm dia

Providing and fixing in position 32mm nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications.

Providing and fixing in position 40mm nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications.

Providing and fixing in position 50mm nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications.

Fabricating supply and erecting M.S angular Truss of span upto 10m. The bottom and topmember is provided with 50x50x6mm double equal angles, welded back to back and inbetween top and bottom line in areas of mid section is provided with 50x50x6mm equal single angle for vertical and inclined members and supporting ends 40x40x5mm single angle is approved. All the members are welded together with 6mm gusset plate asper Drawing no CBS/SD/K-mantap/9/MND/97. The entire truss is anchored in RCC coloum by uing 4nos of M.S angle bolts at each support, with 10mm thick base and shoe plate .The work includes cutting,straightening,placing in portion of M.S angle and welding whatever necessary and applying one coat of red oxide primer coat to all the members ,including cost of materials,labourcharges and hire charges of machineries for cutting,welding,griding and erection equipements with all lead and lift,transportationetc, complete asper specification

Supply and fixing of 12mm dia -150mm long anchor bolts of approved make and quality along with drilling of holes in wall as well as in MS plates of (10mm thick) etc.

Providing and fixing to wall, ceiling and floor, low density polyethylene pipes 6.00 kgf/sq.cm working pressure 160 mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications.

Removing wall panelling / false ceiling / wooden partition / aluminium partition, stacking it with all cost and conveyance labour for all items of work, HOM of equipment etc., complete as per specification.

Providing polishing to existing Mosaic tiles flooring & skirting in three coats with suitable grinding stones using floor polishing machine and filling the gaps of tiles with grey cement mixed wih white Cement and should be cured for 3days then final coat of Polishing be done and finally wax mixed with petrol of coconut oil should be applied on tiles & Polishing with machine & Coir .

Providing & Fixing wooden partition with 50X50mm Sal wood frame work @600mm C/C in both ways, Providing & Fixing 6mm Ply wood of approved make and quality to patition frame work on both sides and providing and fixing 1mm thick decorative Laminate for (Existing Shade) Partition on both sides along with necessary accessories & Fixtures.

Charges towards Removing and refixing of doors shutters along with frame including cost of hold fasts etc.

Charges towards Removing of existing M.S Rolling Shutters Safely with damaging the cover, Guide rail and laths etc Complete.

Charges towards removing, Altering to required size and refixing of existing rolling shutter along with necessary accessories and fixtures and providing and fixing motor for rolling shutter for easy mechanised operation.

Providing and fixing white vitreous china clay, water closet European type ( Pedestal type ) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre low level, P.V.C flushing cistern ( all are approved make) with fittings, C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications.

Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S or P trap, 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 32mm diameter flush pipe fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications.

Providing and fixing white vitreous china clay, flat back wash basin size 550x400mm with a single 15mm C.P brass pillar tap with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications.

Providing and fixing 600x450mm bevelLead edge mirror of superior glass with 6mm hard board backing and fixed to wooden cleats with C.P screws, washers, including cost of materials, labour complete as per specifications

Providing and fixing C.P. brass towel rail 600 mm length, 20mm dia with C.P brackets, fixed to wooden cleats with C.P. brass screws including cost of materials, labour complete as per specifications.

Supply and fixing white vitreous china clay large urinals of Hindware/Parryware make of size 580X380X350mm along with all necessary accessorries and fixtures.

Providing and fixing jaguar make angle cocks along with C.P flagage and other necessary accessories as per the instructions of Engineer-In-Charge

Providing and fixing jaguar make 2in1 bibcocks along with c.p flagageand other necessary accessories as per the instructions of Engineer-In-Charge

Providing and fixing jaguar make long body bibcock along with c.p flagage and other necessary accessories as per the instructions of Engineer-In-Charge

Providing and fixing jaguar make Pillar cock for hand wash basin along with c.p flagageand other necessary accessories as per the instructions of Engineer-In-Charge

Providing and fixing Jaguar make Health Faucet along with the flexible c.p pipe of 600mm long body and other necessary accessories as per the instructions of Engineer-In-Charge

Providing and fixing jaguar make urinal spreader,push cock, c.p waste coupling and waste pipe along with necessary accessories as per the instructions of Engineer-In-Charge

Providing and installing of pre painted galvolume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm+/- 0.02 mm tolerance zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the seet and polyester top coat 20-22 microns using self drilling/self tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses.

Providing and fabricated MS cover with doors for Electrical panel board using suitable MS sections for frame work along with bracing and providing and fixing 25X25X10G weld mesh for top panel and 3mm thick MS sheet for bottom panel including a coat of non corrosive red-lead Primer along with necessary accessories and fixtures.

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness upto 200 mm including cost of all materials, labour complete as per specificaitons. do for 0 .6 mtrs

Providing 20mm thick cement plaster in single coat with cement mortar 1:4, to stone masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.

Providing flush pointing to square rubble, course or uncoursed stone masonry with cement mortar 1:3, 20 mm deep, after raking joints to depth of 20 mm nicely lining, including cost of materials, labour, curing complete as per specifications.

Cost of hauling of materials by tipper excluding cost of loading and unloading and stacking complete as per speciofication

LED FITTINGS Supplying of LED Floodlight with .......W System Power consumption pressure die cast aluminum housing with powder coating with IP 65 protection. 1, 200-275V voltage with electronic Driver, PF>0.9, should meet ANSI 2G Vibration test, Compliance to UL/CE with Class I. System rating shall be 50K hrs. @ Lumen maintenance of 70%, system efficacy > 80lm/w. Over load & Short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>130lm/w at 1W & Fixture Efficiency >80lm/w with nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 5 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer.LED Floodlight 100

Supplying of ......feet - PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fighting 1 x4'- 20/22 w

Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI> 70%. efficacy >80 lumen per watt, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF > 0.95, power loss should < 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 9W, 6500K

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. ( Icu = Ics) FOUR POLE100Amps 25kA.

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. ( Icu = Ics) FOUR POLE125-160Amps 25kA.

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. ( Icu = Ics) FOUR POLE200Amps 35kA.

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. ( Icu = Ics) FOUR POLE250Amps 35kA.

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. ( Icu = Ics) FOUR POLE320-400Amps 50kA.

Supplying and fixing regular MCCB distribution Panel confirming to IS 8828, on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440Volts 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCCB/MCB's as outgoings confirming to IS8828.4Way

Supplying and fixing regular MCCB distribution Panel confirming to IS 8828, on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440Volts 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCCB/MCB's as outgoings confirming to IS8828.8Way

Supplying and fixing regular MCCB distribution Panel confirming to IS 8828, on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440Volts 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCCB/MCB's as outgoings confirming to IS8828.12Way

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.5-32Amps SP

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.5-32 Amps DP

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.40-63Amps TPN

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. 400Amps

Electrical Pannel Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete.16SWG

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.100Amps 4x30x6mm Aluminum Strips

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.250Amps 4x30x10mm Aluminum Strips

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.400Amps 4x50x10mm Aluminum Strips

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50x50x6mm

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy.

Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C.

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)32mm dia

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)45mm dia

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)50mm dia

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)63mm dia

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)75mm dia

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)100mm dia

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.50 sqmm Long Barrel

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes70 sqmm Long Barrel

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes95 sqmm Long Barrel

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes120 sqmm Long Barrel

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes150 sqmm Long Barrel

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes185 sqmm Long Barrel

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes240 sqmm Long Barrel

EarthingSupplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.Copper wire. 8 SWG

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.Copper wire.600x600x3mm plate

Under Ground CblesSupplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strip (except 2CX10Sq.mm wire armoured) confirming to IS-3975:1990 (No. of Strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP-A.3.5 core 25 sqmm

Under Ground CblesSupplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strip (except 2CX10Sq.mm wire armoured) confirming to IS-3975:1990 (No. of Strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP-A.3.5 core 35 sqmm

Under Ground CblesSupplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strip (except 2CX10Sq.mm wire armoured) confirming to IS-3975:1990 (No. of Strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP-A.3.5 core 50 sqmm

Under Ground CblesSupplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strip (except 2CX10Sq.mm wire armoured) confirming to IS-3975:1990 (No. of Strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP-A.3.5 core 95 sqmm

Under Ground CblesSupplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strip (except 2CX10Sq.mm wire armoured) confirming to IS-3975:1990 (No. of Strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP-A.3.5 core 120 sqmm

Under Ground CblesSupplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strip (except 2CX10Sq.mm wire armoured) confirming to IS-3975:1990 (No. of Strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP-A.3.5 core 185 sqmm

Under Ground CblesSupplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strip (except 2CX10Sq.mm wire armoured) confirming to IS-3975:1990 (No. of Strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP-A.3.5 core 240 sqmm

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.In existing trench/duct.25 sqmm to 75 sqmm

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.In existing trench/duct95 sqmm to150Sqmm

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.In existing trench/duct185sqmm to 240Sqmm

Supplying and making straight through cable joint with epoxy resin including ferrules and other jointing materials for PVC insulated and PVC sheathed steel tape, wire armoured aluminum conductor cable of 1.1 KV grade of the following sizes.3 ½ x35 sqmm

Supplying and making straight through cable joint with epoxy resin including ferrules and other jointing materials for PVC insulated and PVC sheathed steel tape, wire armoured aluminum conductor cable of 1.1 KV grade of the following sizes3 ½ x50 sqmm

Supplying and making straight through cable joint with epoxy resin including ferrules and other jointing materials for PVC insulated and PVC sheathed steel tape, wire armoured aluminum conductor cable of 1.1 KV grade of the following sizes3 ½ x70/95 sqmm

Supplying and making straight through cable joint with epoxy resin including ferrules and other jointing materials for PVC insulated and PVC sheathed steel tape, wire armoured aluminum conductor cable of 1.1 KV grade of the following sizes3 ½ x120 /150 sqmm

Supplying and making straight through cable joint with epoxy resin including ferrules and other jointing materials for PVC insulated and PVC sheathed steel tape, wire armoured aluminum conductor cable of 1.1 KV grade of the following sizes3 ½ x185/225 sqmm

Supplying and making straight through cable joint with epoxy resin including ferrules and other jointing materials for PVC insulated and PVC sheathed steel tape, wire armoured aluminum conductor cable of 1.1 KV grade of the following sizes3 ½ x240 sqmm

Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.300x50mm

Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.450x50mm

Internal Wiring & Accessories Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A.2.5 sqmm

Internal Wiring & Accessories Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A.4 sqmm

Internal Wiring & Accessories Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A.6 sqmm

Internal Wiring & Accessories Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A.10 sqmm

Internal Wiring & Accessories Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A.16 sqmm

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.48" Sweep (1200mm)Regular model

Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300mm)

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire.

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall / ceiling / Rafter / Girders

Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.19/20mm dia 2mm thick

Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws 25mm dia 2mm thick

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.75x75x65mm

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.100x75x65mm

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.135x75x65mm

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.180x90x65mm

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.200x90x65mm

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.135x160x65mm

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.200x200x65mm

Supplying and fixing PVC/metal conduit Deep junction box 19/20mm deep junction box

Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50mm conduit in brick wall

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm …. etc. as required.20mm

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm …. etc. as required.25mm

Supplying And Fixing "S" Hook made out of 14mm dia M.S.Rod.

Supplying And Fixing M.S. Rafter Clamp Set made out of M.S. Flat & 14mm M.S. rod.

Supplying And Fixing Metal Fan Box with Round Hook.

Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.GROUP A Short point upto 3Mtr from tapping point to out let via switch

Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.GROUP AMedium point above 3Mtr upto 6Mtr from tapping point to out let via switch

Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.GROUP ALong point above 6Mtr upto 10Mtr from tapping point to out let via switch

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall4-5Way

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall8Way

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall10-12Way

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.4 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.8 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.l2 module

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293GROUP A 6Amps one way.

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293GROUP A 6Amps Two way.

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293GROUP A 6Amps 3way socket

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293GROUP A Stepped Fan Regulator.

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293GROUP A 16Amps one way switch

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293GROUP A 32Amps DP switch

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293GROUP A 6/16Amps universal socket

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293GROUP A Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293GROUP A TV/Telephone socket

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293GROUP A RJ45/ I.O. outlet

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. Supplying and fixing of metal clad industrial plugs and sockets.PLUG3pole+earth 440V

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. Supplying and fixing of metal clad industrial plugs and sockets.PLUG3pole+earth 440V 20 Amps

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. Supplying and fixing of metal clad industrial plugs and sockets.PLUG3pole+earth 440V 30 Amps

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. Supplying and fixing of metal clad industrial plugs and SOCKET3pole+earth 440V 20 Amps

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. Supplying and fixing of metal clad industrial plugs and 30 Amps

NETWORKING & TELECOMUNICATIONSupplying and drawing UTP-CAT 6E LAN cable.

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable.2Pair

Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6.

Supplying & Fixing of switch mounting rack with power manager & Cable manager . 24U with 650mm depth

T M RAGHU