SPECIAL REPAIRS TO INTERNAL ROADS (JAYANTH PARK) AT MINNIEBAY AREA UNDER GE MINNIEBAY

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sq m and Exc 50 mm and n exc 100 mm deep

M&L 7.5 cm thick (Compacted thickness) WBM with coarse aggregate granite, trap, basalt of grading 2 (63 to 40mm) spread rolled and consolidated to gradient materials and camber as reqd

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.

Preparing unsurfaces surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.

M & L for applying evenly a priming/ tack coat with bituminous primer using paving bitumen of any penetration at 5 Kg. Per 10 Sq. Metres.

M & L for applying evenly a priming/ tack coat with bituminous primer using paving bitumen of any penetration @ 10Kg/10 Sqm

M & L for bituminous premix asphaltic semi dense concrete 40mm consolidated thickness with 4.5% binder content by weight of total mix, rolled and compacted with power road roller 8 to 12 TON capacity to required camber and gradient complete.

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous primer @ 5 kg per 10 sq m, putting in premix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cu m of sand), again well rammed (including supply of premix binder and sand) depth of potholes n exc 30 mm

M & L for premix bituminous macadam laid/ rolled and compacted to required gradient and camber (consolidate thickness not more than 75 mm) using paving bitumen of any penetration as binder 4% by weight of total mix.

M & L for Road Marking Strips, Lines, Dashes, Arrows, Letters etc of 2.5 mm thick [Reflective Type] of colour White or Golden Yellow on roads, pavements and the like exceeding 10cm wide with Hot Thermo Plast material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surface including cleaning the road surface of all dirt, scales, oil grease and foreign materials etc complete all as specified and as directed.

Supply and fixing solar cat eyes of size 125x125x25mm with shank of 56.8mm. Water proof, energy saving and ecofriendly DHRUV solar road stud made out of solid aluminium alloy shell powered by solar cells and panels. Technical specification s: 1. Aluminium-alloy shell. 2. Solar panel- Mono crystalline solar 2.4V/0.3Watt. 3.One Ni-Mh or Ni-Cd rechargable battery. 4 . Six super bright LEDs, Make: Dark Eye Solar Stud (DHRUV) all as specified and manufacturers instruction.

Supply and fix pre-cast concrete blocks for kerb stone with solid block exc 10 cm in width type C-1 , 1:3:6 ( using 20 mm graded stone aggregate) set in CM 1:6 of any shape and size as approved by Garrison Engineer, including necessary excation and earth work including returning filling in the erarth and removal of surplus earth from site if any, kerb stone shall be fixed in true line and level or in curves for edging of road side path including embedding PCC pre cast block in ground to any depths as required and tamping soil around PCC bloacks complete .

M&L Rendering 15mm thick in two coats i.e 10 mm thick under coat in cement mortar 1:6 and 5mm thick finishing coat in CM 1:4 (with river sand) finished even and smooth complete all as specified

M & L for Preparation of Newly plastered surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of primer.

M/s Sriya Enterprises

M/s K Moorthi