BLOCK REPAIR AND PAINTING OF VESSEL M.V. TATINI

Amount

Vessel to be blocked and unblocking

Ultrasonic gauging to be done only on the underwater portion of hull plate and bottom plate.

Corroded, holes & thinned down plates, structural members, railing posts etc. to be cropped & renewed – Main deck Aft and– 6.8 MT. Deck Structure – 2.5 MT Upper deck alongwith wheel house deck and top – 2.2MT Bottom plate-5.5MT Side Hull-2MT

Steel fender 200 NB, 8 MM thick half cut pipe stiffened with ‘D’ shaped stiffeners 500 mm apart.

Twin bollard renewal by 150NB pipe.

Single bollard renewal by 150NB pipe.

Propeller Shaft & Rudder arrangements including all bushes are to be dismantled and fitted back after necessary repair.

STBD sides Propeller shafts worn out journals metalizing by S.S. Electrode & machining to suit with the respective bushes and trueness to be checked & rectified.

Both side propeller blades broken tips are to be repaired by dove tail joining method with the Mn-Bronze piece welded by bronzed electrode .

Rubber cutlass bushes are to be re-rubberised

Gland bushes & gland covers (G.M.) are to be re-sleeved – 02 sets

Propellers & couplings are to be bed-in with the respective propeller shaft.

Both the rudder stock worn out journals are to be metalized & machined.

Rudder stock upper & lower GM bush & gland covers are to be re-sleeved -02 sets

Rudder blade securing S.S. bolts & nuts (fitted type) are to be renewed

Both the toilet WC alongwith concrete flooring are to be renewed alongwith flash tank and associated piping arrangement

Engine room and rudder hold bilge suction pipe line opening, cleaning, pressure testing and fitment with new joints and fasteners as required.

Bilge line globe valves alongwith sea chest valve cleaning, pressure testing and repair if defective found.

Crews’ cabin, master cabin and wheel house inside plywood paneling alongwith necessary wooden batons & bits to be renewed.

Engine room bilge to be cleaned thoroughly and the floor plate to be fitted in position.

Entire electrical wiring (AC & DC) alongwith supply and fitment of light fittings, Navigational lights, switch, board, etc.

Renewed of Zinc-Anode

Renewal of Semi-Rotary Hand pump(No.5).

Repair of Tubwell

Entire vessel external and internal surfaces along with inside frame work, bulkheads, cabin, deck fittings, railing etc. to be thoroughly chipped, scrapped, cleaned and painted internally and externally as per enclosed painting schedule

B.K. ENGINEERING WORKS (BID ID -7338033)

NALANDA ENGINEERING ENTERPRISE (BID ID -7377964)

DYNATRON SERVICES PVT. LTD. (BID ID -7403945)

The Shalimar Works (1980) Ltd. (BID ID -7306291)