SPECIAL REPAIRS TO BLDG NO T-440, CERTAIN REVENUE AND MINOR WORKS AT ZAKHAMA MILITARY STATION

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises,complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including similar pattern roof covering. ,complete all as specified and as directed.

M & L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for level course, ,complete all as specified and as directed.

M&L for non-skid coloured jointlfree ceramic tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles. ,complete all as specified and as directed.

M&L for screed bed or bedding layer or mortar 15 mm thick for laying floor finishes in CM (1:6), ,complete all as specified and as directed.

M&L for ceramic coloured printed tiles of size 300x200mmx6-7mm thick,skirting on verticals surfaces, set and jointed inneat cement slurry and pointed in coloured. ,complete all as specified and as directed.

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1 : 6 and finishing even and smooth without using extra cement. ,complete all as specified and as directed.

S&F 0.63mm thick plain galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zince coating 275 ,complete all as specified and as directed.

Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar. ,complete all as specified and as directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed with WPC @ 3 % by the weight of cement used and finishing even and smooth without using extra cement. ,complete all as specified and as directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 6 and finishing even and smooth without using extra cement. ,complete all as specified and as directed.

Supply only water proofing compound (ISI Marked), ,complete all as specified and as directed.

Demolition of cement concrete in ground floor / paving not exceeding 15Cm thick below or above GL unreinforced. ,complete all as specified and as directed.

M & L for 75 mm thick cement concrete (1:3:6) type C-2, (using 40mm graded stone aggregates) as in plinth protection finished fair and even. complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, unframed work in any position, complete all as specified and as directed.

M&L for wrought 2nd class hard-wood in scantling fixed. complete all as specified and as directed.

Taking down shutters of any description exc 1.00 Sqm and not exc 2 Sqm each complete all as specified and directed

Taking down Chowkatts or frames of any description exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) , complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grains printed PVC sheet reinforced with MS square tube and edges and painted to match with printed shet all as specified & drawing SSR Part-II 2010 complete all as specified and as directed

S & F Factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F2nd class hardwood 35mm thick panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of vennered particle board medium density, wood particle board with commercial face vineers complete all as specified and as directed..

S&F flush shutter 30mm thick solid core construction with block board core and ply wood face pannel on both sides complete all as specified and as directed.

S&F Butt hinges med weight cold rolled mild steel and fixed 100mm size. complete all as specified and as directed.

Ditto as per above but 75mm

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed. complete all as specified and as directed.

S&F floor door stopper of Aluminium alloy body and tongue with hard drawn steel spring overall length of cover plte 140 mm complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt of extruded section and fixed 150 mm long, complete all as specified and as directed.

Ditto as per above but 75mm

S&F extruded aluminium alloy handles, fabricated type, anodised 150mm size. complete all as specified and as directed.

Ditto as per above but 125mm

Hacking out old broken glass (any thickness) size quality or description from wooden frame metal frame with putty or fixed with beads. complete all as specified and as directed.

M & L for Sheet glass 3.0mm thick ordinary quality and glazing with oil putty in squares n. exc 0.5 Sqm in each pane, complete all as specified and as directed.

M & L for 2nd class soft wood (Kail) 20mm thick in facia boarding fixed with nails in any situation planed one side with butt joints, complete all as specified and as directed.

M&L Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /distrubed surfaces and fixed-in-repairs, complete all as specified and as directed.

S&F in repairs vitrous china squatting pan 'Orissa' pattern size 580x440 mm white, with integral foot rest (Excluding flushing cistern and flush pipe)

S&F PVC valveless, syphonic action type, flushing cistern of 10 liters capacity , low level, white, with inlet, ball valve, float and handle including brackets. complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin 550x 400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed Surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed.

S&F Brass Chromium plated Shower Rose 125mm size, with or without Swivel Joints, and fixing to Steel Pipe or Union and fixed-in-repairs, complete all as specified and as directed.

S&F PTMT Towel Rail 450mm long (mini-mum weight 170 Gram), fixed with and including Chromium plated Brass Screws and Wooden/Plastic Cleats and fixed-in-repairs, complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper Alloy, Fancy type, Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed.

S&F PTMT Grating Doom 125mm dia (minimum weight 40 Grams) and fixed-in-repairs, complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia), Cast Copper Alloy, Fancy type Chromium Plated with Crutch or Butterfly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed.

S&F brass Fancy type CP Stop cock with long shank and cup (concealed type) 15 mm dia bore screwed down with crutch handle both end screwed for iron pipe orunion as fixed in repairs, complete all as specified and as directed.

S&F PVC connection pipe 15mm dia, 450mm long with PTMT check nuts and washer on both ends complete all as specified.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 110 mm bore. complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 75 mm bore. complete all as specified and as directed.

S&F PVC (SWR) bends 75 mm dia with access door. complete all as specified and as directed.

S&F PVC (SWR) vent cowl bore of pipe 75 mm. complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

S&F GI tubing medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors bore of tube 20 mm. complete all as specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

S&F GI tubing medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors bore of tube 15 mm. complete all as specified and as directed.

M & L for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement , complete all as specified and as directed.

M & L for Preparation of new plaster surface of walls and applying two coats of oil bound distemper over a coat of priming surface chalk whitening, complete all as specified and as directed.

Demolition of brick work or stone/boulders built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and as directed.

S&FSteel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m meanradius built in cement mortor 1:6. complete all as specified and as directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4. complete all as specified and as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (40 mm graded aggregate ) in foundations, filling and mass concrete, complete all as specified and as directed.

M&L for Plain Cement Concrete 1:2:4 type B-0 using 12.5mm graded aggregate as copping. complete all as specified and as directed.

S&F Butt hinges med weight cold rolled mild steel and fixed 100mm size. complete all as specified and as directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed. complete all as specified and as directed.

S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

S & F stop valves 15mm bore dia, cast copper alloy ,screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs. complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome primer over surfaces of steel or iron of any description exc 10 cm width or girth including preperation of new or previously untreated surfaces. complete all as specified and as directed.

M&L for three coats of white wash on old plastered surfaces including prparation of surfaces complete all as specified and as directed.

M&L for two coats of cement base paint over a coat of primer including preparation of newly plastered surfaces complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation etc n.exc 10 sqm on plan andd n.exc 1.5 m in depth and getting out in hard/dense soil

M&L for RCC ( Nominal Mix)Type B1 1 : 2 : 4 (using 20mm graded stone aggregate) as in slabs supported on walls. complete all as specified and as directed.

use & waste for including wastage of formwork to soffits of suspended slabs not exceeding 200mm thick ( Horizontal or sloping). complete all as specified and as directed.

use & waste including wastage of formwork to edges of concrete flats exc 5 but not exc 10 cm wide. complete all as specified and as directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding witgh and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips. complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)of 1000 ltrs capacity hoisted and fixed in position in SSR Part-I . complete all as specified and as directed.

S&F ball brass valves high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed bore of pipe 20mm complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard/dense soil complete all as specified and as directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point, complete all as specified and as directed.

Taking down carefully point wiring copper/aluminum (light, fan, socket complete) including unserviceable battens or from existing casing capping/conceal conduit including earth continuity wire and fittings such as switches, socket, ceiling roses,lamp holder etc and making good disturbed surfaces of wall/ceiling etc complete all as directed by Engr-in-charge.

M&L for point wiring with single core PVC insulated unsheathed multistranded copper conductor FRLS cable of size 1.5 Sqmm nominal area 1100 volt grade drawn through and including PVC casing-capping/conduit of suitable size with all fittings and accessories including PVC board with cover of suitable size for housing/mounting the switches/socket etc including 1.5 Sqmm PVC insulated unsheathed single core copper conductor as earth continuty wire connected to common earth dolly for one light/exhaust fan point control by one switch.one way compleate all as specified and directed.

All as per item No 2 above but for 15 amp socket by using 2.5 sqmm copper cable with 2.5sqmm copper conductor as earth continuity.

All as per item No 2 above but for 3 pin, 5 Amp Socket on the same board.

All as per item No 2 above but for 3 pin,5 Amp Socket on independent board

S&F switch piano flush button single pole one way 5 Amp. complete all as specified and as directed.

S&F switch socket combination 2 in 1, 3 pin 05 Amp flush type universal complete all as specified and as directed.

S&F switch socket combination 5 Pin, 16 Amp flush type.

S&F ceiling rose surface back light 65 x 25mm, two to three terminal. complete all as specified and as directed.

M&L Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engineer in Charge.

S&F LED lamps 10W, LM 80 tested LED technology,Wide voltage range 150-300VAC complete as directed by Engr in Charge. Make -Wipro or eqvt make of philips, bajaj, Havells

Taking down old unserviceable light fitting of any type any rating complete all as directed by Engr-in-Charge.

S&F LED T/L 20 W, Fixture size (1150x25x40) mm (for 20 W), complete with batten and luminaries and as per the technical spevifications given below . Note:LED used shall conform to IS- 16103: 2012 &IS-16101:2012 should be of SMD type only. ii. LED efficiency shall be greater than 100 lumens per Watt/ max latest efficacy available. iii. Colour rendering index (CRI: Greater than or equal to 70). iv. Min efficiency of driver: 85%. v. Power factor of complete fitting: Greater than 0.95. vi. Input Operating Voltage: 140 V to 277V AC. vii. In-built high and low voltage cut-offs: 140 V Low and 277 (high). viii. Short circuit, Over load protection. ix. Housing of luminaries: Pressure die-cast aluminum LM6/ADC 12/LM 24housing

Taking down old unserviceable DB/Main switchs incl MCBs wooden block of any size and type and removing all as directed by Engr-in-Charge.

S&F PVC rectangular block of size 250x200x50mm depth complete all as specified and as directed.

S&F sheet metal enclosure for DB when MCB to be used 8 way 200 amp rated bus bar, SPN 240V, double door complete all as specified and directed..

S&F MCB Single pole and neutral 240 Volts, 6-32. Amps, 10 A,C-series,Make -havells, cat No.DHMGCSNF006-032 or same as equivalent.

S&F MCB Single pole 240 Volts, 6-32. Amps, 10 A,C-series,Make -havells, cat DHMGCSPF006-032 or same as equivalent.

S & F Air termination, single pointed, copper rod 12 mm dia and 600 mm long with multiple spikes on top. complete all as specified and as directed.

S & F Test point terminal block made of gun metal or phosphorous bronze size 75X75X25 mm, drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw complete all as specified and as directed.

S & F copper strip 23X3.15 mm with saddles and fixing screw etc, for eoof conductor and down conductor above ground. complete all as specified and as directed.

S & F ceramic insulator for fixing of copper strip with copper screw etc complete all as specified and as directed.

Earthing complete with copper earth plate electrode 60cmX60cmX3.15 mm buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge earth plate at a depth not less than 1.5 mtr below ground level, connected to copper strip of size 32 X 6 mm by means of nut, bolts, check nuts and washers made of galvanized iron or steel and connected to main switch board or main control board as direced and including concrete pit in PCC (1:3:6) type C1 pre-cast RCC cover slab 30cmX30cmX10cm with one handle for lifting made out of 8 mm dia MS bar, watering pipe 20 mm bore galvanized iron pipe (medium grade) with MS funnel for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in hard/dense soil complete all other accessories as shown on electrical plate No 5 of MES Sch Pt - I complete all as specified and directed

Rameshwar Prasad

M/S RAHUL TRADING CO.