Construction of 24 Nos additional structures for enhancement accommodation capacity in 05 Nos Composite BOPs in Dampa Tiger Reserve Forest (DTRF) in A

Abstract of Cost for Additional Structure works in 5 Nos BOP,s inside DTRF

S.No Head Sub-Head Amount (Rs)

1 Civil works Earth work 17398080.00

Concrete works 10872263.00

RCC works 57209514.00

Masonary works 15730884.00

Stone works 36688550.00

Cladding works 1446054.00

Wood & PVC works 5189965.00

Steel works 22917368.00

Flooring 13463857.00

Roofing 16862830.00

Finishing 8066382.00

Road works 8272454.00

Sanitary installation 3048694.00

Water Supply 1202951.00

Drainage 3343218.00

Furniture 8696374.00

2 Electrical Electrical items 10166657.00 4978070.00

Grand total 245554165.00

Grand total 245554165.00

Digitally signed by

AVANISH AVANISH KUMAR

KUMAR 19:04:12 IST

SCHEDULE OF QUANTITIES

Description of Item Quantity Unit Rate (Rs) Amount(Rs)

SH:1 Sub-Head : Earth Work

Earth work in surface excavation not exceeding

30 cm in depth but exceeding 1.5 m in width as

1.1 2.1 well as 10 sqm on plan including getting out and

disposal of excavated earth upto 50 m and lift up

to 1.5 m, as directed by Engineer-in-Charge:

Earth work in excavation by mechanical means

(Hydraulic excavator) / manual means over areas

(exceeding 30cm in depth, 1.5m in width as well

1.2 2.6 as 10 sqm on plan) including getting out and 0.00

disposal of excavated earth, lead up to 50m and

lift up to 1.5m,as directed by Engineer-in-Charge.

Earth work in excavation by mechanical means

(Hydraulic excavator) / manual means over areas

(exceeding 30 cm in depth, 1.5m in width as well

1.3 2.7 as 10 sqm on plan) including getting out and 0.00

disposal of excavated earth, lead up to 50 m and

lift up to 1.5m, as directed by Engineer-in-Charge.

Earth work in excavation by mechanical means

(Hydraulic excavator) / manual means in

foundation trenches or drains (not exceeding 1.5

m in width or 10 sqm on plan) including dressing

1.4 2.8 of sides and ramming of bottoms, lift up to 1.5 m, 0.00

including getting out the excavated soil and

disposal of surplus excavated soil as directed,

within a lead of 50 m.

Filling available excavated earth (excluding rock)

in trenches, plinth, sides of foundations etc. in

1.5 2.25 layers not exceeding 20cm in depth, 2850.00 Cum 413.25 1177763.00

consolidating each deposited layer by ramming

for every up to 50 m

additional liftand

1.6 2.26 thereof in excavation /banking excavated or 0.00

stacked materials.

1.6.2 2.26.2 Ordinary or hard rock. 1211.00 Cum 304.97 369319.00

Supplying and filling in plinth with sand under

1.7 2.27 floors, including watering, ramming, consolidating 739.00 Cum 3674.47 2715433.00

and dressing complete.

Total of the Sub-Head - Earth Work : 0 17398080.00

SH:2: Concrete Work 0

Providing and laying in position cement concrete

of specified grade excluding the cost of centering

2.1 4.1 and shuttering - All work up to plinth level : 0.00

1:4:8 (1 Cement : 4 coarse sand(zone-III) : 8

graded stone aggregate 40 mm nominal size).

Providing and laying damp-proof course 40mm

thick with cement concrete 1:2:4 (1 cement : 2

2.2 4.10 coarse sand(Zone III) : 4 graded stone aggregate 305.00 Sqm 654.54 199635.00

12.5mm nominal size).

Providing and applying a coat of residual

petroleum bitumen of grade of VG-10 of approved

quality using 1.7kg per square metre on damp

2.3 4.13 proof course after cleaning the surface with 305.00 Sqm 206.95 63120.00

brushes and finally with apiece of cloth lightly

soaked in kerosene oil.

DSR-2018 Page 1 of 16

Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Making plinth protection 50mm thick of cement

concrete 1:3:6 (1 cement : 3 coarse sand : 6

graded stone aggregate 20 mm nominal size)

over 75mm thick bed of dry brick ballast 40 mm

2.4 4.17 nominal size, well rammed and consolidated and 1273.00 Sqm 1155.27 1470659.00

grouted with fine sand, including necessary

excavation leveling and dressing and finishing

the top smooth.

Total of the Sub-Head - Concrete Work : 10872263.00

SH:3 : Reinforced Cement Concrete

Centering and shuttering including strutting,

propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for

Walls (any thickness) including attached

3.1.2 5.9.2 pilasters, butteresses, plinth and string courses 1400.00 Sqm 1146.34 1604876.00

Lintels, beams, plinth beams, girders, bressumers

and cantilevers

Columns, Pillars, Piers, Abutments, Posts and

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position

and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position

and binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-

Providing and laying in position machine batched

and machine mixed design mix M-25 grade

cement concrete for reinforced cement concrete

work, using cement content as per approved

design mix, including pumping of concrete to site

of laying but excluding the cost of centering,

shuttering, finishing and reinforcement, including

admixtures in recommended proportions as per

IS: 9103 to accelerate, retard setting of concrete,

improve workability without impairing strength

and durability as per direction of Engineer-in-

charge. (Note :- Cement content considered in

this item is @ 330 kg/cum. Excess/ less cement

used as per design mix is payable/recoverable

3.4.1 5.33.1 All works upto plinth level 1165.00 Cum 15046.12 17528730.00

3.4.2 5.33.2 All works above plinth level upto floor V level 883.00 Cum 17686.76 15617409.00

Total of the Sub-Head - Reinforced Cement 57209514.00

SH:4 : Masonry Work

Brick work with common burnt clay F.P.S. (non

4.1 6.1 modular) bricks of class designation 7.5 in 0.00

foundation and plinth in:

4.1.1 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 284.00 Cum 11584.63 3290035.00

Brick work with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in

4.2 6.4 superstructure above plinth level up to floor V 0.00

level in all shapes and sizes in :

4.2.1 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 625.00 Cum 14280.67 8925419.00

Half brick masonry with common burnt clay F.P.S.

(non modular) bricks of class designation 7.5 in

4.3 6.13 superstructure above plinth level up to floor V 0.00

4.3.1 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 1846.00 Sqm 1753.65 3237238.00

Extra for providing and placing in position 2 Nos

4.4 6.15 6mm dia. M.S. bars at every third course of half 1846.00 Sqm 150.70 278192.00

brick masonry.ird course of half brick masonry.

DSR-2018 Page 2 of 16

Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Total of the Sub-Head - Masonry Work : 15730884.00

Sub-Head:5 : Stone Work

Random rubble masonry with hard stone in

foundation and plinth including levelling up with

5.1 7.1 cement concrete 1:6:12 (1 cement : 6 coarse 0.00

sand : 12 graded stone aggregate 20mm nominal

size) upto plinth level with :

5.1.1 7.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand). 1080.00 Cum 11515.67 12436924.00

Random rubble masonry with hard stone in

superstructure above plinth level and upto floor

five level, including leveling up with cement

5.2 7.2 concrete 1:6:12 (1 cement : 6 coarse sand : 12 0.00

graded stone aggregate 20mm nominal size) at

window sills, ceiling level and the like.

5.2.1 7.2.1 Cement mortar 1:6 (1 cement : 6 coarse sand). 1721.00 Cum 14091.59 24251626.00

Total of the Sub-Head - Stone Work : 36688550.00

SH:6 : Cladding Work

Providing and fixing Ist quality ceramic glazed

wall tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approvedmake,

in all colours, shades except burgundy, bottle

green, black of any size as approved by Engineer-

6.1 8.31 in-Charge, in skirting, risers of stepsand dados, 746.00 Sqm 1938.41 1446054.00

over 12 mm thick bed of cement mortar 1:3 (1

cement : 3 coarse sand) and jointing with grey

cement slurry @ 3.3kg per sqm, including

pointing in white cement mixed with pigment of

matching shade complete.

Total of the Sub-Head - Cladding Work : 1446054.00

SH:7 : Wood and P.V.C. Work

Providing and fixing ISI marked flush door

shutters conforming to IS : 2202 (Part I) non-

decorative type, core of block board construction

7.1 9.21 with frame of 1st class hard wood and well 0.00

matched commercial 3 ply veneering with vertical

grains or cross bands and face veneers on both

faces of shutters:

35 mm thick including ISI marked Stainless Steel

butt hinges with necessary screws.

Providing and fixing wire gauge shutters using

galvanized M.S. wire gauge of average width of

7.2 9.27 aperture 1.4 mm in both directions with wire of dia 0.00 0.00

0.63 mm, for doors, windows and clerestory

windows with hinges and necessary screws :

7.2.1 9.27.1 35 mm thick shutters. 0.00 0.00

with ISI marked M.S. pressed butt hinges bright

7.2.1.1 9.27.1.11 finished of required size - Second class teak 119.00 Sqm 7941.77 945071.00

Providing and fixing curtain rods of 1.25 mm thick

chromium plated brass plate, with two chromium

7.3 9.46 plated brass brackets fixed with C.P. brass 0.00 0.00

screws and wooden plugs, etc., wherever

necessary complete :

Providing and fixing M.S. grills of required pattern

in frames of windows etc. with M.S. flats, square

7.4 9.48 or round bars etc. including priming coat with 0.00 0.00

approved steel primer all complete.

7.4.1 9.48.1 Fixed to steel windows by welding. 6411.00 Kg 311.00 1993821.00

Providing and fixing oxidised M.S. casement

7.5 9.68 stays (straight peg type) with necessary screws 0.00 0.00

7.5.1 9.68.2 250 mm weighing not less than 150 gms. 1064.00 Each 96.70 102889.00

Providing and fixing aluminium sliding door bolts

ISI marked anodised (anodic coating not less

7.6 9.96 than grade AC 10 as per IS : 1868) transparent or 0.00 0.00

dyed to required colour or shade with nuts and

screws etc. complete :

DSR-2018 Page 3 of 16

Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Providing and fixing aluminium tower bolts ISI

marked anodised (anodic coating not less than

7.7 9.97 grade AC 10 as per IS : 1868 ) transparent or 0.00 0.00

dyed to required colour or shade with necessary

screws etc. complete :

Providing and fixing aluminium handles ISI

marked, anodised (anodic coating not less than

7.8 9.100 grade AC 10 as per IS : 1868) transparent or 0.00 0.00

dyed to required colour or shade with necessary

screws etc. complete :

Providing and fixing aluminium hanging floor

door stopper, ISI marked, anodised (anodic

7.90 9.101 coating not less than grade AC 10 as per IS : 0.00

1868) transparent or dyed to required colour and

shade, with necessary screws etc. complete.

7.9.1 9.101.2 Twin rubber stopper 157.00 Each 116.74 18328.00

Providing and fixing factory made P.V.C. door

frame of size 50x47 mm with a wall thickness of 5

mm, made out of extruded 5mm rigid PVC foam

sheet, mitred at corners and joined with 2 Nos of

150 mm long brackets of 15x15 mm M.S. square

tube, the vertical door frame profiles to be

7.10 9.119 reinforced with 19x19 mm M.S. square tube of 19 147.00 mtr 736.85 108317.00

gauge, EPDM rubber gasket weather seal to be

provided through out the frame. The door frame to

be fixed to the wall using M.S. screws of 65/100

mm size, complete as per manufacturer’s

specification and direction of Engineer-in-

Providing and fixing factory made panel PVC

door shutter consisting of frame made out of M.S.

tubes of 19 gauge thickness and size of 19 mm x

19 mm for styles and 15x15 mm for top & bottom

rails. M.S. frame shall have a coat of steel primers

of approved make and manufacture. M.S. frame

covered with 5 mm thick heat moulded PVC ‘C’

channel of size 30mm thickness, 70 mm width out

of which 50 mm shall be flat and 20 mm shall be

tapered in 45 degree angle on both side forming

styles and 5 mm thick, 95 mm wide PVC sheet out

of which 75 mm shall be flat and 20 mm shall be

7.11 9.120 tapered in 45 degree on the inner side to form top 0.00

and bottom rail and 115 mm wide PVC sheet out

of which 75 mm shall be flat and 20 mm shall be

tapered on both sides to form lock rail. Top,

bottom and lock rails shall be provided both side

of the panel. 10 mm (5 mm x 2 ) thick, 20 mm

wide cross PVC sheet be provided as gap insert

for top rail & bottom rail, paneling of 5 mm thick

both side PVC sheet to be fitted in the M.S. frame

welded/ sealed to the styles & rails with 7 mm (5

mm+2 mm) thick x 15 mm wide PVC sheet

beading on inner side, and joined together with

solvent cement adhesive. An additional 5 mm

thick PVC strip of 20 mm width is to be stuck on

7.11.1 9.120.1 30 mm thick plain PVC door shutters. 147.00 Sqm 4559.38 670229.00

Total of the Sub-Head - Wood And P.v.c. Work : 5189965.00

SH:8 : Steel Work

Structural steel work in single section, fixed with

or without connecting plate,including cutting,

8.1 10.1 hoisting, fixing in position and applying a priming 6964.00 Kg 161.89 1127402.00

coat of approved steel primer all complete

DSR-2018 Page 4 of 16

Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Providing and fixing factory made ISI marked

steel glazed doors, windows and ventilators, side

/top /centre hung, with beading and all members

such as F7D,F4B, K11 B and K12 B etc. complete

of standard rolled steel sections, joints mitred and

flash butt welded and sash bars tenoned and

8.2 10.11 riveted, including providing and fixing of hinges, 0.00

pivots, including priming coat of approved steel

primer, but excluding the cost of other fittings,

complete all as per approved design, (sectional

weight of only steel members shall be measured

Fixing with 15x3 mm lugs 10 cm long embedded

in cement concrete block 15x10x10 cm of C.C.

aggregate 20 mm nominal size)

Providing and fixing T-iron frames for doors,

windows and ventilators of mild steel Tee-

sections, joints mitred and welded, including

8.3 10.13 fixing of necessary butt hinges and screws and 0.00

applying a priming coat of approved steel primer.

Fixing with 15x3 mm lugs 10 cm long embedded

in cement concrete block 15x10x10 cm of C.C.

1:3:6 (1 Cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size).

Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) trusses etc.,

including cutting, hoisting, fixing in position and

8.4 10.16 applying a priming coat of approved steel primer, 0.00

including welding and bolted with special shaped

washers etc. complete.

8.4.1 10.16.1 Hot finished welded type tubes. 55313.00 Kg 269.89 14928426.00

Providing and fixing M.S. fan clamp type I or II of

16 mm dia M.S. bar, bent to shape with hooked

8.5 10.17 ends in R.C.C. slabs or beams during laying, 119.00 Each 322.00 38318.00

including painting the exposed portion of loop, all

as per standard design complete.

Providing and fixing mild steel round holding

8.6 10.19 down bolts with nuts and washer plates complete. 1206.00 Kg 157.76 190259.00

Providing & fixing fly proof wire gauze to

8.7 10.29 windows, clerestory windows & doors with M.S. 0.00

Flat 15 x 3mm and nuts & bolts complete.

Stainless steel (grade 304) wire gauze of 0.5 mm

dia wire and 1.4 mm aperture on both sides.

Providing & fixing glass panes with putty and

8.8 10.30 glazing clips in steel doors, windows, clerestory 0.00

windows all complete with :

Total of the Sub-Head - Steel Work : 22917368.00

SH:9 : Flooring

9.1 62 mm thick cement concrete flooring with

concrete hardener topping, under layer 50 mm

thick cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 20mm nominal

size) and top layer 12mm thick cement hardener

consisting of mix 1:2 (1 cement hardener mix : 2

graded stone aggregate, 6mm nominal size) by 120 Sqm 1607.28 192873.6

volume, hardening compound mixed @ 2 litre per

50 kg of cement or as per manufacture’s

specifications. This includes cost of cement slurry,

but excluding the cost of nosing of steps etc.

DSR-2018 Page 5 of 16

Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Kota stone slab flooring over 20 mm (average)

thick base laid over and jointed with grey cement

slurry mixed with pigment to match the shade of

9.2 11.26 the slab including rubbing and polishing 0.00

complete with base of cement mortar 1 : 4 (1

cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps,

skirting, dado and pillars laid on 12 mm (average)

thick cement mortar 1:3 (1 cement 3 coarse sand)

9.3 11.27 and jointed with grey cement slurry mixed with 155.00 Sqm 3405.43 527842.00

pigment to match the shade of the slabs,

including rubbing and polishing complete.

Extra for pre finished nosing in treads of steps of

Kota stone/ sand stone slab.

Providing and laying rectified Glazed Ceramic

floor tiles of size 300x300 mm or more (thickness

to be specified by the manufacturer), of 1st quality

conforming to IS : 15622, of approved make, in all

colours, shades, except White, Ivory, Grey, Fume

9.5 11.40 Red Brown, laid on 20 mm thick Cement Mortar 1300.83 Sqm 2202.55 2865143.00

1:4 (1 Cement : 4 Coarse sand), jointing with grey

cement slurry @ 3.3kg/sqm including pointing the

joints with white cement and matching pigments

etc., complete.

Providing and laying vitrified floor tiles in different

sizes (thickness to be specified by the

manufacturer) with water absorption less than

0.08%and conforming to IS : 15622 , of approved

make, in all colours and shades, laid on 20mm

9.6 11.41 thick cement mortar 1:4 (1 cement : 4 coarse 0.00

sand) jointing with grey cement slurry @

3.3kg/sqm including grouting the joints with white

cement and matching pigments etc., complete.

Total of the Sub-Head - Flooring : 13463857.00

SH :10: Roofing

Providing and fixing M.S. holder bat clamps of

approved design to C.I. or S.C.I. rain water pipes

embedded in and including cement concrete

10.1 12.38 blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 0.00

coarse sand : 4 graded stone aggregate 20 mm

nominal size) and cost of cutting holes and

making good the walls etc. :

Providing and fixing on wall face unplasticised

Rigid PVC rain water pipes conforming to IS :

10.2 12.41 13592 Type A, including jointing with seal ring 0.00

conforming to IS : 5382, leaving 10 mm gap for

thermal expansion, (i)Single socketed pipes.

Providing and fixing on wall face unplasticised -

PVC moulded fittings/ accessories for

unplasticised Rigid PVC rain water pipes

10.3 12.42 conforming to IS : 13592 Type A including jointing 0.00

with seal ring conforming to IS :5382 leaving 10

mm gap for thermal expansion.

DSR-2018 Page 6 of 16

Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Providing and fixing unplasticised -PVC pipe

clips of approved design to unplasticised - PVC

rain water pipes by means of 50x50x50 mm

10.4 12.43 hardwood plugs, screwed with M.S. screws of 0.00

required length including cutting brick work and

fixing in cement mortar 1:4 (1 cement : 4 coarse

sand) and making good the wall etc. complete.

Providing and fixing precoated galvanised iron

profile sheets (size, shape and pitch of

corrugation as approved by Engineer-in-charge)

0.50 mm (+ 0.05 %) total coated thickness with

zinc coating 120 grams per sqm as per IS: 277, in

240 mpa steel grade, 5-7 microns epoxy primer

on both side of the sheet and polyester top coat

15-18 microns. Sheet should have protective

guard film of 25 microns minimum to avoid

10.5 12.50 scratches during transportation and should be 5175.00 Sqm 1180.67 6109967.00

supplied in single length upto 12 metre or as

desired by Engineerin- charge. The sheet shall

be fixed using self drilling /self tapping screws of

size (5.5x 55 mm) with EPDM seal, complete upto

any pitch in horizontal/ vertical or curved

surfaces, excluding the cost of purlins, rafters and

trusses and including cutting to size and shape

wherever required.

Providing and fixing precoated galvanised steel

sheet roofing accessories 0.50 mm (+0.05 %)

total coated thickness, Zinc coating 120 grams

10.6 12.51 per sqm as per IS: 277, in 240 mpa steel grade, 5- 0.00

7 microns epoxy primer on both side of the sheet

and polyester top coat 15-18 microns using self

drilling/ self tapping screws complete :

Providing and Fixing 15 mm thick densified

tegular edged eco friendly light weight calcium

silicate false ceiling tiles of approved texture of

size 595 x 595 mm in true horizontal level,

suspended on inter locking metal grid of hot

dipped galvanised steel sections (galvanising @

120 grams per sqm including both side)

consisting of main ‘T’ runner suitably spaced at

joints to get required length and of size 24x38

mm made from 0.33 mm thick (minimum) sheet,

spaced 1200 mm centre to centre, and cross “T”

of size 24x28 mm made out of 0.33 mm

10.7 12.58 (Minimum) sheet, 1200 mm long spaced between 2237.00 Sqm 3092.93 6918884.00

main ’T’ at 600 mm centre to centre to form a grid

of 1200x600 mm and secondary cross ‘T’ of

length 600 mm and size 24 x 28 mm made of

0.33 mm thick (Minimum) sheet to be inter locked

at middle of the 1200x 600 mm panel to from grid

of size 600x600 mm, resting on periphery walls

/partitions on a Perimeter wall angle pre-coated

steel of size (24x24x3000 mm made of 0.40 mm

thick (minimum) sheet with the help of rawl plugs

at 450 mm centre to centre with 25 mm long dry

wall screws @ 230 mm interval and laying 15 mm

thick densified edges calcium silicate ceiling tiles

of approved texture in the grid, including, cutting/

Total of the Sub-Head - Roofing : 16862830.00

SH:11 : Finishing

11.1 13.1 12 mm cement plaster of mix : 0.00

15 mm cement plaster on the rough side of single

or half brick wall of mix :

DSR-2018 Page 7 of 16

Description of Item Quantity Unit Rate (Rs) Amount(Rs)

12 mm cement plaster finished with a floating

coat of neat cement of mix :

11.4 13.16 6 mm cement plaster of mix : 0.00

Distempering with 1st quality acrylic distemper

(ready mixed) having VOC content less than 50

11.5 13.42 gms/litre, of approved manufacturer, of required 0.00

shade and colour complete, as per

manufacturer's specification.

11.5.1 13.42.1 Two or more coats on new work. 3378.00 Sqm 163.96 553857.00

Finishing walls with Acrylic Smooth exterior paint

of required shade :

New work (Two or more coat applied @ 1.67

11.6.1 13.46.1 ltr/10 sqm over and including priming coat of 2944.00 Sqm 309.87 912257.00

exterior primer applied @ 2.20 kg/10 sqm).

11.7 13.50 Applying priming coat : 0.00

With ready mixed pink or Grey primer of approved

11.7.1 13.50.1 brand and manufacture on wood work (hard and 481.00 Sqm 107.33 51626.00

Finishing with Epoxy paint (two or more coats) at

all locations prepared and applied as per

11.8 13.52 manufacturer's specifications including 0.00

appropriate priming coat, preparation of surface,

Wall painting with acrylic emulsion paint of

11.9 13.60 approved brand and manufacture to give an even 0.00

11.9.1 13.60.1 Two or more coats on new work. 1524.00 Sqm 242.04 368869.00

Painting with synthetic enamel paint of approved

brand and manufacture to give an even shade :

11.10.1 13.61.1 Two or more coats on new work. 1576.00 Sqm 228.68 360400.00

Providing and applying white cement based putty

of average thickness 1 mm, of approved brand

11.11 13.80 and manufacturer, over the plastered wall surface 6753.00 Sqm 216.64 1462970.00

to prepare the surface even and smooth

Total of the Sub-Head - Finishing : 8066382.00

SH:12 : Road Work

Providing and laying C.C. pavement of mix M-25

with ready mixed concrete from batching plant.

The ready mixed concrete shall be laid and

finished with screed board vibrator , vacuum

dewatering process and finally finished by

floating, brooming with wire brush etc. complete

12.1 16.75 as per specifications and directions of Engineer- 240.00 Cum 16298.66 3911678.00

in charge. (The panel shuttering work shall be

paid for separately). (Note:- Cement content

considered in this item is @ 330 kg/cum.

Excess/less cement used as per design mix is

payable/ recoverable separately).

Fencing with angle iron post placed at required

distance embedded in cement concrete blocks,

every 15th post, last but one end post and corner

post shall be strutted on both sides and end post

on one side only and provided with horizontal

lines and two diagonals interwoven with

12.2 16.18 horizontal wires, of barbed wire weighing 9.38 kg 0.00

per 100 m (minimum), between the two posts

fitted and fixed with G.I. staples, turn buckles etc.

complete. (Cost of posts, struts, earth work and

concrete work to be paid for separately) :-

Payment to be made per metre cost of total length

of barbed wire used.

DSR-2018 Page 8 of 16

Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Supplying at site Angle iron post & strut of

required size including bottom to be split and

12.3 16.19 bent at right angle in opposite direction for 10 cm 18900.00 Kg 173.84 3285576.00

length and drilling holes upto 10 mm dia. etc.

Total of the Sub-Head - Road Work : 8272454.00

SH:13: Sanitary Installations

Providing and fixing water closet squatting pan

(Indian type W.C.pan ) with 100 mm sand cast

Iron P or S trap, 10 litre low level white P.V.C.

flushing cistern, including flush pipe, with

13.1 17.1 manually controlled device (handle lever) 0.00

conforming to IS : 7231, with all fittings and

fixtures complete, including cutting and making

good the walls andfloors wherever required:

White Vitreous china Orissa pattern W.C. pan of

size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal

type water closet (European type W.C. pan) with

seat and lid, 10 litre low level white P.V.C.

flushing cistern, including flush pipe, with

13.2 17.2 manually controlled device (handle lever), 0.00

conforming to IS : 7231, with all fittings

andfixtures complete, including cutting and

making good the walls and floors wherever

W.C. pan with ISI marked white solid plastic seat

Providing and fixing white vitreous china flat back

or wall corner type lipped front urinal basin of

430x260x350 mm and 340x410x265 mm sizes

respectively with automatic flushing cistern with

13.3 17.4 standard flush pipe and C.P. brass spreaders 0.00

with brass unions and G.I clamps complete,

including painting of fittings and brackets, cutting

and making good the walls and floors wherever

Range of two urinal basins with 5 litre white

P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I.

brackets, 15 mm C.P. brass pillar taps, 32 mm

13.4 17.7 C.P. brass waste of standard pattern, including 0.00

painting of fittings and brackets, cutting and

making good the walls wherever require:

White Vitreous China Wash basin size 630x450

mm with a single 15 mm C.P. brass pillar tap

Providing and fixing 8 mm dia C.P. / S.S. Jet with

flexible tube upto 1 metre long with S.S. triangular

13.5 17.16A plate to Eureopean type W.C. of quality and make 57.00 Each 559.81 31909.00

as approved by Engineer - in - charge.

Providing and fixing P.V.C. waste pipe for sink or

13.6 17.28 wash basin including P.V.C. waste fittings 0.00

13.6.1 17.28.2 Flexible pipe 0.00

Providing and fixing 600x450 mm beveled edge

mirror of superior glass (of approved quality)

13.7 17.31 complete with 6 mm thick hard board ground 70.00 Each 2413.93 168975.00

fixed to wooden cleats with C.P. brass screws

and washers complete.

Providing and fixing 600x120x5 mm glass shelf

with edges round off, supported on anodised

13.8 17.33 aluminium angle frame with C.P. brass brackets 34.00 Each 1583.76 53848.00

and guard rail complete fixed with 40 mm long

screws, rawl plugs etc., complete.

13.9 17.34 Providing and fixing toilet paper holder : 0.00

DSR-2018 Page 9 of 16

Description of Item Quantity Unit Rate (Rs) Amount(Rs)

13.1 17.35 Providing and fixing soil, waste and vent pipes : 0.00

Centrifugally cast (spun) iron socket & spigot

(S&S) pipe as per IS: 3989.

Providing and fixing bend of required degree with

13.11 17.38 access door, insertion rubber washer 3 mm thick, 0.00

bolts and nuts complete.

Providing and fixing plain bend of required

Providing lead caulked joints to sand cast

13.13 17.58 iron/centrifugally cast (spun) iron pipes and 0.00

fittings of diameter:

Providing and fixing trap of self cleansing design

with screwed down or hinged grating with or

13.14.1 17.60 without vent arm complete, including cost of 0.00

cutting and making good the walls and floors :

13.14.1.1 17.60.1 100 mm inlet and 100 mm outlet 0.00

Cutting chases in brick masonry walls for

following diameter sand cast iron/centrifugally

cast (spun) iron pipes and making good the same

with cement concrete 1:3:6 ( 1 cement : 3 coarse

13.15 17.61 sand :6graded stone aggregate 12.5 mm nominal 0.00

size), including necessary plaster and pointing in

cement mortar 1:4 (1 cement : 4 coarse sand) :

Providing and fixing PTMT liquid soap container

109 mm wide, 125 mm high and 112 mm

distance from wall of standard shape with bracket

13.16 17.71 of the same materials with snap fittings of 125.00 Each 298.30 37288.00

approved quality and colour, weighing not less

Providing and fixing PTMT towel ring trapezoidal

shape 215 mm long, 200 mm wide with a

minimum distances of 37 mm from wall face with

13.17 17.72 concealed fittings arrangement of approved 57.00 Each 429.34 24472.00

quality and colour, weighing not less than 88

600 mm long towel rail with total length of 645

13.18 17.73.2 mm, width 78 mm and effective height of 88 mm, 57.00 Each 1120.37 63861.00

weighing not less than 190 gms.

Providing and fixing PTMT shelf 440 mm long,

124 mm width and 36 mm height of approved

13.19 17.74 quality and colour. Weighing not less than 300 75.00 Each 1208.42 90632.00

Total of the Sub-Head - Sanitary Installations : 3048694.00

Sub-Head:14: : Water Supply

Providing and fixing G.I. pipes complete with G.I.

14.1 18.10 fittings and clamps, i/c cutting and making good 0.00

the walls etc. : Internal work – Exposed on wall.

Providing and fixing G.I. pipes complete with G.I.

14.2 18.12 fittings including trenching and refilling etc. : 0.00

DSR-2018 Page 10 of 16

Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Making connection of G.I. distribution branch with

G.I. main of following sizes by providing and

14.3 18.13 fixing tee, including cutting and threading the 0.00

pipe etc. complete :

Providing and fixing gun metal gate valve with

C.I. wheel of approved quality (screwed end) :

Providing and fixing ball valve (brass) of

14.5 18.18 approved quality, High or low pressure, with 0.00

plastic floats complete :

Providing and fixing uplasticised PVC connection

pipe with brass unions :

Providing and fixing C.P. brass shower rose with

15 or 20 mm inlet :

Constructing masonry Chamber 30x30x50 cm

inside, in brick work in cement mortar 1:4 (1

cement :4 coarse sand) for stop cock, with C. I.

surface box 100x100 x75 mm (inside) with

hinged cover fixed in cement concrete slab 1:2:4

mix (1 cement :2 coarse sand : 4 graded stone

14.8 18.32 aggregate 20 mm nominal size), i/c necessary 0.00

excavation, foundation concrete 1:5:10 ( 1

cement :5 fine sand:10 graded stone aggregate

40mm nominal size ) and inside plastering with

cement mortar 1:3 (1 cement :3 coarse sand)

12mm thick finished with a floating coat of neat

cement complete as per standard design :

With common burnt clay F.P.S.(non modular)

bricks of class designation 7.5

Providing and fixing G.I. Union in G.I. pipe

14.9 18.46 including cutting and threading the pipe and 0.00

making long screws etc. complete (New work)

Providing and placing on terrace (at all floor

levels) polyethylene water storage tank, IS :

12701 marked, with cover and suitable locking

14.10 18.48 arrangement and making necessary holes for 40000.00 Litre 16.56 662400.00

inlet, outlet and overflow pipes but without fittings

and the base support for tank.

Providing and fixing C.P. brass bib cock of

approved quality conforming to IS:8931:

Providing and fixing C.P. brass long nose bib

14.12 18.50 cock of approved quality conforming to IS 0.00

standards and weighing not less than 810 gms.

Providing and fixing C.P. brass stop cock

14.13 18.52 (concealed) of standard design and of approved 0.00

make conforming to IS:8931.

Providing and fixing C.P. brass angle valve for

14.14 18.53 basin mixer and geyser points of approved 0.00

quality conforming to IS:8931 :

Providing and fixing PTMT grating of approved

quality and colour.

14.15.1 18.58.1 Circular type. 0.00

DSR-2018 Page 11 of 16

Description of Item Quantity Unit Rate (Rs) Amount(Rs)

14.15.1.1 18.58.1.2 125 mm nominal dia with 25 mm waste hole. 236.00 Each 96.42 22755.00

Total of the Sub-Head - Water Supply : 1202951.00

Sub-Head:15 : Drainage

Providing and laying non-pressure NP2 class

(light duty) R.C.C. pipes with collars jointed with

15.1 19.6 stiff mixture of cement mortar in the proportion of 0.00

1:2 (1 cement : 2 fine sand) including testing of

joints etc. complete :

Constructing brick masonry manhole in cement

mortar 1:4 ( 1 cement : 4 coarse sand ) with

R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5

coarse sand(zone-III) : 3 graded stone aggregate

20 mm nominal size), foundation concrete 1:4:8

mix (1 cement : 4 coarse sand (zone-III) : 8

graded stone aggregate 40 mm nominal size),

15.2 19.7 inside plastering 12 mm thick with cement mortar 0.00

1:3 (1 cement : 3 coarse sand) finished with

floating coat of neat cement and making channels

in cement concrete 1:2:4 (1cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal

size) finished with a floating coat of neat cement

complete as per standard design :

Inside size 90x80 cm and 45 cm deep including

C.I. cover with frame (light duty) 455x610 mm

15.2.1 19.7.1 internal dimensions, total weight of cover and 0.00

frame to be not less than 38 kg (weight of cover

23 kg and weight of frame 15 kg) :

With common burnt clay F.P.S. (non modular)

bricks of class designation 7.5

Inside size 120x90 cm and 90 cm deep including

C.I. cover with frame (medium duty) 500 mm

15.3 19.7.2 internal diameter, total weight of cover and frame 0.00

to be not less than 116 kg (weight of cover 58 kg

and weight of frame 58 kg) :

With common burnt clay F.P.S. (non modular)

bricks of class designation 7.5

15.4 19.8 Extra for depth for manholes 0.00

With common burnt clay F.P.S. (non modular)

bricks of class designation 7.5

With common burnt clay F.P.S. (non modular)

bricks of class designation 7.5

Providing M.S. foot rests including fixing in

manholes with 20x20x10 cm cement concrete

15.6 19.15 blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded 0.00

stone aggregate 20 mm nominal size) as per

standard design :

15.6.1 19.15.2 With 20 mm diameter round bar 75.00 Each 721.89 54142.00

Making soak pit 2.5 m diameter 3.0 metre deep

with 45 x 45 cm dry brick honey comb shaft with

15.7 19.32 bricks and S.W. drain pipe 100 mm diameter, 1.8 0.00

m long complete as per standard design.

With common burnt clay F.P.S. (non modular)

bricks of class designation 7.5

Total of the Sub-Head - Drainage : 3343218.00

SH: 16 : MR items

Supplying single bed of size 6" x 3" size with steel

16.1 MR frame and 12 mm thick ply top complete as per 238.00 Each 11370.26 2706122.00

approved design.

Supplying steel almirah size 1980 x 910 x 480

mm size with 4 shelves made up of 20 gauge

body and 18 gauge shutter with lock complete in

all respects as per approved design.

DSR-2018 Page 12 of 16

Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Wiring and Conducting

Ratres only ISI marked M.S. counuit, FR PVC

insulated cooper conductor single core cables,

moulded plate type swiches in passivated box

and FR PVC insulated earth wire have been

taken in the following items unless otherwise

specified and as per specification. wiring for Light

point/Fan point/Exhaust fan point/call bell point

with 1.5 sq.mm FR PVC insulated copper

conductor single core cable in surface/ recessed

17.1 1.10.2 medium PVC conduit, with moduler swith, 887.00 point 1,473.45 1306950.00

modouler plate, suitable GI box and earthing the

point with 1.5 Sq. mm FR PVC insulated copper

conductor single core cable etc. as recuired.

Wiring for light/power puug point with FR PVC

insulated copper conductor single core cable in

surface/recessed PVC conduit along with FR

PVC insulated copper conductor single core

cable for loop earthing as required.

Wiring for light/ power plug with 2X4 sq. mm

FRLS PVC insulated copper conductor single

core cable in surface/ recessed medium class

PVC conduit alongwith 1 No. 4 sq. mm FRLS

PVC insulated copper conductor single core

cable for loop earthing as required.

Wring for light/power plug point with 2 x 6 sq.mm

FR PVC insulated copper conductor single core

cable in surface/recessed steel condiut along

with 1 no. 6 sq. mm FR PVC insulated copper

conductor single cose cable for loop earthing as

Wiring for circuit/ summain wiring along with earth

wire with the following size of FRPVC insulated

17.3 1.14 copper conductor, single core cable in 0 0.00

surface/recessed medium class PVC conduit as

Supplying and fixing of following sizes Medium

class pVC conduit along with accessories in

surface/recessed inculding cutting wall and

making good the same

Supplying and fixing following modular switch/

socket on the existing modular plate & switch box

including connections but excluding modular

plate etc. as required.

Supply and fixing Following sizes GI boxes along

17.6 1.27 with modular base and cover plates for modular - 0.00

swithces in recess

DSR-2018 Page 13 of 16

Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Supplying and fixing suitable size GI box with

modular plate and cover in front of suitable or in

recss, including providing and fixing 3 pin 5/6

amps modulear socket outlet and 5/6 amps

modulear socket outlet and 5/6 amps modulear

switch, connection, painting etc. as recuired/ (For

light plugs to be used in non residential

Supplying and fixing suitable size GI box with

modular plate and cover in front of suitable or in

recss, including providing and fixing 6 pin 15/16

& 5/6 amps modulear socket outlet and 5/6 amps

modulear socket outlet and 15/16 amps modulear

switch, connection, painting etc. as required.

Supplying and fixing 20 Amps, 240 volts, SPN

industrial type , socket outlet, with 2 pole, and

eartgh, metal enclosed plug top along with 20

17.9 2.18 amps 2 pole ELCB in steel enclosure, on surface 52.00 metre 2,318.38 120556.00

on inrecess with chained metacover for the

socket out let and complete with connections,

teating and commissioneing etc. as required.

b) 20A, 3 pin socket outlet controlled by 20A 2P

Laying of following sizes of PVC

insulated PVC sheathed aluminium

conductor, armoured 1.1 KV grade in

ground including excavation, sand

cushioning brick protection covering and

refilling as per specification as required.

18.0.2 7.1.2 Above 35 sq. mm and upto 95 sq. mm 100.00 Metre 636.05 63605.00

18.0.3 7.1.3 Above 95 sq. mm and upto 185 sq. mm 15.00 Metre 662.39 9936.00

Supplying and making end termination with

compressor brass gland and crimping with

soldierless aluminium conductor cable of 1.1 KV

grade as required

ERRECTION OF FANS & LIGHT

Supplying and fixing of step type electric fan

regular in existing moduler plate switch box

including connection but excluding moduler plate

Installation, testing and commissioning of

prewired flourescent fitting/compact flourescent

fitting of all types complete with all accessories

with 3 x 1.5 sq.mm

FR PVC insulated copper conductor single core

cable and earthing as required.

installation, testing and commissioning of

prewired flourescent fitting/compact flourescent

fitting of all types complete with all accessories

and tube etc. including supplying and fixing ball

and socket arrangement, 2 nos. down rods of 20

mm dia x 1.6 mm thick steel conduit up to 30 cm

length, painting and wiring the down rod and

connections with 3 x 1.5 sqmm FRPVC insulated

copper conductor, single core cable and earthing

etc. as required.

DSR-2018 Page 14 of 16

Description of Item Quantity Unit Rate (Rs) Amount(Rs)

installation, testing and commissioning of ceiling

fns/bracket fan of all sizes including wiring the

down rod of standard length (upto 30 cm) with 3 x

18.5 1.44 1.5 sqmm FRPVC insulated copper conductor 286.00 each 321.79 92032.00

single core cable inclluding providing and fixing

phenolic laminated sheet cover on the fan box etc

installation of exhaust up to 450 mm sweep in the

existing opening, including making the hole to

18.6 1.50.1 suit the size of the above fan, making good the 51.00 each 683.09 34838.00

damage, connection, testing, commissioning etc.

Earthing with GI Earth plate 600 mm x 600 mm x

6 mm thick including accessories and providing

18.7 5.4 masonry enclosure with cover plate having 60.00 set 11,697.27 701836.00

locking arrangement and watering pipe etc. with

charcoal or coke and salt complete as required.

Supplying & laying 25 x 5 mm GI strip at .5mm

18.80 5.9 matre below ground as earth electrode including 650.00 metre 246.52 160238.00

soldering etc as required

Suppling and fixing following way three pole and

nature surface/recess mountingprewire, seheet

steel, MCB distribution board 415Volt, dust

protected and powder painted inclusive of

sweetable size tinned, copper, busbar, common

netrul, link, earth bar, din bar, for mounting MCB

datachable glame, knockout plate, and with built

in looose wire box, and superior make terminal,

connctions for all adequate size of affar PVC

insuleted copper conductor up to terminal inter

connections the phosphatized and powder

painted including earthing etc. as required with

double door as required but without

MCB/RCCB/isolated.

Supplwing and fixing of 6 to 32 amps rating 240

volt / C series Maniatue circuit breaker suitable

18.10 2.10 for ligting and other loads of following poles in the - 0.00

existing mcb db complete with connection with

testing and commissioning etc as required.

Supplying and fixing of following rating for 4 pole

( three phase neutral 415 voltreseadual current

circuit breaker RCCB) having a sensativity

current up to 30 mA in the existing MCB DB

complete with connection testing and

commissioning etc. as required.

Supplying and fixing circular / hexagonal MS

sheet ceiling fan box with clamp of internal dia

140 mm,73 mmheight, 3 mm thick rim top lid of

1.5 mm thick MS sheet lidss shall be screwed into

M/S box by means of 3 mm round headed

screws, clamps shall be made of 12 mm dia MS

bar bent to be shape as per standard drawing

with over all length as 80 cm

Supply and installation of following type LED

18.13 MR fixtures including all accessories Complete in all 0.00

respect (make bajaj, Philips or equivlant )

18.13.1 MR 36L watt LEDD bajaj make BZSSLL 36 L WH 70.00 each 8,786.00 615020.00

2x18 watt LED batten bajaj make BJI 218 LED

DSR-2018 Page 15 of 16

Description of Item Quantity Unit Rate (Rs) Amount(Rs)

1x18 watt LED batten bajaj make BJI 118 LED

18 watt LED Tube bajaj make BLRB 18 W LED

12 watt recess round downligher bajaj make

BPSLR 12W LED WH RD SD

Suppling and fixing of 1400M.M. sweep chiling

fan with 300/600/900m.m. standerd down road

and electrical connection as requred etc make

Bajaj New Bahar 1400 MM white CF

Supply and instalation of heavy duty type

exhaust fan of following size sweep with

18.15 MR gravety louvers sutters inculding all 0.00

acceessories / instalaton matterial requred

make ,bajaj, Philips, Usha or equivlant

450 mm sweep 900 rpm bajaj Make Supreme

Supplying of following sizes of PVC

insulated PVC sgeathed aluminium-XLPE

conductor armoured underground cable

1.1 KV grade etc. as required.

DSR-2018 Page 16 of 16