Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.1 LAccepted-AOC 10 RAMTEKDI ROAD PUNE 411 013 | PUNE | PUNE | MAHARASHTRA | 411013 | ₹14.1 L Quoted ₹14.3 L | L1 | Accepted-AOC ACCEPTED BEING L1 |
| 2 | L2₹25.7 L+₹11.4 L (79.4%)Rejected-AOC BLOCK NO 2 FLAT NO 17 FIRST FLOOR KENDRIYA VIHAR PARUTHIPATTU AVADI CHENNAI 600 071 | CHENNAI | CHENNAI | TAMIL NADU | 600071 | ₹25.7 L+₹11.4 L (79.4%) | L2 | Rejected-AOC REJECTED DUE TO NOT BEING L1 |
| 3 | L3₹26.3 L+₹11.9 L (83.3%)Rejected-AOC | ₹26.3 L+₹11.9 L (83.3%) | L3 | Rejected-AOC REJECTED DUE TO NOT BEING L1 |
| 4 | L4₹26.8 L+₹12.4 L (86.7%)Rejected-AOC NO 16 1 SATTANNA NAICKEN STREET CHOOLAI CHENNAI 600 112 | CHENNAI | CHENNAI | TAMIL NADU | 600112 | ₹26.8 L+₹12.4 L (86.7%) | L4 | Rejected-AOC REJECTED DUE TO NOT BEING L1 |
| 5 | L5₹27.1 L+₹12.7 L (88.9%)Rejected-AOC | ₹27.1 L+₹12.7 L (88.9%) | L5 | Rejected-AOC REJECTED DUE TO NOT BEING L1 |
| Sl No | Description | Qty | Unit | SHANMUGA TRADERS L2 | PRIYADARSHINI CONSTRUCTIONS L9 | SUSII CONSTRUCTIONS L3 | Mahesh Traders L7 | SRI CHAKRA CABINETS L4 | KASTURILAL HARICHAND OHRI AND SONS L1 | SKR ENTERPRISES L8 | SHRI S SANTHAKUMAR L6 | M.G.Swamy.Co., L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00CHAIR VARANDAH Drg No :FD 256 | ||||||||||||
| 1.01 | Removing of old unserviceable cane from Chair varandah, cleaning tubular surface and apply two coat of synthetic enamel white paint over a coat of red oxide and re canning with 4mm wide new plastic cane as per mat pattern,broken joints has to be welded and fix new rubber shoes for all the four legs as per drawing completely all as specified and as directed by the Engineer-in-Charge. Make of Cane : National Cane/Swastik/Shah | 450 | Each | 1,300 ₹5,85,000 | 600 ₹2,70,000 | 1,500 ₹6,75,000 | 700 ₹3,15,000 | 1,450 ₹6,52,500 | 500 ₹2,25,000 Lowest | 1,600 ₹7,20,000 | 1,700 ₹7,65,000 | 1,500 ₹6,75,000 |
| 1.02 | Removing existing unserviceable/rusted bottom of legs(100 to 150 mm length) from chair verandah and supplying and fixing with new MS tube 12 mm dia 1.8mm thick (100 to 150mm length) duly welded and finished including two coats of synthetic enamel white paint over a coat of primer completely all as specified and as directed by Engr-in-Charge. | 200 | Each | 150 ₹30,000 | 250 ₹50,000 | 150 ₹30,000 | 250 ₹50,000 | 150 ₹30,000 | 120 ₹24,000 | 100 ₹20,000 Lowest | 156 ₹31,200 | 150 ₹30,000 |
| 2.00CHAIR CBA STEEL WITH OUT ARMS Drg No:FD- 75(M) | ||||||||||||
| 2.01 | Removing of existing damaged cane from seat of steel chair without arms and re-canning with new plastic cane half round of size 2mm width and 4 mm for border strands only as per Godrej pattern as per drawing complete all as specified and as directed by Engr-in-Charge. Make :National Cane/Swastik/Shah | 40 | Each | 250 ₹10,000 | 600 ₹24,000 | 250 ₹10,000 | 750 ₹30,000 | 300 ₹12,000 | 200 ₹8,000 Lowest | 280 ₹11,200 | 255 ₹10,200 | 250 ₹10,000 |
| 2.02 | Removing of existing damaged cane from back of steel chair without arms and re-canning with new plastic cane half round of size 2mm width and 4 mm for border strands only as per Godrej pattern as per drawing complete all as specified and as directed by Engr-in-Charge. Make :National Cane/Swastik/Shah | 40 | Each | 250 ₹10,000 | 600 ₹24,000 | 250 ₹10,000 | 750 ₹30,000 | 300 ₹12,000 | 200 ₹8,000 Lowest | 280 ₹11,200 | 255 ₹10,200 | 250 ₹10,000 |
| 3.00CHAIR CBA STEEL WITH ARMS Drg No: FD-75(M) | ||||||||||||
| 3.01 | Removing existing broken/damaged seat from steel tubular chair with arm and replacing with 1st class hard wood new seat frame duly canned with 2 mm width plastic cane and 4 mm for border strands as per Godrej pattern including two coats of black enamel painting over a coat of primer as per drawing completely all as specified and as directed by Engr-in-Charge Make :National Cane/Swastik/Shah | 140 | Each | 500 ₹70,000 | 500 ₹70,000 | 500 ₹70,000 | 800 ₹1,12,000 | 450 ₹63,000 | 200 ₹28,000 Lowest | 450 ₹63,000 | 410 ₹57,400 | 500 ₹70,000 |
| 3.02 | Removing existing broken/damaged back from steel tubular chair with arm and replacing with 1st class hard wood new seat frame duly canned with 2 mm width plastic cane and 4 mm for border strands as per Godrej pattern including two coats of black enamel painting over a coat of primer as per drawing completely all as specified and as directed by Engr-in-Charge Make :National Cane/Swastik/Shah | 140 | Each | 500 ₹70,000 | 500 ₹70,000 | 500 ₹70,000 | 800 ₹1,12,000 | 450 ₹63,000 | 200 ₹28,000 Lowest | 450 ₹63,000 | 410 ₹57,400 | 500 ₹70,000 |
| 3.03 | Removing existing unserviceable wooden handles of chair tubular with arms and supply and fix with new wooden handles made out of 1st class Hard Teak wood & fixing with suitable screws including applying two coats of black synthetic enamel paint over a coat of primer of approved make as per drawing completely all as specified and directed by Engr-in-Charge | 100 | Each | 200 ₹20,000 | 100 ₹10,000 | 200 ₹20,000 | 350 ₹35,000 | 200 ₹20,000 | 50 ₹5,000 Lowest | 280 ₹28,000 | 210 ₹21,000 | 200 ₹20,000 |
Tender Value
₹26.9 L
EMD Value
₹53,800
Closing Date
7 Aug 2025, 6:00 pmClosed
Garrison Engineer M NAS Arakkonam
Garrison Engineer M NAS Arakkonam 631006
REPAIRS TO STEEL FURNITURE AT ARAKKONAM
2025_MES_720379_1
8487E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer M NAS Arakkonam
AS PER NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer M NAS Arakkonam
₹53,800
Yes
28 Aug 2025
17 Jul 2025
9 Aug 2025
17 Jul 2025
7 Aug 2025
31 Jul 2025
Amount
CHAIR VARANDAH Drg No :FD 256
Removing of old unserviceable cane from Chair varandah, cleaning tubular surface and apply two coat of synthetic enamel white paint over a coat of red oxide and re canning with 4mm wide new plastic cane as per mat pattern,broken joints has to be welded and fix new rubber shoes for all the four legs as per drawing completely all as specified and as directed by the Engineer-in-Charge. Make of Cane : National Cane/Swastik/Shah
Removing existing unserviceable/rusted bottom of legs(100 to 150 mm length) from chair verandah and supplying and fixing with new MS tube 12 mm dia 1.8mm thick (100 to 150mm length) duly welded and finished including two coats of synthetic enamel white paint over a coat of primer completely all as specified and as directed by Engr-in-Charge.
CHAIR CBA STEEL WITH OUT ARMS Drg No:FD- 75(M)
Removing of existing damaged cane from seat of steel chair without arms and re-canning with new plastic cane half round of size 2mm width and 4 mm for border strands only as per Godrej pattern as per drawing complete all as specified and as directed by Engr-in-Charge. Make :National Cane/Swastik/Shah
Removing of existing damaged cane from back of steel chair without arms and re-canning with new plastic cane half round of size 2mm width and 4 mm for border strands only as per Godrej pattern as per drawing complete all as specified and as directed by Engr-in-Charge. Make :National Cane/Swastik/Shah
CHAIR CBA STEEL WITH ARMS Drg No: FD-75(M)
Removing existing broken/damaged seat from steel tubular chair with arm and replacing with 1st class hard wood new seat frame duly canned with 2 mm width plastic cane and 4 mm for border strands as per Godrej pattern including two coats of black enamel painting over a coat of primer as per drawing completely all as specified and as directed by Engr-in-Charge Make :National Cane/Swastik/Shah
Removing existing broken/damaged back from steel tubular chair with arm and replacing with 1st class hard wood new seat frame duly canned with 2 mm width plastic cane and 4 mm for border strands as per Godrej pattern including two coats of black enamel painting over a coat of primer as per drawing completely all as specified and as directed by Engr-in-Charge Make :National Cane/Swastik/Shah
Removing existing unserviceable wooden handles of chair tubular with arms and supply and fix with new wooden handles made out of 1st class Hard Teak wood & fixing with suitable screws including applying two coats of black synthetic enamel paint over a coat of primer of approved make as per drawing completely all as specified and directed by Engr-in-Charge
ALMIRAH LARGE STEEL/GLAZED Drg No :FD-1031/104/67
Removing existing unserviceable components from Almirah large/glazed steel and supplying and fixing new components as per drawing completely all as specified and directed by the Engineer-in-Charge as elaborated below
MS lock of size 65mm, 6 levers of Godrej Pattern with stainless keys in duplicate. Make: Harrison/ Link/Godrej.
Shelves made out of MS sheet of 1 mm thick duly painted with two coats of synthetic enamel over a coat of redoxide
Leg(Each) of steel almirah large/Glazed made out of MS sheet 1mm thick to be welded including applying two coats of synthetic enamel paint over a coat of red oxide
MS clamps with bolt and nuts etc to fix the shelves
3way Locking alignment with rod
Glass panes 3.5 mm thick Make : Modi Guard/Atul/Saint Gobin Note : Each portion of the door will be measured seperately). Drg No.FD-104
CP steel handle of size 100 mm long including provision of suitable nut and washers Make: Harrison
ALMIRAH MEDIUM STEEL/GLAZED Drg No :FD-1032/104/243
Removing existing unserviceable components from Almirah Medium/glazed steel and supplying and fixing following new components as per drawing complete all as specified and directed by the Engineer-in-Charge
MS lock of size 65mm, 6 levers of Godrej Pattern with stainless keys in duplicate. Make: Harrison/ Link/Godrej.
Shelves made out of MS sheet of 1 mm thick duly painted with two coats of synthetic enamel over a coat of redoxide
Leg(Each) of steel almirah large/Glazed made out of MS sheet 1mm thick to be welded including applying two coats of synthetic enamel paint over a coat of red oxide
MS clamps with bolt and nuts etc to fix the shelves
3way Locking alignment with rod
Glass panes 3.5 mm thick Make : Modi Guard/Atul/Saint Gobin Note : Each portion of the door will be measured seperately). Drg No.FD-104
CP steel handle of size 100 mm long including provision of suitable nut and washers Make: Harrison
RACK SIX TIER /3 TIER STEEL Drg No:FD- 1038/106
Removing existing unserviceable shelves from Rack six tier steel and supplying and fixing new shelves made out of MS sheet 1 mm thick and 02 Nos 'V' angle shall be provided at botttom of the shelves to get more strength including nuts bolts along with two coats of synthetic enamel OG paint over a coat of red oxide as per drawing completely all as specified and as directed by the Engr-in-Charge
Removing existing unserviceable iron angle from Rack six tier steel and supply and fix new iron angle of size 40x40 mm x 4mm thick as per drawing completely all as specified and directed by the Engineer-in-Charge
TABLE OFFICE OFFICER STEEL Drg No:FD- 1003/1002
Removing existing unserviceable components from Table office officer steel and supplying and fixing following new components as per drawing completely all as specified and directed by the Engineer-in-Charge
Top made out of Prelaminated particle board of size 1800x1200x18 mm thick exterior grade & edges shall be covered with 4 mm thick teak wood beading all round duly polished incuding tightening the frame Make : Green ply/Century/Archid ply Drg No-FD-1003
Top made out of Prelaminated particle board of size 1620x870x18 mm thick exterior grade & edges shall be covered with 4 mm thick teak wood beading all round duly polished including tightening the frame. Make : Green ply/Century/Archid ply Drg No-FD-1002
MS lock of size 50mm, 6 levers of Godrej Pattern with stainless keys in duplicate. Make: Harrison/ Link/Godrej.
Drawer made of 1 mm thick MS sheet duly painted with two coat of synthetic enamel over a coat of red oxide and grooves should be lubricated for smooth movement.
Hard rubber shoes for legs as approved by Engr-in-charge
TABLE OFFICE CLERK STEEL Drg No: FD-1004/84
Removing existing unserviceable components from Table office clerk steel and supplying and fixing following new components as per drawing completely all as specified and directed by the Engineer-in-Charge
Top made out of Prelaminated particle board of size 1200 x 610 x18 mm thick exterior grade & edges shall be covered with 4 mm thick teak wood beading all round duly polished incuding tightening the frame Make : Green ply/Century/Archid ply Drg No-FD-1004
MS lock of size 50mm, 6 levers of Godrej Pattern with stainless keys in duplicate. Make: Harrison/ Link/Godrej.
Drawer made of 1 mm thick MS sheet duly painted with two coat of synthetic enamel over a coat of red oxide and grooves should be lubricated for smooth movement.
Hard rubber shoes for legs as approved by Engr-in-charge
FOAM WITH/WITH OUT BACK Drg No : FD-77/1027
Removing the existing Broken/damaged seat planks of Form without back and supplying & fixing with new planks of size 1525x255x25mm of 1st class hardwood teak wood with suitable full threaded nuts and bolts including two coats of french polishing as directed by Engr - in-Charge
Removing the existing Broken/damaged seat planks of Form with back and supplying & fixing with new planks of size 1800x255x25mm of 1st class hardwood teak wood with suitable full threaded nuts and bolts including two coats of french polishing as directed by Engr-in-Charge Drg No : FD-78/1027
Removing the existing Broken/damaged back planks of Form with back and supplying & fixing with new planks of size 1800x150x19mm of 1st class hardwood teak wood with suitable full threaded nuts and bolts including two coats of french polishing as directed by Engr-in-Charge Drg No : FD-78/1027
Removing the existing unserviceable square tube of size 25 mm x 1.8 mm thick & supplying and fixing by welding in Table office officer/clk/3'x3'/3'x2'/Dining ORs/form with/without back including two coats of synthetic enamel paint over a coat of red oxide as per drawing completely all as specified and as directed by Engr-in-Charge Note : Welding shall be measured separately
Welding in repairs to Steel furniture length of welding exceeding 1cm but not exceeding 5cm all as specified and as directed by the Engineer-in-Charge.
Welding in repairs to steel furniture length of welding not exceeding 1cm all as specified and all as specified and as directed by the Engineer-in-Charge.
TABLE DINING OR’s Drg No: FD-165(M)
Removing of existing unserviceable top of table dining OR's and replacing the same with new 18mm thick BWR plywood and the same shall be covered with new aluminium sheet of 22 gauge thick with size of table and 50 x 75mm lapping to be given all around the table completely and shaking portion of mild steel frame to be welded and the entire steel frame be painted with two coat of synthetic enamel black paint over a coat of red oxide etc., as per drawing completely all as specified and as directed by Engr-in-Charge. Make : Green ply/Century/Archid ply
TEAPOY VARANDAH Drg No :FD-255
Removing the unserviceable top of Teapoy Verandah and replacing with new prelaminated particle Board of size (900 x 450)mm & the frame to be painted with two coat of synthetic enamel white paint over a coat of red oxide etc as per drawing completely all as specified and as directed by Engr-in-Charge. Make : Green ply/Century/Archid ply
PVC shoes for legs as approved by Engr-in-Charge
LOCKER STEEL Drg No: FD -1029/257
Welding the broken hinges 75mm long of lockers steel by running welding (each door) as per drawing completely all as specified and as directed by Engr-in-Charge
Removing existing unserviceable legs and replacing with new legs made out of 1mm thick MS sheet made to shape as shown in the drg and applying two coats of OG paint (enamel) over a coat of red oxide primer over replaced portion of Locker steel as per drawing completely all as specified and as directed by Engr-in-Charge
Removing old broken damaged hasp & staples of locker steel and supplying & fixing new hasp & staples of size 150 mm long made of CP steel to the shutters of locker steel all as specified & directed by Engr-in-charge
Removing old broken hanging rod of locker steel and supplying & fixing new hanging rod of 500mm long made out of 20mm dia chromium plated pipe of locker steel all as specified & directed by Engr-in-charge
CHAIR EASY STEEL WITH CUSHION Drg No: FD -358
Removing existing unserviceable components from chair easy steel with cushion and supplying and fixing following new components as per drawing completely all as specified and directed by the Engineer-in-Charge
Foam 50 mm thick of 40 density for Seat duly stitched with rexin
Foam 50 mm thick of 40 density for Back duly stitched with rexin
Plywood 12 mm thick for Seat Make : Green ply/Century/Archid ply
Plywood 12 mm thick for Back Make : Green ply/Century/Archid ply
Arm rest made out of 1st class hard wood teakwood duly polished
CHAIR SCHOOL WITH HAND BOARD Drg No : TP
Removing existing unserviceable components from chair school with hand board and supplying and fixing following new components as per drawing completely all as specified and directed by the Engineer-in-Charge
Foam 50 mm thick of 40 density for Seat duly stitched with rexin
Foam 50 mm thick of 40 density for Back duly stitched with rexin
Ply wood 12 mm thick for Seat Make : Green ply/Century/Archid ply
Ply wood 12 mm thick for Back Make : Green ply/Century/Archid ply
Arm rest made out of 1st class hard wood teakwood duly polished
CHAIR COPOLYMER Drg No: TP
Removing existing unserviceable/broken seat from chair copolymer seat and supply and fix with new seat Nilkamal or Equivalent model No 1 Chair-II and applying one coat of black enamelled paint on steel portions as per drawing completely all as specified and as directed by Engr-in-Charge
LOCKER FLYING CLOTH Drg No:SD-1365
Removing existing unserviceable MS lock from flying locker cloth and supply and fix new 6 lever brass lock with duplilcate keys as per drawing complete all as specified and as directed by Engr-in-Charge Make of Lock: Godrej/Harrison/Link.
TABLE 900 X900X 760mm STEEL Drg No: FD-1009
Removing existing unserviceable top from table 900x900 mm steel and supplying & fixing new top made out of Prelaminated particle board of size 900x900 mm &18mm thick exterior grade & edges shall be covered with 4 mm thick teak wood beading duly polished as per drawing complete all as specified and as directed by Engr-in-Charge Make : Green ply/Century/Archid ply
TABLE 900 X600 X 760mm WITH /WITH OUT DRAWER Drg No: FD-1008,1007
Removing of old unserviceable top of table 900 x600mm w/drawer steel and supplying & fixing new top made out of 18/19 mm thick pre-laminated particle board exterior grade with one side teak veneered finish and other side having balancing white lamination & providing 4mm thick teakwood beading all around the top and the wooden frame to be duly polished complete all as specified and as directed by Engr-in-charge Make : Green ply/Century/Archid ply
BOOK CASE STEEL Drg No: FD-90(M)
Removing of old & unserviceable glass shutter including locks from book case steel and supplying & fixing new glass & lock with 6 lever of approved quality wih duplicate keys 50 mm of Godrej Pattern and repairing of shutter frame glass and rolling accessories before fixing of glass shutter complete all as directed and shown on drg. Make of Lock: Godrej/Link/Harrison & Make of glass : Modiguard/Atul/Saint Gobain
Removing of old unserviceable handle of book case steel and supplying & fixing new chromium plated handle of approved quality all as specified and shown on drg
File Cabinet FD-397
Removing of existing unserviceable lock from Filing Cabinet and supplying and fixing new 6 lever brass lock with duplilcate keys as per drawing after repairing all 4 drawers of the cabinets including replacement of sliding rollers complete all as specified and as directed by Engr-in-Charge Make of Lock: Godrej/Harrison/Link.
TABLE BED SIDE MAP (FD/E6/MAP/15 ( R)
Removing old unserviceable legs,rails and supplying & fixing new MS square pipe of size 16mmX16mm square & thickness of wall not less than 16mm guage including welding and painting complete all as directed & specified by Engr-in-charge.
Removing old unserviceable top of table bed side and supplying & fixing new top made of 16 mm thick prelaminated particle board exterior grade Make : Green ply/Century/Archid ply ISI marked one side teak face and other side balancing white as per existing shape and size including standard PVC edging (min thickness 1.6mm) shall be provided all round in tops as per existing shape with headless nails completely.
Removing old unserviceable drawer and supplying & fixing new upper drawer as per existing shape and size front of drawer shall be 12mm thick prelaminated particle board exterior grade Make : Green ply/Century/Archid ply and sides and back of drawer shall be made of 12mm thick commercial plywood BWR quality Make : Green ply/Century/Archid ply and bottom of drawer shall be provided with 6 mm thick commercial plywood BWR quality as per existing shape and size complete.
Removing old unserviceable back of table bed side and supplying & fixing new back made of 6 mm thick commercial plywood BWR Make : Green ply/Century/Archid ply as per existing shape and size complete.
RACK SIDE 2/3 SPACE WITH TRAY STEEL
Removing old unserviceable legs of rack steel and supplying & fixing new legs of MS steel and fixing iron angle completely by mean of welding and applying one coat of synthetic enamel paint over a coat of red oxide primer Make : Asian/Berger including preparation of new steel surface completely as specified and directed by Engr-in-charge.
Removing old serviceable steel shelves and supplying & fixing new shelves of existing shape and size made out of 20 gauge PGI sheet & fixing completely by means of bolting/welding or riveting etc including one coat of synthetic enamel paint (spray painting) over one coat of red oxide primer alongwith preparation of new steel surface complete all as specified and directed.
Bed hard steel Drg No : FD/E6/MAP/08
Removing of unserviceable/broken plywood from bed and providing new plywood of commercial type 12mm thick 7 ply of BWR grade and conforming to IS 303 of 1975 and all as as per drg & directed by Engr-in-charge.
SHANMUGA TRADERS (BID ID -3381289)
SUSII CONSTRUCTIONS (BID ID -3384399)
SRI CHAKRA CABINETS (BID ID -3385528)
M.G.Swamy.Co., (BID ID -3385524)
SHRI S SANTHAKUMAR (BID ID -3384353)
Mahesh Traders (BID ID -3384980)
SKR ENTERPRISES (BID ID -3383087)
PRIYADARSHINI CONSTRUCTIONS (BID ID -3382242)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .