Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.3 LAccepted-AOC DOOR NO IV 400 NEAR RAMANTHALI GHSS RAMANTHALI PO KANNUR 670308 | KANNUR | KERALA | 670308 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹23.6 L+₹1.3 L (5.97%)Rejected-Finance H NO 111 553 64 CATTLE POUND TOWARDS AVA HILL CAMP ROAD ARUVANKADU NILGIRIS DIST TAMIL NADU 643 202 | THE NILGIRIS | TAMIL NADU | 643202 | L2 | Rejected-Finance Being Not Lowest Tenderer | |
| 3 | L3₹24.0 L+₹1.7 L (7.64%)Rejected-Finance NO 1A 1 SHALOM VALLUVAR STREET SIVANANDHA COLONY COIMBATORE TAMIL NADU 641 012 | COIMBATORE | TAMIL NADU | 641012 | L3 | Rejected-Finance Being Not Lowest Tenderer | |
| 4 | L4₹24.5 L+₹2.2 L (9.73%)Rejected-Finance NO 1C CHROMPET KANCHIPURAM TAMIL NADU 600044 INDIA | CHENGALPATTU | TAMIL NADU | 600044 | L4 | Rejected-Finance Being Not Lowest Tenderer | |
| 5 | L5₹26.6 L+₹4.3 L (19.5%)Rejected-Finance 25 A BR SAMY LANE KATTOOR COIMBATORE 641009 | COIMBATORE | COIMBATORE | TAMIL NADU | 641009 | L5 | Rejected-Finance Being Not Lowest Tenderer |
Tender Value
₹27 L
EMD Value
₹54,000
Closing Date
28 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Wellington
Garrison Engineer Wellington Barrack Post Nilgiris Pin code-643231
RESTORATION OF LT ELECTRIC SUPPLY AND CONNECTED WORKS OCCURRED DUE TO STORM DAMAGE AND MAINT REPAIR AND IMPROVEMENT TO EARTHINGS OF OTM MD ACCN UNDER GE WELLINGTON
2023_MES_578088_1
8777/E8
Open Tender
Electrical and Maintenance Works
Item Rate
150 days
Wellington
As per Tender Documents
4 documents required · 4 mandatory
₹500
GE Wellington
₹54,000
Yes
10 Apr 2023
31 Jan 2023
7 Mar 2023
1 Feb 2023
28 Feb 2023
14 Feb 2023
Amount
Supply, install, testing and commissioning and testing factory made and tested CPRI type test certified) (KIOSK) out door type, floor mounted,compertmantalised suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, dust and vermin proof, made of 3.15mm CRCA MS sheet with digital Volt meter, Ammeter, with CTs ,Led lamps RYB for all incomers & outgoings and base frame of 50x50x6mm angle iron , powder coated, having front and rear openeable hinged double door shutters with aprons for cable entry and locking arrangement complete with following cables all as specified and directed. (a) INCOMING:- (i) On load change over switches, 4 pole, 160 Amps rated current -1 Set Make :- L&T,Legrand, Scheineiders (b) OUTGOING (i) MCCB 4 Pole, 16 KA, 100 Amps 415 Volts - 1 Nos Make:-L&T,Legrand, Scheineiders (ii) MCCB 4 Pole, 16 KA, 63 Amps 415 Volts - 1 Nos Make:-L&T,Legrand, Scheineiders (iii) MCB SPN 2 Pole, 16 KA, 40 Amps 415 Volts - 1 Nos Make:-L&T,Legrand, Scheineiders (c) 200 Amps aluminium busbar for phase and 600 Amps for neutral duly insulated with PVC sleeves RYB, mounted on heavy duty epoxy insulators in separate compartment - 01 Set (d) Digital multi function panel meter for measuring voltage, Amps and Frequency with suitable CTs and back up protection - 1 Nos (e) LED type Indication lamp 240 Volts Set of three - 1 Set (f) danger notice board of size 200 mm x 150 mm x 1.6 mm thick of mild steel sheet printed with vitreous enabled white paint and letter figure and convention skull and bones of signal red colour and fixed / rivetted with panel -02 Nos Note:- (i) Rate quoted is deemed to be inclusive of PCC foundation/pedestal and connected earth work. (ii) Panels shall be placed above 0.6 mtr from ground level. (iii) Outgoing MCCBs shall be fed with solid busbar connectors. (iv) Cables shall be terminated using gun metal /SS glands.
Supply and replacement of 10 Sqmm 4 Core of 1100 volts grade LT UG Cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor, laid in trenches/ducts, fixed on wall/inside panel, drawn through pipe including takingout the old unsv LT cable complete all as specified and directed Note: Rate deemed to be inclusive of conecting up with control gear including cable glands and cable lugs complete
Supply and replacement of 25 Sqmm 4 Core of 1100 volts grade LT UG Cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor, laid in trenches/ducts, fixed on wall/inside panel, drawn through pipe including takingout the old unsv LT cable complete all as specified and directed Note: Rate deemed to be inclusive of conecting up with control gear including cable glands and cable lugs complete
Supply and replacement of 50 Sqmm 3.5 Core of 1100 volts grade LT UG Cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor, laid in trenches/ducts, fixed on wall/inside panel, drawn through pipe including takingout the old unsv LT cable complete all as specified and directed Note: Rate deemed to be inclusive of conecting up with control gear including cable glands and cable lugs complete
Supply and replacement of 70 Sqmm 3.5 Core of 1100 volts grade LT UG Cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor, laid in trenches/ducts, fixed on wall/inside panel, drawn through pipe including takingout the old unsv LT cable complete all as specified and directed Note: Rate deemed to be inclusive of conecting up with control gear including cable glands and cable lugs complete
Supply and replacement of 120 Sqmm 3.5 Core of 1100 volts grade LT UG Cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor, laid in trenches/ducts, fixed on wall/inside panel, drawn through pipe including takingout the old unsv LT cable complete all as specified and directed Note: Rate deemed to be inclusive of conecting up with control gear including cable glands and cable lugs complete
Supply and replacement of 185 Sqmm 3.5 Core of 1100 volts grade LT UG Cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor, laid in trenches/ducts, fixed on wall/inside panel, drawn through pipe including takingout the old unsv LT cable complete all as specified and directed Note: Rate deemed to be inclusive of conecting up with control gear including cable glands and cable lugs complete
Supply and replacement of 95 Sqmm 3.5 Core of 1100 volts grade LT UG Cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor, laid in trenches/ducts, fixed on wall/inside panel, drawn through pipe including takingout the old unsv LT cable complete all as specified and directed Note: Rate deemed to be inclusive of conecting up with control gear including cable glands and cable lugs complete
Supply and replacement of Bus bar chamber 4 way, 200 amps with aluminium busbar three phase 415 volts with canopy suitable for outdoor and MS angle frame for foundation with PCC 1:3:6 complete all as specified and directed
Supply and replace cable route indicator cast iron of dia not less than 100 mm duly embossed as LT with 32mm X 6 mm MS Angle welded and foundation with PCC 1:3:6 20 mm graded aggregate complete all as specified and directed
Painting the external exposed surfaces of steel tubular swaged /rail poles of 9 metres long with cross arms, bracket and connected accessories and LT panel boards with one coat of aluminium paint including preparation of old painted surfaces and pasting radium red stickers/ paint with 3 lines around the pole complete all as directed.
Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in soft/ loose soil for laying of under ground cable and foundation of poles.etc complete as specified and as directed.
Returning filling in including spreading, leveling watering and well ramming in layers not exceeding 25 Cm thick etc complete as specified and as directed.
Removal of excavated surplus soil not exceeding 50 m and depositing where directed at al level not exceeding 1.5 m above the starting point and all as specified and as directed.
Supply and spreading clean dry riddled sand in trenches for cushioning all as specified for cable protection in trenches / ducts complete all as directed. (Note: The punned down thickness shall only be measured)
Supplying and laying reinforced precast concrete cable cover,Class LV, Type I, flat, size 250mm x 150mm x 40mm all as specified and directed.
Cutting PCC/ Road 200 mm thick for laying of cable all as specified and directed
Plain cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate for filling in road cutting including necessary form work all as specified and as directed.
GI Pipe Medium grade 80 mm dia for cable protection in trenches/ at PCC pole for loopin/loop out of cable and cable entry at Bldg/ block end including taking down all as specified and directed
Heat shrinkables straight through cable joint kit for XLPE, wire armoured LT UG cables of 3 ½ core of size 70 to 120 sqmm all as specified and directed.
Heat shrinkables straight through cable joint kit for XLPE , wire armoured LT UG cables of 3 ½ core of size 150 to 185 sqmm all as specified and directed.
GI Pipe Medium grade 40 mm dia for cable protection in trenches/ at PCC pole for loopin/loop out of cable and cable entry at Bldg/ block end including taking down all as specified and directed
Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate . Earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt upto 1.5 meter depth all around the earth plate and connected to earth lead of GI strip of 25x4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel and thimbles and other end of the earth wire connected to Plant/equipment and protected by galvanized iron or steel pipe light grade and water pipe 20mm bore GI medium grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009 and also including making test point for testing of earthing made out of gun metal or phosphorous bronze size 75x75x25 mm complete. Note:- On testing after completion of earthing if desired earth resistance below 5 ohms is not achieved, the earthing will be redone at no extra cost.
Chemical earthing complete with Copper earth plate electrode 90cmx60cm x 5 mm thick buried directly in ground vertically to depth not less than 3.00 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level connected to and including Copper strip of 32x6mm as earth lead up to 7.5 mtr long fixed by means of bolts, nuts, check nuts and washers etc. of galvanised iron or steel including provn of GI protection pipe light grade of 40mm bore and connected to earth strip earthing test point all as shown in electrical plate No.5 of SSR Part-I 2009 and as specified or indicated and testing on completion including necessary excavation & earthwork in any type of soil, PCC (1:3:6) type C1 chamber, precast slab 50mm thick in cement concrete (1:2:4)type B1 (reinforced with welded steel wire fabric (XPM) of weight not less than 4kg/sqm) with frame, funnel with watering pipe of 15mm bore medium grade, wire mesh and lugs, test point including salt, Coal & Magnesium sulphate etc. complete. Note:- copper strip exceeding 7.5m long shall be measured & paid separately.The earth resistance value less than 1 ohm.Failing to achieve the value the contractor shall be re do the earthing without any extra cost.
Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw all as specifies and directed.
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4mm galvanised iron strip with PVC sleeve complete all as specified and directed.
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20x3mm Copper strip with PVC sleeve complete all as specified and directed.
sree devi construction
shalom constructions
LAKSHMI ELECTRICAL ENTERPRISES
rvelectricals
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .