Establishment of new Thumbalapatty 230/110kV AIS SS with 2x100MVA Auto Transformers (to be supplied by TANTRANSCO) at Marichilambu and 110KV bay extension work at existing Kalimandayam 110KV SS in Madurai Region under total turnkey basis

Schedule A1 - Civil

Schedule A2 - Supply

Schedule A3 - Erection

GST Amount (Total GST Amount @18%)

Item Rate BoQ

BoQ_Ver4.0

Specification No: T-2359

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE A1- CIVIL (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Design, engineering of control Room building foundation, including design calculation for analysis of entire control Room building and foundation, Electrical layout drawing etc. coMplete.

Hard Gravelly soil SS 20B

SDR NOT REQUIRING BLASTING

MR & DMR NOT Requiring BLASTING

SDR REQUIRING BLASTING

ReMoval of Hard rock by wedging and chiselling

levelling the site

Providing anti terMite treatMent in 4 stages I) iMMediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of baseMent upto 1.0M alround the building using BIFLEX-C terMite 250Ml for 10lit of water etc. coMplete.

Supplying and filling M. sand for foundation and baseMent including watering and consolidation in 15 cM layers including cost of sand all labour lead lift etc. coMplete

Plain ceMent concrete M10,Mix using 12 to 20MM HBG Metal for foundation without forMwork including cost of ceMent, all Materials, labour, lead, lift, etc. coMplete.

RCC M20 Mix using 12-20MM graded hard Machine broken granite stone, including cost of all Materials, forM work, centering, curing, all labour charges, lead, lift, etc. coMplete. But excluding cost of steel reinforceMent. For raft concrete.

Upto Ground floor roof

RCC M20, Mix using 12-20MM graded hard Machine broken granite stone, including cost of all Materials, forM work, centering, curing, all labour charges, lead, lift, etc. coMplete. But excluding cost of steel reinforceMent- for Grade beaM/plinth beaM

Ground floor

a) Ground floor

a) Ground floor

RCC M20,Mix using 12-20MM graded hard Machine broken granite stone, including cost of all Materials, forM work, centering, curing, all labour charges, lead, lift, etc. coMplete. But excluding cost of steel reinforceMent. For Roof slab concrete 150MM Tk.(Ground floor)

RCC M20, Mix using 12-20MM graded hard Machine broken granite stone, including cost of all Materials, forM work, centering, curing, all labour charges, lead, lift, etc. coMplete. But excluding cost of steel reinforceMent. For precast cover slab concrete.

Providing steel reinforceMent for RCC works including cost of steel rod binding wire and placing in postion of the steel reinforceMent all Materials, lead and lift etc., coMplete.

a) Ground floor

Brick work in CM 1:3 using II class chaMber burnt bricks for partition wall, including cost of all Materials, all labour charges, lead, lift, etc. coMplete.

Plastering with cM 1:5, 12MM thick for walls including cost of ceMent, all Materials,curing, labour, lead and lift etc., coMplete.

Plastering with cM 1:3, 12MM thick for ceiling, beaMs, sunshade including cost of ceMent, all Materials,curing, labour, lead and lift etc., coMplete.

Providing weathering course over roof slab with PCC 1:2:4 using 6MM chips and CM the ratio of PCC 1:2:4 to an average thickness of 100 MM and to required slop and providing one course of cool roof tiles of size 305x305x7 MM Set in CM 1:3 Mixed with crude oil 10% by weight pf ceMent and pointing with CM 1:3 Mix with crude oil(Including water proofing treatMent over roof to prevent leakage)

DaMp proof course using ceMent Mortar 1:3 20MM thick with water proofing coMpound including cost of all Materials lead lift etc. coMplete.

Painting the inside walls with two coats of best quality interior eMulsion of approved colour over a interior priMer coat of all Materials, etc., coMplete.

Painting the ceiling walls with two coats of white ceMent of approved colour over a priMer coat of all Materials, etc., coMplete.

Painting the outside walls with Exterior EMulsion white ceMent priMer coat of approved colour and quality including cost of all Matreials, lead and lift etc., coMplete.

Providing and laying in position of ceraMic acid resistant tiles over a bed of 20MM thick CM1:3 including pointed with acid resistant C.M for flooring in battery Room, including cost of all Materials, Polishing, labour, lead & lift etc. coMplete.Tiles 305 x 305 x 6MM

Flooring with Eurocon tiles 20MM Tk. Of approved quality eMbedded in CM 1:3, and pointing with saMe coloured grout powder For portico including cost of ceMent, all Materials,curing, labour, lead and lift etc., coMplete.

Flooring with approved joint free vitrified tiles 600x600MM of approved Quality, design & colour (Johnson or equivalent Make)laid in ceMent Mortar 1:3 -20MM thick including pointing with saMe coloured ceMent using 0.4Kg/Sqm, finishing the joints, including cost of all Materials, labour, lead, lift, etc. coMplete.

Supply and fixing granite stone colour including cost of all Materials labour lead lift etc. coMplete.

Supply and fixing in position of double leaf anodised aluMiniuM glazed Main door using door outer fraMe 101.60 x 44.45 x 2.10MM @ 1.608Kg/M and door inner fraMe side and vertical 53.70 x 44.45 x 2.30MM @ 1.238 Kg/M, door bottoM section 83.50 x 44.45 x2.40MM@ 1.679Kg/M and diveder and top of door fraMe 47.62 x 44.45x 2.17 MM@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60MM @ 0.083 Kg/M with std.quality hydraulic floor spring, autoMatic door closure, rubber beedings, hinges, handle, etc., with 5.50MM thick sun cool glass, etc., coMplete. Double leaf Main door

Supply and fixing in position of anodised aluMiniuM partially glazed single leaf door using outer fraMe 101.60 x 44.45 x 2.10MM @ 1.608Kg/M and door inner fraMe side and vertical 53.70 x 44.45 x 2.30MM @ 1.238 Kg/M, door bottoM section 83.50 x 44.45 x2.40MM@ 1.679Kg/M and diveder and top of door fraMe 47.62 x 44.45x 2.17 MM@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60MM @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, autoMatic door closer etc, and with 12MM tk. one side laMinated board at bottoM half portion and top half portion with 5.50MM thick sun cool glass including cost of all Materials, lead, lift, etc, coMplete Single leaf door

Supply and fixing of solid PVC door with fraMe Made out of rigid therMo vinyl polyMer extruded section ofsize 62MMx51MM with 2MM wall thickness,shall be reinforced with special polyMeric rods of size 255MMx30MMx25MM and with EPDM gaskets along the fraMe. The door shutter fraMe of 40MM thickMade out of one piece Moulded rigid therMo vinyl polyMer extruded sectionof size 25MMx40MM with 2MM wall thickness is Mitered and joinedat corners by stainless steel/ aluMiniuM screws. The infill of the door shutterconsists of a seaMless one piece MultichaMber hollow rigid therMo vinyl polyMer sectionof size 762MMx35MM with 1MM wall thickness and with prelaMinated glossy finish on either side of door shutter of suitable size including cost of all Materials lead lift etc., coMplete. .

Supply and fixing in position of anodized aluMiniuM glazed sliding window as per ISS 1038-1958 (1245 ISS) using aluMiniuM sections window fraMe bottoM two track sliding 61.85 x 31.75 x 1.50MM @ 0.909 Kg / M, top & side 61.85 x 31.75 x 1.50MM @ 0.784 Kg / M shutter plain out side 40 x 18 x 1.55MM @ 0.547 Kg /M shutter inner lock 40 x 18 x 1.45 MM @ 0.607 Kg /M shutter runner top & bottoM 40 x 18 x 1.55MM @ 0.547 Kg / M with glazing clips rubber gaskets sliding wheel & 5.50MM thick sun cool glass panelling including cost of all Materials, locking arrangeMents labour, lead, lift, etc., coMplete.

Supply and fixing of AluMiniuM Ventilator fully glazed lover type as per standard specification with approved section for fraMe and glass 4MM thick including cost of all Materials lead lifts labour etc coMplete.

Supplying and fixing of Europian type water cloSet with flushing cistern of Neycer/Parry ware with P"" or "S" trap ,seat cover 15 MM dia connectin hose .2 nos 15 MM dia CP angle valve ,hand shower -1 No. including cost of all Materials ,lead lift etc coMplete as directed by departMent Engineer at site

Supplying and fixing in position IWC ORISSA PAN of size 580X420MM white glazed earthen ware of approved Make & quality with 'P' or 'S' trap conforMing to IS - 2556 Part XII [Parryware or Equivalent] with sand cushion and forMing flooring around the cloast using 40MM broken brick jelly in liMe concrete 1:2:5 [1/liMe, 2/sand & 5/brick jelly] 100MM thick and finishing the top to required slope and giving connection to sewer line including the cost of all Materials, labour, lead, lift, T&P, etc. coMplete.

Supplying and fixing in position white glazed Flat back urinal - Size 455 x 350MM of approved Make and quality [Parryware -Aquaseal urinal or equivalent] and with PVC pipe connection [Kohinoor], 32MM PVC waste pipe [Kohinoor], 12/15MM GM wheel valve ISI, fixing the urinal to the valve with necessary TW plugs, brass screws etc, connecting to the water Main as directed at site including the cost of all Materials abour, lead, lift, T&P etc. coMplete.

Supply and fixing of wash basin of size 560x410MM coloued colour and of approved quality and Make[Parryware or equivalent] with 12/15MM dia brass CP pillar tap [waterMan], 32MM PVC waste pipe [Kohinoor], 12/15MM CP angle cock [ISI], 15MM brass nipple, 15MM nylon connection [Kohinoor] etc. fixing the basin in the wall with GI/Alu. brackets and rag bolt and nut, giving necessary water connection etc., and Mirror with beveled edge fixed with suitable CP brass screws etc., coMplete.

Supplying and filling at 110MM dia, best quality ventilating shaft 3.65M height with PVC cowl at top and fixing in poistion inlcuding cost of all Materials, curing labour, leads and lits etc., coMplete.

Supplying and fixing in position 165 MM dia PVC soil pipe- 6Kg/sq.cM [Finolex or equivalent] with special claMps & PVC shoe at bottoM including the cost of all Materials, labour, lead, lift, T&P, etc., coMplete

Supplying and filling with 40MM HBG Metal in dispersion trench, rain water harvesting pit including cost of Metal, all labour, lead,lift, consolidation etc. coMplete.

Supply and fixing 110MM PVC down fall pipe 4Kg/cM2 avonplast or Finolex Make with required bend, tee and GI wall claMp at 90cM intervals including cost of Materials, labour, lead and lift etc., coMplete.

40 MM DIA PVC PIPE

32 MM DIA PVC PIPE

25 MM DIA PVC PIPE

20 MM DIA PVC PIPE

40 MM DIA

25 MM DIA

Providing and fixing of long body chroMiuM plated heavy duty Metal tap of 12MM size including cost of all Materials, labour, etc., coMplete.

Supplying and fixing in position aluMiniuM partition partly glazed & partly paneled above 12MM thick both side prelaMinated boards [ MDF exterior grade] and 5MM thick Machine frosted float glass 9Modi, saint gobine or Equivalent0 using aluMiniuM box section of not less than 63x38.4x2MM x 1.174Kg/M for vertical @ 955MM c/c approx and horizantals[4Nos] including cost of all Materials, labour, lead, liftT&P etc. coMplete.

Fabrication,Supplying and fixing in position of ladder using GI angle and 16MM dia GI rods of width 45cM including welding, cost of all Materials, labour, lead and lift etc., coMplete.

S Type chair (Local rate)

Three drawer steel table with SunMica top of size 1200x750x750MM

Steel side rack open type 1100x400x1200

Steel half bench 1200x400x600MM

Revolving Chair

Operator Table 6'x5'

PVC Nylon chair of approved quality

Cast IRON 0.45x 0.45

Concrete (FRC ) 0.60 x 0.60 M

Fabrication & erection of NaMe Board of vinyal sticker laMinated in alco panel using 18 gauge M.S. sheet with outer in suitable angle and stiffener at the rear side of MS flat supported on M.S. channel ISMC height froM the G.L. and 1M.

Supplying and fixing in position sun control polyester fliM, reflective type 75 Microns thick (gareware or equivalent )including the cost of all Materials, labour, lead, lift, T&P, etc. CoMplete.

Providing false ceiling by using 12.50MM thick perfonated gypsuM board in panels using 6MMGI rod suspender ,16 gauge aluMiniuM "T" and "L" including all Materials, labour, lead and lift etc., coMplete.

Supplying and fixing the naMe / designation stickers in doors identifying the Rooms including cost of Material, labour etc. coMplete.

Providing locking arrangeMents with 6 lever Godrej lock with 3 keys including cost of all Materials, labour, lead and lift etc., coMplete.

Providing Sintex water tank of capacity of 1000 lits including cost of Material, labour, lead, lift, transportation and placing in position over head Room etc., as directed by the engineer at site.

Supplying and fixing in position of ChroMiuM coated hand rail of 75MM pipe to height of 1000 MM and support of 25MM above square / round including cost of all Materials, labour, lead, lift, T&P etc. coMplete.

Providing shoring and shuttering using CW planks and scantlings including cost of all Materials labour lead lift etc. coMplete

Dewatering during the earthwork excavation including cost of all Material,labour, lead, lift etc.,

Providing casing pipe line for laying cable to breaker plinths with 110 MM dia PVC pipe 6 Kg/cM2 including all specials and cost of all Material, lead, lift, etc., coMplete as per standard specification.

Supplying and fixing black granite stone Engraved Foundation detail and year of construction fixing in wall at entrance, Digital wall clock 2 Nos, floor coir Mat 2000x600 for Entrance 1000x500 - 2 No. for office of approved Make and quality including the cost of all Materials, leads, lifts etc., coMplete

Supply, Transport & fixing of GI angles for cableduct splitting the fixed end of angle for anchorage and placing in position as directed by the engineer at site including cost of angles including cost of Material, all labour, lead, lift, etc. coMplete.

Refilling the foundation pits of towers ,building etc .with excavated earth other than sand in layers of 150MM thick, including charges for spreading watering, consolidation as per standard speclification and as directed by the Engineer at site including all labour charges lead and lifts etc., coMplete.

Fixing of bore well point by well qualified geologist labour T & P including all lead lift etc coMplete as directed by the departMent engineer at site.

upto 100 Mtrs

beyond 100 Mtrs

Supply and delivery of 165 MM dia PVC 6 Kg /cM2 Casing pipe as per ISI Standard Specifications and as directed by TNEB Engineers at Site.

Supplying and erection of three phase 5 HP SubMersible Multi-stage (30-40 stage) electrical Motor and puMp of approved ISI brand with non-return valve, adoptor, nylon rope and all related accessories as per IsI in all respect including necessary switch board with 3 Nos. test laMp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T Make panel board with AMp. & Volt Meters with guard and providing earthing to Main with no. 8 tinned copper rod and 6' long 40MM dia GI pipe for earting and earth pit filled with charcoal and salt as per standard spectification labour charge for erection of subMersible puMp and Motor including cost of all Materilas lead and lift etc, coMplete as driected by the departMent engineer at site.

Supplying & fixing of 40MM dia. U- PVC Heavy duty pipe with RED COLOUR MARK of equivalent ISI Make for suction inside the borewell with supporting claMp including cost of all Materials, labour, lead & lift etc., coMplete as driected by the departMent engineer at site.

Supplying & wiring with 2x4 SqmM.flat type subMersible cable of Make FINOLEX, V-GUARD or other approved ISI Make for connecting the subMersible Motor and to the panel board and claMping with the PVC pipe with suitable claMps inside the borwell including cost of all Materials, labour, lead & lift etc., coMplete as directed by the departMent engineer at site.

Supplying and laying 20MM dia B Class GI pipe connecting borewell to Motor including earthwork excavation, refilling necessary fittings, all Materials, labour, lead and lift etc., coMplete as directed by the departMent engineer at site.

Supply and erection of 40MM dia HDPE hose in black colour having ISI Mark and as per IS 4984 -84,40MM dia (10 Kg/CM²) in and outside of the bore well including cost of all Materials, labour, lead,lift etc., coMplete.

Supplying and fixing for PVC casing pipe (with slots or without slots) in the drilled hole including jointing the pipes with paste etc. coMplete, including supplying and packing the annular space with pebbles of size and quality approved by the engineer at site.

Labour charges for developing the Bore well with air coMpressor of 600 CFM capacity (MiniMuM 8 Hour) including transportation labour and fuel charges for coMpressor as directed by TNEB officers and conducting yield test by V.NOTCH Method

Providing 1/18 Multistrand copper wire for water level indicator quality including cost of all Materials, labour, lead, lift etc. coMplete.

Labour charges for reaMing froM 150/140MM dia. Pilot bore to 300MM dia. Bore as directed by the TNEB engineer etc. coMplete.

Wiring with 2 x 1.5 SqmM (22/0.3) PVC insulated SC unsheathed Multistrand Copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3MM thick hyluM sheet cover with Steel switch box and 5A F.T switch with continuous earthwire connection of 14 SWG TC wire for Making good of the concealed portion with suitable colour for PVC concealed light point / fan point (SD 22)

Supply and run of 2x1.5 SqmM (22/0.3) PVC insulated Multistrand unsheathed copper conductor of 1100 V grade. (SD 67)

Wiring with 2 x 4 SqmM (56/0.3) PVC insulated Multi strand unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150 MM x 100 MM x 113 MM Steel switch box with 3 MM thick hyleM sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and Making good of the concealed portion, with suitable colour for concealed power plug point. (SD 38)

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16 A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron fraMe work. (SD 167)

Supply and fixing of 32 A TPNMC switch on suitable angle iron fraMe work with MS cable entry box with earth connection only. (SD 158)

Supply and run of 4 of 4 SqmM (56/0.3) PVC insulated Multi strand unsheathed copper conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. (SD 58)

4 X 28w Single Industrial type fitting

Supply and fixing of 4' 28 W single industrial type flu. fitting coMplete with Electronic choke and condenser with conduit pipe suspension froM the ceiling with PVC unsheathed copper leads froM the terMinals to the fitting with flu. tube. (SD 87)

Supply and fixing of 4'x28 W Twin type Mirror optic suspension type fitting (Philips /CroMpton / Wipro) coMplete with louvers cover coMplete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads froM the terMinals to the fittings with flu. tubes. (SD 91)

Supply and fixing of W.T bulk head fitting (Philips / Bajaj / K.Lite / CroMpton Greaves) suitable for CFL laMp with guard and 1No 36 W CFL bulb.

Supplying and fixing of 2 x 36 W FTL Street light fittings croMpton Make (SFE 1624 HSBN) including cost of all Materials, labour, lead, lift etc., coMplete, as per standard specification.

Supply and fixing of fancy glass shade and 18 W CFL for BH point. (SD 77)

Supply and fixing of 1400 MM (56") AC ceiling fan coMplete with stepped electronic 300 W regulator with 300 MM down rod on the existing claMp. (SD 107)

Supplying and fixing of 1200MM sweep AC ceiling fan with electronic requlator with 300MM down rod on the existing claMps of approved quality of CroMpton/Rally/ usha/bajaj including cost of all Materials lead lift etc coMplete.

Supply and fixing of 375 MM (15") sweep (heavy duty) AC exhaust fan coMplete with necessary wall opening and Making good of the wall. (SD 112)

Supplying and fixing of RCCB safe trip of appd LEGRAND , ISI Make , 25aMps with suitable box including cost of all Materials labour, lead, lift, etc., coMplete as per standard specification.

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoMing and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and Making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI Mark (like standard Make). (SD 173)

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 MM coMplete with necessary Masonry work. (SD 228)

Supplying and fixing of split Air Conditioner (3 phase -2 Ton capacity) of approved Make (Dikin or equivalent) with all accessories including stabilizer with reputed Make including cost of all Materials, leads, lift, fixing charges, etc., coMplete as per standared specification coMplete.

Supply and fixing of 32 AMps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC plug) [Legrand (MDS) / Hager (L&T) Make]. (SD 134-B)

Supplying and laying of 4 core 16 SqmM copper control cable including cost of cable, lead, lift, labour charge, etc., coMplete.

Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 AMps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron fraMe work,with earth connections. (SD 169)

Supplying and fixing of 4 pole 32 AMps Isolator 1 No with MCB box 4 pole including terMinal block for testing purpose at relay and CC Room, cost of all Materials, lead, lift, labour charge, etc., coMplete.

Supplying and laying 25 MM dia PVC pipe of approved quality for AC unit water drain pipe including cost of all Materials, lead, lift, labour charge, etc., coMplete.

Supplying and fixing the paver block of 65 MM thick to the foot path of the operational switches inside the 230/110 yard including the cost of all Materials, leads, fixing charges, lifts etc., coMplete

100 MM dia

50 MM dia

Supplying and fixing 5/8" copper tube for connecting AC panel to AC out door unit including cost of all Materials, lead, lift, labour charge, etc., coMplete.

Laying fixing if Controflex coMpound in around ventilator for protection of rain water.

Providing rain water recharge bore holes by drilling of 300 MM dia bore hole 6.00 M depth and filling the holes with hard broken stone of size 40 M as directed by engineer at site including the cost of all Materials, lead, lift, labour, T&P etc coMplete.

Supplying and fixing of 100mm dia. stoneware pipe with open joint and covered with pan tiles including all cost of materails lead lift etc complete.

Supplying and fixing in position of best quality mirror (22" x 16") with aluminium frame over wash basin including cost of all materials labour, lead, lift, etc. complete as directed by the engineer at site

Supplying and fixing of approved quality of aluminium towel rod with powder coating of size (2 ft) and fixing the same over teak wood round block and soap tray (PVC) in bath Room including cost of all materials lead lift labour etc complete as directed by department Engineer at site

Supplying and fixing of PVC shower and Nickle control valve complete

Supply & fixing marble partition of 25 mm thick 600 mm wide and 1200 mm high including necessary cement mortar with white cement concrete for urinals as directed by department Engineer at site

Supplying, Fixing of buzzers with 5A bell push switch etc complete.

Providing opening for cable,Exhaust fan AC duct, water pipe line etc in brick work/RCC in building and retaining wall& cble duct including cost of machinaries labour etc complete

Brick wall

Painting with two coats of approved enamel paint over one coat of primer for all M.S door window ,gater etc. including cost of all materilas,labour ,lead and lift etc. complete.

Providing projected border of 7.50cm width on top of parapet wall in CM 1:3 mix 12mm thick including cost of all material labour, lead, lift, curing etc., complete.

Providing projected border of 20cm. width for plinth beam in CM. 1:3 20mm thick including cost of all materials, labour, lead, lift, etc., complete.

Providing PVC door bend 50mm dia including fixing in position cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing 100 x 50mm PVC floor trap in bath Room with one pvc door bend shoe of 50mm.dia including cost of all etc., complete

Supplying and fixing 110mm dia PVC.Bend including cost of materials, labour lead lift, etc. Complete

Supplying and fixing 110mm dia Pvc TEE including cost of materials, labour lead lift, etc. Complete

Supplying and fixing of two side polished 20 -30mm tk.cuddapah slab for cupboard etc., including cost of all materials, labour, lead, lift, etc., complete

Supplying and fixing musical quartz type Wall Clock of size 30 x30 cm of approved quality and colour including transport, fixing charges etc complete.

Manufacturing and fixing of pull & push type rolling shutter of 18 gauge as per standard specification and as directed by engineer in charge at site with all locking and etc. arrangements including cost of all materials,all, lead , lift etc. complete

Providing decorative terracotta tiles over CM 1:3,20 mm and pointed with white cement including cost of all materials lead ,lift etc., complete.

Supplying and filling of RCC jolly for head Room including cost of all materials lead ,lift etc., complete.

Supplying ,filling & spreading of good quality gravel layer by layer with proper consolidation for control Room including cost of all materials ,labour, lead., lift etc.Complete.

Supplying and fixing of Name Board letter in brass including cost of all materiales lead lift etc as directed by engineer and approval .

suppling and fixing of Vertical Blinds (all window)and all accessarious materiales including all labour lead lift etc., complete.

Supply and fixing 10mm thick plain glass including all materials lead lift etc., complete. (For control Room ).

supplying and fixing fire rated (twoHoures) door as approved make including cost of all materials lead lift etc., complete.

Finishing the floor with 20mm thick cement concrete using 3 to 10mm stone chippings (Ellis pattern first sort -no sand to be used) including cost of all materials, labour, lead, lift etc. complete.

Supplying and fixing of stainless steel hand rails for stair case using 20mm size square rod for support and grill and top position MS flat of 40x8mm size with suitable anodised aluminium hand rail with PVC sheet covering including cost of all materials, fixing charges, transport welding if necessary, painting with suitable colour lead lift etc., complete for 1.00 m

Supply and erection of T1S tower,T4/T5,C3S/C4 with B&G & F-booms for the Establishment of Thumbalapatti (Palani) 230/110 kV SS at Marichilambu.

Assembling of T1S/T5/T4 type tower template with stubs & cleats to correct level and alignment including shifting of template from Location to location and reassemblilng etc including cost of all labour, lead ,lift etc, complete.

Supply and Fabrication of foundation bolts including providing L angle at bottom and threading at top and galvanizing the top of bolt including cost rod, 3 nos nuts and necessary plate washer ,lead,lift,all materials, labour lead lift etc. complete..

Labour charges for setting of template set for T1S/T5/T4 type columns foundation as per standard drawing and aligning and fixing in position bolts fixing, etc including cost of all labour lead and lift etc complete

Supplying, transport and erection of GI tower angles for "C&T" type towers, ISI GI Bolt&Nut and washer as per ISbooms and all other lattice structure including cost of all materials for G.I angles, hot tip galvanising, all labour, lead, lift, etc. complete.

Tower parts

Bolt&Nuts

Tower Foundation : Earth work excavation for foundation including all labour charges including initial lead, lift, etc. complete.

Hard Gravelly soil SS 20B

SDR NOT REQUIRING BLASTING

MR & DMR NOT Requiring BLASTING

MR & DMR Requiring BLASTING

Removal of Hard rock by wedging and chiselling

Plain cement concrete M10 mix, using 12 to 20mm HBG metal for foundation without formwork including cost of cement, all materials, labour, lead, lift, etc. complete.

RCC M20 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For raft concrete.

RCC M20, mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For column concrete.

Upto Ground floor roof

Providing steel reinforcement for RCC works including cost of steel rod binding wire and placing in postion of the steel reinforcement all materials, lead and lift etc., complete.

Plastering with cm 1:3, 12mm thick for ceiling, beams, sunshade including cost of cement, all materials,curing, labour, lead and lift etc., complete.

Painting the outside walls with two coats of APEX cement paint over a white cement primer coat of approved colour and quality including cost of all matreials, lead and lift etc., complete.

Providing pipe type earthing using 25mm dia G I pipe 3m length including cost of pipe, labour, fabrication of earth strip lead, lift etc. complete.

Refilling the foundation pits of towers ,building etc .with excavated earth other than sand in layers of 150mm thick, including charges for spreading watering, consolidation as per standard speclification and as directed by the Engineer at site including all labour charges lead and lifts etc., complete.

Plinth work: Earth work excavation for foundation including all labour charges including initial lead, lift, etc. complete.

Hard Gravelly soil SS 20B

SDR NOT REQUIRING BLASTING

Supplying and filling m. sand for foundation and basement including watering and consolidation in 15 cm layers including cost of sand all labour lead lift etc. complete

Plain ceoment concrete M10 mix, using 12 to 20mm HBG metal for foundation without formwork including cost of cement, all materials, labour, lead, lift, etc. complete.

Plain cementconcrete M15 mix using 20mm HBG machine crushed metal without form work including cost of all materials, cement, all labour, lead, lift, etc. complete.

Plain cement concrete M15 mixusing 20mm HBG machine crushed metal with form work including cost of all materials, cement, all labour, lead, lift, etc. complete.

RCC M20 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For raft concrete.

RCC M20 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Retaining wall, cable duct side walls etc.,

RCC M20, mix, with 12 to 20mm HBG m/c metal with form work below GL including cost of all materials, cement, all labour, lead, lift, etc. complete.

RCC M20,mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. Grade beam/Plinth beam

RCC M20,mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For precast cover slab concrete.

Providing steel reinforcement for RCC works including cost of steel rod binding wire and placing in postion of the steel reinforcement all materials, lead and lift etc., complete.

Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour lead lift etc ., complete. super structure, including cost of all materials, all labour charges, lead, lift, etc. complete.

a) Ground floor

Plastering with cm 1:3, 12mm thick for ceiling, beams, sunshade including cost of cement, all materials,curing, labour, lead and lift etc., complete.

Painting the outside walls with two coats of APEX cement paint over a white cement primer coat of approved colour and quality including cost of all matreials, lead and lift etc., complete.

Providing and laying PVC high density pipe including cost of all specials like coupling, bend etc., all material labour, etc., complete.

40 MM DIA

32 MM DIA

25 MM DIA

Providing and fixing wheel valve of various diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete.

25 MM DIA

32 MM DIA

Providing and fixing of long body chromium plated heavy duty metal tap of 12mm size including cost of all materials, labour, etc., complete.

Providing shoring and shuttering with country wood scantling at the time of excavation for foundation of towers including cost of all materials, labour, lead, lift, etc. complete.

Supplying, transporting fabrication, fixing Labour charges for fixing of appd quality of MS Rails (90 LBS) for transformer plinth in proper alignment and interconnections the Steelo rails with flat on both ends by welding including cost of rail, all materials labour charges, lead, lift etc. complete, as per standard specification

Supplying and spreading of quarry dust for yard area including cost of quarry dust, labour for consolidation, lead, lift, etc. complete.

Supplying and spreading of 25mm HBG metal for yard area including cost of quarry dust, labour for consolidation, lead, lift, etc. complete.

supplying and fabrication of Foundation bolt with various sizes of required length including threading with 2 nos of GI nuts and washers and fixing in the position as directed by the engineer at site including assembling of template etc., cost of template, all material, labour, lead, lift etc., complete

GI steel

Supply, Transport & fixing of GI angles for cableduct splitting the fixed end of angle for anchorage and placing in position as directed by the engineer at site including cost of angles, cost of painting with aluminium paint two coats over one coat of red oxide primer, all labour, lead, lift, etc. complete.

Supplying and fixing readymade earth collars of size 60 cm inner dia with 30 cm height and shell thickness of 50 mm with cover slab including cost of all materials, transport to site, labour, lead, lift, etc., complete as per standard specification.

Refilling the foundation pits of towers ,building etc .with excavated earth other than sand in layers of 150mm thick, including charges for spreading watering, consolidation as per standard speclification and as directed by the Engineer at site including all labour charges lead and lifts etc., complete.

Removal of surplus earth wherever necessary including transport up to 2 km away from the site, loading and unloading etc., complete

supply and erection of 2 HP Monoblock pump /or suitable capacity for sump to drain out water including cost of suitable GI suction and delievery pipes ,cover for motor ,wiring all labour lead and lift etc.complete.

Providing weep holes including cost of PVC pipes 25/40 mm dia of suitable length ,labour for fixing them in position etc complete

Supplying and spreading of well gravel for low lying area including cost of well gravel, labour for consolidation, lead, lift, etc. complete.

Fabrication, supplying and erection of M.S. grill gate as per standard specification approved by the engineer at site including cost of all materials, welding, painting with two coats of enamel paint over one coat of red oxide primer including cost of all materials, labour, lead, lift, etc. complete.

Hire charges for JCB for levelling the site including cost of hire charges,fuel charges, all labour lead and lift etc. complete.

Providing groutpocket holes includig cost of all labour charges, lead and lift etc., complete.

Labour Charges for uprooting and removing large Mango/Coconut/Neem/ palmyrah stumps as per standard specification complete in all respects

Labour Charges for uprooting and removing small Mango/Coconut/Neem/ palmyrah stumps as per standard specification complete in all respects

Levelling of sub-station and formation of approach road,Providing RCC road over wet mix macadam for the lead road and in and around the 230 Yard, 110 KV Yard, concrete pavement for Transformer Gantry Road and Providing drain sump for the Establishment of Thumbalapatti (Palani) 230/110 kV SS at Marichilambu.

Cutting and Filling in low lying area for levelling the surface including cost of cutting the gravelly soil /soft disintegrated rock with JCB / other machineris, consolidation as per specification & with power roller including all labour lead and lift etc complete.

Earth work excavation for foundation including all labour charges including initial lead, lift, etc. complete.

Supplying and filling M sand for foundation and basement including watering and consolidation in 15 cm layers including cost of sand all labour lead lift etc. complete

Plain cement concrete M10,mix using 12 to 20mm HBG metal for foundation without formwork including cost of cement, all materials, labour, lead, lift, etc. complete.

Plain cement concrete M15,mix using 20mm HBG machine crushed metal with form work including cost of all materials, cement, all labour, lead, lift, etc. complete.

RCC M20 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For raft concrete.

RCC M20, mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Retaining wall, cable duct side walls etc.,complete.

Providing steel reinforcement for RCC works including cost of steel rod binding wire and placing in postion of the steel reinforcement all materials, lead and lift etc., complete.

Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour lead lift etc ., complete. super structure, including cost of all materials, all labour charges, lead, lift, etc. complete.

a) Ground floor

Plastering with cm 1:3, 12mm thick for ceiling, beams, sunshade including cost of cement, all materials,curing, labour, lead and lift etc., complete.

Refilling the foundation pits of towers ,building etc .with excavated earth other than sand in layers of 150mm thick, including charges for spreading watering, consolidation as per standard speclification and as directed by the Engineer at site including all labour charges lead and lifts etc., complete.

Providing and laying Wet Mix Macadam Base course of 250 mm compacted thickness in two layers of 125 mm thick or else specified on the prepared sub-base with IRC 45-2.36mm graded stone aggregate and granular material of quality size and grading in layers as specified, including mixing in Base Mix Plant, spreading in uniform layer with motor grader and compaction with vibrating roller of 80 - 100KN static weight and fine dressing to required grade amd cross slope as directed by dept Engineer at site.

Supply and fixing RCC spun pipe NP 3 for road crossing drains wherever necessary including cost of all material, labour for laying, lead, lift etc. complete as directed by the engineer at site.

600mm dia

300mm dia

Supplying and filling with 1:1 quarry dust 40mm metal for consolidated by power roller 10 T for road and bell mouth including cost of all materials, labour, well consolidation with power roller, lead, lift etc. complete.

Providing concrete road with M 20 GRADE 150 mm thick over using 12 to 20 mm metal including cost of materials leads and lifts etc.complete.

Providing expansion joint for road concrete as per specification in both direction using prevalid aspheltics pad 20 mm thick to full width and depth of 150mm thick plastering with CM 1:3, 20 mm thick including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete.as per standard specification.

Construction of Compound wall for the Establishment of Thumbalapatti (Palani) 230/110 kV SS at Marichilambu. Earth work excavation for foundation including all labour charges including initial lead, lift, etc. complete.

Hard Gravelly soil SS 20B

SDR NOT REQUIRING BLASTING

MR & DMR NOT Requiring BLASTING

Supplying and filling M.Sand for foundation and basement including watering and consolidation in 15 cm layers including cost of sand all labour lead lift etc. complete

Plain cement concrete M15,mix using 12 to 20mm HBG metal for foundation without formwork including cost of cement, all materials, labour, lead, lift, etc. complete.

RCC M20 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For raft concrete.

RCC M20,mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For column concrete.

Upto Ground level

RCC M20, mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement- for Grade beam/plinth beam

Providing steel reinforcement for RCC works including cost of steel rod binding wire and placing in postion of the steel reinforcement all materials, lead and lift etc., complete.

Brick work in CM 1:3 using II class chamber burnt bricks for partition wall, including cost of all materials, all labour charges, lead, lift, etc. complete.

Plastering with cm 1:5, 12mm thick for walls including cost of cement, all materials,curing, labour, lead and lift etc., complete.

Plastering with cm 1:3, 12mm thick for ceiling, beams, sunshade including cost of cement, all materials,curing, labour, lead and lift etc., complete.

Supplying and labour chrges for winding ,tensioning and binding with binding with binding wire of GI barbed wire of 9 rows of horizonntally and vertical layers 30 cm apart as instructed by the engineer at site for fencing including cost of hot dip galvannised barbed wire of TOWA(TYPE - A)of 2.5 mm with difference two busshes 75+(12 mm) with of maximum weight 125-140 gm /m ,alllabour ,lead ,lift ete.complete.

Refilling the foundation pits of towers ,building etc .with excavated earth other than sand in layers of 150mm thick, including charges for spreading watering, consolidation as per standard speclification and as directed by the Engineer at site including all labour charges lead and lifts etc., complete.

Engraving the name of Substation over entance wing wall in both Tamil and English using cement plastering and providing borders, colouring with emulsion paints etc., including cost of all material, labour, lead, lift etc., complete

Providing projected border of 20cm. width for plinth beam in CM. 1:3 20mm thick including cost of all materials, labour, lead, lift, etc., complete.

Fabrication, supplying and erection of M.S. grill for ornamental gate, windows as per standard specification approved by the engineer at site including cost of all materials, welding, painting with two coats of enamel paint over one coat of red oxide primer including cost of all materials, labour, lead, lift, etc. complete.

Item Rate BoQ

BoQ_Ver4.0

Specification No: T-2359

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE A2 - SUPPLY (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Transformers: 22kV/433 V, Station Transformer - 250 KVA - with HG Fuse set, 22kV LAS and GI structure materials complete set 4way FRP/ GI pillar box, 22kV (1250A) Isolator (5No's) with Insulator for Station Transformer with suitably rated RMU with FRTU including suitably rated HT cables between RMU to station Transformer and termination kits and LT supply cable, accessories and arrangement. FO communication cables with necessary media converter for integrity FRTU in RMU with SAS accessories. (With ingress protection IP-52) fencing for 22kV yard with gate as per the instruction of site Engineer

DG SET: 250 KVA, 433 V, 3 Ph Diesel Generator Set with all accessories, battery, exhaust pipes with suitable thermal insulation, AMF panel, power cables & all consumables.

245kV, 2000 A, 50KA/3Sec, SF6 Circiut Breaker 220V DC Control with all accessories including mounting structure G.I.Foundation Bolt and standing ladder arrangements.

145kV, 2000 A, 40 KA, SF6 Circiut Breaker 220 V DC Control with all accessories including mounting structure G.I.Foundation Bolt and standing ladder arrangements.

245kV, 2000 A, 63 KA, 5 Core Single phase Outdoor Current Transformer with Terminal Connectors. G.I.support Structure, Hot Dip Galvanising Steel Foundation Bolt (1No. Junction Box for 3Nos CT's)

145kV, 2000 A, 40 KA, 5 Core Single phase Outdoor Current Transformer with Terminal Connectors, G.I.Support Mounting Structure, Hot Dip Galvanising Steel Foundation Bolt (1No. Junction Box for 3Nos CT's)

245kV, 200 VA, 230KV/√3/110V /√3, 50KA Line Voltage Transformer with Terminal Connectors G.I.Support Structure Hot Dip Galvanising Steel Foundation Bolt (1No. Junction Box for 3Nos LVT)

145kV, 200 VA, 110KV/√3/110 V /√3, Line Voltage Transformer with Terminal Connectors, G.I.Support Structure, Hot Dip Galvanising Steel Foundation Bolt (1No. Junction Box for each LVT)

245kV, 200 VA, 50KA 230KV/√3/110 V /√3, Potential Transformer with Terminal Connectors, G.I.Support Structure, Hot Dip Galvanising Steel Foundation Bolt (1No. Junction Box for 3Nos PT)

145 KV, 200 VA, 110KV/ √3/110V/√3, Potential Transformer with Terminal Connectors, G.I.Support Structure, Hot Dip Galvanising Steel Foundation Bolt (1No. Junction Box for 3Nos PT)

216 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and all accessories G.I.Support Structure Hot Dip Galvanising Steel Foundation Bolt

96 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and all accessories G.I.Support Structure Hot Dip Galvanising Steel Foundation Bolt

245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Brake with Single earth switch- 440V AC Motor operated with 220V DC Control, 1No MOMD for Main Blade and 1No MOMD for earth switch with G.I.Support Structure Hot Dip Galvanising Steel Foundation Bolt, Support Insulator, TC and all accessories complete

245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Brake without earth switch- 440V AC Motor operated with 220V DC Control, 1No MOMD for Main Blade with G.I.Support Structure Hot Dip Galvanising Steel Foundation Bolt with Support Insulator, TC and all accessories complete

245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Brake without earth switch - 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade for Higher elevation with Support Insulator, TC and all accessories complete

145 KV, 2000 A, 40 KA, Horizontal Centre Rotating Double Brake with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade and 1No MOMD for earth switch including G.I.Support Structure, Hot Dip Galvanising Steel Foundation Bolt with Support Insulator, TC and all accessories complete

145 KV, 2000 A, 40 KA, Horizontal Centre Rotating Double Brake without earth switch- 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade including G.I.Support Mounting Structure Hot Dip Galvanising Steel Foundation Bolt with Support Insulator, TC and all accessories complete

M.S.Chequred plate 6mm

M.S.Channel 100*50mm

M.S.Angle 65*65*6mm

M.S.Angle 50*50*6mm

Supply and provision of M8, M10, M12 and M16 (full /Half thread) G.I.bolt and nuts of various sizes including plate/ spring washers as required and as directed by the field engineer.

Steel Bolt and Nut, Spring Washer and Flat washer of reputed make of various size for use to all power connectors

M.S.Flat 75*12mm

M.S.Flat 65*10mm

M.S.Flat 50*8mm

M.S.Rod 40mm

Supply and provision of TERRAC Chemical Compound mixed with site soil in Earth pits for Power Transformer, 5kg per Bag, (Qty Rqt.30kG/ 6m pit). wherever required as directed by the field engineer.

Supply and provision of 12/25x3mm flexible braided copper/ copper flats as required and as directed by the field engineer.

Supply & Crimping of Copper Lugs of Suitable sizes as required and as directed by the field engineer.

Supply and providing of 450-600mm dia, 300mm height, 36mm thick cement collar for identification of earth electrode location as directed by the field Engineer

245kV, Solid core Insulator G.I.Support Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps

145kV, Solid core Insulator G.I.Support Structure Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps

230kV Solid core insulator

110kV Solid Core Insulator

11kV, 120 KN Anti fog Strain Disc Insulator

75mm Dia Aluminium Bus Bar with welding sleeve

50mm Aluminium Busbar

ACSR Zebra Conductor

Armoured Copper Control Cable 14C X 4mm2

Armoured Copper Control Cable 8C X 4mm2

Armoured Copper Control Cable 4C X 4mm2

Armoured Copper Control Cable 20C X 2.5mm2

Armoured Copper Control Cable 14C X 2.5mm2

Armoured Copper Control Cable 8C X 2.5mm2

Armoured Copper Control Cable 4C X 2.5mm2

Armoured Copper Control Cable 2C X 2.5mm2

LT Power cable 4C x 120 sq.mm AL

LT Power cable 4C x 25 sq.mm AL

LT Power cable 2C x 16 sq.mm AL

ADSS-48 fibre optic cable with accessories including erection of ADSS

Armoured Copper Cable 2x35mm2

Control & Protection Panel for 230/110KV Auto Transformers with SAS

Control & Protection Panel for 230KV Feeders 220 V DC

Control & Protection Panel for 230KV Bus Coupler Bay 220 V DC

230 KV Bus Bar Protection Panel 220 V DC

230KV Synchronizing cum Islanding Panel 220 V DC (SAS)

Control & Protection Panel for 110KV Feeders 220 V DC

Control and Protection Panel for 110KV Bus Coupler/section bay

110KV Bus Bar Protection Panel 21 circuits

Supply of Essential Spares for 230kV & 110kV Control & Protection Panels as per CRP & SAS Specification

Testing and complete configuration of SAS

Substation Automation system for 230/110KV AIS (Total-14Bays, 230kV side-5Bays, 110kV side-9Bays

AC Panel for 230kV SS

220V DC, 300AH, Station Battery with Single tier teak wood stand with all accessories

220V, 60A Float/ Boost Battery Charger with Potential free contacts for all indications for SAS interface and Change over switch.

200A DC change over switch with panel (1 panel for 4 Switches)

48V DC Distribution Board with MCB's for 230kV SS

48V DC, 250 AH, Station Battery with stand Single tier and with all accessories

48V, 80 A Float / Boost Battery Charger with Potential free contacts for all indications for SAS interface and Change over switch.

LT 433 V, AC Distribution Board with MCB's with LT Circuit Breaker Control and Change over switch for 400 KV SS

220 V DC Distribution Board with MCB's with one control panel each for change over arrangement of charger supply

Outdoor 433 V AC Distribution Cubic with 20 Nos, 32 A MCB's and 10 Nos, 16 A MCB's, with weather proof FRP cabinet for all equipments/ Isolators.

Outdoor 433 V AC Distribution Cubic with 1No, 200A MCB's and 10Nos, 32A MCB's, with weather proof FRP cabinet for ICT's and Reactors.

Outdoor 220 V DC Distribution Cubic with 30Nos, 32A MCB's with weather proof FRP cabinet for all equipments/ Isolators/ ICT's and Reactors.

Outdoor 433V AC Distribution Cubic with 10Nos, 32A MCB's with weather proof FRP cabinet for LLM.

Supply and fixing of Hylem board 8/10 mm thick wherever required as directed by the field engineer.

HRC Backlite Fuse units 16 AMPS

HRC Backlite Fuse units 32 AMPS

HRC Backlite Fuse units 63 AMPS

32 AMPS - 3 phase, 4 pole

63 AMPS - 3 phase, 4 pole

16 AMPS - single phase, single pole

Regular type (Non-disconnecting)

Disconnecting type (Link type)

Supply, erection, testing and commissioning of 48F OPGW with accessories (Myvadi - Sembatty - 80km, LILO - 1km)

Supply of Standalone 19" Rack Panel for accommodating 4 nos 48 Fibre optic cable with necessary fibre entry provision

Digital Protection coupler including remote end SS(THUMBALAPATTY-4,MYVADI-2,SEMBATTY-2)

Cabinet for Digital Protection coupler including remote SS

Telephony system (Hybrid EPAX with necessary cables for telephony ) (@Thumbalapatty)

Supply of VOIP Telephones wire CAT6 shieided Cable, and associated accessories (Thumbalapatty - 2 & Sembatty - 1)

Self survival stand alone VoIP Gateway,Ethernet switche(s) and assoicated materials for Voice communication (Thumbalapatty,MYVADI,Sembatty)

Telephones (Thumbalapatty - 5 No., Sembatty - 1 No.)

necessary Cables, media converter and assossiated accessories for voice communication connectivity

Fibre Optic terminal equipments (Hybrid Technology) (Thumbalapatty,MYVADI,Sembatty)

Supply of Mandatory Spares and tools for FOTE equipment as per specification

Supply of Mandatory Spares and tools for DTPC equipment as per specification

Supply of Mandatory Spares and tools for Hybrid EPAX and VOIP Gateway equipment as per specification

Double Tension String assembly with strain clamp for Twin Zebra ACSR 225 mm Spacing with 6-bolted tension fitting

Double Tension String assembly with strain clamp for Single Zebra ACSR with 6-bolted tension fitting

Bolted Type Suspension fitting for 230kV Twin Zebra

Bolted Type Suspension fitting for 110kV Twin Zebra

Switch End Clamp for Zebra

Switch End Clamp for Twin Zebra

Switch End Clamp for 75 mm bus bar

Switch End Clamp for 50 mm bus bar

Corona Bell for 50mm Bus Bar

Corona Bell for 75mm Bus Bar

Free end Clamp for 75mm Bus Bar

Free end Clamp for 50mm Bus Bar

Joint Clamp for 75 mm Bus Bar

PG Clamp for Zebra

Reducer Clamp for 75 mm Bus to Zebra

Seating Block for 75mm Busbar

Spacer Clamp for Twin Zebra with 225mm Spacing

T Clamp for 50mm bus to Zebra

T Clamp for Double Zebra to 75 mm Bus

T Clamp for Single Zebra to 75 mm Bus

T Clamp for Twin Zebra to Twin Zebra

T Clamp for Twin Zebra to Single Zebra

T clamp for Zebra to Zebra (C Type fired boltless wedge connector )

Supply and erection of Yard light pole 5.5mtr. Grounting type, stepped tubular pole with Double Bracket with one coat of redoxide and aluminium paint

Supply & Erection of yard light fuse unit mounting box of size 200x200x150mm (BxHxD) out of 18 SWG (1.22mm) M.S Sheet including primer paint as per Drawing including the Supply, Fabrication and Erection of Box fixing Flat using 50x8MSF, Two coat of enamel paints, provided with 16/20A rewirable Porcelain Fuse carrier unit, 16A Bakelite connectors including its cost materials, consumables, frieght, etc and as directed by the fiels engineer on site requirements. (The box shall be vermin proof, shall be provided with sturdy hinges, with provision for cable entry and locking arangements).

Supply and erection of Compact make street light fitting with 150W, 240V CGL/PHILIPS or reputed make LED Lamp.

Supply and Erection of switch yard Lighting & Lightning Master (LLM) as per specification and design including all materials and consumables using LED technology for arriving lux 30 for 230kV SS AIS

Mechanical foam type fire extinguisher trolly mounted 60 Ltrs capacity with complete set with hose and air induction nozzle and all accessories strictly confirming to latest issue of IS 13386/1992 with ISI certification

Mechanical foam type portable 9ltrs capacity fire extinguisher with initial charge complete with chromium plated GI Cap, High pressure nylon braided discharge hose, nozzle and all accessories strictly confirming to latest issue of IS 10204/2001 with ISI certification

Dry chemical Power Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose dry powder level indicator and all accessories strictly confirming to the latest issue of IS specified with ISI certification Fire extinguisher DCP type trolley mounted 25KG capacity with accessories

Dry chemical Power Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose dry powder level indicator and all accessories strictly confirming to the latest issue of IS specified with ISI certification Fire extinguisher DCP type Portable 9KG capacity

Dry chemical Power Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose dry powder level indicator and all accessories strictly confirming to the latest issue of IS specified with ISI certification Fire extinguisher DCP type Portable 6KG capacity

Manufacturing and supply of Fire bucket of 10 litre capacity made out of 26(0.46) SWG MS Sheet painted with white & red enamel paint inside & outside respectively : bottom of bucket shall be U shaped outside of the bucket shall be written as Fire in English & tamil in white enamel paint, including cost of all materials

Manufacturing and supply of sand drum made out of size 580mm dia and 420 mm height with conical cover made out of tin sheet provided with handle including the cost of barrel, sand and consumables as directed by the field engineer

Fire stand suitable to Battery Room

Supply and erection of Fire protection alarm system for Main control room building, Cable gallery with smoke detectors and wherever necessary

Fire fighting equipments Display Boards and first aid safety chart boards as required.

First Aid Box and Artificial Respiration kit as required.

Circuit breaker analyzer multi break kit with DCRM and laptop computer (M/s.Scope make hisac ultima or Equivalent) 6 channel DCRM with all features and functions enabled for tesitng 400kv SS breakers

Hand held AC leakage clamp meter (for mA current measurement range 3mA to 30mA - 30A - 60A) with all standard accessories (fluke 360 leakage current clamp meter)

Ferruling machine letawin LM550A/PC with all spares and standard accessories

Fluke 87V true RMS digital multimeter

Secondary Injection testing kit (0-5A)

Three phase test system for comprehensive power transformer testing omicron make testtrano 600

SF6 gas leakage detector

Fluke 289 True RMS Digital Multimeter (with accuracy upto 4 decimal points)-Rate as per (Sankarapuram)

Phase Sequence Meter(110 V/440 V)

Thermal Image Camera

Digital Earth Resistance clamp on Meter (Megger DET14C)

Digital Insulation Tester (0-5 kV) Megger MIT 525

Basic Tools Kit ( Reputed make DE spanner,Ring spanner, Hammer, Cutting plier, Nose plier ,wire stipper, Crimping tool, etc.,) as directed by the field Engineer

AC Digital Clamp Meter (0-400A)

Transformer Oil BDV testing Kit'Baur' make

Electrical Insulation Anti skid Rubber mat 2000*1000*10mm

Supply and fixing of godrej 6 lever navtol lock with triplicate keys for A.B.Switches and for any other purpose including the cost of ring and key token as directed by the field engineer.

GI Ladder type Cable Tray 2.5m L, 0.3m W and 2mm thickness with coupling plate and bolt nuts

GI Ladder type Cable Tray 2.5m L, 0.45m W and 2mm thickness with coupling plate and bolt nuts

GI Ladder type Cable Tray 2.5m L, 0.60m W and 2mm thickness with coupling plate and bolt nuts

Red oxide Paint of reputed make for painting of all Earth Raisers and MS materials

Aluminium Paint wherever necessary

Anti Corrossive black paint of reputed make for painting of all joints in Earth Raiser connections and Earth mats

Enamel Paint of reputed make of various colours for colour coding painting of Bottom of all structures, equipments and name boards as per field requirement

Reflector sticker of reputed make for colour coding of all equipments and structures

T&P Furniture

PC & Software

Aerial Hydraulic scissor Man Lift Ladder of 15m Height

30feet Aluminium alloy trolley titable tower extension ladder

Aluminium self supporting Ladder 10 feet Length

Discharge rod made of hard PVC, copper flat and 6sq.mm cable

Earth Rod made of hard PVC, copper flat and 6sq.mm cable

Rubber gloves as per IS standard

Rubber gauntlets as per IS standard

Rechargeable high beam torch light as per standard

Digital clock for GPS Time calibration

Portable Emergency Lamp - Rechargable Type

Emergency lamp wall mounted with Battery backup

LED Bulb (20Watts of Higher) for emergency lighting of Control Room

3KVA, UPS for emergency lighting of control room

Supply of Wedge clamp fixing & releasing Kit with accessories

Supply and erection of Visual monitoring system for monitoring complete switchyard and control room for day and night for monitoring of the entire switch yard area and for security purpose.

Supply and fixing of LC/ Key Board/ Earth Mat & Earth Electrode layout of size 3000 X 1500mm out of 75X25mm Alu. Frame embedded with 12mm pre laminated wood particle board using screw on rear 2Nos plain class of 5mm thick fixed with metal roller moving on Aluminium Channel with on front with locking arrangement LG class piece should be fastended on the glass shutters for opening and closing wall clamp made out of 6mm MS plate should be provided on as per drawing along with hook for key with token and as directed by the field engineer including cost of all materials.

Supply & Erection of Identification board for all equipments, earth pits, slogan, danger boards etc.,

110 kV SF6 (outdoor) 40 KA Breaker with support structure.

110KV AB Switch with earth (2000 A)

110KV Solid Core Insulator

110KV Outdoor Single Phase, oil filled, live tank CurrentTransformers of ratio (600-300-150/1A,5 core) with the associated Terminal Connectors and accessories.

110kV CT junction box

110kV Control & relay panel for 110 kV Single feeder without SAS

110 kV Outdoor PT with T.C, without support structure

110kV PT Junction Box

11 kV 120 KN ordinary disc insulators

ACSR Zebra Conductor

75 mm Dia IPS Aluminium Busbar (0.24mt)

Single Zebra ACSR with 6-bolted tension fitting

Switch End Clamp for Zebra

Switch End Clamp for Panther

Switch End Clamp for 75 mm bus bar

Free end Clamp for 75mm Bus Bar

PG Clamp for Zebra

Reducer Clamp for 75 mm Bus to Zebra

T Clamp for Single Zebra to 75 mm Bus

C Type Fired Bolt less Wedge Connectors (without Paddle) suitable for Zebra ACSR Conductor

Supply and Erection of 5m Grouting type lamp post of B class MS pipe (3 inch dia for 3mtrs & 2.5inch dia for 2mtrs)including single/double fitting fixing arrangements,1 inch dia B class pipe arms,yard light box fixing flat and one coat of redoxide and Two coat of Aluminium paint.

Supply and Erection of yard light fuse unit mounting box

Supply and Erection of 1x72W or 2x36W, 240V LED street light Aluminum case fitting ISI- Make as per direction of site engineer.(inclusive of all taxes).

MS Flat 65 x 10 mm

MS Round Rod 40 mm

6mm Chequered plate

MS Flat 50 x 8 mm

MS Channel 100x50

MS Channel 100x50

MS Angle 65x65x6

MS Angle 50x50x6

RSJ pole 200*100mm

14x2.5 sq.mm Copper Cable with w drum

8 X 4.0 sq.mm Copper Cable with w drum

4 x 4 sq.mm Copper Cable with w drum

2 x 2.5 sq.mm Copper Cable with w drum

8 X 2.5 Sq.mm Copper cable with w drum

4 x 2.5 sq.mm Cu Cable with w drum

Rubber Mat

Supply, erection, testing and commissioning of NIFPS for 2 nos of auto transformer

Item Rate BoQ

BoQ_Ver4.0

Specification No: T-2359

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE A3 - Erection (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Labour charges for erection of 100 MVA, 3 phase, 50Hz, 230/110KV YNaod11 Auto Transformer with RTCC Panel and all accessories, Terminal connectors and clamps and with Neutral CT for enabling REF protection and using PLC to control Fans, Pumps and OLTC with RTCC and must be compatible with the SAS System equipments for Nitrogen Injection Fire Protection Systems including FRLS cables, accessories, Heat Sensor for Fire Detectors Spare Nitrogen Cylinder Regulator Assembly.

Labour charges for erection of 22kV/433V, 250KVA Station transformer (including structure) with 4way FRP pillar box and with suitably rated SCADA ready RMU (RRLL configuration) with FRTU including suitably rated HT cable between RMU to station transformer and termination kit and LT supply cable, accessories and arrangements, FO communication cable with necessary media converters for integrating FRTU in RMU with SAS.

Erection, Testing and commissioning of 250kVA, 433V, 3 phase diesel Generator set with all accessories, battery, exhaust pipes with suitable thermal insulation, panel, power cables & all consumables.

Labour charges for erection of 245kV, 2000A, 50KA, SF6 Circiut Breaker 220V DC Control with all accessories, with Terminal connectors and clamps including mounting structure G.I.Bolt and standing ladder arrangements.

Labour charges for erection of 145kV, 2000A, 40KA, SF6 Circiut Breaker 220V DC Control with all accessories, with Terminal connectors and clamps including mounting structure G.I.Bolt and standing ladder arrangements.

Labour charges for erection of 245kV, Single phase Outdoor Current Transformer, Capacitive Voltage Transformer, Potential Transformer with Terminal Connectors and clamps. G.I.support Structure, Hot Dip Galvanising Steel Bolt (1No. Junction Box for 3Nos Measurement Transformers)

Labour charges for erection of 145kV, Single phase Outdoor Current Transformer, Capacitive Voltage Transformer, Potential Transformer with Terminal Connectors and clamps. G.I.support Structure, Hot Dip Galvanising Steel Bolt (1No. Junction Box for 3Nos Measurement Transformers)

Labour charges for erection of 216kV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and clamps and all accessories G.I.Support Structure Hot Dip Galvanising Steel Bolt

Labour charges for erection of 96kV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and clamps and all accessories G.I.Support Structure Hot Dip Galvanising Steel Bolt

Labour charges for erection of 245kV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade and 1No MOMD for earth switch with G.I.Support Mounting Structure with Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

Labour charges for erection of 245kV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break without earth switch- 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade in the elevated tower Structure with Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

Labour charges for erection of 245kV, 2000A, 50KA, Horizontal Centre Rotating Double Break without earth switch- 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade with G.I.Support Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

Labour charges for erection of 145kV, 2000 A, 40 KA, Horizontal Centre Rotating Double Break with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade and 1No MOMD for earth switch including G.I.Support Structure, Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

Labour charges for erection of 145kV, 2000 A, 40 KA, Horizontal Centre Rotating Double Break with out earth switch- 440 V AC Motor operated with 220 V DC Control, 1No MOMD for Main Blade including G.I.Support Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

Heavy section (14kg/m and above)

Light section (below 14 kg/m)

Labour for the Erection of Fabricated steel structures Heavy section (14kg/m and above)

Labour for the Erection of Fabricated steel structures Light section (below 14kg/m)

Labour, machinery, consumables for fabrication, erection of earthmat, earth connection, earth electrode, earthspike (including sharpening of earth spike) including labour for excavating and refilling of earth/ trench for earthmat, cable, etc., of any size/ depth narrow excavation as directed by the field engineer.

Providing Earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth Pits with supply and providing of Bentonite powder (Sodium Bentonite) 5Kg/ Mtr depth of the bore mixed with low resistivity earth as directed by the field Engineer (Earth to be supplied by the contractor)

Labour for erection of 245kV, Solid core Insulator G.I.Support Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps.

Labour for erection of 145kV, Solid core Insulator G.I.Support Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps

230kV Single Conductor Strung Bus/phase

230kV Double Conductor Strung Bus/phase

110kV Double Conductor Strung Bus/phase

75mm (1 length)

75mm (with bend)

50mm (1 length)

Labour for the Erection of Jumper/ Droppers using Moose/ Zebra/ panther Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field engineer.

Labour for the erection of Junction Boxes for CT, PT, CVT, LVT, AC Distribution box, Yardlight box, change over switch including fabrication of clamping arrangements as directed by the field engineer

Simplex type/AC/DC/C&R Panel of Non-Grid type, Battery Chargers, Single feeder Control/ Relay Panels of Grid type (P&C)

Double feeder Control/ Relay of Grid type (P&C)

220V DC, 300AH

48V DC, 400AH

220V DC, 300AH

48V DC, 400AH

Installation, Testing & Commissioning of complete SAS for 230/110kV SS (Comprising 33 Electrical bays, inclusive of training by a registered agency).

Labour charges for laying of LT Alu. UG Power cable 4x25, 4x240 & 4x120 Sq.mm in duct/ trench providing Glands at both ends and termination with necessary sockets as directed by the field engineer.

Up to 8 Core

Labour Charges for laying of Control/ Yardlight cable by digging cable trench of size 0.3 x 0.6m filling with for depth of 0.2m covering with one layer of country bricks and refilling with excavated earth and including cost of sand and bricks etc

Termination of cable core end dressed neatly including the cost of cable socket (lug) ferrules, sleeves, tags, ties, stropes, etc., as directed by the field engineer. (No.of core ends in unit of 1000).

Erection of GI Ladder type Cable Tray of various sizes with coupling plate and bolt nuts including transporting and alignment

Erection of Armoured Fiber Optic Cable with all the accessories for connectivity between Outdoor SAS Process interface panel and control & protection panels, Digital Substation Automation System and wherever required.

Erection and commissioning of ADSS (24 fibre) cable with HDPE pipe and accessories from gandry towers to control room for feeders.

Digital Protection coupler with E1 interface (8 command type) for Thumbalapatti 230 KV SS end - 2Nos and Remote end SS- 2Nos

EPAX - 16S/16T

Supply of paint of reputed make (i.e Asian, Dulux, Nerolec paint) and labour for first primer coat of painting using Red oxide paint including consumables after proper surface preparation using appropriate machinery to remove rust/ scales etc as directed by the field engineer

Supply & Labour charges for two coats of enamel painting in any substation structures, steels, etc and wherever required including the cost of reputed make paints and other consumables as directed by the field engineer.

Labour charges for writing details in any finished surface/ board including cost of enamel paints and other consumables as directed by the field engineer.

Supply and erection of Vinyl Sticker cutting/ Printing on Vinyl Sticker/ Foam board to be used for main equipment, slogan, name board & any other purpose of required sizes as directed by the field engineer.

40mm Dia

50mm Dia

Supply & Erection of Chain link fencing wire as per IS and of size 50-60mm window of 10swg as required and as directed by the field engineer

Labour for the Dismantling of Jumper/ Droppers using Zebra Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field engineer.

Labour for the dismantling of 75 mm (1 Length without bend) Busbar including suitable Modifications of End Clamps, providing holes wherever necessary as directed by the field engineer.

Labour for the Dismantling of 110KV single Conductor Strung bus/phase and all related hardwares, fittings, clamps including Meggering, hoisting of insulators, and consumables and as directed by the field engineer.

Labour, machinery, Consumables for the Fabrication for steel structures.with electricity supplied by Department at free of cost for Heavy section (14 kg/m and above)

Labour, machinery, Consumables for the Fabrication for steel structures.with electricity supplied by Department at free of cost. Light section (below 14 kg/m)

Labour for the Erection of the Fabricated Steel Structures with electricity supplied by Department at free of cost. Heavy section (14 kg/m and above)

Labour for the Erection of the Fabricated Steel Structures with electricity supplied by Department at free of cost. Heavy section (14 kg/m and above)

Labour for the Erection of the Fabricated Steel Structures with electricity supplied by Department at free of cost. Light section (below 14 kg/m)

Labour for the Erection of the Fabricated Steel Structures with electricity supplied by Department at free of cost. Light section (below 14 kg/m)

Labour, machinery, consumables for fabrication, erection of earthmat, earth connection, earth electrode, earthspike (including sharpening of earth spike and earth work excavation and refilling). As directed by the field engineer with electricity supplied by Department at free of cost.

Providing Earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth Pits with supply and providing of Bentonite powder(Sodium Bentonite) 5Kg /Mtr depth of the bore mixed with low resistivity earths as directed by the field Engineer. (Earth to be supplied by the contractor)

Labour charges for providing /placing grouting bolt by template for 110KV breaker, C.T/PT structure, as directed by the field engineer.

Supply of Red oxide & Aluminium paint of reputed make (ie Asian,Dulux,Nerolec paint) and Labour,consumables for first primer coat using red oxide Paint and first finish coat of Painting using Aluminium Paint including consumables, after proper surface preparation using appropriate machinery to remove rust/scales etc as directed by the field engineer.

Supply of Aluminium paint of reputed make (ie Asian,Dulux,Nerolec paint) and Labour for Second coat of Painting using Aluminium paint including consumables etc.,

Supply & Labour charges for two coats of enamel painting in any substation structures, steels, etc and wherever required including the cost of reputed make paints and other consumables as directed by the field engineer.

Labour charges for writing details in any finished surface/board including cost of enamel paints and other consumables as directed by the field engineer.

Labour for erection of 110 KV AB Switch with earth with proper allingments including accessories, Meggering and cost of consumables and lubricants and as directed by the field engineer. with electricity supplied by Department at free of cost.

Labour for erection of Breaker using crane arranged by the Contractor including the cost of gada cloth taflan tape and other consumables including support structure providing holes, gas filling wherever necessary as directed by the field engineer. 110kV Breaker

Labour for erection of Measurement transformers, reactor units, using Crane arranged by the Contractor including providing holes wherever required as directed by the field engineer. 110kV CT's and PT's

Labour for erection of Measurement transformers, reactor units, using Crane arranged by the Contractor including providing holes wherever required as directed by the field engineer. 110kV CT's and PT's

Labour for erection of 110 KV AB Switch with earth with proper allingments including accessories, Meggering and cost of consumables and lubricants and as directed by the field engineer. with electricity supplied by Department at free of cost.

Labour for the Dismantling of 110KV single Conductor Strung bus/phase and all related hardwares, fittings, clamps including Meggering, hoisting of insulators, and consumables and as directed by the field engineer. with electricity supplied by Department at free of cost.

Labour for the Erection of 110kV KV Single Conductor Strung bus/phase and all related hardwares, fittings, clamps including Meggering, hoisting of insulators, and consumables and as directed by the field engineer. with electricity supplied by Department at free of cost.

Labour for the erection of 110 KV Insulator single pole stack for supports Uprights/Underhang including Meggering & other consumables and as directed by the field engineer.

Labour for the erection of 110 KV Insulator single pole stack for supports Uprights/Underhang including Meggering & other consumables and as directed by the field engineer.

Labour for the dismantling of 75 mm (1 Length without bend) Busbar including suitable Modifications of End Clamps, providing holes wherever necessary as directed by the field engineer. with electricity supplied by Department at free of cost.

Labour for the erection of 75 mm (1 Length without bend) Busbar including suitable Modifications of End Clamps, providing holes wherever necessary as directed by the field engineer. with electricity supplied by Department at free of cost.

Labour for the Dismantling of Jumper/ Droppers using Zebra Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field engineer.

Labour for the Erection of Jumper/ Droppers using Zebra Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field engineer.

Labour for the Erection of Jumper/ Droppers using Zebra Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field engineer.

Labour for the Erection of Control Panels like Simplex type/AC/DC/C&R Panel of Non-Grid type, Twin feeder Control/Relay Panels etc., including consumables as directed by the field engineer.

Labour for erection of above 8 core cable in duct/trench/clamping on structures - neat laying in the ducts with identification Tags,Plastic token in all duct corners for easy identification of cables. including fabrication of clamps and fixing at uniform intervals as directed by the field engineer.

Labour for erection of upto 8 core cable in duct/trench/clamping on structures - neat laying in the ducts with identification Tags,Plastic token in all duct corners for easy identification of cables. including fabrication of clamps and fixing at uniform intervals as directed by the field engineer.

Supply and glanding of ISI mark cable gland of 16/19 mm size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer.

Supply and glanding of ISI mark cable gland of 22/25 mm size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer.

Supply and glanding of ISI mark cable gland of 28/32 mm size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer.

Supply and termination of cable core end dressed neatly including the cost of cable socket (lug) ferrules, sleeves, tags, ties, stropes, etc., as directed by the field engineer. (No.of core ends in unit of 1000).

Labour for erection of C.T/P.T junction box.(box supplied by department)

Fabrication,supply&fixing of Earthpit detail board including the cost of 20SWG CR Sheet,10mm RTS Rod ,T &P etc., complete.

Supply and fixing of godrej 6 lever navtol lock with triplicate keys for A.B.Switches & LAS fencing and for any other purpose including the cost of ring and key token as directed by the field engineer.

Supply and fixing of Key chain,ring and identification key token for A.B.Switches as directed by the field engineer.

Supply and erection of Vinyl Sticker cutting/Printing on Vinyl Sticker/Foam board to be used for main equipment, slogan, name board & any other purpose of required sizes as directed by the field engineer.

Supply and fabrication and erection of grout bolt with 20/22 mm rod confirming to IS with proper threading and 2 nos MS Nuts as directed by the field Engineer.

Supply and fabrication and erection of eye bolts with 20/22 mm rod confirming to IS with proper threading and 2 nos MS Nuts as directed by the field Engineer.

Supply and provision of 12/25x3mm flexible braided copper / copper flats as required and as directed by the field engineer.

Labour for Dismantling of steel structures including all consumables. Heavy section above 14 kg/m

Labour for Dismantling of steel structures including all consumables. Light section below 14 kg/m

Labour for Dismantling of 110kV AB switch single unit including monitos, accessories & consumables

Supplying, laying, fixing and pluging with holed end cap in position of PVC pipe of best quality including cutting RCC/Brick work cable duct wherever necessary, cutting PVC pipe, threading, joining with necessary PVC specials, sealing by plaster of paris at Both ends including cost of all materials lead lift labour, earthwork excavation wherever necessary. (100mm PVC Pipe)

Transport of alloted (2 nos) Transformers to the propossed Thumbalapatty SS

Solar panel as per Specification

Please Enable Macros to View BoQ information