REPAIR TO BOUNDARY WALL, SECURITY WALL, COMPOUND WALL, FENCING PATH, HARDSTANDING AND CONNECTED WORKS AT SAHAPORE MILITARY CAMP TARATLA AND RASPUNJA MILITARY CAMP UNDER GE (C) KOLKATA

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Demolition of Plain cement concrete ( Un reinforced)in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling fencing wire mesh any type complete all as specified and as directed.

Dismantling posts of ant type ( wood, steel or RCC) of any section embedded in concrete including taking out embedded portion and making good disturbed ground complete all as spcified and as directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling stone slab or tiles of any description and thickness laid dry or laid dry and pointed complete all as specifieda nd as directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc n exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm as in soft/loose soil complete all as specified and directed.

Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Material and Labour Plain cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

Material and Labour RCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Material and Labour RCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in Beam, cantilever, bressummers complete all as specified and directed.

Material and Labour RCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Material and Labour Precast cement concrete Jalli 50mm thick type B0 ( using 12.5mm graded crushed stone aggregates) including formwork and set in CM 1:4 complete all as specified and as directed including dismantling old unserviceable RCC jalli..

Material and Labour Brick work with fly ash bricks of designation 7.5, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

All as above Item No.17.00 here-in-before but except bricks. Note:- Servicable bricks will be obtained from Item No. 12.00 mentioned here-in-before.

Material and Labour Plain cement concrete 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregates) as in coping, benching complete all as specified and as directed.

Use and waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete complete all as specified and as directed.

Use and waste Formwork to sides of concrete pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete and sqaure or rectangular in section complete all as specified and as directed.

Use and waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc for rough finished surfaces of concrete complete all as specified and as directed.

Supply only PVC coated MS galvanised Chain link fencing with straining bolts and binding wire complete all as specified and as directed. Note:- Line wires shall be measured and paid separately under relevant items of these schedule.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Supply and fix Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) including taking down old unserviceable barbed wire complete all as specified and as direcetd.

Supply and fix Mild steel work in posts and struts and flat iron in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Material and Labour Mild steel framed work for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc conforming to Fe-410-0 Gde E-250 complete all as specified and directed.

Material and Labour Mild steel framed work for ornamental and intricate design, etc conforming to Fe-410-0 Gde E-250 complete all as specified and directed.

Supply Only Mild steel TMT bars 8mm dia including binding with mild steel wire ( annealed) not less than 0.90mm dia complete.

Supply and Fix Mild steel screw bolts ( Machine made) with hexagonal or square heads at one end and screwed at other end, each screwed end to be fitted with one hexagonal or square nut and one washer, length of bolt 5Cm to 10 Cm and dia 11mm to 15mm complete all as specified and as directed.

Supply and fix Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Mild steel TMT bars 6-8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in stirrups, spacers and binders complete all as specified and as directed by Engineer-in-Charge.

Materials and Labour 150mm thick plain cement concrete type D2 ( 1:4:8, using 40mm graded crushed stone aggrgates) as in sub base complete all as specified and as direcetd.

Materials and Labour 100mm thick plain cement concrete type C2 ( 1:3:6, using 40mm graded crushed stone aggrgates) as in sub base complete all as specified and as direcetd.

Materials and Labour 60mm thick factory made chamfered edge cement concrete interlocking paver block of M-35 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed..

Materials and Labour Rubber moulded, coloured Pre polished Chequered cement concrete tiles of size 300mm x300mm x25mm thick, with grey cement and no pigment, jointed in neat cemnt slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and as directed including taking out old unserviceable chequerred tiles.

Material and Labour Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surfaces even and fair without using extra cement complete all as specified and directed.

Material and Labour Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surfaces even and fair without using extra cement complete all as specified and directed.

Materials and labour Preparation of newly plastered external surfaces of any description and applying Premium Acrylic smooth exterior paint with silicon additives of required shade complete all as specified and directed. Note:- For new works Two or more coats applied @ 1.43 litre/ 10 Sqm area over and including Priming coat of exterior primer applied @ 2.20 Kg/ 10 Sqm.

Materials and labour Complete removal of existing treatment from old external surfaces and applying two coats Premium Acrylic smooth exterior paint with silicon additives of required shade complete all as specified and directed. Note:- For new works/ Complete removal of existing treatmnt Two or more coats applied @ 1.43 litre/ 10 Sqm area over and including Priming coat of exterior primer applied @ 2.20 Kg/ 10 Sqm.

Materials and Labour Cement based paint of any colour / tint, two coats over a coat of alkali resistant primer on newly plastered external surfaces including necessary preparation of surfaces complete all as specified and as directed.

Materials and Labour Cement based paint of any colour / tint, two coats over a coat of alkali resistant primer on old plastered external surfaces after complete removal of existing treatment complete all as specified and as directed.

Materials and Labour Cement based paint of any colour / tint, one coat on old plastered external surfaces including necessary preparation of surfaces complete all as specified and as directed.

Material and Labour Synthetic enamel paint of any colour/ tint, two coats over a coat of red oxide primer on new steel or iron surfaces over 10 Cm width or girth including necessary preparation of surfaces complete all as specified and directed.

M/S. S. C. GHOSH

PINKY CO.

SRI BHOOMIJ INFRAPROJECTS & SERVICES LLP

JAY MA TARA TRADERS

SPECIAL CONCRETE AND CONSTRUCTION CO.

M/S L.R.ENTERPRISES

KT CONSTRUCTIONS