05/HDA/EC-ELECT/2024 2025

Amount

Supply & delivery of LED Flood Light 150 W (+/-5%) for each set, IP 66 protection, 130 V – 270 Volt, 50 Hz., Driver should have in-built protection against high voltage surge, open circuit & short circuit, Housing should be of Die-cast aluminium housing with epoxy powder coating and having cooling fins for effective heat dissipation. Separate cavity for driver & LED lamp, Operating Temperature: 50 Degree centigrade, Test report from NABL accredited laboratory of LM-79, LM-80 & IP-66,The product should have 5 years warranty period.

Supply & delivery of screw type 20w (E-27 base) LED bulb. (Make-Philips, Havells, Bajaj or Equivalent).

Supply and delivery of 1.1 KV grade 4 C X 16 Sq mm XLPE insulated and PVC sheathed aluminum armored Cable. As per IS 7098 Part -1 with latest amendment if any (Make-Polycab, Havells, KEI or equivalent).

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. (excluding the cost of RCC Foundation)

Supply of HDPE pipe [ISI Marked, PE 63, PN 10 / SDR 11] 40 mm dia O.D as per appropriate specification as per IS [IS-4984 : 2016].

Labour for fitting and fixing high density poly-ethylene pipes or P.V.C. pipes for below ground work including cost of jointing materials paints etc. fitting and fixing all necessary specials, cutting pipes, making threads, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps(any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. )

Lifting of the running Under Ground Cable coming to the looping cable Box upto the top of the muffing above the top of the ground level by drawing through 40 mm dia rigid pvc pipe of superior Quality and tiding the same by no 10 SWG G I wire wiyh the pole including supply of pipe & wire & filling the top of the pipe/pipe hole with bitumen and neat cementing properly (average run- 1.5 mtrs/run X 2 runs per pole).

Supply and fixing of SPMCB "B" Curve 1 Amp with ISI marked to be placed on a din channel of Pole and supply and fixing of Terminal connector at the suitable location of the pole.

Loading, Transportation of 10nos old street light pole from office and unloading of those poles.

Straigh through Jointing of cable of different size by compoun jointing kit including S&F ferrul, tapes and jointing materials (Brand approved by EIC)

Fabrication of 10nos old street light pole and make it usable for minimast with half mon bracket arrangement and erection at site of those poles.

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting. (b) 250 x 250 x 100mm

Connection of luminaries with 3C X 1.5 Sqmm pvc insulated FR copper conductor through 9 mtr. Poles from looping box to light fittings as required.

Earthing with Supply GI earth Spike (1830 X 20 mm) (Each Pole).

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. asrequired and mending good damages (ii) No. 6 SWG

Erection of single steel tubular pole of length above 9 mtrs. With sole plate in C.C. (6:3:1) foundation 0.6x0.6x1.91 mtrs. as to G.S. having 600x600x150 mm thick C.C. (4:2:1) base block below sole plate with jhama metal incl. C.C. (6:3:1) muffing 0.3 mtr. dia & 0.3 mtr. above ground level including 3 mm thick neat cemented finish & providing GI earth bolt after making drilled holes etc. on the pole & carriage of pole upto 1.6 km from store depot. to work site including filling up the excavated earth pit with shifted soil & ramming properly.

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint.(a) upto 9.0 mtr. long pole.(i) 1st coat of aluminium paint over 1 coat of RO priming per pole (ii) 2nd coat of aluminium paint over 1st coat

GST @18% of Total Amount

CESS @1% (Total Amount including GST)

Electro Engineering Concern

Madan Trading Company