REPAIRS TO CERTAIN E/M RELATED WORKS IN HANGERS OF ARMY AVN SQN INCLUDING TECHNICAL AREAS IN AOR OF AGE E/M UNDER GE NASIK ROAD.

Amount

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power point complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store and making good to disturb surfaces of wall/floors etc as specified & directed.

M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLSH type drawn through and including stove enamelled steel conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLSH type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point/ fan point controlled by one, one way swtich. Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

All as per ser item No. 2.00 herein before but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per ser item No. 2.00 herein before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLSH type for one 15 Amp 6 pin socket outlet point including PVC cable 4 Sqmm FRLSH type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes.

All as per ser item No. 2.00 herein before but on independent board.

All as per ser item No. 2.00 herein before but one light point controlled by 2 way switches.

All as per ser item No. 2.00 herein before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.

M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC casing and caping (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point and one fan point controlled by one, one way swtich. Note:- Unit rate include for cutting chases for sinking for boxes and making good to wall ,floors etc.

All as per ser item No. 8.00 herein before but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per ser item No. 8.00 herein before but on independent board.

All as per ser item No. 8.00 here in before but one light point controlled by 2 way switches.

All as per ser item No. 8.00 herein before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per ser item No. 8.00 herein before but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including Fibre insulation boards, treated on one face only of adequate size for mounting purposes.

Supply and fixing in replacement of switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed.

Supply and fixing in replacement of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.

Supply and fixing in replacement of switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.

Supply and fixing in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 3 pin) 5/15 Amps, 230V, AC.

Supply and fix in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish.

Supply and fixing in replacement of switch piano flush button 5 Amp single pole 2 way 230 volts white finish all as specified & directed.

M&L for replacement and connecting up fan regulator electronic on existing phenolic laminated sheet dimmer type 230 volts, 100 watts suitable for ceiling fan 1200/1400mm sweep.

Supply and fixing in replacement of LED 150 Watt having Luminious output 150W, operating temp-10 degree C to 50 Degree C highbay optica heavy duty luminaires with engineering grade diffuser for added protection, secondary optics, suitable for industrial lighting applications, with IP 65 incl connecting up with three core flexible copper conductor cable of suitable size from ceiling rose Completed all as directed.

Supply and fixing in replacement of LED 20 Watt inverter LED batten with rod complete with lithium ion battery with charging time 8-10 hours and backup time upto 4 hours mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.

Supply and fixing in replacement of submain wiring with Four single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 6 Sqmm drawn through in and including steel conduit including 6 Sqmm 1100Volts grade, FRLSH type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

Supply and fixing in replacement of submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including PVC heavy duty surface casing caping including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 2.5 Sqmm drawn through in and including PVC heavy duty surface casing caping including 2.5 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note for Srl item No. (i) 23.00 herein before :- (i) Four runs of cables and one run of continuous earthing cable drawn through Steel conduit will be measured as one length as sub main. 24.00 & 25.00 herein before :- (ii) Two runs of cables and one run of continuous earthing cable drawn in casing and caping will be measured as one length as sub main. (iii) PVC casing caping and its accessories is deem to be included in this item rates. (iv) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc.

Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP&N 4 ways all as specified & directed.

Supply and fixing in replacement 4 Pole MCCB 160 Amp, 50 Hz, 415 V, with adjustable thermal & adjustable magnetic setting, breaking capacity 36 KA.

Supply and fixing in replacement 3 Pole MCCB 630 Amp, 50 Hz, 415 V, with adjustable thermal & adjustable magnetic setting, breaking capacity 50KA. REF.STD,IS13947

Supply and fixing in replacement 3 Pole MCCB 800 Amp, 50 Hz, 415 V, with adjustable thermal & adjustable magnetic setting, breaking capacity 50KA. REF.STD,IS13947 PART -2

Supply fix in replacement of ML Contactor 32 A 3P 1V AC in built 2NO+2NC AC-3 AC HSN Code -85369090

Supply & Fix in replacement of Fully automatic Star-Delta starters MU3 SASD,35 HP (CS91885COGO) coil Voltage 360V, Type- MU3 SASD ,insulation voltage 690V, Relay range(A)-24-38A

Supply And fix in replacement of ML1.5 FASD Starter 440V 3 Phase,Product code/Relay range/Power-SS91855POEO/20-30/25HP,Type FASD Stater

Supply and fix in replacement of MCCB 200A DN2-250D Cat no- CM92109OOP1OG 4Pole completed all as specfied and directed.

Supply and fix in replacement MCCB 63 Amp TP, 415 volts 16KA.

M&L for replacement Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI strip 32 x 6mm, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 40 mm incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”.

M&L for dismantling of existing earth strip of any type/size from roof top of hanger/wall of hanger and re-fixing the same all as specified & directed by Engr- in-C (Note): (i) Rate included for dismantling re-fixing of existing earth strip including epoxy/proceiling Insulator. (ii) Refixing of lightining conductor/rod on existing portion.

Supply and fixing in replacement of LED flood light 120 watt 230 volts AC outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and accessories all as specified and directed by Engineer in Charge.

Supply and fixing in replacement of LED flood light 100 watt 230 volts AC outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and accessories all as specified and directed by Engineer in Charge.

Supply and fixing in replacement of invertor LED luminaire 600 x 600mm, 36 watt, 220 volts AC recessed/ surface type fittings, IP 20 with battery backup and tri-colour CCT with remote control, epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

M&L for Chemical Earthing with Copper electrode Bonded 25 mm X 3 Mtr Long. with Pure electrolytic copper is uniformly molecularly bonded to a high strength steel core with a minimum thickness of 0.254mm and Ground Enhancing Backfill Compound (Safe Ground). The Characteristics of this compound is highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities. (Each earthing with 25 kgs 2 Bagbackfill compound ) Boring and Installation at site complete all as directed Note:- 1. If Earth resistance value not achived less than 1 ohm ,then contractor has to do the chemical earthing without any extra cost 2. Earth strip will be measured and paid seperaterly.

Supply & Fix in replacement of led obstruction lights 8.5W, led beacon steady aviation light and low intensity led aviation light IP 65 Temp-25.7 degree C,Humidity 47.0% Rhoperated 230 V AC ,Luminious Efficancy, Luminous Intensity

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.

Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engineer - in - Charge.

Supply and fixing in replacement of XLPE insulated armoured and PVC sheathed heavy duty electric cable of 3.5 core 35 sqmm aluminium conductor 1100 volt grade as per IS 7098 (Part-1) 1988 with latest amendment laid in tranches passing through pipes /ducts including testing complete. Note: Rate is inclusive of taking out old unsv cable, cable gland & cable lugs.

All as per Srl item No. 45.00 here in before but 3.5 core 50 sqmm

All as per Srl item No 45.00 here in before but 3.5 core 95 sqmm

EXCAVATION BY TENCHLESS TECH - Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia. Suitable for 0.4 mpa working pressure.

M&L for Double Walled Corrugated DWC HDPE Pipe of outer dia 50mm and innter dia 38mm including 90 degree bends with coupler and rubber ring laid in trenches of size 50 mm suitable for cable protection complete all as specified and direct.

M&L for Double Walled Corrugated DWC HDPE Pipe of outer dia 90mm and innter dia 75mm including 90 degree bends with including coupler and rubber ring laid in trenches of size 90 mm suitable for cable protection complete all as specified and direct.

Supply and joint cable jointing kit straight through joint epoxy type of size 10 sqmm 4 core to 16 sqmm 4 core all as specified and directed.

Supply and joint cable jointing kit straight through joint epoxy type of size 25 sqmm 3.5 core to 50 sqmm 3.5 core all as specified and directed.

Supply Fixing in replacement of LED outdoor drivers, suitable for 60-100 watt street/flood light fitting all as specified and directed by Enginner-in-Charge.

S&F in replacement onload change over switches with Encloser 4 pole transfer switching equipement power frame 63A .

S&F in replacement onload change over switches with Encloser 4 pole transfer switching equipement power frame 100A .

S&F in replacement onload change over switches with Encloser 4 pole transfer switching equipement power frame 125A.

S&F in replacement onload change over switches with Encloser 4 pole transfer switching equipement power frame 160A.

Supply and fixing in replacement of Air termination single pointed aluminium rod 12mm dia and 300 mm long complete all as specified and directed

Supply and fixing in replacement of Air termination single pointed copper rod 12mm dia and 300 mm long complete all as specified and directed

Supply and fixing in replacement of aluminium strip 25x3.15mm with saddles and fixing screws etc. for roof conductors and down down conductors complete all as specified and directed.

Supply and fixing in replacement of copper strip 20x3.15mm with saddles and fixing screws etc. for roof conductors and down down conductors complete all as specified and directed.

Supply and fixing test point terminal block made of gun metal or phosphorous rozne size 75x75x25 mm drilled and screwed including 3 nos 8mm dia 25 mm long hex,head screw complete all as specified and directed.

Supply and fixing in replacement of galvannised strip 32x6mm with saddles and fixing screws etc. for roof conductors and down down conductors complete all as specified and directed.

Supply and fix in replacement of Flameproof Well Glass rectangular 60 W 230 volts AC outdoor type with thermal management in multiple optics and equipped with IP66 flame proof protection with impact and corrosion resistant complete with driver and accessories all as specified and directed by Engineer in Charge.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 44,946.00.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Shree Sai Samarth Enterprises

M/s Ravi Electrical

Bidder Name

MAHIMA CONSTRUCTION

M/s Ravi Electrical

Shree Sai Samarth Enterprises