ADDITIONAL/ALTERATION AND SPECIAL REPAIRS TO SEWAGE LINE AT INS TANAJI AND ADDITION ALTERATION AND SPECIAL REPAIR TO FALSE CEILING IN BUILDING NO P 47 (PBGM) AND P 48 AT NAD TROMBAY AND CERTAIN MINOR WORKS AT MANKHURD AREA UNDER GE (NW) MANKHURD

Amount

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and as directed

Excavation in trenches not exceeding 1.50 metre wide and exceeding 1.50 metre N exc 3.0m depth for foundation, manhole etc not exc 10 Sqm on plan and exc 1.5 metre but not exc 3.0 mtr depth including getting out in soft/loose soil complete all as specified and as directed

Excavation in trenches not exceeding 1.50 metre wide and exceeding 3 metre N exc 4.5m depth for foundation, manhole etc not exc 10 Sqm on plan and exc 3.0 mtr depth but n.exc 4.5 mtr depth including getting out in soft/loose soil complete all as specified and as directed

Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soft/loose soil complete all as specified and as directed.

Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed

M&L reinforced concrete pipes, class NP2, 300mm bore, laid in any position and jointed complete with collars complete all as specified and as directed

M&L Plain Cement concrete 1:5:10 type E-2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L PCC block masonry with solid blocks, grade C (5.0) exc 10 cm in width and setting in cement mortar (1:6) etc complete all as specifiend and directed.

M&L Plain cement concrete 1:3:6 type C-2 using 20 mm graded stone aggregate as in surface channel, drain and manholes complete all as specified and as directed.

All as per Serial Item No 9 herein above but PCC 1:3:6Type C-1 using 20mm graded stone aggregate as in benching, coping including necessary form work weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

M&L Rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished with rough surfaces complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar (1:4) on brick/concrete surfaces of walls, finished even & smooth surfaces without using extra cement with thin layer of sagol finishcomplete all as specified.

S & F for 100 mm thick precast manhole cover rectanglular in shape of size 750 x 450mm complete all as specified and directed.

Cutting into existing manhole, 300mm bore pipe, for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregates, smooth finish and re-forming benching complete all as specified and as directed

M&L cutting existing road/hardstanding getting out excavated material for laying RCC hume pipe ; returning filling & well ramming watering finish surface 10 cm from top and 45 cm wide using PCC 1:2:4 type B-1 (20 mm graded aggregate) including removal of surplus soil complete all as specified and as directed

M&L Machine pressed precast concrete interlocking paver block Coloured any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade over and including 25 mm thick sand cushion complete all as specified and as directed

M&L 100 mm thick plain cement concrete type D2, 1:4:8 (using 40 mm graded aggregate) as in sub base of flooring complete all as specified and as directed

Demolition of brick work /stone bouldersbuilt in cement mortar including all quoins, arches, pillars but excluding ashalar facing dressed stone work & precast concrete articles etc complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, as in wall etc complete all as specified & directed.

Extra over stone walling for hammer dressing to face stones with maximum depression on fair face from straight edge held against the dressed surface not exceeding 40 mm for granite or trap stone of face beds & joints as specified of random rubble walling uncoursed or brought upto course complete all as specified and as directed

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed

M&L for suspended False ceiling with aluminimum grid work system of size 605 x 605mm with runners aluminimum anodised main Tee of section 35x35x1.5mm thick , cross T of section 25x25x1.5mm thick & Aluminimum anodised angle of size 25mm x 25mm x1.5mm thick fixed along side of wall with wooden plugs & hanging from ceiling/MS purlins with and including 6mm dia GI wire suspension system (upto 1200mm length), adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40mm x 3mm size, 60mm long and expansion hold fasteners 12.5mm dia 40mm long, including necessary scaffolding etc, complete all as specified and directed. Note: Ceiling board / tiles shall be measured and paid separately.

M&L for 4mm thick non asbestos (E-board classic designer pattern) fibre cement building boards fixed or laid/inserted to aluminium frame work as in ceiling flat or sloping with screws complete all as specified and directed

M & L for applying three coats of white wash on non asbestos sheets complete all as specified and directed

Dismantlling floor hearth or wall tilling incl removal of cement mortar bedding (but not backing) removing serviceable tiles store & rubbish off the premises complete all as specified and directed.

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 - S, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and directed.

M&L for two coats synthetic enamel paint over red oxide zinc chrome primer of any description not other wise described over 10 cm width or girth including preparation of new or previously untreated sterel surfaces complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in skirting, dado, steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over & including screed bed or bedding layer of morar 15 mm in cement mortar 1:4set and jointed in neat cement slurry and pointed in white or coloured cement to match Colour is approved by GE

S&F for aluminium body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed

Surface dressing n.exc 15cm deep and getting out in soft and loose soil complete all as specified and directed.

M&L for hard core of gauge exc 63 mm but not exc 100 mm , depositing spreading and levelling in layers n exc 15 cm thick , watered and rolled / rammed to a true surface complete all as specified and directed

Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in Soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface

M&L Plain Cement Concrete Type B2 1:2:4 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete and surrounding posts complete all as specified and directed

S & F MS steel work in tubular trusses and tubular posts and square tubes including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 or IS 4293-1979 or IS graded St 240 complete all as specified and directed.

S&F Polycarbonate Hollow sheet 10mm thick of any colour having tensile strength of 60.30MPa as in roof covering/cladding to wall, fixed with self tapping screws and including aluminium channel strip complete all as specified and as directed.

S&F aluminium anodised section (minimum thickness of anodising shall be 15 micron) for fixing polycarbonate multiwall hollow sheet with and including EPDM gasket as in roof covering / cladding, complete all as specified and directed. Note:- Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. Cost of EPDM gasket etc shall also be deemed to be included in the quoted rate.

M&L 15mm thick rendering in CM (1:6) on brick/concrete surfaces of walls, finished even & smooth surfaces without using extra cement with thin layer of sagol finish complete all as specified and directed.

M & L for preparation of new plastered surfaces of AC sheets/concrete surfaces/plastered surfaces of any description and at any position not otherwise described and applying two coats of 100% anti fungal acrylic exterior emulsion paint over one coat of primer all as per manufacturer's instructions including necessary scaffoldings etc, complete all as specified and directed. Note: The percentage of colours in Camouflaging pattern shall be as under :- Olive Green - 50%, Dark Brown - 25%, Dark Stone/Leaf Brown - 25%

M& L Pre Polished Chequred cement concrete tiles 30cm x 30 cm x 25 mm thick, set, jointed and pointed in near cement slurry in floors with mixture of grey white cement in equal proportions over screed bed or bedding layer 20 mm thick in cement mortar 1:6 complete all as specified and as directed

S&F in repairs collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and as directed.

S&F standard aluminium section powder coated (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE ) as in frame, shutters for doors, window / ventilators, fixed / openable / sliding or in any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed Note:- Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. Cost of other items / accessories required for entire completion of the work shall be deemed to be included in the quoted rate. However glass panes, shall be measured and paid separately as supply only under respective item.

Supply only sheet glass 5 mm thick ordinary quality fixing to aluminium frame door/ window shutters in any position complete all as specified and as directed.

M& L for preparing old decorated surfaces of walls & applying one coat of oil bound distemper complete all as specified

M&L PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in hold fast, bed plate etc including necessary form work complete all as specified and as directed.

M&L 20mm thick rendering in cement mortar (1:4) on brick/concrete surfaces of walls, laid in two layers, 1st layer 15mm thick and finishing layer 5mm thick mixed with integral water proofing compound @ 3 % by weight of cement content of finishing layer finished fair and even & smooth surfaces without using extra cement complete all as specified.

Supply only Integral water proofing compound

M & L for preparation of new plastered surfaces of wall etc and applying two coats of 100% anti fungal acrylic exterior emulsion paint over one coat of alkali resistance primer all as per manufacturer's instructions including necessary scaffoldings etc, complete all as specified and directed.

Demolition cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) all as specified and directed.

Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 Square Metre not exceeding 04 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

Taking down aluminium partation frame with shutters any size all as specified and directed.

Supply only 12 mm thick prelaminated particle, board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to aluminium frame work all as specified and directed.

Supply only plain sheet glass 4mm thick quality fixing to wooden /aluminium frame door/ window shutters in any position with new beads/ steel section as required for securing including dismantling of old jali and painting to match with existing complete all as specified and as directed.

S&F 100 mm long brass Mortice lock 2 levers, vertical type,complete all as specified and as directed

M & L for brick work in CM (1:6) using sub class 'B' bricks strainght or or curved as curved as required on plan exc 6 mtrs mean radius etc all as specified and directed.

M&L 40 mm thick plain cement concrete type B1, 1:2:4 (using 20 mm graded aggregate) as in subbase of flooring complete all as specified and as directed

Material and labour for 2nd class hard wood in scantlings timber fixed clean sawn embedded to ground and wall complete all as specified and directed.

S&F for 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified and as directed.

S&F Mild steel work as in band, straps, supports for RWP, clamps, hold fasts, wall ties, , hooks & pintle hinges and similar small articles conforming to Fe-290-0 or Gde E-165 all as specified and directed.

M&L for Preparing surface of wood and wood based materials, steel and iron work, new or old, treating ends of posts, coal tar black paint on back of chowkats area exc 0.10 Sqm but not exc 0.5 Sqm each complete all as specified.

M&L for treating with tar or coal tar black paint on back of chowkats, ends of posts, holdfasts etc. area not exc 0.1 Sqm each complete all as specified.

S&F 100 mm size stainless steel butt hinges medium weight fixed with stainless screw all as specified and directed.

S&F aluminum anodised barrel tower bolts of extruded section of size 150 mm length all as specified and directed.

S&F Aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified and as directed.

S&F Floor door stopper of Aluminium alloy body and tongue, overall length of cover plate 140 mm , anodized, with hard drawn steel spring , fixed to shutters complete all as specified and as directed.

M& L for preparation surfaces of new or previsouly untreated wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water , etc complete all as specified and directed.

Chipping, removing carefully loose/damaged concrete incl plastering (total thickness upto 60mm ) from RCC surfaces of columns, beams,Chajas, soffits of slabs etc by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land, even including necessary scaffolding up to 24 m height complete all as specified Notes: (i) Hard concrete shall not be removed by force. (ii) Mode of measurement: superficial area of concrete will be measured

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem or Thermax/MAPEI Construction/Fosroc as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application even including necessary scaffolding up to 24 m height complete all as specified. Notes: Mode of measurement: superficial area of concrete will be measured

M&L for cleaning existing reinforcement by sand blasting with suitable pump as directed by the GE and wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make Thermax/MAPEI Construction/Fosroc, Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hr between the coats, complete all as specified and directed. Note :- Mode of measurement: superficial area of concrete will be measured.

M&L for Anticorrosive Treatment to Reinforcement using Thermax/MAPEI Construction/ Fosroc or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces, complete all as specified and directed . Note:- Mode of measurement: superficial area of concrete will be measured.

M&L for building up the profile of structural members by using polymer modified mortar from OR Polymer mortar HB of Dr Fixit,Thermax/MAPEI Construction/Fosroc while the bonding agent is still sticking upto 20mm thickness including levelling, profiling etc complete all as specified and directed.

M& L rendering 10 mm thick in CM 1:3 on ceiling surface finished even & smooth with thin layer of sagol finish complete all as specified.

M&L for prepration of newly plaster surface of wall and applying two coat of distemper oil emulsion on walls with one coat of primer ( chalk white on plastered surfaces) complete all as specified and directed

M&L for preparation of newly plastered surfaces of celings and applying three coats of white wash complete all as specified.

M&L Preparation of old plastered or un-plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

S&F vitrified light shade ceramic tiles 10 mm thick (square/rectanglar) polished, area of each tile not exceeding 0.36 sqm ,in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to matched, over and including screed 15mm thick in CM (1:6) complete all as specified and as directed.

All as per item No 77 but as in skirting /dado over and including 10 mm thick bedding layer of CM 1:4 complete all as specified and as directed

Taking down carefully existing aluminium sliding window shutters,(glass/wire mesh) /frame exceeding 1.5 Square Metre and not exceeding 04 Square Metre each and re-fixing the shutters with making good the damaged parts etc in existing position, complete all as specified and directed.

M & L for Machine cut cudappah stoneslab 18-20mm thick over and including 10 mm thick in CM (1:4) screed bed, laid and mixed with pigment to match the shade of the slab window cills and jambs to full thickness of wall, fixed in steps with grey cement paste and slurry including rubbing and polishing complete all as specified and directed

S & F aluminium anodised grills of approved design for window/ventilators/balcony and fixing with F/U channel for window, ventilators, balcony opening in architectural or rectangualr type design in existing building, including drilling as required in RCC sections/ any type of masonary, complete all as specified and directed. Make : DG 102/104 of Decogrill or equivalent in AERO Grill/ Aluminium Profile Associates/ Specialist Grill

Demolition cement concrete (reinforcement cut as required to facilitate demolition) reinforced in any description and in any postion not otherwise specifically provided

M&L for modular work table with 18/19 mm thick prelaminated partcile board both sides , interior grade , of approved shade and pattern with screws to timber frame work and all necessary fittings ( hinges , handles, channels, scrowes , beeding piece haspstaple ), complete all as specified and directed

Taking down the existing wooden cupboard along with brackets fixed with nuts and refixing the same with brackets in any locations with fastners, screws etc complete all as specified and directed.

M&L for STAINLESS WORD "BUREAU OF SAILORS" at any location including screwing , fixing it to the wall with suitable adhesive material, All as completed as directed and specified. Letter Size ( 250x35x25mm with thickness 1.5mm)

Demolition of brick/cement concrete (unreinforced) / pcc tiles from existing roof/terrace etc and also removing/taking down of existing water proofing treatment of any thickness in any position including cleaning the surfaces of roof etc with wire brush complete and removing the retreived debris out side MD land, all as specified and directed.

M&L for 10mm dia TMT bars in various structural RCC elements like column, beams, lintel, chajjas, staircase and Slab etc. including cutting, bending, fixing the bars, tying with binding wires etc. complete all as specified and directed. Note: This item is applicable for additional bars required in the existing RCC structures.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Monolith-PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still sticking upto 40mm thickness including levelling, profiling etc in two layers, each layer not exceeding 20mm,even including necessary scaffolding up to 24 m height, complete all as specified

M& L for preparation of old plaster concrete surface of walls ,chajjas, soffits & beam including necessary scaffolding and applying one coats of 100% antifungal acrylic exterior emulsion paint including necessary scafolding complete all as specified

M&L for preparing new plastered surface of walls, and applying two coat of Distemper oil emulsion over a coat of white cement based putty 3mm thick complete all as specified and directed

M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregate as in levelling course over RCC roof surface to achieve required slope, benching etc including making rounded or chamfered on edges mixed with WPC as per manufacturer's instructions, complete all as specified and directed.

M&L 10 mm thick cement plaster (1:3) to be finished even and smooth on top of roof without using extra cement mixed with WPC @2% by weight of cement, complete all as specified and directed. Note : WPC shall be measured and paid separately as supply only.

M & L for APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2. (viii) Water absorption - Not more than 1% on mass within 24 hours. (ix) Cold flexibility - Minimum (-) 20C. (x) Dimentional stability % change = Maximum 1%.

Supply and Installation & stamping on the freshly laid new concrete including finishing & colouring the top surface accurately to the required level, shape and size (min 4mm thk.) using approved colour shade Colour Hardener and Powder Release Agent and stamping it using approved stamp pattern and antiquing it on top with approved colour using Antiquing Agent Sealing the entire area of stamped concrete using Concrete Sealer. Including staining the extra and above the stamping surface with Acid/Dye/Enviro stain before application of sealer,including formwork with M.S. angle and compaction of concrete etc complete all as specified. Make : Vitco Bomanite or equivalent

M&L for 12-15mm thick dholopur tiles of size 200x100mm fixed in vertical surfaces over and including screed bed or beddding layer of 10mm thick in cement mortar 1:4 set and jointed in cement slurry at pointed in white or coloured cement to match with existing , completed all as specified and diredced

Taking down carefully old unserviceable copper / aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets, and making good disturbed suface of wall, floors, ceiling etc complete all as specified and directed

M & L for Point wiring complete 1.5 Sqmm, single core, PVC insulated FRLS, unsheathed, 1100 Volts grade multistranded copper conductor drawn through in and including PVC casing caping in walls/roofs including PVC insulated copper earth continuity conductor 1.5 Sqmm cable (green) connected to common earth dolly including pressed steel terminal boxes 50 mm deep in walls with laminated sheet top cover 3 mm thick for housing the switches, sockets, regulators etc. all as specified for : (a) One light/fan/bell point controlled by one switch

All as per item No 97 but for one 5 Amps 2 pin / 3 pin switch socket outlet multipurpose on the same board with other switches

All as per item No 97 but for one 5 Amps 2 pin / 3 pin switch socket outlet multipurpose on Independent Board

All as per item No 97 above but wiring complete with 2.5 Sqmm for 3 pin 15A switch socket multipurpose on independent board

S & F Switch Piano, flush type, single pole, one way, 5 Amps, 230 Volts complete all as specified and directed

S & F Ceiling Rose, surface bakelite, three terminals, AC, 230 Volts complete all as specified and directed

S & F Switch Socket combination 2 in 1, 5 Amps, 5 pin multipurpose, flush type, 230 Volts complete all as specified and directed

S & F Switch Socket combination 5 in 1, 15 Amps, 6 pin multipurpose, flush type, 230 Volts complete all as specified and directed

S & F Ceiling fan regulator electronic stepped type, AC, 230 Volts, flush type complete all as specified and directed

S&F sheet metal enclosure , 32A single pole and neutral with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB 32 Amp fixed properly on/in concealed position including dismantling existing UNSV enlosure complete all as specified and directed

S&F sheet metal enclosure TPN MCCB DB 8way, 415 V (vertical type) with bus bar double door type IP 43 - IK 09 with provision of MCCB 125 Amps (as incomer), fixed properly on / in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires including taking down old DB complete all as specified and directed

S&F MCCB 125 Amps, 4 Pole, 415V, 25KA complete all as specified and directed

S & F MCB SP 6 to 32 Amps, 240 / 415 Volts, 50 Hz, 10 KA Breaking capacity complete all as specified and directed

S&F surface hanging and wall mounted batten (double side connection) suitable for LED tube 20/22 watts, 230 volts alongiwth tube rod 22 watt (double side connection), including fixing mounting blocks 2 Nos, 15 mm MS conduit, 1.5 sqmm 3 core PVC insulated copper conductor cable including fixing arrangements and taking down old rusted brackets fittings complete. The fitting shall conform to Cat No REGALBATTENT8UPTO1X22WDSBSWH for fitting and CRYSTAL 1213T8DSTL20WLED865SGLASS for tube rod of Havells/ Wipro/ Bajaj

M & L for 3 core 6 Sqmm PVC insulated wire armoured multistranded copper conductor cable including saddling in wall, cable duct with saddles & spacers connecting to LT panels, distribution board all as specified and directed.

Supply, laying and testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade of 4 core 25 sqmm including saddling in wall, cable duct with lugs & spacers connecting to LT panels etc complete including taking down old unserviceable cable.

Supply & fix in repairs UPVC panel trunking of size 50 mm X 50 mm including spacers, screws, saddles for fixing the trunking in wall/GI sheets of shed complete all as specified and directed

M&L earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground all as specified and directed ( earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to GI strip 32x6mm by means of bolts, nuts, check nuts & washers of galvanized iron all as shown in electrical plate No 3 connected to earth test point all as specified or indicated and testing on completion including necessary excavation and earth work in any type of strata, PCC pit and RCC cover GI protection pipe 15 mm bore light grade upto 7.5 m length earth lead upto meter board, watering pipe, wire mesh etc, all as specified and directed.

Taking Down Ceiling fans 1200/1400 mm sweep and Exhaust Fan any size transporting to store for safe custody for reuse or for depositing at the MES Yard complete all as specified and directed

Fixing only ceiling fan 1200/1400 mm sweep as obtained from taking down vide Ser No 115 herein before including painting of celing fan complete all as specified and directed

Supply & fix 1200 mm sweep ceiling fans and accessories 230 V, BEE 5 star rated complete all as specified and directed

Supply & fix wall mounting fan 450 mm sweep star rated along with blade, canopy, mounting brackets, rubber insulator. The colour of fan shall be of grey and conforms to model No WMHiflow G IG 18" of Crompton/ Orient/ Bajaj/ Havells fans and accessories 230 V, BEE 5 star rated complete all as specified and directed

M&L for taking down of split AC of capacity 1.5 TR to 2.5 TR including indoor & outdoor unit and refixing the same at directed place after carrying out repairs works including provision of wall brackets for indoor unit made of flat iron of size 32 x 6 mm with fastners complete all as specified and directed Note : Copper tube if any required will be measured and paid seperately

S&F 10 mm/ 15 mm bore copper tube for split type AC of capacity 1.5 TR to 2.5 TR including pipe insulation complete all as specified and directed

Laying only existing PVC cable 2.5 sqmm single core including cutting, jointing and testing complete all as specified and directed

S&F 25 mm wide PVC casing caping in walls/ roofs including cutting, jointing and testing complete all as specified and directed. Note : A sum of Rs 37463.00 towards sch of credit shall be deducted to arrive the contract sum.

M/s Hari Om Construction

M/s. GULSHAN CONTRACTION

sahajanand const co.

mp construction co

GAJANAN SALES CORPORATION

A G ENTERPRISES

Atharva Enterprises