REPAIR AND MAINTENANCE OF WATER SUPPLY INSTALLATION INCLUDING LT PANEL, UG CABLE, DG SET, PUMP SET, STREET LIGHTS AT SANGLI, LODHI CAMP AND NEW ECHS POLYCLINIC AREA UNDER GE NEW DELHI

Amount

M&L for Cleaning of RCC under ground water Sump of capacity upto 50,000 gallons by wire brushing and bleaching the internal surface of sump with Bleaching powder, including removing all scales dust , pit dirt and mud, removing the sediments using pump to outside of defence land and carryout two coats of cement base paint on external exposed concrete/ plastered surface of under ground sump and endorsing date of cleaning on the outer wall of under ground sump with synthetic enamel paint with words not less than 50mm height complete all as specified and directed by Engineer-in-charge.

Material & Labour for cleaning of RCC water tanks (for Overhead reservoir of capacity 25,000 litres with 2m staging) by dewatering the complete tank, removing the sediments settled at the bottom of tank, scraping the walls and bottom of tank with wire brush and cleaning with bleaching powder solution, washing with clear water and applying one coat of white wash both internally and externally and writing the date of cleaning, due date of cleaning and capacity of tank in paint (white letters on black back ground) including removing of any vegetation growth on and around the tank complete all as specified and directed.

Material & Labour for cleaning of rotational moulded PVC water storage service tanks of 5000 litres capacity on buildings by dewatering complete tank, removing sediments setteld at the bottom of tank and scraping the walls and bottom of tank and cleaning with bleaching powder solution, washing with clear water and wiriting the date of cleaning and due date of cleaning in white paint complete all as directed. Note: PVC water tanks shall be cleaned in every 4 months

All as per Item No 3.00 here-in-before but for PVC water storage service tanks of 2000 litres capacity

All as per Item No 3.00 here-in-before but for PVC water storage service tanks of 1000 litres capacity

M&L for servicing including dismantling of water pumping set centrifugal type suitable for 25 HP capacity Electric motor, type DSM100/36, discharge 2475 LPM at 250 feet, and transporting to local workshop for necessary lathe work, metal filling, impellar servicing and taking back to site, refixing the same, including testing on completion to the entire satisfaction of Engr-in-Charge. NOTE : Spares and winding if required shall be measured & paid separately under relevant items.

M&L for rewinding 25 HP motor of centrifugal pump with super enamelled copper wire of existing gauge including greasing, varnishing, insulating paper of appropraite class, drying varnishing etc including base repairs if required including cleaning and re-fixing complete all as specified and directed .

M&L for servicing including dismantling of water pumping set centrifugal type suitable for 30 HP capacity Electric motor, pumping head 67 m, discharge 24 LPS, type DSM-3 ME and transporting to local workshop for necessary servicing as under and taking back to site, refixing the same, including testing on completion to the entire satisfaction of Engr -in -Charge. NOTE : Spares and winding if required shall be measured & paid separately under relevant items.

M&L for rewinding 30 HP motor of centrifugal pump with super enamelled copper wire of existing gauge including greasing, varnishing, insulating paper of appropraite class, drying varnishing etc including base repairs if required including cleaning and re-fixing complete all as specified and directed .

M& L for servicing including dismantling of water pumping set centrifugal type suitable for 15 HP capacity Electric motor, pumping head 67 m, discharge 24 LPS, type DSM-3 ME and transporting to local workshop for necessary servicing as under and taking back to site, refixing the same, including testing on completion to the entire satisfaction of Engr -in -Charge. NOTE : Spares and winding if required shall be measured & paid separately under relevant items.

M&L for rewinding 15 HP motor of centrifugal pump with super enamelled copper wire of existing gauge including greasing, varnishing, insulating paper of appropraite class, drying varnishing etc including base repairs if required including cleaning and re-fixing complete all as specified and directed .

M&L for taking out of tube well submersible pump set suitable for 5 HP cap of any make/model by lifting and lowering of pump set and column pipe including water proof joint of submersible cable and connections, by using tripod arrangement carefully and refixed complete to the entire satisfaction of Engr -in -Charge. NOTE : Spares/repairs required if any shall be measured and paid for separately under respective items.

Repairs to submersible electric motor upto 7.5 HP cap, carrying to workshop for repairs and rewinding with super enamelled copper wire of existing gauge including greasing, varnishing, insulating paper of appropriate class, drying varnishing etc and transporting back to site duly repaired including servicing and testing ,and refixed complete to the entire satisfaction of Engr -in -Charge. NOTE : Spares, if any, required to be replaced shall be measured and paid for separately under respective items.

Supply only Stainless Steel bearing

Supply only neck ring of existing size suitable for fixing in shaft assembly.

Supply only shaft assembly complete including lathe work.

Supply only locking bolt of heavy duty and superior quality.

Supply only Mild steel bolt of size (12mm dia 100mm long) with nut as per sample

M&L in replacement PVC flat sheathed copper conductor 3 core submersible cable of size 2.5 sqmm including taking out old unservicable one complete all as specified and directed.

Supply and Fix in replacement star delta starter fully automatic suitable for 30 HP motor 415V, AC

Supply and Fix in replacement star delta starter fully automatic suitable for 15 HP motor 415V, AC

M&L in replacement 100 mm dia sluice valve Cast Iron PN-1 with both ends flanged and drilled and fixed by means of nuts,bolts and including provision of rubber insertion complete all as directed at site .

M&L in replacement 80 mm dia sluice valve Cast Iron PN-1 with both ends flanged and drilled and fixed by means of nuts,bolts and including provision of rubber insertion complete all as specified and directed .

S&F in replacement water pressure gauge 0-10 kg per sqcm

M&L for painting sluice valve and NRV inside the pump house with two coats of synthetic enamel paint of approved paint Including preparation of old steel and iron surfaces of any description and girth, of size 80 mm.

M&L for painting sluice valve and NRV inside the pump house with two coats of synthetic enamel paint of approved tint Including preparation of old steel and iron surfaces of any description and girth, of size100 mm.

M&L for painting sluice valve and NRV inside the pump house with two coats of synthetic enamel paint of approved tint Including preparation of old steel and iron surfaces of any description and girth, of size 150 mm.

Supply and fix in replacement gland packing suitable for pump set of upto 30 HP wherever is required

Supply and fix in replacement 50 mm dia gate valve, gun metal, heavy duty, screwed down both ends, with iron wheel head including taking down old existing unserviceable gate valve complete all as specified and directed.

Supply and fix in replacement 40 mm dia gate valve, gun metal, heavy duty, screwed down both ends, with iron wheel head including taking down old existing unserviceable gate valve complete all as specified and directed.

Supply and fix in replacement 15 mm dia gate valve, gun metal, heavy duty, screwed down both ends, with iron wheel head including taking down old existing unserviceable gate valve complete all as specified and directed.

S&F in replacement GI pipe 25 mm bore medium grade including necessary fittings such as socket, tee, reducer, bend, elbow,nipple, union etc, laid in trenches or fixed on wall/roof complete all as specified and directed.

S&F in replacement GI pipe 40 mm bore medium grade including necessary fittings such as socket , tee, reducer, bend, elbow,nipple, union etc, laid in trenches or fixed on wall/roof complete all as specified and directed.

S&F in replacement GI pipe 50 mm bore medium grade including necessary fittings such as socket , tee, reducer, bend, elbow,nipple, union etc, laid in trenches or fixed on wall/roof complete all as specified and directed.

S&F in replacement GI pipe 80 mm bore medium grade including necessary fittings such as socket , tee, reducer, bend, elbow,nipple, union etc, laid in trenches or fixed on wall/roof complete all as specified and directed.

S&F in replacement GI pipe 100 mm bore medium grade including necessary fittings such as socket , tee, reducer, bend, elbow,nipple, union etc, laid in trenches or fixed on wall/roof complete all as specified and directed.

S&F in replacement Cast Iron pipe 80 mm bore medium grade including necessary fittings such as socket , tee, reducer, bend, elbow,nipple, union etc, laid in trenches or fixed on wall/roof complete all as specified and directed.

S&F in replacement Cast Iron pipe 100 mm bore medium grade including necessary fittings such as socket , tee, reducer, bend, elbow,nipple, union etc, laid in trenches or fixed on wall/roof complete all as specified and directed.

S&F in replacement GI union medium grade 50 mm dia.

S&F in replacement GI Socket medium grade 50 mm dia

S&F in replacement GI nipple medium grade 80 mm dia 4" long

S&F in replacement GI Tee medium grade 80 mm dia

Supply & fixing in replacement Cast iron non return Valve ( Reflex) with flanged ends, swing type design as per ISI marked of size 50 mm dia complete all as specified and directed.

Supply & fixing in replacement Cast iron non return Valve ( Reflex) with flanged ends , swing type design as per ISI marked of size 80 mm dia complete all as specified and directed.

Supply & fixing in replacement Cast iron non return Valve ( Reflux) with flanged ends , swing type design as per ISI marked of size 100 mm dia complete all as specified and directed.

Supply & fixing in replacement Cast iron foot valve, swing type design as per ISI marked of size 80 mm dia complete all as specified and directed.

Supply & fixing in replacement Cast iron foot valve, swing type design as per ISI marked of size 100 mm dia complete all as specified and directed.

Supply and fix in replacement 25mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe all as specified and directed by Engineer in Charge

Supply and fix in replacement 15mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe all as specified and directed by Engineer in Charge

Supply and fix in replacement 5000 ltr capacity PVC rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top threaded type) three layered, hoisted and fixed in position complete all as specified and directed.

Supply and fix in replacement 2000 ltr capacity PVC rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top threaded type) three layered, hoisted and fixed in position complete all as specified and directed.

Supply and fix in replacement 1000 ltr capacity PVC rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top threaded type) three layered, hoisted and fixed in position complete all as specified and directed.

Supply and filling calcium hypochlorite 65% to 70% chlorine content (in drum) in the form of granular and tablet form complete all as specified and directed.

M&L for painting with two coats of synthetic enamel paint of approved paint as per existing using spray gun including prepration of old steel and iron surfaces of any description and girth complete all as specified to Water supply pump with motor up to 30 HP capacity complete with base.

M&L in replacement for steel structure frame made out of size 75 cm X 50 cm with 10 mm thick MS channel as rectangular shape suitable for 15/25 HP motor for mounting on PCC base with the help of nuts-bolts including welding, drilling, PCC work, painting with synthetic enamel paints with two coats of smoke grey over a coat of red oxide primer complete all as directed.

S&F in replacement of digital voltmeter 0-500 volts

S&F in replacement of Amp Digital meter 0-100 amps with CT operated 100/5

S&F in replacement of ML 2 contactor, 3 phase 415 volts.

S&F in replacement of ML 3 contactor, 3 phase 415 volts.

S&F in replacement of ML 4 contactor, 3 phase 415 volts.

M&L for servicing of DG set 162.5 kVA capacity of Make: Cummins) by taking out unserviceable spares, cleaning by brushing to remove dust including cleaning of filter, checking of all nuts, bolts tightening wherever necessary, check up engine oil level, coolant level and labour for top up if necessary, adjustment belt tension, tuning of engine, adjustment of speed, alternator voltage, frequency etc, greasing, oiling and checking for smooth functioning of DG Set complete all as specified and directed. ( Note :- 1. Any spares, Engine oil, coolant, unserviceable spares required to be replaced shall be measured and paid for separately under respective items 2. Minor spares like nuts,bolts etc costing each up to Rs 300 shall be deemed to be included in the rate quoted above)

M&L for "B" check DG set 162.5 KVA of Make: cummins by taking out unserviceable spares, cleaning by brushing to remove dust including labour for changing engine oil, coolent to max level, adjustment belt tension,tuning of engine, adjustment of speed, alternator voltage, frequency, greasing, oiling and checking for smooth functioning of DG Set complete all as specified and directed. Note :- Any spares, Engine oil, coolant,unserviceable spares required to be replaced shall be measured and paid for separately under respective items

M&L for servicing of AMF Panel for 162.5 KVA Gen set complete including labour for replacement of unservicable spares, testing complete as all specified and directed. NOTE : Unserviceable spares required to be replaced shall be measured and paid for separately under respective items.

Supply only fan belt B-56, for DG set 162.5 KVA capacity

Supply only air cleaner for DG set 162.5 KVA capacity

Supply only Diesel Filter for DG set 162.5 KVA capacity

Supply only oil filter for DG set 162.5 KVA capacity

Supply only high pressure wire braided diesel pipe with benjo bolt 1m long for DG Set 162.5 KVA capacity

Supply only Kirloskar engine Oil 20W 40 for DG set 162.5 KVA capacity

Supply only battery charger 0 to 24 volts suitable for 24 volts with 180 AH battery complete all as specified

Supply only battery connecting lead from battery terminal to DG set 162.5 KVA capacity, of size 16 Sqmm with copper conductor complete.

Supply only radiator cap for DG set 162.5 KVA capacity

Supply only coolant ready mix

Supply only relay 240Volt, 11 pin with base for AMF panel

Supply only under voltage relay 415 VAC for AMF Panel

Supply and fixing battery charger 12 Volt DC fixed in AMF Panel complete all as specified

Supply only timer 230 V for DG set 162.5 KVA capacity.

M&L for servicing of radiator of DG set 162.5 KVA capacity of make Cummins, with chemical solution and opening drain plug, and drying radiator,then close the drain plug, fill up the coolant, cap screws, nuts, washers, rubber hose pipes, radiator pipe & elbow complete all as specified and directed. NOTE : Coolant for filling up the radiator shall be measured and paid separately under respective item.

M&L for servicing of Turbo Charger for DG set 162.5 KVA capacity complete including labour for replacement of unserviceable spares such as minor spares like nuts,bolts etc, (costing up to Rs 200 of spares each shall be deemed included in the rate quoted) and testing complete all as specified and directed.

S&F in replacement Heavy Duty Double Break Fuse Switches HRC Fuse type 100 Amp Specification: IS/IEC-60947-1 & 3, 415V AC, 50 Hz. in sheet metal enclosure with side handle operation and have front access left opening doors interlocked to prevent opening when the switch is in ON position complete all as specifed and directed. Make : Cat Part No IHHTSD0100 of Havells or equivalent Make of C&S/L&T or equivalent from approved list of makes.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in Soft/loose soil for laying underground LT cable, pipe, pole foundation etc all as specified and directed.

Returning and filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm thick each in soft/loose soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables complete all as specified and directed.

Supply & laying bricks, sub class 'B' burnt, old size, abutting each other with gap between adjacent brick not exceeding 10mm, laid flat perpendicular over UG cable for protection complete all as specified and directed.

Taking down of FIP with nozzles from DG Set including servicing, testing, commissioning of Fuel Injection Pump (FIP) of 162.5 kVA DG Set including plunzer, setting of valves with nozzles and refixing of the same complete with all accessories all as specified and directed by Engr-in-Charge

S&F in replacement aluminium lugs complete all as specified, suitbale for LT cable of sizes 50 Sqmm.

S&F in replacement aluminium lugs complete all as specified, suitbale for LT cable of sizes 70 Sqmm.

S&F in replacement aluminium lugs complete all as specified, suitbale for LT cable of sizes 120 Sqmm.

S&F in replacement aluminum lugs complete all as specified, suitbale for LT cable of sizes 240 Sqmm.

M&L for plate earthing for sub station equipments complete with galvanised mild steel plate electrode 60 cm x 60 cm x 6.0 mm thick buried directly in ground vertically (earth pit not less than 2.25 m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 mtr below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI earth strip 32 x 6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate at one end and connected to metallic bodies of HT/LT equipments etc at the other end, earth strip encased in and including 50mm bore GI light grade pipe with all fittings from top of electrode to body of equipment fixed with and including 25 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering GI pipe medium grade 20 mm bore complete with earth pit in PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate and 50 mm thick RCC cover 1:2:4 type B-1,reinforced with 8 mm dia TMT bars @ 100 mm centre to centre both ways all specified and shown in electrical plate No 3 of SSR Pt-I, including necessary excavation and earthwork, including test point and testing on completion. NOTE : Quoted rated shall be deemed to include main earthing lead/earth strip to test point upto 7.5 metre

S&F earth continuity conductor of size 32 x 6 mm GI strip, fixed on wall/buried in ground with and including fixing arrangements as walls like dash fastener, nuts, bolts, screws, washer etc complete all as specefied and as directed.

Supply & fixing in replacement bracket for fixing street/security light fitting, made out of GI pipe medium grade 40 mm bore,1.20mtr long bent to shape as required complete with MS flat iron 40x3 mm clamps, nuts, bolts washer of suitable size as per site requirement and fixed on pole/wall including two coats of aluminium paint over a coat of redoxide primer to MS clamps, nut bolts etc complete all as specified and directed by Engineer-in-Charge.

Disconnecting cable connection , for taking down unservicable street light/security light/Flood light/Garden light/Gate light of any type of any size rating including GI pipe bracket from the existing pole/wall and stacking at site for repair/replacement and refixed in position after necessary repair work all as directed by Engineer-in-Charge.

S&F LED street light luminare pressure dia cast aluminium housing with heat resistant toughened glass and IP 66 protection,of 120 Watt capacity along with LED bulb complete including making necessary electric connections. Make : CG Cat pt No. -LSTO-120 -CDL or equivalent Havells/Polycab/Philips or equivalent from approved list of makes.

S&F LED street light luminare pressure dia cast aluminium housing with heat resistant toughened glass and IP 66 protection,of 90 Watt capacity along with LED bulb complete including making necessary electric connections. Make : CG Cat pt No. -LSTO-90-CDL or equivalent Havells/Polycab/Philips or equivalent from approved list of makes.

S&F LED street light luminare pressure dia cast aluminium housing with heat resistant toughened glass and IP 66 protection,of 60 Watt capacity along with LED bulb complete including making necessary electric connections. Make : CG Cat pt No. -LSTO-60 -CDL or equivalent HavellsPolycab/Philips or equivalent from approved list of makes.

S&F service wire 1100 Volts PVC insulated with stranded copper conductor , served with inner sheathing of PVC tape and overall PVC Sheathed of size 2x4 sqmm twin core flat all as specified and directed.

S & F in replacement of MCCB 4 Pole .415 V. fixed type100 Amps with breaking capacity 16 KA complete all as specified and directed.

S&F in replacement of MCCB 4 Pole .415 V. fixed type125 amps with breaking capacity 25 KA complete all as specified and directed.

S & F in replacement of MCCB 3 Pole .415 V. fixed type 200 Amps with breaking capacity 25 KA complete all as specified and directed.

S & F in replacement of MCCB 3 Pole .415 V. fixed type 250 Amps with breaking capacity 25 KA complete all as specified and directed.

S & F in replacement of MCCB 4 Pole .415 V. fixed type 400 Amps with breaking capacity 35 KA complete all as specified and directed.

S&F factory made epoxy powder coated distribution baord TP&N 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, Earth bar and cable management, top and bottom removable gland plates with Knockout and suitable for one FP-MCCB 100 Amps as incomer and 12 SP MCBs or 4 TP MCBs (or any combination of SP/TP MCBs) outgoings complete all as specified and conforming to IS:8623 alongwith cable end box for above DBs Cat Part No 6079 13 for DB box of legrand or equivelent of L&T/ Hager /Schneider /Siemens or equivalent from approved list of makes.

S & F in replacement of kiosk box weather proof made out of PVC fire retardant non shock & rust proof one piece moulded SMC base and SMC cover with hinged door, pole mounting type comprising of aluminium busbar TPN of 63 amps with MCB SP 6 Amps of size 300x200x100mm fixed on pole with MS clamps 30x4mm with necessary nuts washer all as specifed and directed.

Dismantling and taking out old unserviceable post lamp fitting and Supply and fix integral LED LANDSCAPE LIGHTING ,90watts,Decorative Post top for 360° indirect light with IP 65 protection,Resistant to impact and corrosion, Glare-free and better uniformity with black painted MS pipe housing with all accessories complete with lamp all as specified and as directed Make-Crompton Cat No-MAPLE LPTO-90-CDL/M or equivalent from approved list of makes.

M&L for spray painting (including bringing compressor of suitable size at site) old painted steel or iron surface of KVA DG set complete with engine, alternator, radiator, exhaust hood and other satandard fittings & attachments (excluding diesel tank) as per existing colour scheme and pattern with atleast one coats of synthetic enameled paint after duly preparing the surface by cleaning with scrapers and emrey paper to the entire satisfaction of Engr-in-charge all as specified

S&F of inverter security light fitting 60W with alluminium pdc top maintanable clear toughfened glass suitable high efficient secoundery lence LM80 cerfied LED with 50000 hr @ L70 along with isolated electronic CC driver RTC enable with insulated copper wire covered with SS & MS zing plated and passivated.The light should be IP66 ingress protection and IK05 impact resistance li ion BIS certified battery of 3.7V 10W at battery operation ,back up will be 3-4 hrs, protection will be IP 20,overcharging ,deep discharging ,thermal compensation, marked with standard IS 10322,LM79 complete all as specified.

Dismantling and taking out/down LT cable of any size and of any description.

Supply and laying XLPE LT cable 1100 volts grade heavy duty with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC Tape armoured with galvanized steel strip or wire and overall PVC Sheathed stranded conductor conforming to IS-7098 (Part-I) with latest amendments laid in tranches/fixed to wall/pole/laid in floor including necessary connections and suitable size of thimbling complete all as specified and as directed by Engineer-in-Charge of following sizes :-

16 Sqmm 4 core.

25 sqmm 4 core

35 Sqmm 3.5 core.

50 sqmm 3.5 core

70 Sqmm 3.5 core.

95 Sqmm 3.5 core.

120 Sqmm 3.5 core.

150 sqmm 3.5 core

Supply and replacement of battery 12V 90AH maintenance free battery, 12 Volt initially charged with suitable size of copper leads and brass terminals complete as directed by Engr-in-charge.

M/S VEDHANT ASSOCIATES

SANJEEV ENTERPRISES

M/S ANIL KUMAR