SUPPLY CUM ERECTION OF

Amount

(PART-A)

SUPPLY OF PIPING ITEMS:

FOR U/G PIPING:

"Supply , taking over" as defined in the specifications, handling, loading/unloading, transportation, unloading and Laying of bare/coated line pipes and other materials like valve, fittings, flanges & TPI inspection etc. from Contractors suppliers locations/works etc. to Contractor's stock yard/workshop/work-site including preliminary activities, preparation of drawings, wherever required for crossing etc. Handling, stacking, stringing of the UG pipes, Carrying out inspection of materials including line pipes at the time of laying/ installation of line pipes, associated valves, tees, insulating joints, flanges & fittings for buried application of all sizes, thickness & ANSI class rating and accessories as per specification wherever required depending on site condition.Arrangement of all additional lands required for Contractor's storage, fabrication, access for construction, etc. procurement and supply of all materials, consumables, equipment, labour and other inputs, carrying out all temporary, ancillary, auxiliary works, etc.

FOR A/G PIPING:

SUPPLY OF PIPING ITEMS

PIPE SCH 80, PE ,0.5",SMLS,API 5L GR.B,ASME B36.10

PIPE SCHXXS, BE IBR,0.75",SMLS,ASTM A335 GR.P22,ASME B36.10

PIPE SCH160, PE IBR,0.75",SMLS,ASTM A106 GR.B,ASME B36.10

PIPE SCH 80, PE IBR,0.75",SMLS,ASTM A106 GR.B,ASME B36.10

PIPE SCH 80, PE ,0.75",SMLS,API 5L GR.B,ASME B36.10

PIPE SCHXXS, BE IBR,1",SMLS,ASTM A335 GR.P22,ASME B36.10

PIPE SCHXS, THD,1",SMLS,ASTM A106 GR.B,HOT DIP GALV.,ASME B36.10

PIPE SCHXXS, BE IBR,11/2",SMLS,ASTM A335 GR.P22,ASME B36.10

PIPE SCH 80, PE ,11/2",SMLS,API 5L GR.B,ASME B36.10

PIPE SCH 40, BE,2",SMLS,API 5L GR.B,ASME B36.10

PIPE SCH10S,BE ,2",EFW,STR.WELD,ASTM A312 TP304,ASME B36.19

PIPE SCH 40, BE IBR,2",SMLS,ASTM A106 GR.B,ASME B36.10

PIPE SCHXS, THD,2",SMLS,ASTM A106 GR.B,HOT DIP GALV.,ASME B36.10

PIPE SCH 40, BE,2",SMLS,API 5L GR.B,C&W,ASME B36.10

PIPE SCH 40, BE,3",SMLS,API 5L GR.B,ASME B36.10

PIPE SCH10S,BE,3",EFW,STR.WELD,ASTM A312 TP304,ASME B36.19

PIPE SCHSTD, THD,3",SMLS,ASTM A106 GR.B,HOT DIP GALV.,ASME B36.10

PIPE SCH 40, BE,4",SMLS,API 5L GR.B,ASME B36.10

PIPE SCH STD, BE,4",SMLS,API 5L GR.B,ASME B36.10

PIPE SCHSTD, THD,4",SMLS,ASTM A106 GR.B,HOT DIP GALV.,ASME B36.10

PIPE SCH10S,BE,4",EFW,STR.WELD,ASTM A312 TP304,ASME B36.19

PIPE SCH 40, BE,6",SMLS,API 5L GR.B,ASME B36.10

PIPE SCH STD, BE,6",SMLS,API 5L GR.B,ASME B36.10

PIPE SCHSTD, BE,6",SMLS,ASTM A106 GR.B,HOT DIP GALV.,ASME B36.10

PIPE SCH 40, BE IBR,6",SMLS,ASTM A106 GR.B,ASME B36.10

PIPE SCH40S,BE,6",EFW,STR.WELD,ASTM A312 TP304,ASME B36.19

PIPE SCH 20,BE IBR,8",SMLS,ASTM A106 GR.B,ASME B36.10

PIPE SCH120, BE IBR,8",SMLS,ASTM A106 GR.B,ASME B36.10

PIPE SCH 20,BE ,8",ERW,API 5L GR.B,ASME B36.10

PIPE SCH 20,BE ,8",ERW,API 5L GR.B,C&W,ASME B36.10

PIPE SCH10S,BE,8",EFW,STR.WELD,ASTM A312 TP304,ASME B36.19

PIPE SCH 20,BE IBR,10",SMLS,ASTM A106 GR.B,ASME B36.10

PIPE SCH140,BE IBR,10",SMLS,ASTM A106 GR.B,ASME B36.10

PIPE SCH 20,BE ,10",ERW,API 5L GR.B,ASME B36.10

PIPE SCH 20,BE ,10",ERW,API 5L GR.B,C&W,ASME B36.10

PIPE SCH 20,BE,12",ERW,API 5L GR.B,ASME B36.10

PIPE SCH10S,BE,12",EFW,ASTM A358 TP316L CL.1,ASME B36.19

PIPE 44.0 MM,BE IBR,12",SMLS,ASTM A335 GR.P22,ASME B36.10

PIPE SCH 10,BE,14",ERW,API 5L GR.B,ASME B36.10

PIPE SCH 10,BE,14",ERW,API 5L GR.B,C&W,ASME B36.10

PIPE SCH10S,BE,14",EFW,STR.WELD,ASTM A312 TP304,ASME B36.19

PIPE SCH10S,BE,14",EFW,ASTM A358 TP316L CL.1,ASME B36.19

PIPE SCH 10,BE,16",LSAW,API 5L GR.B,C&W,ASME B36.10

PIPE SCH STD,BE,16",LSAW,API 5L GR.B,ASME B36.10

PIPE SCH 10,BE,16",ERW,API 5L GR.B,ASME B36.10

PIPE SCH10S,BE,16",EFW,STR.WELD,ASTM A312 TP304,ASME B36.19

PIPE SCH 10,BE,18",LSAW,API 5L GR.B,C&W,ASME B36.10

PIPE SCH 10,BE,18",ERW,API 5L GR.B,ASME B36.10

PIPE SCH10S,BE,18",EFW,STR.WELD,ASTM A312 TP304,ASME B36.19

PIPE SCH 10,BE,20",LSAW,API 5L GR.B,C&W,ASME B36.10

PIPE 68.00 MM, BE IBR,20",SMLS,ASTM A335 GR.P22,ASME B36.10

PIPE SCHSTD, BE,20",LSAW,API 5L GR.B,ASME B36.10

PIPE SCH XS,BE,20",SMLS,API 5L GR.B,ASME B36.10

PIPE SCH 10,BE,20",ERW,API 5L GR.B,ASME B36.10

PIPE SCH STD, BE,24",LSAW,API 5L GR.B,C&W,ASME B36.10

PIPE 82.00 MM, BE IBR,24",SMLS,ASTM A335 GR.P22,ASME B36.10

PIPE SCHSTD,BE,24",LSAW,API 5L GR.B,ASME B36.10

PIPE SCH 40,BE,24",SMLS,API 5L GR.B,ASME B36.10

PIPE SCHSTD,BE,24",ERW,API 5L GR.B,ASME B36.10

PIPE SCH STD,BE,28",EFW,ASTM A671 GR.CC60.CL32,ASME B36.10

PIPE SCHSTD,BE,30",LSAW,API 5L GR.B,C&W,ASME B36.10

PIPE SCHSTD,BE,30",ERW/SAW, API 5L GR.B,ASME B36.10

PIPE SCH 10S,BE,32",EFW,STR.WELD,ASTM A312 TP304L,ASME B36.19

PIPE SCH XS, BE,42",EFW,ASTM A671 GR.CC60.CL32,ASME B36.10

PIPE SCH XS, BE,44",LSAW,API 5L GR.B,ASME B36.10

PIPE SCH XS, BE,48",LSAW,API 5L GR.B,ASME B36.10

PIPE SCH 10S, BE,20",EFW STR. WELD,ASTM A312 TP304,ASME B36.19

VALVE

GATE VALVE

GATE VALVE 800#,SOCW IBR,3/4",CS BODY ASTM A105,GAV201S

GATE VALVE1500#,SOCW IBR,3/4",CS BODY ASTM A105,GAV204S

GATE VALVE 800#,SOCW ,3/4",CS BODY ASTM A105,GAV201

GATE VALVE 800#,THD,3/4",CS BODY ASTM A105,GAV207

GATE VALVE 800#,SOCW ,3/4",SS BODY ASTM A182 GR F304,GAV501

GATE VALVE 800#,SOCW ,3/4",LTCS BODY ASTM A350 GR LF2,GAV101

GATE VALVE 2500#,BW IBR,3/4",CR-MO BODY ASTM A182 GR F22,GAV305S

GATE VALVE 800#, SOCW,3/4",SS BODY AISI 316L,GAV401

GATE VALVE 800#,SOCW IBR,1",CS BODY ASTM A105,GAV201S

GATE VALVE1500#,SOCW IBR,1",CS BODY ASTM A105,GAV204S

GATE VALVE 800#,THD,1",CS BODY ASTM A105,GAV207

GATE VALVE 2500#,BW IBR,1",CR-MO BODY ASTM A182 GR F22,GAV305S

GATE VALVE 2500#,BW IBR,11/2",CR-MO BODY ASTM A182 GR F22,GAV305S

GATE VALVE 150#,FLG,2",CS BODY ASTM A216 GR WCB,GAV210

GATE VALVE 150#,FLG,3",CS BODY ASTM A216 GR WCB,GAV210

GATE VALVE 150#,FLG,4",CS BODY ASTM A216 GR WCB,GAV210

BALL VALVE

BALL VALVE (FLG),150#,2",CS BODY ASTM A216 GR WCB,BAV210

BALL VALVE (FLG),150#,2",SS BODY ASTM A351 GR CF8M,BAV510

BALL VALVE (FLG),150#,3",SS BODY ASTM A351 GR CF8M,BAV510

BALL VALVE (FLG),150#,8",SS BODY ASTM A351 GR CF8M,BAV520

BALL VALVE (FLG),150#,10",CS BODY ASTM A216 GR WCB,BAV210

GLOBE VALVE

GLOBE VALVE(800#),3/4",CS BODY ASTM A105,GLV201

GLOBE VALVE(800#),3/4",CS BODY ASTM A105,GLV201S

GLOBE VALVE(800#),3/4",SS BODY ASTM A182 GR F304,GLV501

GLOBE VALVE(800#),3/4",LTCS BODY ASTM A350 GR LF2,GLV101

GLOBE VALVE(1500#),3/4",CR-MO BODY ASTM A182 GR F22,GLV305S

GLOBE VALVE(800#),3/4",SS BODY AISI 316L,GLV401

FLANGES (150#)-SO-RF/THD-RF

FLANGE (SO-RF 125 AARH), #150 IBR,3/4",CS ASTM A105,ASME B16.5

FLANGE (THD-RF 125 AARH) ,#150,1",ASTM A105 HOT DIP GALV.,ASME B16.5

FLANGE (SO-RF 125 AARH) ,#150,11/2",CS ASTM A105,ASME B16.5

FLANGE (THD-RF 125 AARH) ,#150,2",ASTM A105 HOT DIP GALV.,ASME B16.5

FLANGE (SO-RF 125 AARH), #150 ,2",CS ASTM A105,ASME B16.5

FLANGE (SO-RF 125 AARH), #150 ,3",ASTM A105 HOT DIP GALV.,ASME B16.5

FLANGE (THD-RF 125 AARH),#150,3",CS ASTM A105,ASME B16.5

FLANGE (THD-RF 125 AARH),#150,4",ASTM A105 HOT DIP GALV.,ASME B16.5

FLANGE (SO-RF 125 AARH) ,#150,4",CS ASTM A105,ASME B16.5

FLANGE (SO-RF 125 AARH) ,#150,6",CS ASTM A105,ASME B16.5

FLANGE (SO-RF 125 AARH), #150 IBR,6",CS ASTM A105,ASME B16.5

FLANGE (SO-RF 125 AARH) ,#150,8",CS ASTM A105,ASME B16.5

FLANGE (SO-RF 125 AARH) ,#150,10",CS ASTM A105,ASME B16.5

FLANGE (SO-RF 125 AARH), #150 IBR,10",CS ASTM A105,ASME B16.5

FLANGE (SO-RF 125 AARH) ,#150,12",CS ASTM A105,ASME B16.5

FLANGE (SO-RF 125 AARH) ,#150,14",CS ASTM A105,ASME B16.5

FLANGE (SO-RF 125 AARH) ,#150,16",CS ASTM A105,ASME B16.5

FLANGE (SO-RF 125 AARH) ,#150,18",CS ASTM A105,ASME B16.5

FLANGE (SO-RF 125 AARH) ,#150,20",CS ASTM A105,ASME B16.5

FLANGE (SO-RF 125 AARH) ,#150,24",CS ASTM A105,ASME B16.5

FLANGES (150#)-WNRF

W.N.FLANGE(WN-RJ IBR),#1500,3/4",CS ASTM A105,ASME B16.5

W.N.FLANGE(WN-RJ IBR),#2500,1",ASTM A182 F22,ASME B16.5

W.N.FLANGE(WN-RF 125 AARH),#150,2",ASTM A182 F304,ASME B16.5

W.N.FLANGE(WN-RF 125 AARH),#150,3",ASTM A182 F304,ASME B16.5

W.N.FLANGE(WN-RF 125 AARH),#150,4",ASTM A182 F304,ASME B16.5

W.N.FLANGE(WN-RF 125 AARH),#300,6",ASTM A182 F304,ASME B16.5

W.N.FLANGE(WN-RF 125 AARH),#150,6",ASTM A105 HOT DIP GALV.,ASME B16.5

W.N.FLANGE(WN-RF 125 AARH),#150,8",ASTM A182 F304,ASME B16.5

W.N.FLANGE(WN-RJ IBR),#1500,10",CS ASTM A105,ASME B16.5

W.N.FLANGE(WN-RF 125 AARH),#150,12",ASTM A182 F316L,ASME B16.5

W.N.FLANGE(WN-RF 125 AARH),#150,16",ASTM A182 F304,ASME B16.5

W.N.FLANGE(WN-RF 125 AARH),#150,18",ASTM A182 F304,ASME B16.5

W.N.FLANGE(WN-RF 125 AARH),#150,28",ASTM A350 LF2 CL.1,ASME B16.47 SR.B

W.N.FLANGE(WN-RF 125 AARH),#150,30",CS ASTM A105,ASME B16.47 SR.B

W.N.FLANGE(WN-RF 125 AARH),#150,32",ASTM A182 F304L,ASME B16.47 SR.B

W.N.FLANGE(WN-RF 125 AARH),#150,42",ASTM A350 LF2 CL.1,ASME B16.47 SR.B

W.N.FLANGE(WN-RF 125 AARH),#150,44",CS ASTM A105,ASME B16.47 SR.B

W.N.FLANGE(WN-RF 125 AARH),#150,48",CS ASTM A105,ASME B16.47 SR.B

W.N.FLANGE(WN-RF 125 AARH),#150,20",SS ASTM A182 F304,ASME B16.5

BLIND FLANGES

BLIND FLANGE (RF 125 AARH),150#,2",CS ASTM A105,ASME B16.5

BLIND FLANGE (RF 125 AARH),150#,3",ASTM A182 F304,ASME B16.5

BLIND FLANGE (RF 125 AARH),150#,3",ASTM A105 HOT DIP GALV.,ASME B16.5

BLIND FLANGE (RF 125 AARH),150#,4",ASTM A105 HOT DIP GALV.,ASME B16.5

BLIND FLANGE (RF 125 AARH),150#,6",ASTM A105 HOT DIP GALV.,ASME B16.5

BLIND FLANGE (RF 125 AARH),150#,8",CS ASTM A105,ASME B16.5

BLIND FLANGE (RF 125 AARH),150#,8",ASTM A182 F304,ASME B16.5

BLIND FLANGE (RF 125 AARH),150#,10",CS ASTM A105,ASME B16.5

BLIND FLANGE (RF 125 AARH),150#,24",CS ASTM A105,ASME B16.5

BLIND FLANGE (RF 125 AARH),150#,30",CS ASTM A105,ASME B16.47 SR.B

BLIND FLANGE (RF 125 AARH),150#,42",ASTM A350 LF2 CL.1,ASME B16.47 SR.B

BLIND FLANGE (RF 125 AARH),150#,48",CS ASTM A105,ASME B16.47 SR.B

BLIND FLANGE (RF 125 AARH),150#,2",SS ASTM A182 F304,ASME B16.5

GASKET(150#)

GASKET (RJ OCT), 1500#,3/4",SOFT IRON,ASME B16.20

GASKET (SPRL-WND RF), 150#,3/4",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20

GASKET (3.0 MM THK RF),150#,1",BUTYL RUBBER,ASME B16.21

GASKET (RJ OCT), 2500#,1",ASTM A182 F5,ASME B16.20

GASKET (SPRL-WND RF), 150#,11/2",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20

GASKET (3.0 MM THK RF),150#,2",BUTYL RUBBER,ASME B16.21

GASKET (SPRL-WND RF), 150#,2",TP304 SS WDG; GPH FLR; TP304 SS INR RNG/ OTR RNG,ASME B16.20

GASKET (SPRL-WND RF), 150#,2",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20

GASKET (3.0 MM THK RF),150#,3",BUTYL RUBBER,ASME B16.21

GASKET (SPRL-WND RF), 150#,3",TP304 SS WDG; GPH FLR; TP304 SS INR RNG/ OTR RNG,ASME B16.20

GASKET (SPRL-WND RF), 150#,3",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20

GASKET (3.0 MM THK RF),150#,4",BUTYL RUBBER,ASME B16.21

GASKET (SPRL-WND RF), 150#,4",TP304 SS WDG; GPH FLR; TP304 SS INR RNG/ OTR RNG,ASME B16.20

GASKET (SPRL-WND RF), 150#,4",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20

GASKET (SPRL-WND RF), 300#,6",TP304 SS WDG; GPH FLR; TP304 SS INR RNG/ OTR RNG,ASME B16.20

GASKET (SPRL-WND RF), 150#,6",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20

GASKET (SPRL-WND RF), 150#,8",TP304 SS WDG; GPH FLR; TP304 SS INR RNG/ OTR RNG,ASME B16.20

GASKET (SPRL-WND RF), 150#,8",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20

GASKET (RJ OCT), 1500#,10",SOFT IRON,ASME B16.20

GASKET (SPRL-WND RF), 150#,10",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20

GASKET (SPRL-WND RF), 150#,12",TP316L SS WDG;GPH FLR;TP316L SS INR RNG/ OTR RNG,ASME B16.20

GASKET (SPRL-WND RF), 150#,12",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20

GASKET (SPRL-WND RF), 150#,14",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20

GASKET (SPRL-WND RF), 150#,16",TP304 SS WDG; GPH FLR; TP304 SS INR RNG/ OTR RNG,ASME B16.20

GASKET (SPRL-WND RF), 150#,16",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20

GASKET (SPRL-WND RF), 150#,18",TP304 SS WDG; GPH FLR; TP304 SS INR RNG/ OTR RNG,ASME B16.20

GASKET (SPRL-WND RF), 150#,18",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20

GASKET (SPRL-WND RF), 150#,24",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20

GASKET (SPRL-WND RF), 150#,30",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20

GASKET (SPRL-WND RF), 150#,32",TP304 SS WDG; GPH FLR; TP304 SS INR RNG/ OTR RNG,ASME B16.20/B16.47 SR.B

GASKET (SPRL-WND RF), 150#,44",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20/B16.47 SR.B

GASKET (SPRL-WND RF), 150#,48",TP304 SS WDG;GPH FLR;TP304 SS INR RNG;CS OTR RNG,ASME B16.20/B16.47 SR.B

GASKET (SPRL-WND RF), 150#,20",TP304 SS WDG;GPH FLR;TP304 SS INR RNG/ OTR RNG,ASME B16.20

STUD & 2NUTS

STUD & 2NUTS HVY HEX,5/8,ASTM A193 GR.B8 CL.2/ASTM A194 GR.8,85

STUD & 2NUTS HVY HEX,5/8,ASTM A193 GR.B8 CL.2/ASTM A194 GR.8,95

STUD & 2NUTS HVY HEX,3/4,ASTM A193 GR.B8 CL.2/ASTM A194 GR.8,110

STUD & 2NUTS HVY HEX,7/8,ASTM A193 GR.B8 CL.2/ASTM A194 GR.8,120

STUD & 2NUTS HVY HEX,1,ASTM A193 GR.B8 CL.2/ASTM A194 GR.8,140

STUD & 2NUTS HVY HEX,11/8,ASTM A193 GR.B8 CL.2/ASTM A194 GR.8,150

STUD & 2NUTS HVY HEX,11/2,ASTM A193 GR.B8 CL.2/ASTM A194 GR.8,255

STUD & 2NUTS HVY HEX,7/8,ASTM A193 GR.B16/ASTM A194 GR.7,145

STUD & 2NUTS HVY HEX,11/4,ASTM A320 GR.L7/ASTM A194 GR.7,220

STUD & 2NUTS HVY HEX,11/2,ASTM A320 GR.L7/ASTM A194 GR.7,285

STUD & 2NUTS HVY HEX,1/2,ASTM A193 GR.B7/ASTM A194 GR.2H,65

STUD & 2NUTS HVY HEX,1/2,ASTM A193 GR.B7/ASTM A194 GR.2H,75

STUD & 2NUTS HVY HEX,5/8,ASTM A193 GR.B7/ASTM A194 GR.2H,85

STUD & 2NUTS HVY HEX,5/8,ASTM A193 GR.B7/ASTM A194 GR.2H,95

STUD & 2NUTS HVY HEX,3/4,ASTM A193 GR.B7/ASTM A194 GR.2H,100

STUD & 2NUTS HVY HEX,3/4,ASTM A193 GR.B7/ASTM A194 GR.2H,110

STUD & 2NUTS HVY HEX,3/4,ASTM A193 GR.B7/ASTM A194 GR.2H,115

STUD & 2NUTS HVY HEX,7/8,ASTM A193 GR.B7/ASTM A194 GR.2H,120

STUD & 2NUTS HVY HEX,1,ASTM A193 GR.B7/ASTM A194 GR.2H,135

STUD & 2NUTS HVY HEX,1,ASTM A193 GR.B7/ASTM A194 GR.2H,140

STUD & 2NUTS HVY HEX,11/8,ASTM A193 GR.B7/ASTM A194 GR.2H,150

STUD & 2NUTS HVY HEX,11/8,ASTM A193 GR.B7/ASTM A194 GR.2H,160

STUD & 2NUTS HVY HEX,11/4,ASTM A193 GR.B7/ASTM A194 GR.2H,180

STUD & 2NUTS HVY HEX,11/4,ASTM A193 GR.B7/ASTM A194 GR.2H,230

STUD & 2NUTS HVY HEX,11/2,ASTM A193 GR.B7/ASTM A194 GR.2H,300

STUD & 2NUTS HVY HEX,11/2,ASTM A193 GR.B7/ASTM A194 GR.2H,310

STUD & 2NUTS HVY HEX,17/8,ASTM A193 GR.B7/ASTM A194 GR.2H,350

STUD & 2NUTS HVY HEX,3/4,ASTM A193 GR.B8T CL.2/ASTM A194 GR.8TA,125

STUD & 2NUTS HVY HEX,1/2,ASTM A193GR.B7/A194GR.2H,HOT DIP GALV.,70

STUD & 2NUTS HVY HEX,5/8,ASTM A193GR.B7/A194GR.2H,HOT DIP GALV.,85

STUD & 2NUTS HVY HEX,5/8,ASTM A193GR.B7/A194GR.2H,HOT DIP GALV.,95

STUD & 2NUTS HVY HEX,3/4,ASTM A193GR.B7/A194GR.2H,HOT DIP GALV.,100

STUD & 2NUTS HVY HEX,1 1/8, ASTM A193GR.B8 CL.2/A194GR.8, 160

ELBOW(1.5D)

ELBOW 90 DEG (3000#),SOCW,1/2",CS ASTM A105,ASME B16.11

ELBOW 90 DEG (3000#),SOCW,3/4",CS ASTM A105,ASME B16.11

ELBOW 90 DEG (3000#),SOCW, IBR,3/4",CS ASTM A105,ASME B16.11

ELBOW 90 DEG (6000#),SOCW,IBR,3/4",CS ASTM A105,ASME B16.11

ELBOW 90(BW IBR),1",ASTM A182 F22,ASME B16.9

ELBOW 90 DEG (3000#),THD,1",ASTM A105 HOT DIP GALV.,ASME B16.11

ELBOW 90 DEG (SCH 40),BW,2",ASTM A234 WPB-SMLS,ASME B16.9

ELBOW 90 DEG (SCH 40),BW IBR,2",ASTM A234 WPB-SMLS,ASME B16.9

ELBOW 90 DEG (3000#),THD,2",ASTM A105 HOT DIP GALV.,ASME B16.11

ELBOW 90 DEG (SCH 10S),BW,2",ASTM A403 WP304-WLDD,ASME B16.9

ELBOW 90 DEG (SCH 40),BW ,3",ASTM A234 WPB-SMLS,ASME B16.9

ELBOW 90 DEG (3000#),THD,3",ASTM A105 HOT DIP GALV.,ASME B16.11

ELBOW 90 DEG (SCH 10S),BW,3",ASTM A403 WP304-WLDD,ASME B16.9

ELBOW 90 DEG (SCH 40),BW ,4",ASTM A234 WPB-SMLS,ASME B16.9

ELBOW 90 DEG (3000#),THD,4",ASTM A105 HOT DIP GALV.,ASME B16.11

ELBOW 90 DEG (SCH 10S),BW,4",ASTM A403 WP304-WLDD,ASME B16.9

ELBOW 90 DEG (SCH STD),BW,6",ASTM A234 WPB-SMLS,ASME B16.9

ELBOW 90 DEG (SCH 40),BW ,6",ASTM A234 WPB-SMLS,ASME B16.9

ELBOW 90 DEG (SCH 40),BW IBR,6",ASTM A234 WPB-SMLS,ASME B16.9

ELBOW 90 DEG (SCH STD),BW,6",ASTM A234 WPB-SMLS,HOT DIP GALV.,ASME B16.9

ELBOW 90 DEG (SCH 40S),BW,6",ASTM A403 WP304-WLDD,ASME B16.9

ELBOW 90 DEG (SCH 20),BW IBR,8",ASTM A234 WPB-SMLS,ASME B16.9

ELBOW 90 DEG (SCH 20),BW ,8",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 90 DEG (SCH 10S),BW ,8",ASTM A403 WP304-WLDD,ASME B16.9

ELBOW 90 DEG (SCH 20),BW IBR,10",ASTM A234 WPB-SMLS,ASME B16.9

ELBOW 90 DEG (SCH 140),BW IBR,10",ASTM A234 WPB-SMLS,ASME B16.9

ELBOW 90 DEG (SCH 20),BW ,10",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 90 DEG (SCH 20),BW,10",ASTM A234 WPB-WLDD,PDIL-PDS-600

ELBOW 90 DEG (SCH 20),BW,12",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 90 DEG (SCH 10 S),BW,14",ASTM A403 WP316L-WLDD,ASME B16.9

ELBOW 90 DEG (SCH 10),BW,14",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 90 DEG (SCH 10 S),BW,14",ASTM A403 WP304-WLDD,ASME B16.9

ELBOW 90 DEG (SCH 10),BW,16",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 90 DEG (SCH STD),BW,16",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 90 DEG (SCH 10S),BW,16",ASTM A403 WP304-WLDD,ASME B16.9

ELBOW 90 DEG (SCH 10),BW,18",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 90 DEG (SCH 10 S),BW,18",ASTM A403 WP304-WLDD,ASME B16.9

ELBOW 90 DEG (SCH XS),BW ,20",ASTM A234 WPB-SMLS,ASME B16.9

ELBOW 90 DEG (68.0MM),BW IBR,20",ASTM A234 WP22,ASME B16.9

ELBOW 90 DEG (SCH 10),BW,20",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 90 DEG (82.0MM),BW IBR,24",ASTM A234 WP22,ASME B16.9

ELBOW 90 DEG (SCH STD),BW,24",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 90 DEG (SCH STD),BW,28",ASTM A420 WPL6-WLDD,ASME B16.9

ELBOW 90 DEG (SCH STD),BW,30",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 90 DEG (SCH 10),BW,32",ASTM A403 WP304L-WLDD,ASME B16.9

ELBOW 90 DEG (SCH XS),BW ,42",ASTM A420 WPL6-WLDD,ASME B16.9

ELBOW 90 DEG (SCH XS),BW ,44",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 90 DEG (SCH XS),BW ,48",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 45 DEG(BW)

ELBOW 45 DEG (SCHSTD),BW,6",ASTM A234 WPB-SMLS,ASME B16.9

ELBOW 45 DEG(SCH20),BW IBR,8",ASTM A234 WPB-SMLS,ASME B16.9

ELBOW 45 DEG(SCH20),BW,42",ASTM A403 WP316L-WLDD,ASME B16.9

ELBOW 45 DEG(SCH20),BW,10",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 45 DEG(SCH20),BW,12",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 45 DEG(SCH10S),BW,14",ASTM A403 WP316L-WLDD,ASME B16.9

ELBOW 45 DEG(SCH10),BW,14",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 45 DEG(SCH10),BW,16",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 45 DEG(SCH STD),BW,16",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 45 DEG(SCH 10),BW,18",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 45 DEG(SCH 10S),BW,18",ASTM A403 WP304-WLDD,ASME B16.9

ELBOW 45 DEG(68.0MM),BW IBR,20",ASTM A234 WP22,ASME B16.9

ELBOW 45 DEG(SCH 10),BW,20",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 45 DEG(82.0MM),BW IBR,24",ASTM A234 WP22,ASME B16.9

ELBOW 45 DEG(SCH STD),BW,24",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 45 DEG(SCH STD),BW,30",ASTM A234 WPB-WLDD,ASME B16.9

ELBOW 45 DEG(SCH10S),BW,32",ASTM A403 WP304L-WLDD,ASME B16.9

ELBOW 45 DEG(SCH XS),BW,42",ASTM A420 WPL6-WLDD,ASME B16.9

ELBOW 45 DEG(SCH XS),BW,48",ASTM A234 WPB-WLDD,ASME B16.9

SOCKOLET(SOCW)

SOCKOLET,SOCW,3000#,2"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW,3000#,2"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW, IBR,3000#,2"X3/4",ASTM A182 F304,MSS SP 97

SOCKOLET,SOCW,3000#,3"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW,3000#,3"X3/4",ASTM A182 F304,MSS SP 97

SOCKOLET,SOCW,3000#,4"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW,3000#,4"X3/4",ASTM A182 F304,MSS SP 97

SOCKOLET,SOCW,3000#,6"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW, IBR,3000#,6"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW,3000#,6"X3/4",ASTM A182 F304,MSS SP 97

SOCKOLET,SOCW,3000#,8"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW,3000#,IBR,8"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW,6000#,IBR,8"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW,3000#,8"X3/4",ASTM A182 F304,MSS SP 97

SOCKOLET,SOCW,3000#,10"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW,3000#,IBR,10"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW,6000#,IBR,10"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW,3000#,12"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW,3000#,14"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW,3000#,14"X3/4",ASTM A182 F304,MSS SP 97

SOCKOLET,SOCW,3000#,14"X3/4",ASTM A182 F316L,MSS SP 97

SOCKOLET,SOCW,3000#,16"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW,3000#,16"X3/4",ASTM A182 F304,MSS SP 97

SOCKOLET,SOCW,3000#,18"X3/4",ASTM A182 F304,MSS SP 97

SOCKOLET,SOCW,3000#,20"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW,3000#,24"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW,3000#,32"X3/4",ASTM A350 LF2 CL.1,MSS SP 97

SOCKOLET,SOCW,3000#,42"X3/4",ASTM A182 F304L,MSS SP 97

SOCKOLET,SOCW,3000#,44"X3/4",CS ASTM A105,MSS SP 97

SOCKOLET,SOCW,3000#,48"X3/4",CS ASTM A105,MSS SP 97

WELDOLET

WELDOLET(BW),6"X2",ASTM A105 HOT DIP GALV.,MSS SP 97

WELDOLET(BW),8"X3",CS ASTM A105,MSS SP 97

WELDOLET(BW),8"X2",CS ASTM A105,MSS SP 97

WELDOLET(BW, IBR),8"X2",CS ASTM A105,MSS SP 97

WELDOLET(BW),10"X4",CS ASTM A105,MSS SP 97

WELDOLET(BW),10"X3",CS ASTM A105,MSS SP 97

WELDOLET(BW, IBR),10"X3",CS ASTM A105,MSS SP 97

WELDOLET(BW),10"X2",CS ASTM A105,MSS SP 97

WELDOLET(BW, IBR),10"X2",CS ASTM A105,MSS SP 97

WELDOLET(BW, IBR),12"X1",ASTM A182 F22,MSS SP 97

WELDOLET(BW, IBR),20"X12",ASTM A182 F22,MSS SP 97

WELDOLET(BW, IBR),20"X3/4",ASTM A182 F22,MSS SP 97

WELDOLET(BW),24"X6",CS ASTM A105,MSS SP 97

WELDOLET(BW),24"X2",CS ASTM A105,MSS SP 97

WELDOLET(BW, IBR),24"X12",ASTM A182 F22,MSS SP 97

WELDOLET(BW, IBR),24"X3/4",ASTM A182 F22,MSS SP 97

WELDOLET(BW),28"X3",ASTM A350 LF2 CL.1,MSS SP 97

THREDOLET

THREDOLET,3000#, THD,6"X3/4",ASTM A105 HOT DIP GALV.,MSS SP 97

TEE(THD),1"X1",ASTM A105 HOT DIP GALV.,ASME B16.11

TEE(THD),2"X2",ASTM A234 WPB-SMLS,ASME B16.11

TEE(THD),2"X2",ASTM A105 HOT DIP GALV.,ASME B16.11

TEE(THD),2"X1",ASTM A105 HOT DIP GALV.,ASME B16.11

TEE(THD),3"X3",ASTM A105 HOT DIP GALV.,ASME B16.11

TEE(THD),3"X2",ASTM A105 HOT DIP GALV.,ASME B16.11

TEE(THD),3"X1",ASTM A105 HOT DIP GALV.,ASME B16.11

TEE(THD),3"X2",ASTM A403 WP304-WLDD,ASME B16.9

TEE(BW),4"X4",ASTM A234 WPB-SMLS,ASME B16.9

TEE(THD),4"X4",ASTM A105 HOT DIP GALV.,ASME B16.11

TEE(BW),4"X2",ASTM A234 WPB-SMLS,ASME B16.9

TEE(THD),4"X3",ASTM A105 HOT DIP GALV.,ASME B16.11

TEE(THD),4"X2",ASTM A105 HOT DIP GALV.,ASME B16.11

TEE(THD),4"X3/4",ASTM A105 HOT DIP GALV.,ASME B16.11

TEE(BW),4"X2",ASTM A403 WP304-WLDD,ASME B16.9

TEE(BW),6"X6",ASTM A234 WPB-SMLS,HOT DIP GALV.,ASME B16.9

TEE(BW),6"X4",ASTM A234 WPB-SMLS,HOT DIP GALV.,ASME B16.9

TEE(BW),6"X3",ASTM A234 WPB-SMLS,HOT DIP GALV.,ASME B16.9

TEE(BW),IBR,8"X8",ASTM A234 WPB-SMLS,ASME B16.9

TEE(BW),8"X8",ASTM A234 WPB-WLDD,ASME B16.9

TEE(BW),8"X8",ASTM A403 WP304-WLDD,ASME B16.9

TEE(BW),8"X4",ASTM A403 WP304-WLDD,ASME B16.9

TEE(BW),10"X10",ASTM A234 WPB-WLDD,ASME B16.9

TEE(BW),IBR,10"X8",ASTM A234 WPB-SMLS,ASME B16.9

TEE(BW),IBR,10"X8",ASTM A234 WPB-SMLS,ASME B16.9

TEE(BW),10"X8",ASTM A234 WPB-WLDD,ASME B16.9

TEE(BW),18"X14",ASTM A403 WP304-WLDD,ASME B16.9

TEE(BW),24"X24",ASTM A234 WPB-WLDD,ASME B16.9

TEE(BW, IBR),24"X20",ASTM A234 WP22,ASME B16.9

TEE(BW),30"X30",ASTM A234 WPB-WLDD,ASME B16.9

REDUCER

REDUCER ECC.,2"x11/2",ASTM A234 WPB-SMLS,ASME B16.9

REDUCER ECC.,3"X2",ASTM A234 WPB-SMLS,ASME B16.9

REDUCER ECC.,4"X3",ASTM A234 WPB-SMLS,ASME B16.9

REDUCER ECC.,4"X2",ASTM A234 WPB-SMLS,ASME B16.9

REDUCER ECC.,4"X3",ASTM A105 HOT DIP GALV.,ASME B16.11

REDUCER ECC.,6"x4",ASTM A234 WPB-SMLS,ASME B16.9

REDUCER ECC.,6"x4",ASTM A234 WPB-SMLS,ASME B16.9

REDUCER ECC.,6"x4",ASTM A234 WPB-SMLS,HOT DIP GALV.,ASME B16.9

REDUCER ECC.,8"X6",ASTM A234 WPB-WLDD,ASME B16.9

REDUCER ECC.,8"X4",ASTM A403 WP304-WLDD,ASME B16.9

REDUCER ECC.,10"x8",ASTM A234 WPB-SMLS,ASME B16.9

REDUCER ECC.,10"X3",ASTM A234 WPB-WLDD,ASME B16.9

REDUCER ECC.,12"x10",ASTM A234 WPB-WLDD,ASME B16.9

REDUCER ECC.,14"X12",ASTM A403 WP316L-WLDD,ASME B16.9

REDUCER ECC.,16"X14",ASTM A403 WP304-WLDD,ASME B16.9

REDUCER ECC.,18"X16",ASTM A403 WP304-WLDD,ASME B16.9

REDUCER ECC.,24"X20",ASTM A234 WPB-SMLS,ASME B16.9

REDUCER ECC.,24"X20",ASTM A234 WP22,ASME B16.9

REDUCER ECC.,24"X20",ASTM A234 WPB-WLDD,ASME B16.9

REDUCER ECC.,24"X18",ASTM A234 WPB-WLDD,ASME B16.9

REDUCER ECC.,20"X18",ASTM A403 WP304-WLDD,ASME B16.9

CAP,3/4,CS ASTM A105,ASME B16.11

CAP,3/4,CS ASTM A105,ASME B16.11

CAP,3/4,CS ASTM A105,ASME B16.11

CAP,1,CS ASTM A105,ASME B16.11

CAP,1,CS ASTM A105,ASME B16.11

CAP,3/4,ASTM A182 F22,ASME B16.9

CAP,11/2,ASTM A182 F22,ASME B16.9

CAP,3/4,ASTM A182 F304,ASME B16.11

CAP,3/4,ASTM A350 LF2 CL.1,ASME B16.11

CAP,2,ASTM A234 WPB-SMLS,ASME B16.9

CAP,8,ASTM A234 WPB-SMLS,ASME B16.9

CAP,8,ASTM A234 WPB-SMLS,ASME B16.9

CAP,3/4,ASTM A182 F304L,ASME B16.11

CAP,3/4,ASTM A182 F316L,ASME B16.11

CAP,12,ASTM A234 WP22,ASME B16.9

CAP,3/4,ASTM A105 HOT DIP GALV.,ASME B16.11

CAP,1,ASTM A105 HOT DIP GALV.,ASME B16.11

CAP,2,ASTM A105 HOT DIP GALV.,ASME B16.11

CAP,3,ASTM A105 HOT DIP GALV.,ASME B16.11

CAP,4,ASTM A105 HOT DIP GALV.,ASME B16.11

COUPLING

COUPLING,1/2,CS ASTM A105,ASME B16.11

COUPLING,3/4,CS ASTM A105,ASME B16.11

COUPLING,3/4,CS ASTM A105,ASME B16.11

COUPLING,3/4,CS ASTM A105,ASME B16.11

COUPLING,11/2,CS ASTM A105,ASME B16.11

COUPLING,1,ASTM A105 HOT DIP GALV.,ASME B16.11

COUPLING,2,ASTM A105 HOT DIP GALV.,ASME B16.11

COUPLING,3,ASTM A105 HOT DIP GALV.,ASME B16.11

COUPLING,4,ASTM A105 HOT DIP GALV.,ASME B16.11

HALF COUPLING

HALF COUPLING,3/4,CS ASTM A105,ASME B16.11

HALF COUPLING,1,CS ASTM A105,ASME B16.11

HALF COUPLING,1,CS ASTM A105,ASME B16.11

NIPPLE

NIPPLE,3/4,SMLS,ASTM A106 GR.B,ASME B36.10

NIPPLE,3/4,SMLS,ASTM A106 GR.B,ASME B36.10

NIPPLE,3/4,SMLS,ASTM A106 GR.B,ASME B36.10

NIPPLE,1,SMLS,ASTM A106 GR.B,ASME B36.10

NIPPLE,1,SMLS,ASTM A106 GR.B,ASME B36.10

NIPPLE,1,SMLS,ASTM A106 GR.B,ASME B36.10

NIPPLE,1,SMLS,ASTM A106 GR.B,ASME B36.10

NIPPLE,3/4,SMLS,ASTM A312 TP304L,ASME B36.19

NIPPLE,3/4,SMLS,ASTM A312 TP304L,ASME B36.19

NIPPLE,3/4,SMLS,ASTM A312 TP316L,ASME B36.19

NIPPLE,3/4,SMLS,ASTM A312 TP316L,ASME B36.19

NIPPLE,3/4,SMLS,API 5L GR.B,ASME B36.10

NIPPLE,3/4,SMLS,API 5L GR.B,ASME B36.10

NIPPLE,3/4,SMLS,ASTM A106 GR.B,HOT DIP GALV.,ASME B36.10

NIPPLE,3/4,SMLS,ASTM A333 GR.6,ASME B36.10

NIPPLE,3/4,SMLS,ASTM A333 GR.6,ASME B36.10

NIPPLE,3/4,SMLS,ASTM A312 TP304,ASME B36.19

NIPPLE,3/4,SMLS,ASTM A312 TP304,ASME B36.19

STEAM TRAP (Refer PMS- Annexure for STEAM TRAP)

STEAM TRAP, 1, 2500#, FLG,

STEAM TRAP, 3/4, 300#, FLG,

STEAM TRAP, 3/4, 150#, FLG,

STEAM MANIFOLD (Refer PMS- Annexure for STEAM MANIFOLD

CONDENSATE MANIFOLD (Refer PMS- Annexure for CONDENSATE MANIFOLD )

SUPPLY OF PIPING ITEMES ON THE BASIS OF WEIGHT BASIS: This SOR item is applicable only when the extra supply items comes with diffrent sizes, which are not included in SOR item "SUPPLY OF PIPING ITEMS" & applicable only after approval of Client/PMC.

PIPING ≤ 2" SIZE

Carbon Steel (Non-IBR)

Carbon Steel (IBR)

Alloy Steel (IBR)

Stainless Steel

PIPING > 2" SIZE

Carbon Steel(Non-IBR)

Carbon Steel (IBR)

Alloy Steel (IBR)

Stainless Steel

Note: This item is applicable for the material & sizes, which are not covered under SOR item "SUPPLY OF PIPING ITEMS" & also applicable for future new upcomming sizes(Extra Items) & applicable only after approval of Client/PMC.

FABRICATION & ERECTION OF PIPING (AG & UG):

FABRICATION & ERECTION OF PIPING(AG):

PIPE: CARBON STEEL PIPING (NON IBR); THK. <= 10MM

FABRICATION (BUTT WELD/THD)

UTPO 1.5 INCH

NB 2 INCH - 6 INCH

NB 8 INCH - 14 INCH

NB 16 INCH - 24 INCH

NB 28 INCH - 36 INCH

PIPE: CARBON STEEL PIPING (NON IBR); THK. > 10MM

FABRICATION (BUTT WELD)

NB 16 INCH - 24 INCH

NB 42 INCH - 48INCH

PIPE: CARBON STEEL PIPING (IBR); THK. <= 10MM

FABRICATION (BUTT WELD/THD)

UTPO 1.5 INCH

NB 2 INCH - 6 INCH

NB 8 INCH - 14 INCH

PIPE: CARBON STEEL PIPING ( IBR); THK. > 10MM

FABRICATION (BUTT WELD)

NB 8 INCH - 14 INCH

PIPE: LT STEEL PIPING ( IBR/NON IBR); THK. > 10MM

FABRICATION (BUTT WELD/THD)

UTPO 1.5 INCH

NB 28 INCH - 36 INCH

NB 42 INCH - 48 INCH

PIPE: ALLOY STEEL PIPING (IBR); THK.<= 10MM

FABRICATION (BUTT WELD)

NB UTPO 1.5 INCH

PIPE: ALLOY STEEL PIPING (IBR); THK. > 10MM

FABRICATION (BUTT WELD)

NB UTPO 1.5 INCH

NB 8 INCH - 14 INCH

NB 16 INCH - 24 INCH

PIPE: STAINLESS STEEL PIPING ; THK. <= 10MM

FABRICATION (BUTT WELD)

NB UTPO 1.5 INCH

NB 2 INCH - 6 INCH

NB 8 INCH - 14 INCH

NB 16 INCH - 24 INCH

NB 28 INCH - 36 INCH

FABRICATION (FILLET WELD)

NB UPTO 1.5 INCH

ERECTION OF PIPING:

CARBON STEEL PIPING (NON IBR); THK. <= 10MM

UTPO 1.5 INCH

NB 2 INCH - 6 INCH

NB 8 INCH - 14 INCH

NB 16 INCH - 24 INCH

NB 28 INCH - 36 INCH

CARBON STEEL PIPING (NON IBR); THK. > 10MM

NB 16 INCH - 24 INCH

NB 42 INCH - 48INCH

CARBON STEEL PIPING ( IBR); THK.<=10MM

UTPO 1.5 INCH

NB 2 INCH - 6 INCH

NB 8 INCH - 14 INCH

CARBON STEEL PIPING (IBR); THK. > 10MM

NB 8 INCH - 14 INCH

PIPE: LT STEEL PIPING ( IBR/NON IBR); THK. > 10MM

UTPO 1.5 INCH

NB 28 INCH - 36 INCH

NB 42 INCH - 48 INCH

PIPE: ALLOY STEEL PIPING (IBR); THK.<= 10MM

NB UTPO 1.5 INCH

PIPE: ALLOY STEEL PIPING (IBR); THK. > 10MM

NB 8 INCH - 14 INCH

NB 16 INCH - 24 INCH

PIPE: STAINLESS STEEL PIPING ; THK. <= 10MM

NB UTPO 1.5 INCH

NB 2 INCH - 6 INCH

NB 8 INCH - 14 INCH

NB 16 INCH - 24 INCH

NB 28 INCH - 36 INCH

UNDER GROUND (U-G) PIPING WORKS:

EARTHWORK

Excavation of trenches for pipelines in all kinds of soil including soft and hard rock mixed in nature both dry and wet conditions including dressing of sides and bottom getting out excavated material in the approved dump yard in all leads of 100 meter including spreding and leveling as per instruction of owner/Consultant.

Same as above but lift from 1.5 Mtr.to 3.0 Mtr.

Providing and filling with fine river sand in trenches a layer of 150 mm from BOP(Bottom of pipe) and 200 mm top of pipes(In case of pipe size>24" NB) and for pipe<24" filling of sand in trenches shall be 150mm from BOP and 100 mm from top of pipe including watering, ramming, consolidating and complete dressing.

Filling with available earth excavated without stones & unwanted materials in the treanches in layer other than Sr. No. III. In depth consolidation each deposited layer by ramming and watering all complete.

Removal or excess excavated materials after back filling of trenchesfrom site of work to other area in factory premises, as directed by ownerand spreading and leveling the same.

Cutting and disposal of paved surface at all level other than 41.11 & 41.12

Cutting and disposal of PCC at all level other than 41.11 & 41.12

Cutting and disposal of RCC at all level other than 41.11 & 41.12

PLAIN CEMENT CONCRETE :

Providing and laying plain cement concrete, machine mixed and mechanically vibrated in foundations, plinth, under floors, etc., excluding all necessary cost of centring and shuttering :

1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size).

1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm and below).

1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm and below).

1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm and below).

REINFORCED CEMENT CONCRETE :

Providing and laying reinforced cement concrete of grade M-30 (using 20 mm. nominal gauge graded stone aggregate) machine mixed and mechanically vibrated and finished to a fair face but excluding the cost of centring, shuttering and reinforcement in foundation and plinth, for rafts, footings, bases of columns, pedestals, beams, walls, columns, slabs, machine and equipment foundations, pile caps, box sections, pipe supports, etc., complete in all respects as per direction of Engineer-in- Charge.

Same as Item No. 41.26, but with concrete of grade M-25.

REINFORCEMENT :

Supplying, cutting, cleaning, straightening, bending, hoisting and placing in position and binding with 18 SWG annealed wire, reinforcement bar of high yield strength Corrosion Resistance Steel with Fe500D properties conforming to IS:1786 with minimum yield strength of 500 N/sq,mm for all R.C.C. works including all necessary handling at all heights and depths complete in all respects and as per direction of Engineer-in-Charge.

FABRICATION & ERECTION OF UNDER GROUND (U-G) PIPING

PIPE: CARBON STEEL PIPING (IBR/NON IBR); THK. <= 10MM

FABRICATION (BUTT WELD)

NB UTPO 1.5 INCH

NB 2 INCH - 6 INCH

NB 8 INCH - 14 INCH

NB 16 INCH - 24 INCH

NB 28 INCH - 36INCH

FABRICATION (FILLET WELD)

NB UPTO 1.5 INCH

LAYING/ERECTION

NB UTPO 1.5 INCH

NB 2 INCH - 6 INCH

NB 8 INCH - 14 INCH

NB 16 INCH - 24 INCH

NB 28 INCH - 36INCH

COATING AND WRAPPING OF UNDERGROUND PIPING:

Supply & Application of all Cold Tape type coating and wrapping materials, manpower, equipments, consumables and necessary arrangements for surface preparation and application shall be in the scope of Contractor. Surface cleaning and preparation shall consist of cleaning and degreasing by Grit / Shot blasting and or power scraping, using most suitable method or a combination therefore, both followed by carefully removal of the dust according to the specification ISO 8501-1: 1988 SA 2.5. The coating continuity shall be visually 100% checked by electric Holiday detector to detect and search of particles and other inclusion, pinholes, cavities, cracks and other ruptures. All defects visually detected or by Holiday detector shall be clearly marked and all defects in the coating shall be made good immediately after their inspection.

COATING AND WRAPPING OF UNDERGROUND PIPING: As per C&W-TS (Attached with NIT DOCS)

Cold Tape Type (Two layer = Inner wrap and Outer wrap.)

ERECTION OF VALVES

FLANGED/SCREWED VALVES

SW/BW VALVES

STEAM/ CONDENSATE MANIFOLD (AS PER ATTACHED ANNEXTURE)

NOTES: 1. WAFER TYPE VALVES shall be treated as flanged valves 2. Above includes valves of all materials, rating, IBR/Non IBR. 3. Above includes all types of valves/ steam traps. 4. Rates are inclusive of Installation/Removal of Control valves or any other type of valve during Pressure Testing/Testing. No extra payment will be made for the same.

RADIOGRAPHY :-The unit rate shall include cost of radiograph viewer and films, consumables, scaffolding, manpower, overheads/profits etc. Payment shall be made only for those films after examination for joints found acceptable as per codes, standards & NIT. Films for defective joints shall not be paid. Overlapping Length of radiography film is not payable.

At outside, the place of erection using film size

3" wide film

4" wide film

In-situ (Erected position) using

3" wide film

4" wide film

NOTES: 1. Length and width of film to be used which shall be decided by Owner before execution of radiography. 2. As a guide line the radiography film shall be used as below: - i) 3" wide film shall be used up to 4" dia pipes ii) 4" wide film shall be used above 4" dia pipes 3. Payment shall be made on the basis of weld length radiographed & for those joints which are found acceptable. 4. Length of radiographed film shall be calculated (O.D. x 3.14) in inch.

STRESS RELEIVING :The unit rate shall include cost of SR, consumables, scaffolding, manpower, overheads/profits etc. Payment shall be made only for those sucessful for examination & found acceptable as per codes, standards & NIT.

At outside, the place of erection using film size

In-situ (Erected position) using

PIPE SUPPORTS

SUPPLY & FABRICATION OF PIPE SUPPORTS

Supply & Fabrication of pipe supports as per drawings, standards, Specifications, NIT conditions & instructions of Owner/Consultant. The rate shall include the cost of materials, consumables, surface preparation & application of primer and painting, labour & overheads/profits etc. Supply & fabrication of all types of supports is in contractor scope.

DETAILS OF PIPE SUPPORTS

CATEGORY,MATERIAL OF CONSTRUCTION

PS 1,Means carbon steel supports.

PS 2,Means alloy steel supports

PS 3,Means stainless steel supports

PS 4,PUF supports for cold lines

PS 5,Means Turn buckles (Forged)

PS 6,Means Spring support

ERECTION OF PIPE SUPPORTS

Erection of supports fabricated by Contractor including primer/painting and/or supplied by vendors.The rate shall include cost of erection as part of piping, making necessary scaffoldings at all elevations, welding , labour, consumables, application of primer and finish paint, casting of civil padstel for trunion supports, casting of civil sleeper supports for piping, overheads/profits etc to complete all related activities as per NIT and instruction of Owner/ Consultant.

PS 1,Means carbon steel supports.

PS 2,Means alloy steel supports

PS 3,Means stainless steel supports

PS 4,PUF supports for cold lines

PS 5,Means Turn buckles (Forged)

PS 6,Means Spring support

Notes 1. Irrespective of whether pipe supports and/or pipe support materials are supplied by Contractor or Owner or Vendor, all fasteners such as bolts, studs, nuts, washers etc., are to be supplied by Contractor at his cost. 2. Preference shall be given to PUF support to be used if required for cold insulation line. 3. Welding for supports shall include preheating and all tests (excluding radiography & stress relieving, which shall be paid separately as per SOR) such as dye-penetrent test, hardness test etc. as required by standards, codes, specifications and instructions of Owner/Consultant. 4. Turn buckles & Spring Supports shall be procured by contactor as per PDIL Engineering Standard. 5. For PUF Supports, density shall be 250 Kg/M3 and dimensions shall be same as for wooden supports. Both the inner and outer diameter surfaces shall have Aluminum facing.

REINFORCING PADS FOR PIPES :- Supply of materials, consumables & Fabrication/erection of reinforcing pads for pipe connection wherever required and erection, fitup, welding & testing (including DP/MP) if required of the same and performing Positive Material Identification(PMI) using alloy analysers as per the specifications, drawings and instructions of the Engineer-in-Charge.

BRANCH WELD WITH RP,24X16,CARBON STEEL,ASME B31.3

BRANCH WELD WITH RP,30X20,CARBON STEEL,ASME B31.3

BRANCH WELD WITH RP,30X14,CARBON STEEL,ASME B31.3

BRANCH WELD WITH RP,30X10,CARBON STEEL,ASME B31.3

BRANCH WELD WITH RP,30X8,CARBON STEEL,ASME B31.3

BRANCH WELD WITH RP,30X2,CARBON STEEL,ASME B31.3

BRANCH WELD WITH RP,48X20,CARBON STEEL,ASME B31.3

BRANCH WELD WITH RP,8X3,STAINLESS STEEL,ASME B31.3

BRANCH WELD WITH RP,8X2,STAINLESS STEEL,ASME B31.3

BRANCH WELD WITH RP,18X8,STAINLESS STEEL,ASME B31.3

BRANCH WELD WITH RP,18X3,STAINLESS STEEL,ASME B31.3

PAINTING

PIPING

Supply & Application of paints and primers as per PDIL TS-2001/Drawings/docs, preparation of surfaces and application of primer and finish paints, identification (Line numbering), lettering, colour bands, colour coding etc. as specified including rubdown and touch up of shop primer wherever required, providing scaffolding for all heights, labour, material, tools and tackles, consumables supervision etc. to complete the work in all respects, drawings and direction of Engineer-in-Charge for all types of uninsulated piping and insulated piping as specified including all pipes, fittings, flanges, supports, valves etc. Surface preparation by blast cleaning and application of first coat of primer (inorganic zinc silicate) shall be done in fabrication yard prior to erection. For insulated piping wherever blast cleaning with no primer application is specified, in such cases finish paints shall also be applied in the fabrication yard. The identification marks of the piping and joints shall be noted before blasting and the same shall be transferred on primed surface with Polyurethane paint or as per the instructions of Engineer-in-Charge. Notes: 1. All joints (fabrication as well as erection joints) shall be left unpainted till hydrotesting. 2. No extra payment shall be made for identification (line numbering etc.) of insulated and uninsulated lines.

UNINSULATED (CS+AS) UP TO 90'C

UNINSULATED (CS+AS) ABOVE 90'C TO 200'C

MODIFICATION/EXTRA WORKS (IF ANY): -

MODIFICATION/EXTRA WORKS (IF ANY) :- Cutting, bevelling, fitup, welding of different sizes of Carbon Steel /Alloy Steel/Stainless Steel piping of all types and thicknessess in shop, in position, on ground/overhead on rack and at all elevations; transportation of pipes, fittings, flanges etc from owner's storage point to work site/ work shop, making necessary scaffoldings, consumables, machinery, tools, tackles, labour, primer, painting and supervision including attending repairs for completing the work as per the instruction of Engineer-in-charge.

FLAME CUTTING C.S PIPING

FLAME CUTTING A.S PIPING

HACKSAW CUTTING C.S PIPING

HACKSAW/ PLASMA CUTTING S.S PIPING

BEVELLING C.S PIPING

BEVELLING S.S PIPING

BEVELLING A.S PIPING

Fit up & Welding C.S PIPING

Fit up & Welding OF S.S. PIPING

Fit up & Welding OF A.S. PIPING

NOTE: 1. Rates shall include for IBR and Non IBR 2. CS shall include GI also 3. For other thickness, the rates shall be increased by direct proportion. 4. Rates for cutting shall include the cost of consumables, labour and other necessary arrangement related with & for this activity.

LETTER STENCILLING

Surface preparation,supply and application of primer and paint on uninsulated equipment, for lettering, stenciling on Pumps, Piping for the purposes of identification (Equipment Name, Equipment Number & Service Description) as per applicable painting specification enclosed elsewhere in the tender document, providing scaffolding for all heights, labour, materials, tools, tackles, supervision etc. to complete the work as per specifications and instructions of Engineer-in-Charge.

Assistance during PRE COMMISSIONING/COMMISSIONING

Skilled (with hand tools, equipment/machinery, consumables): Welder, Millwright Fitter

Semi Skilled (with hand tools): Pipe Fitter, Gas Cutter, Rigger, Electrician (for welding m/c).

Unskilled: Helper, Khalasi.

Note- EA: ONE MAN 8-HRS PER DAY

PART-B (INSULATION)

SUPPLY & APPLICATION OF INSULATION:

HOT INSULATION

PIPING:

PIPING WITH OPERATING TEMPERATURE UP TO 400 DEG C & NOMINAL PIPE SIZE UP TO 14” NB - Supply and application of insulation as per PDIL TS/ES/docs (Mentioned in NIT) including cleaning , all complete with tools, tackles, scaffolding at all elevation, manpower, materials such as aluminium bands, lacing, binding, stitching wire, labours,cleaning , all complete with tools, tackles, materials such as aluminium bands, lacing, binding, stitching wire, labours,cladding, inspection, testing and guarantee are using Rock Wool Mattress / Slabs (in 2 halves) as per drawings, documents, codes, standards and technical specification and as per instructions of Owner / Consultant.

Insulation Thick. 25 MM For Pipe Size 1/2"

Insulation Thick. 25 MM For Pipe Size 3/4"

Insulation Thick. 60 MM For Pipe Size 3/4"

Insulation Thick. 30 MM For Pipe Size 1"

Insulation Thick. 60 MM For Pipe Size 1"

Insulation Thick. 30 MM For Pipe Size 11/2"

Insulation Thick. 30 MM For Pipe Size 2"

Insulation Thick. 30MM For Pipe Size 3"

Insulation Thick. 30 MM For Pipe Size 4"

Insulation Thick. 30 MM For Pipe Size 6"

Insulation Thick. 30 MM For Pipe Size 8"

Insulation Thick. 80 MM For Pipe Size 8"

Insulation Thick. 35 MM For Pipe Size 8"

Insulation Thick. 35 MM For Pipe Size 10"

Insulation Thick. 80 MM For Pipe Size 10"

Insulation Thick. 25 MM For Pipe Size 12"

Insulation Thick. 30 MM For Pipe Size 12"

Insulation Thick. 25 MM For Pipe Size 14"(Mattress)

PIPING WITH OPERATING TEMPERATURE UP TO 400 DEG C & NOMINAL PIPE SIZE ABOVE TO 14” NB - Supply and application of insulation as per PDIL TS/ES/docs including cleaning , all complete with tools, tackles, scaffolding at all elevation, manpower, materials such as aluminium bands, lacing, binding, stitching wire, labours,cleaning , all complete with tools, tackles, materials such as aluminium bands, lacing, binding, stitching wire, labours,cladding, inspection, testing and guarantee are using Rock Wool Mattress / Slabs (in 2 halves) as per drawings, documents, codes, standards and technical specification and as per instructions of Owner / Consultant.

Insulation Thick. 40 MM For Pipe Size 20"

Insulation Thick. 40 MM For Pipe Size 24"

Insulation Thick. 40 MM For Pipe Size 44"

Insulation Thick. 40 MM For Pipe Size 48"

PIPING WITH OPERATING TEMPERATURE from 401 DEG C to 450 DEG C & NOMINAL PIPE SIZE UP TO 14” NB - Supply and application of insulation as per PDIL TS/ES/docs including cleaning , all complete with tools, tackles, scaffolding at all elevation, manpower, materials such as aluminium bands, lacing, binding, stitching wire, labours,cleaning , all complete with tools, tackles, materials such as aluminium bands, lacing, binding, stitching wire, labours,cladding, inspection, testing and guarantee are using Mattress / Slabs (in 2 halves) as per drawings, documents, codes, standards and technical specification and as per instructions of Owner / Consultant.

Insulation Thick. 100 MM For Pipe Size 3/4"

Insulation Thick. 100 MM For Pipe Size 1"

Insulation Thick. 100 MM For Pipe Size 11/2"

Insulation Thick. 160 MM For Pipe Size 12"

PIPING WITH OPERATING TEMPERATURE from 451 DEG C to 500 DEG C & NOMINAL PIPE SIZE UP TO 14” NB - Supply and application of insulation as per PDIL TS/ES/docs including cleaning , all complete with tools, tackles, scaffolding at all elevation, manpower, materials such as aluminium bands, lacing, binding, stitching wire, labours,cleaning , all complete with tools, tackles, materials such as aluminium bands, lacing, binding, stitching wire, labours,cladding, inspection, testing and guarantee are using Mattress / Slabs (in 2 halves) as per drawings, documents, codes, standards and technical specification and as per instructions of Owner / Consultant.

Insulation Thick. 100 MM For Pipe Size 3/4"

Insulation Thick. 100 MM For Pipe Size 1"

Insulation Thick. 100 MM For Pipe Size 11/2"

Insulation Thick. 160 MM For Pipe Size 12"

PIPING WITH OPERATING TEMPERATURE from 401 DEG C to 450 DEG C & NOMINAL PIPE SIZE ABOVE 14” NB- Supply and application of insulation as per PDIL TS/ES/docs including cleaning , all complete with tools, tackles, scaffolding at all elevation, manpower, materials such as aluminium bands, lacing, binding, stitching wire, labours,cleaning , all complete with tools, tackles, materials such as aluminium bands, lacing, binding, stitching wire, labours,cladding, inspection, testing and guarantee are using Mattress / Slabs (in 2 halves) as per drawings, documents, codes, standards and technical specification and as per instructions of Owner / Consultant.

Insulation Thick. 175 MM For Pipe Size 20"

Insulation Thick. 180 MM For Pipe Size 24"

PIPING WITH OPERATING TEMPERATURE from 451 DEG C to 500 DEG C & NOMINAL PIPE SIZE ABOVE 14” NB- Supply and application of insulation as per PDIL TS/ES/docs including cleaning , all complete with tools, tackles, scaffolding at all elevation, manpower, materials such as aluminium bands, lacing, binding, stitching wire, labours,cleaning , all complete with tools, tackles, materials such as aluminium bands, lacing, binding, stitching wire, labours,cladding, inspection, testing and guarantee are using Mattress / Slabs (in 2 halves) as per drawings, documents, codes, standards and technical specification and as per instructions of Owner / Consultant.

Insulation Thick. 175 MM For Pipe Size 20"

Insulation Thick. 180 MM For Pipe Size 24"

ALUMINUM FOIL WRAPPING ON S.S. SURFACE BEFORE INSULATION OF EQUIPMENT & PIPING:

ALUMINUM FOIL WRAPPING ON S.S. SURFACE BEFORE INSULATION OF EQUIPMENT & PIPING: - Supply and application as per enclosed spec, inspection and certification by Owner / Consultant’s incharge.

INSPECTION POCKETS

Inspection pockets of sizes 4” X 4” to be made as instructions of Owner / Consultant at site.

PART-C(CATHODIC PROTECTION)

Design, detailed engineering, site survey

Transformer Rectifier Unit

Supply of Transformer Rectifier Unit (s), Dry type, naturally air cooled, suitable for outdoor installation in non-Hazardous area , AC operated rectifier unit shall have one input ‐ 415V AC +-10%, 3 Ph, 50Hz +-5%, AC and output shall be 75V / 50 A or per design of the Bidder with GPS based current interrupter, in built RMU/RTU and central Control and monitoring system with fibre optic communication system, as per Technical Specification - Cathodic Protection Transformer Rectifier Unit (PC183-TS-0824) . TRU/RTU shall have provision for connecting RS 485 communication cable also, in addition to the fibre optic connection

Supply of Transformer Rectifier Unit (s), oil cooled, suitable for outdoor installation in Hazardous area , AC operated rectifier unit shall have one input ‐ 415V AC +-10%, 3 Ph, 50Hz +-5%, AC and output shall be 75V / 50 A or per design of the Bidder with GPS based current interrupter, as per Technical Specification - Cathodic Protection Transformer Rectifier Unit (PC183-TS-0824)

Installation, testing & commissioning of above Transformer Rectifier Unit (s)

MMO wire anode

Supply of Factory prepackaged Longline MMO wire anode- 1.5 mm diameter with piggy back cable -1c x 10 sq mm KYNAR/HMWPE and calcined petroleum coke breeze in an acid resistance fabric with splice kit

Installation of MMO wire anode

Canistered MMO Tubular anodes

Supply of Canistered MMO Tubular anodes- 4 Amp Vertical anode ground bed using MMO tubular anode (25 mm dia. x 500mm long) of each 4A rating , with cable of 1c x 10 sq mm KYNAR/HMWPE, unarmoured of minimum length to reach the anode junction box without any splicing/jointing , supplied with a canister of size 0.2 mtr X 2 mtr filled with calcined petroleum coke breeze of bulk density 800-1000 kg/ m3.

Installation of above Canistered MMO Tubular anodes

In line splices Kit for jointing of MMO wire anode to anode tail cable

Supply of In line splices Kit

Installation of above In line splices Kit

Junction Boxes: Supply, Installation & Testing of Junction Boxes of approved make, complete in all respects as given in the specification and SOW and directions of Site Engineer/ Engineer—in-Charge with all its accessories to ensure trouble free operation. **Junction Boxes installed in Zone- 1/Zone-2 area shall be flameproof (Ex’d’) type suitable for gas group IIA/IIB.

Supply of Anode Junction box (flameproof) AJB with 12 connections AJB outdoor type, with suitable shunt & resistor Enclosure shall be Aluminium LM-6, completely enclosed, outdoor type, backplate structure/wall mounted, natural air cooled suitable for the hazardous area classification with IP 65 degree of protection. The cable entry in the boxes shall be as per hazardous area classification using double compression glands or through a bend installed in the foundation of the junction box. Also, the cable entries should be properly sealed with mastic so as to prevent entry of moisture and foreign particles in the box. Canopy shall be provided for the AJB for rain water protection.

Installation of above Anode Junction box (flameproof) AJB

Supply of Cathode Junction box (flameproof) CJB with 5 connections, outdoor type, with suitable shunt & resistor Enclosure shall be Aluminium LM-6, completely enclosed, outdoor type, backplate structure/wall mounted, natural air cooled suitable for the hazardous area classification with IP 65 degree of protection. The cable entry in the boxes shall be as per hazardous area classification using double compression glands or through a bend installed in the foundation of the junction box. Also, the cable entries should be properly sealed with mastic so as to prevent entry of moisture and foreign particles in the box. Canopy shall be provided for the CJB for rain water protection.

Installation of Cathode Junction box (flameproof)

Monitoring Junction Box (Flameproof)

Supply of Monitoring Junction Box (Flameproof) with 10 terminals outdoor type, Enclosure shall be Aluminium LM-6, completely enclosed, outdoor type, backplate structure/wall mounted, natural air cooled suitable for the hazardous area classification with IP 65 degree of protection. The cable entry in the boxes shall be as per hazardous area classification using double compression glands or through a bend installed in the foundation of the junction box. Also, the cable entries should be properly sealed with mastic so as to prevent entry of moisture and foreign particles in the box. Canopy shall be provided for rain water protection, with Exd’ cable glands complete with mounting frame and foundation

Installation of above Monitoring Junction Box (Flameproof)

Permanent Reference Cells (Cu-CuSO4): Supply and Installation of Permanent Reference Electrodes of approved make with all its accessories to ensure trouble free operation. Installation of permanent half cells including connecting the cable in the Junction Box/Test Station etc. with cable lugs, sealing material, laying of cable, testing& commissioning of cell etc. all complete with required material, excavation, backfilling etc. as per specifications, recommendation of cell supplier and directions of Site Engineer / Engineer-in-Charge.

Pre-packaged Cu/CuSO4 electrode with chemical backfill and 1c x 6 mm2 XLPE/PVC cable, unarmoured of suitable length upto reference electrode junction box/ test station without any splicing

Installation of above Reference Cells (Cu-CuSO4)

Cables for PCP work / TCP work (if required). Supply, Laying, Installation, Testing & Commissioning of Cables of approved make with all its accessories to ensure trouble free operation. All Cables shall be annealed high conductivity, stranded copper conductor, 650/1100V grade, XLPE/PVDF insulated, PVC/HMWPE inner sheath, armoured/unarmoured, PVC (ST2) type outer sheath ,FRLS. Laying of anode header / cathode header / monitoring/ reference cell cables and connection to the CP unit / pipeline / half cell etc. The work includes excavation, installation, supply of all required materials such as sealing materials, lugs, PVC sleeve, repair materials etc., and carrying out all works such as exposing pipe, coating repair, cad welding / pin brazing, backfilling etc.,; in all types of strata and soil (including rock) by making the trench, back filling the trench, cable terminations, work complete in all respects including cost of all labour, material, tools etc. as per specification and instruction of site Engineer / Engineer—In—Charge and approved drawings.

Anode tail Cable: 1C x 10 sqmm. Copper conductor PVDF/HMWPE, Unarmored

Cathode tail Cable 1C x 16 sq mm. Copper conductor, armoured

Ref. Cell Cable: 1C x 6 sq mm. Copper conductor, Un-Armored

Measurement Cable : 12 core x 1.5 sq mm. Copper conductor, Armored, screened

Anode & cathode Header Cable: 1C x 50 sqmm. Al conductor, Armored

Supply of 6 Fiber multi mode FO Cable with all accessories for termination , this also include splicing, jointing as per requirement

Power supply cable between Power source(SS) or CP System PDB and T/R unit shall be 25mm2, stranded Aluminium conductor, 4-core, Aluminium wire armoured, XLPE insulated and PVC sheathed 1100V grade cable.

Handling, Laying , testing and commissioning of 1.1 KV Grade, XLPE Insulated, PVC inner sheathed, armoured/unarmoured, FRLS PVC outer sheathed cables including its termination directly buried, pulling through pipes including supply & fixing of cable tags, Al clamps with all labour, consumable materials and necessary hardware to make installation complete in all respect as per direction of engineer-in-charge.

Anode tail Cable: 1C x 10 sqmm. Copper conductor PVDF/HMWPE, Unarmored

Cathode tail Cable 1C x 16 sq mm. Copper conductor, armoured

Ref. Cell Cable: 1C x 6 sq mm. Copper conductor, un-Armored

Measurement Cable : 12 core x 1.5 sq mm. Copper conductor, Armored, screened

Anode & cathode Header Cable: 1C x 35/50 sqmm. Al conductor, Armored

Handling, laying of 6 Fiber multi mode FO Cable with all accessories for termination , this also include splicing, jointing as per requirement

Power supply cable between Power source(SS) or CP System PDB and T/R unit shall be 25mm2, stranded Aluminium conductor, 4-core, Aluminium wire armoured, PVC insulated and sheathed 1100V grade cable.

Power distribution board

Supply of CP Power distribution board for power supply to the TRUs The Power distribution board (PDB) shall be composed of one no.415 V 4 P 250A incoming MCCB and 6 Nos.415 V, 4 P 63A outgoing MCB for input power supply to TR Unit as well as 6No.6A outgoing DP MCB for central monitoring system power supply ( if required)

Installation, testing & commissioning of above Power Distribution Board

Supply of CP Power distribution board for Supply to the TRUs The Power distribution board (PDB) shall be composed of one no.415 V 4 P 125A, incoming MCCB and 3 no. 415 V, 4 P 63A outgoing MCB for input power supply to TR Unit as well as 6No.6A outgoing DP MCB for central monitoring system power supply ( if required)

Installation, testing & commissioning of above Power Distribution Board

Test Station

Supply of Test Station with 2 nos 1c x 6 sq mm cable , Copper conductor, PVC insulated and PVC sheathed with 4" access pipe for RE installation. The test station shall be installed during TCP stage are utilized in PCP stage as well

Installation, testing & commissioning of above Test Station

Polarisation coupon Supply Installation, Testing of Polarization Coupons of approved make, complete in all respects as given in the specification and directions of Site Engineer/ Engineer—in-Charge with all its accessories to ensure trouble free operation.

Polarization Coupons with two cables of 1c x 6 sq mm and 1c x 10 sq mm XLPE/PVC unarmoured of suitable length such as to reach Test Station connected to the coupon. The coupon shall be connected to the pipeline via a suitable rated magnetic reed switch

Installation, testing & commissioning of above Polarisation coupon

Thermit Weld

Supply of Thermit Weld CA-15(1 lot of 20 lugs)

Installation of above Thermit Weld

Testing and commissioning of Cathodic protection system

Post commissioning monitoring and maintenance of Cathodic protection system for 1 year, including one visit per month. In case, any rectification/material required for proper operation of Cathodic protection system, the same shall be in the scope of CP contractor

TCP-Magnesium Ribbon anodes

Supply of TCP-Magnesium Ribbon anodes (19.05 mm x 9.52 mm, 0.35kg/ m)with 1c x 6 sq mm XLPE/PVC cable for connection upto Test station provided every 70 mtr

Installation of TCP-Magnesium Ribbon anodes (19.05 mm x 9.52 mm, 0.35kg/ m)with 1c x 6 sq mm XLPE/PVC cable for connection upto Test station provided every 70 mtr

Spares

4 ½ High resistance digital multimeter (Fluke make) or equivalent

Portable Cu/ CuSO4 ref cells (Mc miller) or equivalent

AC/DC Clamp ON meter (Fluke make) or equivalent

TRU Spares for 7 TRU's

D.C.Voltmeter

D.C.Ammeter

A.C.Voltmeter

A.C.Ammeter

Diodes

D.C.Fuses for output side

HRC fuse for Diodes

A.C.fuses for input side

D.C.Lightening arrestor

A.C.Circuit breaker(MCB)

Electronic Control Cards each type

Filter circuit capacitor

Signal light assembly for annunciation

R.C. Surge Diverter

Control transformer

Coarse voltage control switch

Coarse current control switch

Fine voltage control switch

Fine current control switch

Toggle switches

Assorted Glass cartridge fuses

Sterling and Wilson Private Limited

Bridge and Roof Co India Ltd

Sharp Tanks and Structurals Pvt Ltd

NRP PROJECTS PRIVATE LIMITED