Replacement of existing defective LED light fittings with New LED fittings to Executive Engineer Office building and Sitanagar Power house of Electricity Department including Providing extra security lights at Sitanagar Power house area under SD-IV

Amount

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

2 x 1.5 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Above 4.5 metre and upto 6.5 metre

Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted)

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and paint etc. as required.

Supply of 20W LED Retrofit Tube light Batten suitable for 230 Volts,50 Hz AC supply ,Make: Crompton, Model: DIJB12LT8-20 or its equivalent to IS specification.

Supply of 20W LED,6500K, 4 Feet, Retrofit Tube light suitable for 230 Volts,50 Hz AC supply similar to Philips, Model no. 20W865 T8 IND I 2100lm or its equivalent to IS specification.

Supplying and fixing LED street light of following rating with IP66 protection Make: LUKER Sleek series street light product code LSTE-50 or its equivalent.

Supplying of one number XLPE insulated PVC outer sheathed with galvanised round steel wire or steel srtip armoured aluminium conductor power cable of 1.1 KV grade of size 6.0 Sq.mm x 3 core conforming to IS 7098 (Part-I) 1988 amended upto date.

Supplyingh and laying of following size DWC HDPE pipe ISI marked alomg with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.

40 mm dia (OD-40 mm & ID-32 mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1.KV grade of following size in the open surface as required.

Upto 35 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1.KV grade of following size in the existing DWC/RCC/ HUME/METAL pipe as required.

Upto 35 sq.mm

Demolishing cement concrete/bituminous road manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge, (0.30mx0.30mx3.0 m) trench.

Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete, (0.26mx0.26mx3.0 m), but excluding GI pipe dia.

Providing, laying and fixing of 40mm dia GI pipe (medium 'B' class) in the existing trench complete with GI fittings etc. as required.

Fabrication of street light pole 7 meters made up of GI pipe (Class-C) of sizes 65mm and reduced to 40mm dia welded with as per direction of Engineer-in-charge and confroming to IS 1239 (Part-I) 2004 including coating the GI Pole with Red oxide then painting with silver colour paint and finishing to good and also providing FRLS 2x1.5 sq.mm wires complete with connection as per the direction of Engineer-in-charge etc as per required.

Providing and fixing hot press moulded sintex SMC Distirbution Box with double pole MCB 6 to 32A fitted with clamp on the column as per direction of Engineer-in-charge including connections complete etc as required.Similar to Sintex Cat No. GSJB 1414( 140 x 140 x 95) .

BHASKAR CH DAS

M/s Sai Electrical Works

DILIP RAJ