REPAIR TO FLOOR AND WALL TILLING, PLASTER, PLINTH PROTECTION, FALSE CEILING, JOINERY AND SANITARY FITTINGS AND REPAIR, MAINT OF INTERNAL ELECTRIFICATION INLCUDING MCB, DBS BLDG STREET LIGHTS AND CONNECTED WORKS UNDER GE (EAST) MATHURA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified.

M&L for light shade double charged coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified.

M&L for Glazed ceramic tiles on vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick backing coat of cement mortar in 1:3 complete all as specified.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles

M&L Brickwork with fly ash (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6.

Taking down cement or cement lime plaster on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water, etc.

M&L for rendering 10 mm thick on ceiling surfaces in cement mortar 1:3 finished even & fair all as specified and directed.

M&L rendering 15mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound hydroseal-W+ or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by GE.

M&L for rendering 15 mm thick on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in CM 1:6 complete.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparing newly plastered surface of wall and applying three coats of white wash complete.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved.

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed

Taking up or down 20 mm bore steel tubing and connections, complete all as specified and as directed

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified.

Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

S&F in repair bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes 15 mm bore complete.

S&F in repair angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes 15 mm bore complete.

S&F in repairs stop valve, 15 mm chromium plated with long shank and cup (Concealed type) both ends for iron pipe

S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm including bracket and pair of rack bolts waste coupling pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75 mm dia PVC floor trap plain with grating including jointing with solvent cement complete all as specified.

M&L for 150mmx 150mm Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' and setting and jointing in cement mortar 1:1complete all as specified in repairs.

S&F in repair 110 mm dia PVC (SWR) bends any radius with oval access door complete all as specified.

S&F in repair 75 mm dia PVC (SWR) bends any radius complete all as specified.

S&F in repair 110 mm dia PVC(SWR) plain bends any radius complete all as specified and directed.

S&F in repair PVC (SWR) junction single T bore 110 mm complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) pipes type 'A' single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F in repair PVC (SWR) 110 mm dia pipes type 'A' single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F in repair Pillar Cock with extended Lever Handle for Medical use complete fixed to wash basin/sink all as specified and directed. Make:-Jaquar Cat No. FLR-5031N or equivalent of makes as specified in the list of makes.

S&F in repair Single Lever Surgical purpose Elbow action Basin Mixer with extended operating Lever with 150 mm long Braided hoses Make:-Jaquar Cat No.FLR-5033B or equivalent of makes as specified in the list of makes.

S&F in repair Toilet Roll Holder fixing to wall complete all as specified. Make:-Jaquar Cat No.ACN-1151N or equivalent of makes as specified in the list of makes.

S&F in repairs 15 mm dia brass chromium plated pillar tap long shank with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long screwed shank complete.

S&F in repairs PVC flexible waste pipe 32 mm dia for fixing in urinals and wash basin complete.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F in repairs corner racks with glass of size 300x300mm, 8mm thick bevelled on edges with two brackets CP all as specified.

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms)

S&F Shower arm 15 mm size, with flange fixed to wall complete all as specified.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connection complete.

S&F in repairs PVC Jet for EWC complete set as directed .

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging devices complete all as specified.

S&F in repairs Viterous china squatting pan, Órissa' pattern, size 580 x 440mm white, with integral foot rests including connection and fitting to trap, and to flushing pipe complete and making good to wall or floor tilling to match the existing complete all as specified.

S&F in repairs vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete.

S&F in repairs 15 mm size two way angle cock cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete.

S&F in repairs Health faucet of superior quality ABS body 1.2 m long flexible tube and wall hook including fixing complete all as specified and as directed.

S&F in repairs waste coupling of 32 mm size chromium plated for glazed ware sink basins, etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed.

S&F in repairs waste coupling of 40 mm size brass chromium plated for sink etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed.

S&F in repairs 450 mm long PVC connections 15 mm size with PTMT nuts at both end complete.

S&F in repairs towel rail 600 mm long 20 mm dia fixed with steel screw etc complete all as specified.

S&F in repairs stainless soap dish fixed to wall complete all as specified and directed.

S&F in repairs 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 g ms) complete.

S&F in repairs cover for HDPE water tank of capacity 500/1000 ltrs rotating type including frame including nut bolt complete.

Supply and fix in repair 500 litres capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.

Supply and fix in repair 1000 litres capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.

Cleaning of HDPE tank of capacity up to & including 500 Litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing complete all as directed.

All as per item No 60. above but capacity of tank exc 500 litres but not exc. 1000 litres

S&F in repair 20 mm dia Gun metal, globe or gate valves with iron wheel head, including making thread to both ends of pipes for fixing, screwed both ends for iron pipes and fixed.

S&F in repair stainless steel kitchen plate rack of size 775x750x250mm deep, fabricated with 0.63 mm sheet fixed in position on wall complete. Make:- Prayag cat No P-346 or equivalent of make specified in Appx 'B'

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness below or above ground level unreinforced.

M&L for 50 mm thick plain cement concrete M-10 grade (Nominal mix) using 20 mm graded stone aggregate as in plinth protection surfaces finished even and smooth without using extra cement including filling the joints by bitumen and sand mixed in the ratio 1:4 by weight complete all as directed.

Dismantling wall and ceiling boards (fibre) any thickness including cover fillets/frame work.

Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications and as directed by Engineer-in-charge.

M&L for 4 mm thick designer non-asbestos fibre cement building board having fire resistance & moisture resistance properly. Make :- Everest, fixed on aluminium grid with screws complete all as specified and directed.

S&F 18 mm thick PVC Celuka Ply Plain White color both side fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the Engineer - in -charge. (Density- 575 to 600 Kg/Cum) Make- Rajshri Plastiwood or equivalent make given under list of makes.

S&F 18 mm thick Celuka ply of Single Side Prelam/ Rigidlam color fixed with screws, solvent cement/ adhesive to make kitchen cabinet front sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the Engineer - in -charge. (Density- 575 to 600 Kg/Cum) Make- Rajshri Plastiwood or equivalent make given under list of makes.

S&F 12 mm thick Celuka ply of plain white(Matt finish) color fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per specifications and as directed by the engineer - in –charge- ( Density- 575 to 625 KG/Cum) Make- Rajshri Plastiwood or equivalent make given under list of makes.

S&F stainless steel handles 100 mm size for kitchen cabinet shutters Make :- KAFF, Godrej & Hettich

S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised

M&L for 100 mm thick cement concrete type M-7.5 grade (Nominal mix) using 40mm graded stone aggregate as in sub base

M&L for sand filling under floors and consolidation as required for laying paver blocks.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and no pigments any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering with self tapping screws complete.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in cladding to wall with self tapping screws complete.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe-410-W.

S&F 2mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with J or L hook and washer in roof, wall etc.

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) area n.exc. 1.50 Sqm each and making good the disturbed surface complete all as specified.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.50 Sqm and n.exc 4.00 Sqm each and making good the disturbed surface complete all as specified.

S&F 105x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

S&F 125x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

M&L cement concrete M-10 grade (Nominal mix) using 20mm graded stone aggregate as in bed blocks for fixing hold fasts and fillling of chowkhats etc. all as specified.

M&L for applying two coats of synthetic enamel paint on primed steel surface of any description over 10 cm width or girth complete all as specified.

S&F 35 mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges offraming plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

Supply & Fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

S&F 35 mm thick flush door shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforcement with MS square tube supplying and fixing in opening as per specification & sketch shown in sketch 8 of SSR part II.

All as per item No. 93.00 above but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck indie with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fittied in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, with Particle board core, supplying & fixing in the frame at site as per specification & sketch shown in section 8 of SSR part II.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F 100mm long hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F 200 mm size aluminium anodized barrel tower bolts of extruded section and fixed.

S&F 150 mm long aluminium anodised handle fabricated type all as specified and as directed by Engineer-In-Charge.

S&F powder coated (Power coating shall not be less than 50 micron with approved colour) Aluminium frame for doors windows, ventilators partition with one or more rebates including joining cleat for fixing etc. complete all as specified

M&L for powder coated (Power coating shall not be less than 50 micron with approved colour) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, including handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

M&L for powder coated (Power coating shall not be less than 50 micron with approved colour) aluminium window shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F 5 mm Sheet glass,ordinary quality and glazing in square n exc 0.5 sq. m in each pane

S&F 5 mm Sheet glass,ordinary quality and glazing in square exc 0.5 sq. m in each pane

S&F 12 mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed to aluminium shutters complete all as specified.

Taking down existing unserviceable tube light fittings/ bulkhead fitting/ building street light fitting/ ceiling fittings of any type / make from wall/ ceiling etc all as directed.

Supply and fixing Integrated type LED tube light fitting, indoor decorative aluminum extruded T-5, 2 ft white complete of capacity 1x10 Watt. Make :- Cat Part No LTTB2F10WLEDEW in C&S or equivalent in Philips/Crompton/Osram.

Supply and fixing Integrated type LED tube light fitting, indoor decorative aluminum extruded T-5, 4 ft white complete of capacity 1x20 Watt. Make :- Cat Part No LTTB4F20WLED/W in C&S or equivalent in Philips/Osram.

Supply and fixing Integrated type LED tube light fitting, indoor decorative PC housing extruded T-5, 4 ft white complete of capacity 1x20 Watt. Make :- Cat Part No LTTB4F20WLEDEW in C&S or equivalent in Philips/Osram.

Supply and fixing Building street light fitting, IP66 powder coated pressure die cast aluminium with heat resistant toughened glass complete of 20 Watt capacity. Make:- Cat part No LTESSI20WLED in C&S or equivalent in Philips/Osram.

Supply and fixing Building street light fitting, IP66 powder coated pressure die cast aluminium with heat resistant toughened glass complete of 25 Watt capacity. Make :- Cat part No LTESSI25WLED in C&S or equivalent in Philips/Osram.

Supply and fixing LED Bulk Head with PDC aluminium housing and milky diffuser capacity 10 Watt. Make:- Cat part No LTB10WLED in C&S or equivalent in Philips/Osram.

Supply and fixing LED Bulk Head with PDC aluminium housing and milky diffuser capacity 12 Watt. Make :- Cat part No LTB12WLED in C&S or equivalent in Philips/Osram.

Supply and fixing LED Bulk Head with PDC aluminium housing and milky diffuser capacity 20 Watt. Make :- Cat part No LTB20WLED in C&S or equivalent in Philips/Osram.

Supply and fixing Aesthetically designed 2'x2' LED recess mounting extruded aluminum housing Flat panel, soft-light and glare free symmetrical illumination of capacity 30 Watts. Make:-C&S Cat part No LTCRP30WLED2X2 or equivalent make in Philips, Crompton.

Supply and fixing Aesthetically designed 2'x2' LED recess mounting extruded aluminum housing Flat panel, soft-light and glare free symmetrical illumination of capacity 45 Watts. Make :- C&S Cat part No LTCRP45WLED2X2 or equivalent make in Philips, Crompton.

Supply and fixing LED round recess, aluminum housing slim down light fitting of capacity 09 Watts. Make:-C&S Cat part No LTCRSLM9HPLEDRND/W or equivalent make in Philips, Crompton.

Supply and fixing LED round recess, aluminum housing slim down light fitting of capacity 12 Watts. Make:-C&S Cat part No LTCRSLM12PLEDRND/W or equivalent make in Philips, Crompton.

Supply and fixing LED round recess, aluminum housing slim down light fitting of capacity 15 Watts. Make:-C&S Cat part No LTCRSLM15PLEDRND/W or equivalent make in Philips, Crompton.

Taking down unserviceable MCB distribution boards with incoming and outgoing controls any make and capacity after disconnecting of electric connections complete all as directed.

Supply & fixing powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted for 240 volts, single pole and neutral 4 way with 100 Amps rated copper bus bar, type complete all as directed.

Supply & fixing powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted for 240 volts, single pole and neutral 8 way with 100 Amps rated copper bus bar, type complete all as directed.

Supply & fixing powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted for 240 volts, single pole and neutral 12 way with 100 Amps rated copper bus bar, type complete all as directed.

Supply & fixing powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted, triple pole and neutral 4 way with 100 Amps rated copper bus bar, type complete all as directed.

Taking down unserviceable MCBs of any make and capacity after disconnecting of electric connections complete all as directed.

Supply & fixing MCB triple pole and neutral 240 volts, C series of capacity 63 Amps of breaking capacity 10 KA including connections with copper lugs of suitable size in MCB DBs all as directed.

Supply & fixing MCB Single pole and neutral 240 volts, C series of capacity 32 Amps of breaking capacity 10 KA including connections with copper lugs of suitable size in MCB DBs all as directed.

Supply & fixing MCB Single pole 240 volts, C series of capacity 6 to 20 Amps of breaking capacity 10 KA including connections with copper lugs of suitable size in MCB DBs all as directed.

Disconnecting electric connection and taking down old unserviceable electric meter from existing location and depositing MES store yard.

Supply and fix microprocessor based single phase electronic tamper proof energy meter of rating 10 to 60 amp with optical communication port, conforming to IS 13779. Make:- Secure or equivalent

Supply and fix microprocessor based AC three phase static energy meter of accuracy class 1.0, 3x240V, 50 Hz with optical port and with backlit LCD display of rating 20 to 100 amp. Make:- Secure or equivalent.

Supply and fixing in replacement ceiling fan AC 230Volt single phase five star rating and fixing accessories complete of 1200 mm sweep all as directed.

Supply and fixing in replacement wall mounted fan AC 230Volt single phase five star rating and fixing accessories complete of 300 mm sweep all as directed.

Supply and fixing in replacement exhaust fan, plastic body AC 230 Volt single phase incl fixing accessories complete of 250 mm sweep all as directed.

Supply and fixing in replacement exhaust fan, plastic body AC 230 Volt single phase incl fixing accessories complete of 300 mm sweep all as directed.

Taking out old unserviceable/burnt LT UG cable of any size including and making good to the disturbed surfaces and removing the material from site complete all as directed.

Excavating in trenches for laying under ground cable, erection of poles and stays not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out in any type of soil complete all as specified and directed by Engr–in–charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr in charge.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

M&L for sand cushioning to under ground cable in trenches in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. Note:- Measurement shall be taken after gentling puning of sand.

Supplying and laying un-reinforced precast concrete cable cover class LV type 1 with peak size 250 mm x 150 mm x 40 mm complete all as directed.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches / pipes, fixed to poles / walls, fixing with suitable saddle/clamps complete all as directed including taking out the old burnt out cables all as directed of size 16 sqmm 4 core.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches / pipes, fixed to poles / walls, fixing with suitable saddle/clamps complete all as directed including taking out the old burnt out cables all as directed of size 16 sqmm 2 core.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches / pipes, fixed to poles / walls, fixing with suitable saddle/clamps complete all as directed including taking out the old burnt out cables all as directed of size 10 sqmm 4 core.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches / pipes, fixed to poles / walls, fixing with suitable saddle/clamps complete all as directed including taking out the old burnt out cables all as directed of size 10 sqmm 2 core.

Taking down old unserviceable/burnt sub main wiring of any size including earth wire and making good to the disturbed surfaces and removing the material from site complete all as directed.

Material and labour for submain wiring along with earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawn in and including concealed rigid non metallic PVC conduit medium grade, ISI marked ivory colour alongwith accessorirs of size 2x6 Sqmm + 1x6 Sqmm (earth) in 25 mm dia PVC conduit all as directed. Note :- Two run of 6sqmm, one run of 6sqmm earthwire and PVC conduit of 25mm dia shall be measured as one unit length.

Supply and fixing in replacement LED bollard with opal diffuser and aluminum reflector capacity 09 watt including fixing/ grouting on PCC platform of suitable size and taking down existing unserviceable one complete all as directed at site. Make : C&S Cat Part No.LTGLC9WLED or equivalent in PHILIPS/Crompton.

Supply and fixing in replacement decorative LED Post top lantern luminaires with diffuser and painted spun aluminum deflector of capacity 30 watt including fixing arrangement including taking down existing unserviceable one complete all as directed at site. Make : C&S Cat Part No.LTGLC30WHPLED/W or equivalent in PHILIPS/Crompton.

Supply and fixing in replacemnt sheet moulding compound junction box shock and rust proof, termite resistant, tamper proof single phase, two wire rating of size 250 mm x 200 mm x 105 mm complete with one no. MCB SP 6 Amp including non metallic clamps and GI nut bolts and washers of suitable size and fixed on pole /wall complete. Make - Sintex Cat part No GSJB 2520 or equivalent in Hensel/ABB.

GANGA CONSTRUCTION

Shakashi Construction Co.