Repair to Plumbing Work, Sanitary Work, Sewage Treatment and connected work in Md Accn of Shekhawati Line, NPG Line and Hazipir Line of AGE B/R-I under GE (West) Delhi Cantt-10

Amount

M&L 15mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor including taking up or down old GI tube complete all as spd and directed.

All as per item 1 above but 20 mm bore tubing.

All as per item 1 above but 25 mm bore tubing.

All as per item 1 above but 40 mm bore tubing.

M&L 20mm outer dia CPVC pipes SDR 11 with all plain CPVC SDR 11 and elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. CPVC fittings and fixed complete to walls, ceiling or laid in floor including taking up or down 15mm old GI tube complete all as spd and directed.

M&L 25mm outer dia CPVC pipes SDR 11 with all plain CPVC SDR 11 and elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. CPVC fittings and fixed complete to walls, ceiling or laid in floor including taking up or down 20mm old GI tube complete all as spd and directed.

S&F in repairs chromium plated long body brass bib tap fancy type 15mm bore dia complete all as specified and directed.

S&F in repair Brass CP Wall mixer non telephonic type for mixing hot & cold water for Shower screwed down for 15mm bore iron pipe or ferrul complete all as spd and directed.

S&F in repair Brass CP center hole basin mixer for mixing hot & cold water for 15mm bore iron pipe or ferrule complete all as specified and directed.

Supply and fix in repair Brass CP mixer swivel spout for mixing hot & cold water for Sink screwed down for 15mm bore iron pipe or ferrule of complete all as specified and directed.

S&F in repairs 15mm bore dia fancy type chromium plated stop valves/angle valve cast copper alloys as per site requirement complete all as specified and directed.

S&F in repairs 15mm bore dia Pillar tap fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly-nuts screwed for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore dia long body bib tap of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-47gms) complete all as specified and directed

S&F in repairs 15mm bore dia long shank and cup ( concealed type ) Stop valve/angle valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-90gms) complete all as specified and directed.

S&F in repairs brass CP shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union fixed in repairs complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack made out of stainless steel sheets 1mm thick overall size 600mm x 750mm x 250mm including complete all as specificed and directed.

S&F in repairs cast copper alloy chromium plated Health faucet (ABS Body) with flexible tube of 1.25 mtr length complete all as specified and directed.

S&F in repairs 15mm size PVC connection 450mm long with PTMT nuts complete all as specified and directed.

S&F in repairs on PVC connection 15mm size wth PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs 32mm dia waste fitting brass chromium plated for wash hand basin and Sink as per site requirement complete all as directed.

S&F in repairs 100 mm dia CP grating round with hole / without hole size as per site rquiremet complete all as specified and directed.

S&F in repairs 32mm dia and 750mm long PVC waste pipe for WHB and kitchen sink with union complete all as specified and directed.

S&F in repairs water tank lid for 500 ltr capacity complete all as specified and directed.

S&F in repair ball/float valve high pressure of PTMT with epoxy coated aluminum rod and high density polythene float and flynut complete, screwed for iron pipe or brass furrule size 20/25mm bore. complete all as directed)

S&F in repairs float valve 20mm PTMT with complete accessories suitable for low level flushing cistern complete all as specified and directed.

S&F in repairs plastic water closet seat cover white, closed pattern with flat bottom, cover with mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs 600mm long tubular towel rails 20mm dia, D type between flanges of brass chromium plated complete all as specified and directed.

S&F in repairs brass face internal fittings for bib tap and pillar tap complete all as specified and directed.

S&F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee, union etc for 15 mm bore pipe complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type flushing cistern 10 ltr capacity low level white or coloured with inlet, ball valve float and handle including brackets complete all as specified and directed.

Supply & Fix in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 x 420mm bowl size 410 x 330mm x 160mm complete all as specified and directed.

Supply and fix in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever, brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed

S&F in repairs 25mm dia stainless steel curtain rods with stainless steel brackets (for 1m - 2 brackets including fancy type funeral (Lattu)) complete all as specified and directed by engineer in charge.

S&F in repair viterous china wash down water closet pan ( pedestal pattern ) incl 100mm P or S Trap of Cast iron, white and connection with cistern complete all as specified and directed.

S&F in repair vitreous china squatting pan, 'Orissa' pattern, size 580 x 400mm white with P/S 100mm trap incl integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rebbish of premises complete all as specified and directed.

M&L for non skid colour ceramic rectified tiles 300×300×7 to 8 mm thick thick (square/rectangular) area of each tiles exceeding 0.06Sqm but not exceeding 0.11Sqm, in floors etc, set jointed in neat cement slurry & pointed in coloured cement to match and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for coloured printed glazed ceramic tiles of size 350x 250x 7 mm/ 450X 350X 7mm on vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 10mm thick in cement mortar 1:4, complete all as specified and directed.

M&L for Non - skid Ceramic tiles 600×600×7 to 8 mm thick thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

S & F in repair 500 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) triple layer white in colour hoisted and fixed in position including dismantling and removing to store complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work upto 4 storey etc not other specifically provided for complete all as specified and directed.

S & F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as specified and directed.

M&L for providing reinforced cement concrete TypeB0 1:2:4 (12.5mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as spd & directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat rough finiched surfaced of concrete complete all as spd & directed by Engr-in-charge.

M&L for 18mm thick, granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in 15mm thick cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F in repair 100mm dia CI bends or diminishing pieces fixed to wall/floor with cement joint complete all as specified and directed.

S&F in repair 100mm sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to wall in repair complete all as specified and directed.

S&F in repair 100mm bore CI tee, Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fixed with cement joint complete all as specified and directed.

S&F in repair sand 75mm dia CI bends or diminishing pieces fixed to wall/floor with cementjoints complete all as specified and directed.

S&F in repair 75mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to wall in repair complete all as specified and directed.

S&F in repair 75mm bore CI tee, Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with cement joint complte all as specified and as directed.

S & F in repair stack clamp made of 50 mm X 5 mm flat iron and 16 mm dia round iron stay including nut bolts and securing ends of stay to wall or roof suitable for 110 mm bore pipe complete all as specified and directed.

S & F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps and neatly finshed with cement mortar wherever required all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110mm bore of pipe complete all as specified and directed.

S & F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as completed and specified and directed.

S&F in repair PVC (SWR) bends any radius 75mm bore of pipe complete all as specified and directed.

M & L for brick work with sub class ' B' brick straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:4 including all arrangement including demolition brick work complete all as specified and directed.

M & L Rendering 5mm thick in ready mix on ceiling to be finished even and fair (without using extra lime or cement) as in patch works or whole work including taking down cement plaster complete all as specified and directed..

M & L for Internal/External Rendering 12-15mm thick in ready mix on brick work or concrete surfaces to be finished even and fair (without using extra lime or cement) as in patch works or whole work including taking down cement plaster complete all as specified and directed.

M & L Rendering 12-15mm thick in ready mix on brick work or concrete surfaces to be finished even and fair (without using extra lime or cement) as complete all as specified and directed..

M & L for preparation of new surfaces of wall and apply two coats of distempering walls with distemper oil emulsion, white or tinted over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparation of old treated surfaces of walls/ceiling and applying one coat of oil bound distemper complete all as specified and directed by Engr-in-Charge (Note :- Height of building upto 04 storey)

M&L for preparation of old treated surfaces of walls and applying one coat of cement base paint using spray gun/roller brushes complete all as specified and directed by Engr-in-Charge (Note :- Height of building upto 04 storey)

M&L for complete removal of old treatment and preparation of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 1 mm thick wall care putty wherever required to bring uniform surafce complete all as specified.

M&L for flush pointing to bricks laid flat or brick tiles in pavings /roof in C:M 1:3 mixec with 5% crude oil by weight of cement including racking out of existing joints or brick tiles complete all as specified and directed

M&L 40mm thick brick tiles laid on 15mm thic cement mortar 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed including dismantling old brick tiles.

Dismantling Brick tiles or terracing tiles, single layer on roofs including thatching any type, demolition of mud phuska up to 450mm thick etc including cleaning the surface by water/air pressure and removal of debrish beyond MOD land complete all as specified and directed ( Note: height of building upto 04 storey).

M&L for brushing neat cement slurry with 3.Kg of cement per sqm complete all as specified and directed ( Note: height of building upto 04 storey).

M&L for providing cement concrete 1:2:4 type B-I 20mm graded in roof padding, roof kerb or mud slops, rounded or chamfered on edges, plinth courses, coping, kneelers, apex stone, kerb water tough and the like including weathering, slightly rounded or chamfered angles and throating as directed) complete including necessary form work all as specified and directed ( Note: height of building upto 04 storey).

M&L for rendering 10mm thick cement mortar 1:4 on fair face of brick work or concrete surface complete all as specified and as directed ( Note: height of building upto 04 storey).

M&L for water proofing treatment to roof surface with APP water proofing membrane 3mm thick & weighing not less than 3.0 kg/sqm of approved make black finish & reinforced with non woven polyester matt of min 150 gm/sqm laid over a coat of bitumen primer conforming to IS-3384 @ 0.4 Ltr/sqm over prepared roof surfaces, forcing overlap with a propane or a butane gas torch with a overlap of 100mm at sides & 100mm at ends & sealing as per manufacturer's instructions Note :- 1. Water proofing treatment shall be got carried out by the manufacturer or their authorised applicator only. 2. Bitumen primer, bitumen and membrane shall be of same make/manufacturer. ( Note: height of building upto 04 storey).

M&L for cutting groove in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement Mortar 1:3 for fixing of APP membrane and filling the groove with PCC 1:2:4 type B0 using 12.5mm graded stoen aggregate after inserting membrane complete all as specified and directed.

S & F for Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner complete all as specified and directed.

A S CONSTRUCTION CO. (BID ID -3317366)

Chandramauli Engineers Pvt. Ltd. (BID ID -3325474)

M/S Davinder Kumar (BID ID -3317658)

MAA SANTOSHI ENTERPRISES (BID ID -3323664)

M/s M M BAHL (BID ID -3317254)