REPAIRS/MAINT OF ROAD FURNITURE, ROAD PAINTING/MARKING AND CERTAIN ROADS/FOOTPATH BURN IN AREA OF AGE B/R- II UNDER GE (WEST) LUCKNOW

S & F in repair cat eyes with two way solar reflective type with 30 mm length double shank of plastic body of size 100mm x 110mm x 20mm (overall height 50 mm) and with PAMA striplens reflector and weight 164 gram fixed with special epoxy chemical as per manufactures instructions complete all as specified and directed.

M & L for providing and applying 2.5 mm thick road marking strips with 250 gram Glass Beads(retroreflective) of specified shade/colour using hot thermoplastic material by fully/semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoes heater, driven by experoenced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dier, seals, oil, grease and foreign material etc, complete as per direction and accordance with applicable specifidactions as per MoRTH specification having Titatnium -10%, Resin-18%, Intermix Glass Beads - 30 % & filler (Calcite) - 42% in proportion complete all as specified and directed.

M & L for metal road delinators made out of 75mm bore medium grade MS pipe of length 80cm embeded with PCC 1:3:6 of size 30cm x30cm x 30cm using 20mm graded stone aggregate 30cm below road level including taking down existing corroded/broken delinators and applying tow coats of synthetic enamel paint over a coat of zinc chrome paint and fixing with high intensity prismatic reflective tapes of 137.5mm width red colour in 2 pieces and 137.5mm yellow/white colour 1 piece alternatively complete all as specified and directed.

M & L for providing and painting complying with IS:164 2023, IRC:35-2015 on old surface and applying two coats of water based paint of approved brand with automatic kerb painting machine (Consumption shall be 1 Ltr for 3 Sqm area) on existing Kerb/RCC Crash Barrier/Parapet Wall, Head walls etc, to give an even shade, after thoroyghly cleaning of the existing surfaces by brooming, water washing the surface to remove all dirt, dust, peeled old paint, mortar drops and foreign matters including preparing the surafce even and smooth by sand paper, if requirted which includes cost of materials, labours, tool and tackles, cost of safety measures at work site,, insurance, statuatory labour compliances, all taxes, duties, cess cost of transportation, loading/unloading etc, complete all as specified and directed.

M & L for providing and painting complying with IS:164 2023, IRC:35-2015 including one coat primer and applying two coats of water based paint of approved brand with automatic kerb painting machine (Consumption shall be 1 Ltr for 3 Sqm area) on existing Kerb/RCC Crash Barrier/Parapet Wall, Head walls etc, to give an even shade, after thoroyghly cleaning of the existing surfaces by brooming, water washing the surface to remove all dirt, dust, peeled old paint, mortar drops and foreign matters including preparing the surafce even and smooth by sand paper, if requirted which includes cost of materials, labours, tool and tackles, cost of safety measures at work site,, insurance, statuatory labour compliances, all taxes, duties, cess cost of transportation, loading/unloading etc, complete all as specified and directed.

S&F aluminium-alloy body Solar stud with following specification :- (a) Solar panel Mono-Crystalline Solar 2.4V/0.3 Watt and having charging capacity at a very low sunlight. (b) Red colour Six Super Bright LEDs with 10000 to 18000 mcd (Millicandela) 8 mm fitted at appropriate height for clear blinking point. (c) 1.2V Ni-MH or Ni-CD rechargeable battery capacity 1300 mAh. LSD (Low Self Discharge technology) fitted inside solar stud. (d) Working time 3 to 4 days successively after the battery is fully charged. (e) Charging time for full charge One full sunny day. (f) Working temperature : 10 to 75 Degree Celcius. (g) Flash rate : 60 to 70 times per minute normally. (h) Brightness sensitive auto-switch, automatically turns on at dusk and turns off at dawn to ensure easy and safe night driving. (j) High visibility LEDs help ensure easy and and safe night driving from a distance of 1000-1100 Meters approx. (k) Solar stud should be free of maintenance and operational in all weather conditions. (i) The PCB board and solar panel should be sealed in Poly Carbonate case for extra waterproofing and high/low temperature protection. The logo of the manufacturer should be embossed on front side of the body to ensure genuinesess. Dimension/Size of the Solar Std should be 125 mmx125mmx25 mm body, with shank height 65 mm (Total height 90 mm including shank) (m) Weight of the Solar Stud should be 650 Gram approx. (n) Minimum 150 gram of a special epoxy chemical should be used per pcs to fix the stud on the road surface.

Taking down old sign board of any description including frame work complete all as specified and directed.

S & F with stainless steel frame including necessary clamps etc retro-reflective double sided road name signboards comprising of 4mm thick aluminium composite panel (ACP) mill finished or PDVF coated or as specified as base board, micro prismatic retro-reflective sheet and electro cut coloured overlay film. The aluminium composite panel (ACP) shall have a thickness of 4mm with 0.5mm thick skin of aluminium on both sides. The ACP shall be routed, folded and fixed on the stainless steel frame with VHB tape, 24mm wide and 2.3mm thick provided through out the length and breadth of the frame including riveting at the right angle face of the frame with pop riveting or with self taping ss screws 5mm dia spaced not more than 300mm center to center ensuring that no reveting is seen on either face of the frame. On the front and back face of the ACP, micro prismatic retro-reflective sheet confirming to Type-XI or IRC: 67:2012 shall be pressure fixed as background sheet which will be over laid with electro cut transparent film of approved make and colour to create a desired road name information message, The rate shall include all materials, labour,equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of Engineer-in-Charge.

S&F 50mm dia and 1.80mm thickness of wall stainless steel pipe for framing of sign board including cuttng, welding and framing of stainless steel structure complete all as specified and directed.

Excavation post holes (or similar holes) in soft/loose soil each n. exc 0.5 Cum, getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm complete all as specified and directed.