AUGMENTATION OF DRAIN IN MD OR ACCN AT KR VIHAR (WEST) AND ADDN/ ALTN TO TOILET AND KITCHEN OF JCOs/ OR MD ACCN AT RATNUCHAK MIL STN UNDER GE KALUCHAK

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.

M&L cement concrete type C2 (1:3:6) 40mm graded aggregate) in foundation, filling and mass concrete complete all as specified and as directed.

Material and Labour for Brickwork with Fly Ash bricks having crushing strength not less than 75kg/Sqm straight or curved on plan exceeding 6m mean radius and built in CM (1:4) complete all as specified and as directed.

Material and Labour for Brickwork with Fly Ash bricks having crushing strength not less than 75kg/Sqm straight or curved on plan to any radius in half brick thick walls and built in CM (1:4) complete all as specified and as directed.

M&L for PCC 1:2:4 type C-1(using 20 mm graded crushed stone aggregate) as in kerbs or mud stops, rounded or chamfered on edges, in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, water troughs and like incl weathering, slightly rounded or chamfered aangles and throating all as spd & directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregates as in surface channels and drains complete all as specified and as directed by Engr-in-Charge.

Material and labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

Add or deduct for each 25 mm girth there of over or under 30 cm Ditto complete all as specified and directed.

Taking down cement plaster on brick/concrete or stone walls, ceiling, etc, including raking out joints, hacking for key, scrugbbing down with water etc, complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick/stone/ concrete surfaces in CM 1:4 and finished even and smooth without using extra cement, complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall or laid intrenches and connecting in to existing pipe complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed by the Engineer-in-charge.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed by the Engineer-in-charge.

M&L for providing precast RCC 1:2:4 Type B-1 as in cover slabs in drains etc set in cement mortar 1:6 incl formwork complete all as specified and directed.

M & L for mild steel TMT bars 8 - 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of cement concrete (unreinforced) in any position n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brick work or stone masonry, built in cement mortar incl all quoins, arches pillars etc all as specified & directed .

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Cutting chases, pinning in brick or concrete wall or surfaces of brick /concrete and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified.

Returning/filling in trenches in layer n'exc 15 cm thick including watering well ramming etc.complete all as specified & directed .

Removing excavated soil to distance n'exc 50 mtr and deposited as directed complete all as specified & directed.

Demolition of cement concrete in and paving (un reinforced) exc. 15 cm. thickness, below or above ground level, including removal of waste from defence land and dumping at a place as specified by civil authorities complete all as specified

Taking down chowkhats or frames ( without taking down shutters from the frame) not exceeding 1.5 Square Meter each and removing from site complete all as specified and directed.( The distrubed surface during taking down shall be made good by the contractor without any extra cost for fixing new one of any description. No extra cost is permissble for the material and labour for making good the disturbed surface)

Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.5 Square Meter but not exceeding 4 Square Meter each and removing from site complete all as specified and directed.( The distrubed surface during taking down shall be made good by the contractor without any extra cost for fixing new one of any description. No extra cost is permissible for the material and labour for making good the disturbed surface)

Taking up or down 15 mm bore steel tubing and connections including cleaning, threading for refixing or removal to store, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

M&L for sunken treatment with glass fiber reinforced modified cementitious coating system before the final coat of Latex Shield 2K (or equivalent) complete all as following :- Base Coat : Berger HS Latex plus (or equivalent) consumption base coat : 0.3 kg/m2 Reinforcement : Glass fiber Second and Third coat : Latex sheild 2K (or equivalent) Consumption top coat : 3 kg/m2 System reqquirements : density : 2.00 kg/ltr; Compressive strength: 0.5N/mm2 Wall penetration through the RCC slab must be sealed using Berger HS Repair (or equivalent). Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus (or equivalent) modified mortar with a bonding coat of Berger HS Latexplus (or equivalent) modified cement slurry upto sft. All depressions, unevenness, surface honeycombng shal be repaired using Berger HS Latex plus (or equivalent) modifiled polymer mortar with a bonding coat of Berger HS latex plus (or equivalent) modified cement slurry. Including cleaning of RCC surface to remove dust, loose paricles, etc with compressed air or any other suitable technique depending on site conditions, grinding aby sharp edges, etc. Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'CD' on page no. 111 of tender documents as per Sch 'A' Note No 19 Page No 17).

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with water proofing compound to be finished even and smooth without using extra cement complete all as specified and as directed (WPC to be measured & paid separately)

Supply only Integral water proofing compound liquid complete all as specified and directed.

M&L for hard core, of broken bricks broken to gauge n exc 63mm for laying sub base of compacted thickness 150mm complete all as specified and directed.

M&L Cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate) in foundations, filling and mass concrete in sub base

M & L for25 mm thick cement concrete type B-0, 1:2:4 (using 12.50 mm graded stone aggregate) as in levelling course of floor finishes, finished even and rough complete all as specified and directed.

M&L Non skid coloured glazed ceramic tiles of any shade and any pattern of sixe (Pattern consists combination of two or more tiles )300 x 300 x 7 to 8 mm thick, as in floors etc over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in colored cement to match coloured tiles complete all as specified and directed. (The Colour,shade and pattern shall be approved by the GE during execution work). (No extra cost is allowed for Removing and re-fixing and necessary cutting of door etc if any during execution of work)

M&L for Colored glazed ceramic tiles in vertical surfaces 450 x 300 x 7 mm thick set over and including 10 mm thick baking coat in CM 1:4 and jointed in neat cement slurry and pointed in white or colored cement to match complete all as specified and directed.

M&L 15-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and over and including 10 mm thick backing coat cement mortar (1 : 4) including pointing ,moulding the edges in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for cutting/drilling hole in Brick wall/RCC beam by mechanical mean exc 300mm deep in slab of WC/ Bath including supply & fixing 40mm dia 450mm long GI Spouts pipe all as directed by Engr in Charge

S&F pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,holdfast , etc., complete size of frame 105x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified and directed.

M&L PCC 1:3:6 (using 12.5 mm graded aggregate as mass concrete filling in hollow portion of the door frames complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood factory made glazed & skeleton shutters, open rebated & prepared to receive glass gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, section 8, clause 8.20 (a); complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruted section ISI marked complete all as specified and directed.

S&F Aluminium handles D type anodised 150 mm long ISI marked complete all as specified and directed.

S&F Stainless Steel Butt hinges, medium weight, 100mm long, complete all as specified & directed.

Supplying & laying CPVC pipes SDR 11 & plain CPVC SDR 11 fittings of 20 mm outer dia with all fittings like socket, union, elbow, bend, tees etc and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F PVC (SWR) floor trap , plain including jointing with solvent cement 75mm bore fixed in repairs complete all as specified and directed.

S&F PVC (SWR) pipes 110mm single socketed , in any length with rubber ring joints ,fixed to walls /floor complete including dismantling existing pipes of any description all as specified and directed.

S&F PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints fixed to walls /laid in floor/trenches complete including dismantling existing pipes all as specified and directed.

S&F PVC (SWR) bends with oval access door 110mm fixed in repairs complete all as specified and directed.

S&F PVC (SWR) bends with oval access door 75mm fixed in repairs complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm fixed in repairs complete all as specified and directed.

S&F PVC (SWR) juncton single (single T ) equal or un equal with access door 75 mm fixed in repairs complete all as specified and directed.

S&F PVC (SWR) juncton single (single T ) equal or un equal with access door 110mm fixed in repairs complete all as specified and directed.

S&F 75mm PVC (SWR) junction double, (double T) equal or unequal with access door complete all as specified and directed.

S&F Soap dish fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

S&F Tubular towel rail, 20mm dia D type 60cm long between flanges of brass chromium plated, complete all as specified and directed.

S&F in repairs Angle cock fancy type chromium plated with capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete, all as specified and directed.

S&F in repairs bib tap 15mm chromium plated fancy type cast cooper alloy with crutch or butter fly handle, screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repairs water closet vitreous china squatting pan ‘Orrisa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in lime concrete bedding (one lime, two sand or surkhi and 5 aggregate) minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes complete including making good floor complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (Pedestal pattern) and trap (excluding) fixing bolts,flushing cistern and flush pipe including connection to drain (or outgoing pipe) including plastic seat cover suitable for water closet pedestal pan, coloured closed pattern with flat bottom and cover and mid steel chromium plated or aluminium hinges devices with and including brass chromium plated standard quality jet with nozzle 1500 mm long PVC pipe etc complete all as specified and directed complete all as specified and directed.

S&F in repairs Vitreous china wash hand basin corner type, white , flat back, size 450X300 mm with brackets, including pillar tap and cutting for and pinning in ends of brackets or erecting stand ,32 mm waste coupling and waste pipe of 75 mm long complete all as specified and directed.

S&F fancy type Brass CP Wall mixer with L bend for mixing hot & cold water, screwed down high pressure, screwed both ends for 15mm bore for iron pipe or for unions & fixed complete all as specified & directed.

S&F in repairs PVC flushing cistern low level 10 ltr capacity with inlet ball valve, float valve and handle including brackets and pipe connecting to WC etc including all fittings and all as specified, including dismantling old flushing cistern any type complete all as specified and directed..

S&F PVC connection 45 cm long fitted with PTMT nut and washer on both ends, fixed to 15 mm bore iron pipes complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose, fancy type,125mm with swivel joints Including 300 mm long arm fixing to pipe or union fixed, complete all as specified and directed.

S&F Chromium plated grating 100mm dia complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 915mm x460 mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified and directed.

Labour for drilling holes with drill machine with electric driven for gas pipe etc not exc 25 mm dia Upto 10cm depth in marble stone etc complete all as specified and directed.

S&F of stainless steel plate rack of size 30x31x10 inch made out of AISI 304 stainless steel 0.63 mm thick having partitions as per sample kept in AGE office including brass/stainless steel screws for fixing of partitions, nuts, bolts, washers and fittings, complete all as specified & directed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed in, repair complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed..

S&F galvanised mild steel wire cloth 0.56 mm nominal dia or wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

M&L for applying one coats of synthetic enamelled paint on steel or iron old surface based materials of any description , not other wise described over 10 cm width or girth including preparation of old surfaces complete all as specified and directed..

M&L for preparing surface of new wood and wood based material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

15 mm thick rendering in CM 1:6 on other than fair faces of brick work & finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick using CM (1:3) on ceiling surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L for applying two coats of oil bound distemper including preparation of newly plastered ceiling surfaces including one coat of alkali resistant primer complete all as specified and directed..

M&L for prepartion of wall suraces and applying two coats of oil bound distemper over wall puty surface complete all as specified and directed.

Preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots, and applying one coat of oil bound distemper on ceiling complete all as specified and directed. Note : The work will be carried out upto triple storey buildings.

Preparation of old plastered or un plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots, and applying one coat of oil bound distemper on walls complete all as specified and directed. Note : The work will be carried out upto triple storey buildings.

E/M Portion

Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete all as specified and directed.

Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface complete all as specified and directed.

All as per item No 85 above but for one fan/Exhaust Fan point controlled by one piano switch all as specified and as directed.

All as per ser item No 85 hereinbefore but for one 3 pin socket outlet 5 Amp Same.

All as per Item no 85 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed.

Supply and fixing in of Switch piano flush type single pole, one way 5 Amp , complete all as specified and directed.

Supply and fixing of Socket outlet 3 pin, 5A, flush type complete all as specified and as directed.

Supply and fixing in of Switch socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts, complete all as specified and as directed.

Supply and fixing of Ceiling rose surface bakelite three terminals 240 volts complete, all as specified and directed.

Supply and fixing Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings , complete all as specified and directed.

S&F LED Bulb cool white 10 Watt Elegant design direct fit for easy installation all as specified and directed.

Supply and fixing of Tube light fitting integrated type suitable for LED 20W indoor decorative aluminium extruded LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as directed.complete all as specified and directed.

M&L for cutting of suitable size of holes for 300 mm exhaust fan in wall and grouting of nuts and bolts in wall and making good to match with existing walls complete all as specified and directed.

S & F 15 mm bore brass CP basin mixer for mixing hot and cold water screwed down for iron pipes and fixed in repairs complete all as specified and directed.

S & F fancy type Brass CP kitchen Sink wall mixer for mixing hot & cold water, screwed down high pressure, screwed both ends for 15mm bore for iron pipe or for unions & fixed complete all as specified & directed.

M & L for coloured, joint free non skid ceramic tiles 400 x 400 x 7 to 8 mm thick in floors load over and including 15 mm thick screeed bed or bedding layer of cement mortar 1:4 set and jointed in neat cement to match the colour of tiles complete, all as specified and directed.

M & L for coloured glazed ceramic tiles 400 x 400 x 7 to 8 mm thick on vertical surfaces of walls including 10 mm thick backing coat of cement mortar 1:4 as om dadp. Skirting, riser, of steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

AKSHAY CONSTRUCTION COMPANY (BID ID -3465306)

GENESIS INDIA (BID ID -3460182)

NARESH KUMAR AND COMPANY (BID ID -3466086)

M/S ARUN ANAND (BID ID -3460292)

KAMAL CONSTRUCTION (BID ID -3465894)

M/S Shiv Enterprises (BID ID -3460154)

Ghuman Builders (BID ID -3460712)

M/S TRIKUTA BUILDERS (BID ID -3466099)