Construction of Dimasa Bhawan at Plot No.12, Sector-13, Dwarka, New Delhi-110075

Amount

CARRIAGE OF MATERIALS Carriage of good earth by mechanical transport including loading, unloading and stacking (upto 30 KM)

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. Ali kinds of soil. (from 1.5 to 3 m)

All kinds of soil (from 3.0 to 4.5 m)

All kinds of soil (from 4.5 to 6.0 m)

All kinds of soil (from 6.0 to 7.5 m)

All kinds of soil (from 7.5 to 9.0 m)

All kinds of soil (from 9.0 to 10.5 m)

All kinds of soil (from 7.5 to 9.0 m)

All kinds of soil (from 9.0 to 10.5 m)

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

CONCRETE WORKS Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : "1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).

Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. Note : (1) Excess/less cement used than specified in this item is payable/recoverable separately. (2) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacement of OPC as per IS : 456. Uniform blending with cement is to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC. All works upto plinth level : M-10 grade plain cement concrete (cement content considered @ 220 kg/cum)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

REINFORCED CEMENT CONCRETE WORK FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

Shelves (Cost in situ)

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns,Pillars, Piers, Abutments, Posts and Struts

Stairs, (excluding landings) except spiral-staircases

Edges of slabs and breaks in floors and walls. Under 20cms wide

Weather shade, chajjas, corbels etc. Including edges.

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)

STEEL REINFORCEMENT Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using fly ash and cement content as per approved design mix, and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. NOTE- (1) Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. (2) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacement of OPC as per IS : 456. Uniform blending with cement to be ensured in accordance with clauses 5.2 and 5.2.1 of IS:456 -2000 in the items of BMC and RMC. Note :- The above item shall be used judiciously where specified quality of Fly Ash is available for mixing in concrete. Also, the guidelines issued by CDO, CPWD, vide circular no. CDO/SE(RR)/Fly Ash (Main)/102 dated 9th April 2009 shall be followed in such cases. All works upto plinth level

All works above plinth level upto floor V level

Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable /recoverable separately. Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. (Note:- Cement content considered in M-30 is @ 340 kg/ cum)

Providing M-40 grade concrete instead of M-25 grade BMC/ RMC.(Note : Cement content considered in M-40 is @ 360 kg/ cum)

Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof.

TOUCH PILE WORK FOR EARTH PROTECTION Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). Note: Truck Mounted rotary/TMR/Tubewell boring machine shall not be used . 600 mm dia piles

BRICK WORK Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in foundation and plinth : Cement mortar 1:6 (1 cement : 6 Coarse sand)

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand)

Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Extra for brick work / AAC block masonry / Tile brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

MARBLE & GRANITE WORK Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm

Area of Slab over 0.50sqm

Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work.

Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.

WOOD AND PVC WORK Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Mealamine polishing on door windows by preparing the surface applying putty base course. prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler.

Providing 25x5 mm flat iron hold fast 25 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 11.5x15x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50 x 20 mm

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) over item no. 9.20 and 9.21

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : Rectangular or square.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality 1.0 mm thick.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing 12 mm thick frameless toughened glass partitions of approved brand and manufacturer, including providing and fixing partitions at top & bottom with aluminum channel etc. all complete as per direction of Engineer-in-charge

Providing and fixing fire resistant door frame of section 50 x 60mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter. The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded).

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately).

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per direction of Engineer-in-charge. The glass shall be clear, toughened, interlayered, non-wired fire resistant having 11 mm thickness of approved brand with 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 15 min of insulation (EI15) and having a sound reduction of 37dB and LT of 86%. Glass shall be compliant to class 2(B)2 category of Impact Resistance as per EN 12600. The glass should be manufactured in UL & TUV audited Facility and including UL-EU Certification.The maximum glazing size cannot be more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report for the complete system (Glazed Door or Partition) will be considered valid only if it contains the stamp and signature of the authorized signatory from the glass manufacturer. (Actual glass size is to be measured at site for payments).

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.

Providing and fixing approved brand and manufacturer SS 304 grade hardware's for Doors etc. WOODEN DOOR & WINDOW Providing and fixing approved brand and manufacture SS 304 tube lever Handle D-type with round rose fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade Mortice lock 160mm with key pin 60mm cylinder fixed fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade Tower bolt 250mm long with 10mm dia fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade Tower bolt 150mm long with 10mm dia fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade wall mounted door buffer fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade Door Stopper - door mounted hanging type fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete..

Providing and fixing approved brand and manufacturer SS 304 grade hardware's for Glass Doors etc. Providing and fixing approved brand and manufacture SS 304 grade Top & Bottom Patch fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade D type 1200mm Pull Handle with 32mm dia fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade D type 300mm Pull Handle with 32mm dia fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade Glass to Glass Lock Round type with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade Floor spring (weight approx 100-120kgs) fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

STEEL WORK Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

FLOORING Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing and laying vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel,plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600x600 mm

Glazed Vitrified tiles Matt/ Antiskid finish of size Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Extra for pre finished nosing to treads of steps of Granite stone.

Extra for Granite stone flooring in treads of steps and risers using single length up to 2.00 metre .

Providing and fixing 18mm thick Granite stone work for wall lining upto 10 m height in cement mortar 1:3 (1cement : 3 coarse sand) including pointing with white cement mortor with an admixture of pigment to match the granite shade complete as per direction of Engineer-in-charge.

Providing and fixing 18mm thick pre-polished granite stone strip of any colour and shade 60mm wide with one edge round moulded and polished, fixing the strip in wall above the top of dado, by cutting chase in wall and fixing the same with cement mortar 1:3 (1cement : 3 coarse sand), neatly finished and fixed such that the outer rounded edge projected 20mm beyond the surface of dado , all complete as per direction of engineer-in-charge.

Providing and Fixing of TRANQUIL ECOWOOD or equivalent make Linear Grooved Slats Sound Absorption Panels HDF based Melamine Finish Sound Absorption Panels on walls or ceiling over existing substrate. The panels are made of Fire Rated Red Color High Density Fibreboard of density about 800 kg/m3 with low formaldehyde content. The top surface is laminated with melamine finish. Each panel is having tongue and groove structure on the long side with an additional groove to hold the clip of size 2440mmX128mmX15mm. The back of each panels is pasted with acoustic fleece of density 80kg/m3. The front of the panel is grooved in width of 2mm and depth of 4mm while the back is perforated with holes of dia 10mm at a distance of approximately 15mm centre to centre. The installation is to be done on a aluminium channel with galvanized steel clip system. The channel is of dimension L-2440 X W-25mm X Depth-20mm with the clips for each panel of size 43mmX40mm. Each channel is fixed at a distance of 600 mm. Once installed, the edges if open are covered with L profile of similar shade. all complete as per direction of Engineer-In-Charge.

Providing and laying Laminate wooden flooring (Grade AC4, 8 mm thick Ambience Premium-AC4 ), having a good backing layer made up of plastic laminate or melamine as specified by the manufacturer and approved by Engineer-incharge.

Wooden flooring Skirting same as above

Floor strip on edges 20% of Wooden flooring

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick

FINISHING WORK 12mm cement plaster of mix : 1:6 (1 cement : 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement : 6 fine sand)

6 mm cement plaster to ceiling of mix : 1:3(1 cement: 3 coarse sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing & fixing 150mm wide Chicken wire mesh on joints of RCC & Brick work before plastering complete in the direction of Engineer-in-charge.

Terracotta tiles cladding

ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing over glass 50 micron thick Etching strips (film) of approved make fixed as per manufacturer's specifications all complete as per direction of the Engineer-in-charge.

WATER PROOFING WORK Supplying and installing 1.2mm thick self-adhesive HDPE membrane having the following technical properties-Puncture resistance 1000 N((± 5 to 10%)as per ASTM E 154 ,Tensile strength of 25 Mpa as per ASTM D412,Elonagtion of 500% as per ASTM D 412, Resistance to hydrostatic head > 60M as per ASTM D 5385,Peel adhesion to concrete 880N/m as per ASTM D 903. The system should be fully bonded to the RCC and consists of highly resilient HDPE layer, a pressure sensitive adhesive layer which is covered by a weather proof protective layer. The membrane shall have minimum of 100 mm side and end laps which shall be sealed with double sided adhesive tape. The size of the membrane should not be less than 3 Mtr. x 20 Mtr. to minimize the joints.The entire waterproofing treatment should be guaranteed by the principal manufacturer as a system, for ten years and the work should be executed by the manufacturer inhouse application arm/authorized applicator who has executed more than 30,000 sq.mtr area of same system in single project. all complete as specified and as directed by the Engineer-in-Charge :

Providing and fixing Swell able water bar 20 X 10mm at construction joint and junction of raft and retaining wall. all complete as specified and as directed by the Engineer-in-Charge :

WATERPROOFING FOR RETAINING WALL Providing and laying of 1.5 mm thick SBS based self-adhesive waterproofing membrane topped with hdpe cross laminated film with the following techncial properties-Softening point >105 as per ASTM D36,Tensile Strength (L/T), (N/mm2)Film L 34-50 & T 40-56 as per ASTM D882,Elongation (L/T) film, (%) L 200-260 ,T 160-200 as per ASTM D 882, Tear Resistance (L/T) film , (N) L 240 -440,T 220-400 as per ASTM D 1004, Puncture Resistance, (N)Film >200 as per ASTM E 154, Hydrostatic pressure > 50 m (5BAR) No leakage as per BSEN12390(part 8) ,Peel Adhesion strength, (L/T),(N/ mm) Primed Substrate Self >1 as per ASTM C974 including cleaning the surface,priming the surface with cold applied bituminous primer@4-6 sqmtr/litre, properly sealing the joints & maintaining 75 mm overlap between the membrane selvedge & 100 mm overlap on the end joints of the membrane over the slab etc. complete.The entire waterproofing treatment should be guaranteed by the principal manufacturer as a system, for ten years and the work should be executed by the manufacturer inhouse application arm/authorized applicator who has executed more than 15,000 sq.mtr area of same system in single project . all complete as specified and as directed by the Engineer-in-Charge :

Providing & Fixing of protection board 8MM thick HDPE Dimple board spot bonded on retaining wall before backfilling. all complete as specified and as directed by the Engineer-in-Charge :

Providing aluminum flashing, wherever required for termination of self adhesive membranes at all locations. Item shall include rates for membrane termination on the Vertical retaining wall at height 300mm above the ground level for termination of the membrane and finally sealing the strip using Polysulphide sealant. all complete as specified and as directed by the Engineer-in-Charge :

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick joint less cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65mm.

Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Cement mortar 1:4 (1cement : 4 coarse sand)

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase

Providing and placing in position suitable PVC water stops conforming to IS:12200 between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc complete. Serrated with central bulb (225mm wide,8-11mm thick)

Providing and laying broken brick bats in sunken portion of W.C. & kitchen. These broken brick bats mixed with cement mortar 1:5:10 ( 1 cement : 5 coarse sand :10 brick bats) laid and compacted properly including supply of labour, material, and tools and plant etc. as per instruction of Engineer-in-charge.

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.

Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge.

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS :1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

STRUCTURAL GLAZING, CURTAIN GLAZING, ALUMINIUM COMPOSITE PANEL WORK Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places.. Note:- 2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories 6) Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.“(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2)“For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.“ Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge.

ROOFING Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mmdia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks)

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gsm/sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 x mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK.

TRAP DOOR Providing & fixing access panel is made out of Moist Bloc (Moisture Resistant) board for opening 600 x 600mm of thickness 12.5mm. All edges of the panel are reinforced with aluminium profiles and corners are guarded with stainless steel 304 grade clips to increase strength and prevent damages. complete in all respect as directed by Engineer-in-charge.

EXTERNAL DEVELOPMENT EARTH WORKS Carriage of good earth by mechanical transport including loading, unloading and stacking (upto 30 KM)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

CONCRETE WORKS Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

RCC WORK Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using fly ash and cement content as per approved design mix, and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. NOTE- (1) Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. (2) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacement of OPC as per IS : 456. Uniform blending with cement to be ensured in accordance with clauses 5.2 and 5.2.1 of IS:456 -2000 in the items of BMC and RMC. Note :- The above item shall be used judiciously where specified quality of Fly Ash is available for mixing in concrete. Also, the guidelines issued by CDO, CPWD, vide circular no. CDO/SE(RR)/Fly Ash (Main)/102 dated 9th April 2009 shall be followed in such cases. All works upto plinth level

All works above plinth level upto floor V level

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts

STEEL REINFORCEMENT Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

MASONRY WORK Cement mortar 1:6 (1 cement : 6 coarse sand)Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand)

STEEL WORK Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

FINISHING WORK Providing and fixing 30mm thick Polished finish granite stone in cladding/ dado in specified sizes as per drawing of approved colour and quality wherever specified in DRY cladding using stainless steel clamps of 5mm thick of grade 304 of approved make, anchors bolts / dash fasteners, necessary adhesive for grouting of clamps in stone, maintaining grooves in stone slabs as per the drawing and filling the same with non-staining, non-streaking silicon joint sealants (Elastosil 355 of Wacker / Dow Corning 991 or approved equivalent) including cost of SS cramps, backer rod, drilling, anchoring, grouting, scaffolding, edge polishing, chamfering to received tapered stone etc., complete (Tenderer shall submit the dry cladding fixing details for approval.) Only exposed surface will be measured for payment. (Basic rate=Rs 2300 per sq.m)

Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineerin-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

ROAD WORKS Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).

Supplying and stacking at site 90 mm to 45 mm size stone aggregate

63 mm to 45 mm size stone aggregate

Stone screening 13.2 mm nominal size (type A)

Stone screening 11.2 mm nominal size (type A)

Moorum

Laying spreading and compacting stone aggregate of specified sizes to WBM specifications including spreading in uni form thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill up interstics of coarse aggregate watering and compacting to the required density.

Providing and laying 400 micron thick PVC Sheet on WBM Surface complete as per direction of engineer-in-charge.

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).

PAINTING ROAD / RUNWAY MARKING Painting runway/taxi track/apron marking with adequate no. of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge i/c cleaning the surface of all dirt, scales, oil, grease and other foreign material etc. and lining out completeNew work (Two or more coats)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted of coarse sand, filling the joints with coarse sand etc. all complete as per direction of engineer-in-charge.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Medium shade pigment using 50% white cement 50% Grey cement

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line ,level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand) including making joints with or without grooves (thickness of joints except sharp curve shall not be more than 5mm) including making drainage opening wherever required complete etc. as per direction of engineer-in-charge(length of finished kerb edging shall be measured for payment).(Precast C.C. kerb stone shall be approved by engineer-in-charge).

PLUMBING WORKS Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink double bowl with drain board 1550x545x230 mm, Nirali Model Luxor or Equivalent.

Kitchen sink Single Bowl with Drain Board ,1145x510x215. Nirali Model Elegance Large or Equivalent.

Providing and fixing 15mm C.P brass Wall-mount kitchen mixer in polished chrome, Kohler Model. No.K-20593IN-4-CP or approved equivalent.) for kitchen sink. Including cutting and making good the walls wherever required .

Providing, fixing, testing & commissioning of white Vitreous china wall hung European type water closet with P trap, with lid , seat cover with CP bolts, nuts, concealed cistern with Face plate ,CP brass hinges and rubber buffers , WC pan connector / flush pipe with clamp and adapter rubber joint & necessary fittings screws and washers complete including cutting and making good the walls and floors where required. Wall Hung WC with seat cover Kohler Model-K-2537W-00 + WC Connector Kohler Model-1046327-S +Concealed Flushing Cistern Kohler Model- K-77029IN-P-NA+Face Plate for Cistern Kohler Model-75891IN-M-CP or Equivalent.

Providing and fixing white vitreous china wash basin with special fabricated brackets painted white, faucets as required, 32 mm C.P. brass waste.32 mm C.P. brass bottle trap & pipe to wall with rubber adopter for waste connection and C.P. brass wall flange complete in all respects including cutting and making good the walls where required. Wash basin Kohler Model No-K-75375IN-0 ,32 mm CP brass waste Kohler Model No. K-1065000-CP, 32 mm C.P. brass bottle trap with pipe to wall and C.P. wall flange Kohler Model. No. K-75823IN-CP or approved equivalent.

Providing and fixing 15mm C.P brass Single Control Pillar Faucet Kohler Model No. K-37329T-4-CP or approved equivalent for Wash Basin Including cutting and making good the walls wherever required.

Providing and fixing 15mm C.P. copper connecting pipe 450mm long with C.P. brass nuts, washers complete in all respects.(Jaquar Cat No. ALD 803AB or approved equivalent)

Providing & Fixing vitreous china Urinal with rear inlet in white 0.5 L,Kohler Model No.K-18645IN-SS-0 or approved equivalent with C.I. Hangers and CP brass waste, Urinal sensor with AC adaptor (AC+DC) /with Flushing adjustable in polished chrome ,Kohler Model no.K-24199IN-C03-CP comprising of electronic & electrical items including infrared photo cells eyes, electronically operated solenoid valve, step down equipment, electric operated,concealed piping etc. & any other item required to provide satisfactory functioning, 32 mm C.P. brass bottle trap with pipe to wall and C.P. wall flange Kohler Model. No.K-16407IN-CP or approved equivalent complete including cutting and making good the walls and floors where required.

Providing and fixing C.P. brass 15 mm nominal bore two way bib cock Kohler Model.K-20075IN-4-CP or Equivalent.

Providing and fixing C.P. brass 15 mm nominal bore long body bib cock Kohler Model.16093IN-4-CP or Equivalent.

Providing and fixing C.P. brass 15mm nominal bore angle valve in polished chrome, Kohler Model. K-23515IN-4-CP or Equivalent.

Providing and fixing C.P. cast brass twin coat hooks fixed to PVC rawl plug with SS screws Kohler model. No.K-14443-CP or approved equivalent.

Providing and fixing health faucet with 1 m long flexible tube and wall hook including all fittings Kohler model No.K-77364IN-CP or approved equivalent.

Providing and fixing C.P brass toilet paper holder Kohler Model. No-K-97502T-CP or approved equivalent,Including cutting and making good the walls wherever required.

Providing and fixing CP Brass Complete shower set with Recessed Thermostatic 3-way valve set in polished chrome Model K-99870T-CP, Shower head with shower arm Kohler model K-5513IN-CP, Reccessed Thermostatic 3 way Trim Cover plate Kohler Model -K-99866T-9-CP, Hand Shower with Hose in Polished chrome Kohler Model K-72415IN-CP and supply elbow for Hand shower Kohler Model K-16381IN-CP and Bath Spout Kohler Model K-99060IN-CP including accesories or any other approved equivalent make ,Including cutting and making good the walls wherever required.

Providing and fixing soap dish in polished chrome including all fittings complete.(Kohler Model K-10560-CP)

Providing and fixing Towel rail in polished chrome including all fittings complete.(Kohler K-37347IN-CP)

Providing and fixing Towel Rack in polished chrome including all fittings complete.(Kohler Model K-25066IN-CP)

Providing and fixing Hand Dryer including all fittings complete.(Euronics Model Kinox ZJD5)

Providing and fixing Air Purifier Euronics Model-EA 24 or equvalant ,including all fittings complete in all respect.

Soil, Waste, Vent etc. Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work up to plinth. 1:2:4 ( 1cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size )

Making khurras 45x45 cms with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) over PVC sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement rounding the edges and making the finishing the outlet complete with following fittings. With C.I Body with Aluminium Ring and Aluminium Dome including two SS Screw (Make Neer Model No NDG 1003).

With Side Wall Parapet in C.I Body with Painted Aluminium Grate and Four SS Screws (Make Neer Model No NPD 3003).

Providing and fixing sound-insulating mineral reinforced 3 layer polypropylene pipe & fitting drainage system suitable for above & below ground installation. Conforming to 12056,DIN EN752, DIN1986-100, and DIN EN1610. Tensile strength of the pipes is DIN EN accordance to DIN EN ISO 527-3. The pipe connections are leak-proof up to an internal excess water pressure of 1.0 bar.Fire behaviour for the system is In accordance with EN 13501-1, D,S3-dO Fulfils the requirements of VDI guideline 4100 with excellent results (less than 20 db Installation sound level measured in the basement test room UG rear). Connection having Push fit socket with factory installed lip sealing ring. Make & Grade - Poloplast- Polo Kal NG , Rehau-Raupiano Plus & Huliot- Huliot Ultra Silent Plus. 40 mm OD

Providing and fixing uPVC agricultural pipes conforming to IS:4985 (10 kg/sqcm) including all fittings, e.g. couplings, tees, bends, reducers and screwed adoptors jointing with solvent cement joint as per manufacturers' recommendations. [for Rain Water Pipes] 75 mm OD

Providing and fixing Polyproplelene (PP) P-Trap including setting with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 hand stone ballast 20 MM nominal size) the inlet from floor level to trap rim to be grouted and cemented neat manner including cutting and making good the floor & wall wherever requiredcomplete in all respects 110 mm inlet and 110 mm outlet.

Providing, fixing, testing & commissioning of Floor drain made of PP reducing elbow (100x50 mm) with horizontal drain outlet of 50 mm OD, round top of 100 mm OD with cement mortar.

Providing and fixing in position 125x125 mm stainless steel grating for floor trap/floor drain including fix to floor with cement mortar.

Providing and fixing of GI clamps with EPDM rubber lining Zinc plated for support of vertical soil, waste, vent and rain water pipes, embedded in walls with anchor fastner etc. including cost of cutting holes and making good the walls complete in all respects. For 75 mm OD Pipe

For 110 mm OD Pipe

Providing and fixing G.I. "B" class" pipes conforming to I:S 1239 (medium grade) including all fittings, testing, cutting holes or chases and making good the same wherever required. (For sump risers & Drain pipes) 80 mm dia. nominal bore

100 mm dia. nominal bore

Painting G.I. pipes with two or more coats of synthetic enamel paint of approved quality over a coat of zinc chromate as directed by the Engineer-in-Charge (shade as per pipe colour code). 80 mm dia. nominal bore

100 mm dia. nominal bore

Providing, fixing, testing and commissioning of PP Ceiling cleanout plug ( Socket Plug ) complete with all fitting, clamps, accessories and civil works. 100 mm dia

Providing, fixing, testing and commissioning of pipe inlet fittings by fixing Tee 110 x50/110 x75 mm (as required) fixed on 'P' traps for connecting fixture drains/ extension pices in PP including fixing and sealing inlet joint with drip seal / Pipe seal joint as required complete.

WATER SUPPLY SYSTEM Providing and fixing Stainless Steel pipes confirming to EN 10312 (S.S.Grade-316) complete with Press Type fittings suitable for doubley secure pressing (two pressings simultaneously– one in front of the crimp and one behind it) for torsion proof and longtitudinally forcelocked connection with Black EPDM Sealing Element with SC-Contur in accordance with DVGW regulation W534, DW 8501 BL 0551, DW 8511 BQ 0245) for Hot and Cold water supply capable to withstand temprature up to 110 degree centrigrade and working pressure 16 bar, such as sockets, bends, elbows, tees, reducers, unions,Flanges etc. necessary adapters for GI/Copper and CP fittings. Clamps with hanger at a spacing as required , including cost of cutting chases & holes in wall and making good the same in cement mortar 1 : 2 (1 cement : 2 coarse sand) including testing of joints complete as per direction of Engineer-in-charge. (For Vertical in Shaft & Terrace) 15 mm dia x 1.0 mm Thick Pipe

22 mm dia x 1.2 mm Thick Pipe

28 mm dia x 1.2 mm Thick Pipe

35 mm dia x 1.5 mm Thick Pipe

42 mm dia x 1.5 mm Thick Pipe

54 mm dia x 1.5 mm Thick Pipe

76.1 mm dia x 2.0 mm Thick Pipe

Providing and fixing Stainless Steel pipes confirming to EN 10312 (S.S.Grade-316) complete with Press Type fittings suitable for doubley secure pressing (two pressings simultaneously– one in front of the crimp and one behind it) for torsion proof and longtitudinally forcelocked connection with Black EPDM Sealing Element with SC-Contur in accordance with DVGW regulation W534, DW 8501 BL 0551, DW 8511 BQ 0245) for Hot and Cold water supply capable to withstand temprature up to 110 degree centrigrade and working pressure 16 bar, such as sockets, bends, elbows, tees, reducers, unions,Flanges etc. necessary adapters for GI/Copper and CP fittings. Clamps with hanger at a spacing as required , including cost of cutting chases & holes in wall and making good the same in cement mortar 1 : 2 (1 cement : 2 coarse sand) including testing of joints complete as per direction of Engineer-in-charge. 15 mm dia x 1.0 mm Thick Pipe

22 mm dia x 1.2 mm Thick Pipe

28 mm dia x 1.2 mm Thick Pipe

35 mm dia x 1.5 mm Thick Pipe

Providing and fixing Stainless Steel pipes confirming to EN 10312 (S.S.Grade-316) complete with Press Type fittings suitable for doubley secure pressing (two pressings simultaneously– one in front of the crimp and one behind it) for torsion proof and longtitudinally forcelocked connection with Black EPDM Sealing Element with SC-Contur in accordance with DVGW regulation W534, DW 8501 BL 0551, DW 8511 BQ 0245) for Hot and Cold water supply capable to withstand temprature up to 110 degree centrigrade and working pressure 16 bar, such as sockets, bends, elbows, tees, reducers, unions,Flanges etc. including necessory excavation and refilling etc complete with all respects. 54 mm dia x 1.5 mm Thick Pipe

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 50 mm dia nominal bore

Providing and fixing forged SS 316 ball valve of brass body with hard chrome plated steel ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads complete in all respects. 20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

50 mm nominal bore

Providing & fixing butterfly valve tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, 2 nos. Table-E flanges, nuts, bolts, washers & painting complete as required. 65 mm dia

80 mm dia

Providing and fixing Thermoflex or Kaiflex thermal insulation tubing a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including all required accessories complete as per specification.6 mm thick (Concealed Pipes) For 18 mm dia Pipe

For 22 mm dia Pipe

Providing and fixing Thermoflex or Kaiflex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including protection by wrapping with 24 gauge alumminium sheet with riveted screw joints all required accessories complete as per specification.13 mm thick (Exposed Pipes) For 20 mm dia Pipe

For 25 mm dia Pipe

For 32 mm dia Pipe

For 40 mm dia Pipe

For 50 mm dia Pipe

For 65 mm dia Pipe

For 80mm dia Pipe

Providing and fixing uPVC agricultural pipes conforming to IS:4985 (10 kg/sqcm) including all fittings, e.g. couplings, tees, bends, reducers and screwed adoptors jointing with solvent cement joint as per manufacturers' recommendations including necssary trenching, refilling etc complete. [for Irrigation Pipes] 32 mm OD

Providing and fixing forged brass single acting air release valve with screwed inlet 25 mm dia.

HEAT PUMPS Supply , installation , testing & commissioning of Micro Processor Controlled air cooled Heat pump delivering actual capacity as per the following parameters duly installed at site. Heat pumps shall be rated at 6.02 KW of input power and 19.8 KW of output power. Refrigerant used should be environment friendly R-410a. Heat pump should heat water upto 55⁰C on heat pump mode. It shall have silent operation and the sound level should not exceed 65 dB. (Make: AO Smith) Refrigerent R-410a/6.2 kg ( Refrigerant) Nominal Input Power - 6.02 KW Output Heating capacity - 19.8 kW Suitable for electric supply of 380 +/- 10 % volts & 3N~ 50 hz All interconnecing wiring/cabling between heat pump and electric panel & control valves, NRV, Piping etc complete. The heat pump shall have an in-built facility to start /stop depending on variation in demand at different periods.

Design, Supply, installation, testing & commissioning of SS 316 horizontal hot water storage tank (Capacity 3000 Ltrs) suitable for minimum 5 Kg /Sqm working pressure. Tank shall be provided with water flow meter at inlet (approved by department of weights and measures), inlet / outlet, overflow / drain connection with MH cover 6 mm thick SS tank, pressure relief valves, pressure gauge at inlet / outlet with isolation cock, thermometer at inlet / outlet. All the valves & accessories shall be suitable for an operating pressure of 5 Kg/sq.cm. Tank shall be insulated with 100 mm thick Glasswool/Rockwool of density 80kg/M3 & cladding with 24 gauge aluminium sheet.. Tank shall provided with 15 mm dia testing spout with valve (inlet temperature to hot water storage tank 60-65 deg.C). The flanges shall be machined from SS304 sheets with dimensions confirming to ANSI, B 16.5 No. 150. The nozzles shall be SS pipes. (Tank shall be fabricated as per unfired pressure vessel code IS 2825-1969, IS 226 / IS 2062). Hot water mixing tank of3000 ltrs capacity complete with insulation, MS supporting structure with access ladder duly paint with red oxide, face piping, valves etc complete..

Providing, installation, testing and commissioning of following pumps suitable for 415 Volts connected with T.E.F.C. induction motor, M.S.channel, base plate complete with vibration isolators, isolating valve on suction and discharge, non return valve on discharge, pressure gauges with stop cock and dial type thermometer on suction or discharge. The pump shall have mechanical seal. The pump shall be SS casing, impeller, shaft and CI (Epoxy coated) base & EPDM Mechanical seal (suitable for hot water temperature up to 85 deg C.) including Valves, NRV, Strainers, Pressure Gauge, Thermometer & Cabling etc. complet in all respects. Hot Water circulation Pumps in Heat pump and tank. Pump (2 Nos. 1W+1SB) Flow - 3.0 m3/hr Head - 25 mtrs

Hot Water Return Pumps Pump (2 Nos. 1W+1SB) Flow - 1 LPS Head - 18-20 mtrs

SEWERAGE SYSTEM Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m. All kinds of soil Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia.

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5m, but not exceeding 3m. (Rate is over corresponding basic item for depth upto 1.5 metre). Pipes, cables etc, exceeding 80mm dia but not exceeding 300mm dia

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Extra for every additional lift of 1.5m or part thereof in: All kinds of soil (Manhole)

Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design. 200 mm diameter

Constructing brick masonary circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1 :3:6 mix (1 cement : 3 coarse sand : 6 graded 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design: 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter confirming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With Sewer bricks conforming IS : 4885

With Sewer bricks conforming IS : 4885

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 250 to 300 mm diameter

Supply of Grease separator ECO-JET-OD NS 04 with sludge trap capacity 400 Ltrs. according to DIN EN 1825, for free standing installation, of polyethylene, material LLD-PE, with grease storage capacity 200 liters, total wastewater capacity 830 liters, with direct suction, with connecting flange DN 65 PN 10 For local suction line R 2 1/2”, with fire hose quick coupling B with 2 odour proof maintenance openings DN 350 inlet and outlet DN 100. With max dimensions: 770x2000x1680mm With Inspection Windows & Filling Device.(Make : ACO Part No. 3554.64.41 or Equivalent)

Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes confirming to IS: 16098 including all fittings wherever required e.g., tees, bends of any degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer recommondation etc. including testing of joints etc. complete. 200 mm OD

STROM WATER DRAINAGE Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m. All kinds of soil Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia.

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5m, but not exceeding 3m. (Rate is over corresponding basic item for depth upto 1.5 metre). Pipes, cables etc, exceeding 80mm dia but not exceeding 300mm dia

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Extra for every additional lift of 1.5m or part thereof in: All kinds of soil (Manhole)

Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40mm nominal size) up to haunches of S.W/RCC pipes including bed concrete as per standard design. 250 mm diameter

Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes confirming to IS: 16098 including all fittings wherever required e.g., tees, bends of any degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer recommondation etc. including testing of joints etc. complete. 250 mm dia. pipe

Constructing brick masonary circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1 :3:6 mix (1 cement : 3 coarse sand : 6 graded 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design: 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter confirming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m to 1.67m. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Constructing bricks masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

WATER SUPPLY,DRAINAGE PUMPS & WATER TREATMENT EQUIPMENTS Supply, installation, testing & commissioning of vertical inline multistage pumping set (Imported) with Stainless steel body, impeller, casing, shaft and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundations, 80x40 mm I section base plate bolted to cement concrete foundations complete.Vendor to submit performance curves and technical catalogue of the proposed model for review and information. Filter Feed Pump ( Dom. Water) at Water Supply Pump Room Set of Two Pumps ( 1 Working+ 1 Standby) Capacity 2.0 LPS Head 25 M. HP 1.5 HP Approxi.

Supply, installing, testing and commissining of fixed speed hydropneumatic system mounted on a common base plate comprising of vertical inline multistage pumping set with Stainless steel-304 body, Stainless steel-304 impeller, Stainless steel-304 casing, shaft of Stainless steel-316 and C.I. base & head with mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 60 litre capacity M.S diaphragam tank with interchangeable butyl rubber membrane,dual type pressure switch, complete in all respects including suction and delivery headers of Stainless steel-316 grade pipe of required dia, isolation valves, NRV of PN-25 grade & vibration eliminators on both suction & delivery side of pumps,power box, equipped with fuses/ isolators/circuit breakers as required. For Domestic Water Supply at Terrace Level Set of Two Pump (1 Working + Standby ) Capacity - 3.5 LPS Head - 20.0 M. H.P. - 2.0 HP (Approx.)

Supply, installing, testing and commissioning of submersible open impeller non-clog pumps with C.I.body and to TEFC submersible motor for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, guide pipe and chain in built level controller, sequence running controller, arrangement for both pumps together inacase of emenegency, audible hooter for failure or flooding, dry running Protection complete in all respects., painting, testing and commissioning complete with approved quality and make as required as per instruction of site incharge. (Pumps shall be installed in a set of two pumps One working and One standby) Basement Drainage Pump (Pumps to be suitable to handle solids upto 30 mm size) Capacity - 4.0 LPS (Each) Head - 12 M H.P. - 2.0 HP Approx.

Supply Installation,Testing & Commissioning of vertical self supporting Filter fabricated from MS sheet as per IS: 2825, ((minimum thickness of shall 6 mm and dished end 8 mm)) pressure gauges, sample cock, GI class 'C' face piping, CI butterfly valves and all accessories , with initial charge of filter media including anthracite, painting inside with epoxy paint and outside with two coat of red oxide primer and two or more coat of synthetic enamel paint, testing and commissioning complete. :-Dual Media Filter For Domestic Water Supply Capacity- 7200 LPH Filtration rate- 14000 LPH/Sqm. Filter dia approx. - 800 MM Working pressure: 3.0 Kg/sq cm. Test pressure : 4. 5 Kg/sq cm

Activated Carbon Filter For Domestic Water Supply Capacity- 7200 LPH Filtration rate- 14000 LPH/Sqm. Filter dia approx. - 800 MM Working pressure: 3.0 Kg/sq cm. Test pressure : 4. 5 Kg/sq cm

Supply Installation,Testing & Commissioning of metering pump type chemical doser with 100 lits. HDPE chemical grade solution tank,injection fitting assembly,suction and delivery hose upto the point of injection, capacity 0-6 lph, complete in all respects. Chlorination of Domestic Water

Supplying, installing, testing and commissioning controllers with low voltage relays, stainless steel probes and PVC shroud wiring from tank top to probes of required. To start pump when water level is low in Domestic Water U.G. tank and shut off pump when Domestic Water U.G. tank is full. Also to stop when water level is low in raw water underground tank.

To start pump when water level is high in sump and shut off pump when sump is empty. Both pumps are start when sump is over flowing.

Providing and fixing GI pipes complete (IS:1239 Heavy Class) with GI fittings and clamps including MS pipe supports, enamel paint as per specifications cutting and making good the walls etc. complete. 50 mm dia

65 mm dia

80 mm dia

100 mm dia

Providing & fixing butterfly valve tested to a pressure not less than 10 Kg/Sq.cm. Including rubber gasket, 2 nos. Table-E flanges, nuts, bolts, washers & painting complete as required. 50 mm dia

65 mm dia

80 mm dia

100 mm dia

Providing & fixing dual plate CI wafer type check valve tested to a pressure of 25 Kg/sqcm. Including rubber gasket, 2 nos. table-E flanges, union, nuts, bolts, washers & painting complete as required. 50 mm dia

65 mm dia

Providing and fixing resilient rubber neoprene lined style arch vibration eliminators suitable for raw water upto 45 deg.C. Temperature working pressure upto 20 Kg/Sqcm. 50 mm dia

65 mm dia

Providing and fixing heavy duty armoured cables 1.1 KVA grade including necessary support clamps at ceiling level and connection lugs complete in all respects. Power cable Copper 3 core 10 sq.mm

Power cable Copper 3 core 4 sq.mm

Control cable copper 2 core 1.5 sq.mm

FIRE HYDRANT SYSTEM Providing and fixing mild steel pipes conforming to I.S.1239 (Heavy class) including all fittings like anchor fastners, couplings, bends, elbows, tees, flanges etc. welding as required, application of anti-corrosive treatment to buried pipes by 4 mm thick multi layer PYPKOTE membrane applied over a coat of primer as per manufacture's recommendations, including necessary trenching, refilling etc. complete. 100 mm dia

150 mm dia

Providing, laying, jointing, testing and commissioning of following sizes of MS Heavy Duty pipes with all accessories like all fittings (standard GI/MS fitting with welded/Screwed joint shall be used on the pipes as per local bye lows) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fasteners) or angle iron, G.I. pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Engineer in charge. / Consultants requirements including cutting holes and chases in brick and making good the same to original conditions complete in all respects. All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head. Including two coats of synthetic enamel paint of approved shade over a coat of primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both direction arrow as per the approval of the Engineer in charge. 25mm dia IS : 1239

80 mm dia IS : 1239

100 mm dia IS : 1239

Providing & fixing SS fire hydrant single landing valve with 80 mm NB flanged inlet ( Table-E Flange) , SS spindle controlled 63 mm dia female instantaneous outlet type. SS coupling, blank cap, chain, twist release type lug & all accessories Conforming to IS standards. Including flanged tapping from wet rise complete as required. Single Landing Valve (For Internal & External Hydrants)

Providing and fixing first aid fire hose reel wall mounting swinging type fitted with 20 mm dia 30 m long high pressure ( 10 Kg/cm2) themo plastic hose tube conforming to IS: 12585 Type II with 5 mm outlet Gun Metal nozzle with shut off valve (I.S. 884-1969).

Providing and fixing of Non-percolating flexible hose (RRL type-'A' with EPDM Lined) ISI marked (IS:636) 63 mm dia x 15 M long complete with instantaneous type stainless steel 63 mm dia. IS marked Male and female couplings (IS:903) bound and rivetted to hose pipe with stainless steel rivets and 1.5 mm copper wire.

Providing and fixing standard short size stainless steel branch pipe with SS nozzle 16 mm dia outlet with standard instantaneous type 63 mm dia coupling.(IS:903)

Providing and fixing of gun metal Fire Brigade connection (Suction collecting head) consisting of 63 mm dia instantaneous type male coupling with built-in check valves and 150 mm dia.flanged outlet complete with bolts, nuts and rubber insertions as required as per IS:904-1983. (One for fire tank, One for sprinkler riser & One for wet riser connections) Four Way.

Providing and fixing of gun metal fire Brigade Suction Hose coupling (Draw-out Connection) with nut for female coupling as per IS:902- 1974 complete with 100 mm dia. G.I. Suction pipe and 100 mm dia. 1No. C.I. Foot valve flanged (to be connected to static water tank).

Providing and fixing of Air cushion tank (air-vessel) 250 mm dia. x 1.0 M high with dished top made of minimum 6 mm thick M.S. pipe/plate complete with 25 mm dia brass Air Valve (Ball valve, pressure guage type), 25 mm dia. Stop with brass stop cock, nipple, tees, elbow and all accessories as required including fixing brackets.

Providing and fixing 25 mm dia. forged brass ball valve suitable for test pressure of not less than 15 kg / sq.cm. Cost shall be inclusive of providing necessary union / flange connection).

Providing and fixing MS partly glazed single/double hung lockable shutter fabricated from MS section as required with 5 mm thick glass for fire station complete including stove enamelled painting of door and frame and words "Fire Hydrant" written on glass, suitable to accommodate 2 Hydrant landing valves, 1 fire hose reel, 2 nos.15m long 63 mm dia hose,1-branch pipe, 1no. fire man's axe, fire extiguishers 2 nos, including suitably mounted on a raised masonry platform as required. (Approx.size 0.90 m x 2.1m )

Providing and fixing dial type pressure gauge with isolation cock and pipe at hydrant station. Dial diameter 100 mm caliberation, 0-15 kg

Providing & fixing butterfly valve tested to a pressure not less than 25 Kg/Sq.cm. Including rubber gasket, 2 nos. Table-E flanges, nuts, bolts, washers & painting complete as required. 80 mm dia

100mm dia

Providing & fixing dual plate CI wafer type check valve tested to a pressure of 25 Kg/sqcm. Including rubber gasket, 2 nos. table-E flanges, union, nuts, bolts, washers & painting complete as required. 100mm dia

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

FIRE SPRINKLER SYSTEM Providing, laying, jointing, testing and commissioning of following sizes of MS Heavy Duty pipes conforming to IS: 1239 with all accessories like all fittings (standard GI/MS fitting with welded/Screwed joint shall be used on the pipes as per local bye lows) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fasteners) or angle iron, G.I. pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Engineer in charge. / Consultants requirements including cutting holes and chases in brick and making good the same to original conditions complete in all respects. All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head. Including two coats of synthetic enamel paint of approved shade over a coat of primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both direction arrow as per the approval of the Engineer in charge. 25 mm dia

32 mm dia

40 mm dia

50 mm duia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

Providing and fixing 15 mm dia gunmetal sprinkler head with quartz bulb and set to operate at specified temperature. Temperature of operation 68 deg. C. Pendent/Upright type

Side wall type ( Normal Throw)

Providing and fixing 25 mm dia inspecting & testing assembly with built in bye pass arrangement and connection to drain line. (Giocomini)

Providing & fixing butterfly valve tested to a pressure not less than 15 Kg/Sq.cm. Including rubber gasket, 2 nos. table-E flanges, nuts, bolts, washers & painting complete as required. 80 mm dia

100 mm dia

150 mm Dia

Providing and fixing electricaly operated flow indicating switches System Sensor in sprinkler branch line on each floor with necessary junction box installed in accessible place. (Wiring from switches to panel not included) 100 mm dia

Providing and fixing of copper conductor PVC covered control cables from individual flow switches on each floor to annunciation panel installed in fire control room including sleeves, cable clips, supports for horizontal runs making connection to each switch complete. 2 colre 1.5 Sqmm

Providing and fixing dial type pressure gauge with isolation cock and pipe. Dial diameter 100 mm, caliberation 0-15 kg

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm dia

FIRE PUMPS & ACCESSORIES Supply, installation, testing and commissioning of electric motor driven high pressure centrifugal fire hydrant /sprinkler pump, suitable for automatic operation consisting of the following: Horizontal multi stage, split casing pump , suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ AC supply. The installation shall be complete with flexible coupling and coupling guard as required. Fire pump shall have CI casing, CS diffusers, bronze impeller (hard finished and dynamically balanced) and SS (304) shaft with mechanical seal, capable for head as required to ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or top most hydrant / sprinkler. The installation shall be complete with necessary pressure gauge on delivery side. Squirrel cage induction motor, TEFC type suitable for operation on 415 volts, 3 phase 50 HZ A.C supply, for the above pump with synchronous speed of 1450 RPM, conforming to IP 55 protection & class B insulation. The motor shall conform to IS 325-1978 (up to date). Common base frame for (a) and (b) from M.S. Channel for required size. Suitable RCC / cement concrete foundation with plaster and MS angle epoxy coated edging (design and drawing to be provided by the Contractor. Complete with anti-vibration arrangement of cushy foot mountings. Capacity - 1620 LPM Herad - 80 M HP - 50 HP (Approximate)

Supply, installation, testing and commissioning of Diesel Engine driven fire pump suitable for automatic operation comprising of the following and conforming to BS 649/IS 10002 all amended upto date. Horizontal multi stage, split casing pump , suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ AC supply. The installation shall be complete with flexible coupling and coupling guard as required. Fire pump shall have CI casing, CS diffusers, bronze impeller (hard finished and dynamically balanced) and SS (304) shaft with mechanical seal, capable for head as required to ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or top most hydrant / sprinkler. The installation shall be complete with necessary pressure gauge on delivery side. Heat exchanger cooled (secondary cooling) diesel engine of speed 1500 RPM suitable for the above pump with automatic starting mechanism and other accessories including fuel tank (fabricated from 6mm MS sheet, painted with two coats of synthetic enamel paint over a coat of primer) of capacity adequate to sustain pump operation for 8 hours continuous working. The tank shall be fitted with Magnetic oil level indicator, MH with cover, drain valve, air vent including structural supports (painted with approved shade), 2 Nos. x 12 volt battery (alternator of engine and panel is suitable for 12 volt current rating) with stand heat exchanger with necessary piping connections & fittings complete as required.Two nos 50 mm dia PRV with 4 nos of valve and pressure guage to supply water to heat exchanger. Common base frame for (a) and (b) from M.S. Channel for required size. Suitable RCC / cement concrete foundation with plaster and MS angle epoxy coated edging (design and drawing to be provided by the Contractor. Complete with anti-vibration arrangement of cushy foot mountings. Capacity - 1620 LPM Head - 80 M.

Supply, installation, testing and commissioning of jockey pump (pressurisation pump) comprising of the following: Vertical centrifugal multi stage pump, suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ A.C supply. The installation shall be complete with Flexible coupling and coupling guard, complete as required. The pump casing shall be CI, shaft shall be SS & impeller/ shaft sleeve/casing wearing ring shall be bronze. The pump shall be provided with mechanical seal The system shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side. Squirrel cage induction motor TEFC type for operation on 415 V, 3 phase 50 Hz AC supply for the above pump with a synchronous speed of 2900 RPM as required. Common base plate for (a) and (b) from M.S. channel as required size. Suitable RCC / cement concrete foundation with plaster and MS angle epoxy coated edging (design and drawing to be provided by the Contractor. Complete with anti-vibration arrangement of cushy foot mountings. Flow : 180 LPM, Head : 80 mts

Supply, installation, testing and commissioning of electric motor driven high pressure centrifugal water curtain pump, suitable for automatic operation consisting of the following: Horizontal single/multi stage, single outlet centrifugal end suction pump , suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ AC supply. The installation shall be complete with flexible coupling and coupling guard as required. Fire pump shall have CI casing, CS diffusers, bronze impeller (hard finished and dynamically balanced) and SS (304) shaft with mechanical seal, capable for head as required to ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or top most hydrant / sprinkler. The installation shall be complete with necessary pressure gauge on delivery side. Squirrel cage induction motor, TEFC type suitable for operation on 415 volts, 3 phase 50 HZ A.C supply, for the above pump with synchronous speed of 2900 RPM, conforming to IP 55 protection & class B insulation. The motor shall conform to IS 325-1978 (up to date). Common base frame for (a) and (b) from M.S. Channel for required size. Suitable RCC / cement concrete foundation with plaster and MS angle epoxy coated edging (design and drawing to be provided by the Contractor. Complete with anti-vibration arrangement of cushy foot mountings. Terrace Pump 900 LPM @ 35 M. Head

Providing & fixing 150 mm diameter MS Class ‘C’ for diesel engine exhaust pipe (including all fittings, clamps, steel support) of suitable dia for the diesel engine. The pipe shall be provided insulation with fibre glass wool and wraped with 24g. aluminium sheet complete with all respect.

Supply, Installation, Testing & Commissioning of double flanged vertical air vessel fabricated shell from 10 mm thick & dished ends 12 mm thick M.S.plate, suitable for working pressure of 18 kg/cm2 and test pressure of 27 kg/cm2, 450 mm dia and 2.00 m high for fire pumps complete with four nos dual setting pressure switches to operate jockey and main pumps at drop of pressure as given in the specifications.

Providing and fixing alarm system for fire pumps comprising audible hooter and red blinking lamp wired to pressure switch including cost of pressure switch mounted on air vessel complete in all respects.

Providing and fixing heavy duty PVC insulated, PVC armoured conductor cables 1100 V grade including necessary support clamps and connection lugs complete in all respects. Power cable 3.5 core 95 sq mm aluminium conductor armoured cable

Power cable 3 core 10 sq mm Copper conductor armoured cable.

Providing and fixing 250 mm dia suction header fabricated from 8 mm thick M.S. plate rolled and welded pipe suction header with inlets & outlets of 150/100/80 mm dia as required,all outlets and ends with flanged connections blank flanges, painting with one coat of zinc chromate primer and two or more coats of synthetic enamel paint to give an even shade, structural supports as required common for fire hydrant and sprinkler systems.

Providing and fixing 200 mm dia delivery header fabricated from 8 mm thick M.S. plate rolled and welded, with with 150/100/80/50 mm dia inlets & outlets as required , including painting with one coat of zinc chromate primer and two or more coats of synthetic enamel paint to give an even shade and required structural supports. All outlets and inlets to be provided with MS flanges, the cost of which shall be included in the rate of header.

Providing & fixing butterfly valve tested to a pressure not less than 25 Kg/Sq.cm. Including rubber gasket, 2 nos. table-E flanges, nuts, bolts, washers & painting complete as required. 80 mm dia ( Lever Operated)

100 mm dia ( Lever Operated)

150 mm dia ( Lever Operated)

200 mm dia ( Gear Operated)

Providing & fixing dual plate CI wafer type check valve tested to a pressure of 15 Kg/sqcm. Including rubber gasket, 2 nos. table-E flanges, union, nuts, bolts, washers & painting complete as required. 80 mm dia ( Lever Operated)

100 mm dia ( Lever Operated)

150 mm dia ( Lever Operated)

200 mm dia ( Gear Operated)

Providing and fixing resilient rubber neoprene lined single arch vibration eliminators with unit control suitable for raw water upto 450C temperature working pressure 12 kg and test pressure 20 kg/cm2. 80 mm dia.

100 mm dia

150 mm dia

MCC for Fire Fighting Pumps at Terrace Providing and fixing 150 mm dia CI `Y' strainer with bronze perforated sheet basket including rubber gasket, flanges, nuts, bolts and washers, complete as required.

FIRE EXTINGUISHER Providing and fixing carbon-di-oxide type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Capacity 4.5 Kg.

Providing and fixing mechanical foam type fire extingushers consisting of welded M.S. trolley mounted cylindrical body, squeeze lever discharge valve fitted with pressure discharge hose, discharge nozzle, trolley etc., ISI marked as per IS:IS:13386 finished externally with red enamel paint. Capacity 50 lit (D.G.Room)

Providing and fixing carbon-di-oxide fire extingushers trolley mounted with all accessories internal discharge tube,high pressure discharge hose,discharge nozzle, ISI marked as per IS:2878 finished externally with red enamel paint. Capacity 22.5 kg.

Providing and fixing ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Capacity 6.0 Kg.

POINT WIRING Wiring for the following light points with 2.5 sq. mm PVC insulated copper conductor wires of 1100 Volts grade in Concealed PVC conduits including providing and fixing 6 amp flush type switches, approved modular cover plate for switch boxes & earthing with 1.5 sq. mm PVC insulated copper conductor earth wire. (item including the rate of circuit wiring). One point controlled by one 6 amp switch.

Same as item No.1 above but Loop Point i.e. wiring of point looped from first point with 1.5 sq. mm PVC insulated copper conductor wire (controlling switch in item no.1).

Wiring for the following light points with 2.5 sq. mm. PVC insulated wires of 1100 Volts grade in Concealed PVC conduit and controlled by 10 amp MCB complete and earthing with 1.5 sq.mm PVC insulated Copper Conductor earth wire. (The cost of MCB has been taken elsewhere in the tender). One point controlled by 10 amp MCB.

Same as item No. 3 (a) above but loop point i.e. wiring of point looped from first point with 2.5 sq. mm PVC insulated copper conductor wire.

Wiring for 6 amp light plug outlet / Exhaust Fan socket with 1.5 sq. mm PVC insulated copper conductor wires in Concealed PVC conduits including providing and fixing 6 amp switch, MS box for housing switches sockets, modular cover to outlet boxes and earthing with 1.5 sq. mm PVC insulated copper conductor earth wire.

Same as item No. 5 (a) above but loop point i.e. wiring of point looped from first point with 1.5 sq. mm PVC insulated copper conductor wire.

Wiring for 2 Nos. 6 amp light plug outlet with 1.5 sq. mm PVC insulated copper conductor wires in Concealed PVC conduits including providing and fixing 2 Nos. 6 amp switch, MS box for housing switches sockets, modular cover to outlet boxes and earthing with 1.5 sq. mm PVC insulated copper conductor earth wire.

Same as item No. 5 (a) above but loop point i.e. wiring of point looped from first point with 1.5 sq. mm PVC insulated copper conductor wire.

Wiring for 6/16 amp power outlet points with 6 sq. mm PVC insulated copper conductor wires of 1100 Volts grade in Concealed PVC conduits as called for including providing and fixing 16 amp flush type 6 pin socket and switch, MS outlet box for power outlet. approved modular cover to outlet box and earthing. with 4.0 sq. mm PVC insulated copper conductor earth wire.

Same as item No. 5 above but Loop Point i.e. wiring of 6/16 amp looped from first point with 4 sq. mm PVC insulated copper conductor wire.

Wiring for 6/16 amp power outlet point with 4 sq. mm PVC insulated copper conductor wire of 1100 Volts grade in Concealed PVC conduits including providing and fixing 16 amp flush type combined 6 pin sockets and switch, MS box for 16 amp socket and switch, approved modular cover to outlet box and earthing with 2.5 sq. mm PVC insulated copper conductor earth wire. (Only one outlet shall be connected to each circuit).

Wiring for 16 AMP power outlet point with 6 sq.mm PVC insulated copper conductor wire of 1100 volts grade in Concealed PVC conduits including providing and fixing 15 AMP 3 pin socket and switch, MS Box for 16 AMP Socket and switch, approved modular cover to outlet boxes and earthing with 4 sq mm PVC insulated copper conductor earth wire.

Supplying and fixing of 20 amp 3-pin (phase, neutral and earth) for 1-phase industrial socket outlet including 16 gauge MS outlet boxes of suitable size, 20 amp DP MCB, and a plug top, complete as required and as per specifications.

Supplying and fixing of 32 amp 3-pin (phase, neutral and earth) for 1-phase industrial socket outlet including 16 gauge MS outlet boxes of suitable size, 32 amp DP MCB, and a plug top, complete as required and as per specifications.

Supplying and fixing of 32 amp 6-pin (phase, neutral and earth) for 3-phase industrial socket outlet including 16 gauge MS outlet boxes of suitable size, 32 amp TPN MCB, and a plug top, complete as required and as per specifications.

Wiring for 16 amp power outlet points with 6 sq. mm PVC insulated copper conductor wires for the first socket outlet and 4 sq. mm PVC insulated copper conductor wires for the second outlet of 1100 Volts grade in Concealed PVC conduit as called for including providing and fixing 16 amp flush type 6 pin socket and switch, MS outlet boxes for power outlets. approved modular cover to outlet boxes and earthing. with 4.0 sq. mm PVC insulated copper conductor earth wire. (Only two outlet shall be connected to each circuit for Hand Drier).

Wiring for the following light points with 2.5 sq. mm. PVC insulated wires of 1100 Volts grade in exposed MS conduit controlled by 10 amp MCB complete and earthing with 1.5 sq.mm PVC insulated Copper conductor earth wire. (The cost of MCB has been taken elsewhere in the tender). One point controlled by 10 amp MCB

Same as item No. 1 (a) above but loop point i.e. wiring of point looped from first point with 1.5 sq. mm PVC insulated copper conductor wire and earthing with 1.5 sq. mm PVC insulated copper conductor earth wire.

Wiring for 16 amp power outlet points with 6 sq. mm pvc insulated copper conductor wires for the first socket outlet and 4 sq. mm PVC insulated copper conductor wires for the balance 5 outlets of 1100 Volts grade in exposed 16 gauge MS conduit as called for including providing and fixing 16 amp flush type 6 pin socket and switch, MS outlet boxes for power outlets. approved modular cover to outlet boxes and earthing. (One shaft will have One circuit in which all the 6 sockets are powered by the same circuit which are provided at every floor).

Wiring for 16 amp power outlet points with 6 sq. mm pvc insulated copper conductor wires for the first socket outlet and 4 sq. mm PVC insulated copper conductor wires for the balance 1 outlets of 1100 Volts grade in exposed 16 gauge MS conduit as called for including providing and fixing 16 amp flush type 6 pin socket and switch, MS outlet boxes for power outlets. approved modular cover to outlet boxes and earthing. (One shaft will have One circuit in which all the sockets are powered by the same circuit which are provided at every floor).

CONDUIT & WIRING FOR TELEPHONE Supply and installation plug in type telephone socket outlet along with metallic boxes of suitable size on surface or in recess including cutting the wall and making good the same as required. Telephone Jack RJ -11

Supply and installation of telephone tag block of following sizes in sheet metal enclosure of suitable dimensions fabricated out of 14 SWG sheet steel with castle key lock, hinged type cover including termination of telephone cables, making connections, painting of box etc. complete as required. 10 pair

100 pair tag block in weather proof enclosure.

Supplying and laying armoured telephone cable made of annealed, tinned, electrolytic copper conductor on existing Tray / Conduit. 0.61mm dia 10 pair

0.61mm dia 20 pair

0.61mm dia 50 pair

Supplying and installation of following sizes of black enamelled PVC conduit in concealed/on surface including all accessories, M.S. junction/ pull boxes, G.I. fish wire, fixing hardware etc including chasing the wall/floor and plastering the chased portion and making good the damages etc.,complete as required. 20 mm dia PVC Conduit

25 mm dia PVC Conduit

32 mm dia PVC Conduit

40 mm dia PVC Conduit

50 mm dia PVC Conduit

Supplying and drawing of following size PVC insulated PVC sheathed annealed tinned copper conductor 0.61 mm dia telephone wires Cable in existing PVC conduit/ cable trays/ hume pipes/ wireways etc complete as required. 2 Pair

Supply and installation of ladder type/perforated type cable trays of the following sizes fabricated out of perforated MS sheets of minimum 2 mm thick with 75 mm flange to be installed horizontally or vertically and shall be duly painted. The cable tray shall be complete including cost of bends, elbows, cross, tees, reducers etc as per drawings/site condition and rate shall include cost of anchor fasteners, screws, nuts, bolts and misc. other fixing hardware etc as required. 300 mm wide

150 mm wide

Supplying and installation of following sizes of black enameled PVC conduit in concealed including all accessories, M.S/C.I Junction/pull boxes, GI fish wire, fixing hardware etc including chasing the wall/floor & plastering the chased portion & making good the damage etc complete as required. 25 mm dia conduit.

20 mm dia conduit.

Supply, installation, testing & commissioning of following tap off boxes, for CATV system :- Two way

Three way

Supply, installation, testing & commissioning of following splitter boxes :- 2 way splitter

4 way splitter

6 way splitter

10 way splitter

Supply, installation, testing & commissioning of line extended amplifier 47-862 MHz with return path as per specifications.

Supply, installation, testing & commissioning of RG-11 coaxial in the existing conduits for TV System.

Supply, installation, testing & commissioning of RG-6 coaxial cable in the existing conduits for MATV.

Supplying & installation of Co-Axial TV outlet with grid plate in GI/MS box including cutting, chases, fixing of GI boxes, cover plate & socket.

SUPPLY & INSTALLATION OF DB’S, CABLES & SUB MAIN WIRING. The rates shall include testing, commissioning and coordination and the following: 2 mm thick MS boxes with dust proof, vermin proof covers and lockable arrangements, mounted flush with surface of wall. Earthing all components, frame etc. Painting of all metal parts with approved enamel paint. Effecting, adequate and proper connections at terminations. Providing lugs, solder etc. at joints and terminations as called for. All fixing accessories such as brass saddles, brass screws rawl plugs etc.etc. Design, manufacture, supplying, fixing in position, testing and commissioning of the following sheet metal fabricated, wall mounting type / fully recessed in wall, indoor, cubical type with IP 42 degree of protection double shutter complete with interconnections with single core PVC insulated copper wires, tapes, bonding to earth &d powder coating etc. as required. 10 WAY TPN DB 63 Amp TPN MCB of 10 KA breaking capacity. 3 Nos. 40 Amp DP ELCB of 100 mA sensitivity (one in each phase). 30 Nos. of 10/20 Amp SP MCB's of 10 KA breaking capacity arranged in three rows. 10 way TPN DB described as above.

12 WAY TPN DB 63 Amp TPN MCB of 10 KA breaking capacity. 3 Nos. 40 Amp DP ELCB of 100 mA sensitivity (one in each phase). 36 Nos. of 10/20 Amp SP MCB's of 10 KA breaking capacity arranged in three rows. 12 way TPN DB described as above.

6 WAY TPN DB 63 Amp TPN MCB of 10 KA breaking capacity. 3 Nos. 40 Amp DP ELCB of 100 mA sensitivity (one in each phase). 18 Nos. of 10/20 Amp SP MCB's of 10 KA breaking capacity arranged in three rows. 6 way TPN DB described as above.

12 WAY SPN DB 63 Amp DP MCB with 63 Amp DP RCBO of 100 mA sensitivity. 8 Nos. of 10/20 Amp SP MCB's of 10 KA breaking capacity 12 way SPN DB described as above.

8 WAY SPN DB 32 Amp DP MCB with 32 Amp DP RCBO of 100 mA sensitivity. 4 Nos. of 10/20 Amp SP MCB's of 10 KA breaking capacity. 8 way SPN DB described as above.

Supply, storing, laying, effecting proper connections, testing and commissioning of following sizes of 1.1 KV XLPE insulated, Aluminium conductor, armoured cables for submains on cable trays including providing the MS supports and clamps for fixing to supports in an approved manner along with tags complete as required and as per specifications. 4 x 25 sq. mm

4 x 16 sq. mm

4 x 10 sq. mm

4 x 6 sq. mm

2 x 10 sq. mm

2 x 6 sq. mm

Supply and making terminal joints for the following sizes of 1.1 KV XLPE insulated, Aluminium conductor, armoured cable including providing double compression gland terminal lugs, crimping the joints effecting terminal connections to the equipment complete as required double compression gland. 4 x 25 sq. mm

4 x 16 sq. mm

4 x 10 sq. mm

4 x 6 sq. mm

2 x 10 sq. mm

2 x 6 sq. mm

Supply and installation of following sizes of ladder type MS powder coated cable trays including angle supports, bends, elbows and GI threated, suspension rods etc. including 25 x 6 mm GI tape on either side of cable trays throughout the length complete as required. 300 mm wide, 100 mm high, 2.6 mm thick.

150 mm wide, 100 mm high, 2.6 mm thick.

Supply and installation of following sizes of perforated type MS powder coated cable trays including angle supports, bends, elbows and GI threated suspension rods etc. including 25 x 6 mm GI tape on either side of cable trays throughout the length complete as required. 300 mm wide 40mm high.

150 mm wide 40mm high.

Supply, Laying, Testing, Rectification and Commissioning of wiring with all the required materials for following sub-mains with PVC insulated copper conductor 1100 Volts grade stranded flexible wires of approved maked in concealed/surface mounted heavy duty MS conduit, terminating the wires in respective panels, DBs, Switch Boxes with suitable size earth wires and associated hardwares etc. as required. 4 x 6 + 2 x 2.5 Sqmm PVC Insulated Copper Condutor 1100 Volts grade stranded flexible wires with 40mm dia conduit

2 x 6 + 1 x 2.5 Sqmm PVC Insulated Copper Condutor 1100 Volts grade stranded flexible wires with 32mm dia conduit

Supply and fixing in position GI Wire for earthing including all fixing accessories. 8 SWG

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF LIGHTING FIXTURES The fixtures shall be suitable for single phase, 50 cycles, 230 Volts, A.C. supply system. All fixtures shall be factory wired with copper conductor wires. 25W Linear stand-alone direct pendant luminaire using SMD light source and a DC constant current power supply integral to the product. LED modules conveniently snap-in to a wiring plate mounted inside the body. The luminaire is manufactured from extruded aluminium alloy 6060 and is fitted with a polycarbonate microprismatic diffuser. Ingress protection of IP40. CRI 85, 4000K, 3800lm nominal output, Lumen maintenance at L80B10 should be 60,000hrs. Luminaire should comply with This product complies with EN 62471:2008 for photobiological safety of electric lighting systems and is rated as low risk (RG1). L=1120mm,H=60mm and B=35mm

25W Linear stand-alone direct/indirect pendant luminaire using SMD light source and a DC constant current power supply integral to the product. LED modules conveniently snap-in to a wiring plate mounted inside the body. The luminaire is manufactured from extruded aluminium alloy 6060 and is fitted with a polycarbonate microprismatic diffuser. Ingress protection of IP40. CRI 85, 4000K, 3800lm nominal output, Lumen maintenance at L80B10 should be 60,000hrs. Luminaire should comply with This product complies with EN 62471:2008 for photobiological safety of electric lighting systems and is rated as low risk (RG1). L=1120mm, H=60mm and B=35mm

70W and 85mm height Circular-shaped LED pendant luminaire 1100mm dia fitted with SMD linear light sources and opal poly carbonate di user for omni-directional light distribution. CE Compliant and insulation class III, UGR<19, CRI 95 and 3000K with nominal luminaire output of 9332lm. fixture with Power supply fitted in the canopy. The luminaire is manufactured from extruded aluminium alloy 6060 profile and is made up of sections, that can be joined together with die-cast aluminium joining parts. Steel suspension cables are fitted to the joining parts and allow for height adjustment of the luminaire. Epoxy powder coating is used for textured black and textured white finishes. All other finish options are produced with liquid paint. Ingress protection of IP40. Lumen maintenance at L80B10 should be 50,000burning hours.

15mmx17.2mmx1000mm aluminum profile with 14.4w LED strip light. PMMA opal matte diffuser to control glare. 24v dc, IP67, 14.4w, 60LED’s per meter, distance between 2 LED’s should be 16.7mm, 120 deg. beam angle strip light to be integrated with the profile to get uniform lighting effect. Lifetime should be L80 50.000hrs. LED strip should be CE and ROHS compliant.

15mmx17.2mmx1000mm aluminum profile with 9.6w LED strip light. PMMA opal matte diffuser to control glare. 24v dc, IP 67, 9.6w, 120LED’s per meter, distance between 2 LED’s should be 8.33mm, 120 deg. beam angle strip light to be integrated with the profile to get uniform lighting effect. Lifetime should be L80 50.000hrs. LED strip should be CE and ROHS compliant.

10W LED surface mount spot light made up of 316L stainless steel with adjustable beam angle of 10-45 degrees for lighting of tree, plants and architectural structure. Thermal management with THERMOPROTECT system which should prevent the fixture from overheating and thus ensures a long LED service life; operable temperature range - 25°C up to + 50°C. Fixture should be 3000k, 24V DC, IP 68, with M12, IP67 connector, Class 3 and CE certified.

15W LED surface mount spot light made up of 316L stainless steel with adjustable beam angle of 10-45 degrees for lighting of tree, plants and architectural structure. Thermal management with THERMOPROTECT system which should prevent the fixture from overheating and thus ensures a long LED service life; operable temperature range - 25°C up to + 50°C. Fixture should be 3000k, 24V DC, IP 68, with M12, IP67 connector, Class 3 and CE certified.

3 W LED recessed uplight fixture, connects directly to 12 V DC, with lens, especially as incidental lighting on walls and floors. Housing should be stainless steel 316 L, with hardened glass pane and mounting bracket. Thermal management with THERMOPROTECT system to prevent the spot from overheating and thus to ensure a long life. . Fixture should be 3000k, 24V DC, IP 68, with M12, IP67 connector, Class 3 and CE certified. Fixture should have plastic installation sleeve Ø 44 x 83 mm, (or 150 mm with housing plug), necessary for installation in loose materials or for setting in concrete

10W LED pivoting recessed uplight fixture, 24V connection and with lens. Housing should be stainless steel 316 L, with hardened glass pane and mounting bracket. Thermal management with THERMOPROTECT system to prevent the spot from overheating and thus to ensure a long life. . Fixture should be 3000k, 24V DC, IP 68, with M12, IP67 connector, Class 3 and CE certified. Fixture should have plastic installation sleeve Ø 80 x 150 mm for installation in loose materials or for setting in concrete.

35w fixture mounted on 4m rectangular pole for optimized light distribution for landscape area. Fixture should use Milestone EVO LED module where the LED chips are aligned upwards for reduced glare and uniform batwing light distribution. Drive current 700mA, CRI>80, 4000K, lumen output should be 3500lm-4000lm. Corrosion resistant aluminum housing, electrostatic powder coated luminaire with L90B50>118000h

1x10 watt Bulk Head Light Fixture surface mounted. LED bulkhead with LED (Light Emitting Diode) system power: 10W, luminous flux of luminaire 800lm, 4000K, neutral white, CRI 80, 230V, Direct light emission, white housing, opal diffuser, integral electronic control gear, Protection class I, IP65, IK08, L=215mm, B=132mm, H=55mm.

1x 40W LED Light fixture system power of 40W, color temperature of 4000K, CRI>80, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, energy efficient LEDs, direct light emission, linear prismatic diffuser for uniform illumination, luminous flux of luminaire 3600lm, sheet metal housing polyester powder coated white applied over a 5-stage pre-treatment, ZHLS(ZERO HALOGEN LOW SMOKE) internal wiring, integral electronic control gear, Protection class I, IP40, L=1140mm, B=74mm, H=70mm, P= max.1500 mm. Application Area- Parking ( Lower Basement & Upper Basement, subject to PoE compliant ).

Heavy duty exhaust fan for single phase 230 volt, 50HZ AC supply complete with motor, blades, frame, bracket, louver/ shutter etc as required. 250 mm Exhaust Fan

Ceiling fan complete with double ball bearing, motor, blades, downrod, canopy, capacitor, Step Type regulater etc. suitable for operation on 230 volt, 50 Hz, A.C. supply complete as required. 1200 mm

SUPPLY & INSTALLATION OF INVERTER FOR EMERGENCY LIGHTING Supply, installation, testing & commissioning of Deluxe Inverter along with Exide Black Gold batteries for 90 minutes back up (Lead acid), along with powder coated cabinet for housing the inverter and batteries, complete as required and as per specifications. 2.5 KVA

SUPPLY & INSTALLATION OF MCB/MCCB ENCLOSURE Supply, installation, testing & commissioning of 100A TPN MCCB, 25KA service breaking capacity in sheet steel enclosure along with ON indication lamp complete as required.

Supply, installation, testing & commissioning of 32A TPN MCB, 10KA service breaking capacity in sheet steel enclosure along with ON indication lamp complete as required.

Supply, installation, testing & commissioning of 25A TPN MCB, 10KA service breaking capacity in sheet steel enclosure along with ON indication lamp complete as required.

SUPPLY & INSTALLATION OF SIGNAGE LIGHTING Supply & Installation of battery backed Exit / Fire Exit Signs mounted on ceiling / wall as per site conditions of following sizes. One sided, 11” x 4”

Two sided 11” x 4”

One sided, 16” x 6”

Two sided, 16” x 6”

CCTV SYSTEM 'Indoor IP Dome Camera :- 'Supply, Installation, Testing & Commissioning of HD Indoor IR IP Dome camera with 1/3 inch CMOS Sensor or better, 5 megapixels (3072 X 1728) 16:9 format or better @ 25/30fps, Sensitivity-0.5 lx (color) 0.05 lx (mono) ,IR range 30 mtrs, Dynamic range 100 db as per IEC 62676, True day/night, Automatic Electronic Shutter, Video compression H.265+ ; M-JPEG, Quad streaming, White balance, BLC, Defog, supporting Edge/Server based Video Analytics to run minimum 6 rules together(1-Line crossing,2-Enter / leave field,3-Loitering,4-Idle / removed object,5-People counting,6-Crowd density) , Privacy Mask, Auto Varifocal Lens (zoom/focus) 3mm to 9mm lens or better, Two-way, full duplex Audio, Audio compression AAC/G.711/ L16 (live and recording), DI x 1 (Alarm Input),DO x 1(Alarm Out) , Analog video out, 60 s pre-alarm recording, camera shall support minimum 1TB SD CARD, ONVIF Profile S &G, CE, UL, FCC Certified. Operating temp range : –20°C to 50° C, POE/12V DC along with mounting accessories as per site requirement and detailed technical specification enclosed.

Outdoor IP Bullet Camera :- 'Supply, Installation, Testing & Commissioning of HD Outdoor IR IP Bullet camera with 1/3 inch CMOS Sensor or better, 5 megapixels (3072 X 1728) 16:9 format or better @ 25/30fps, Sensitivity-0.5 lx (color) 0.05 lx (mono) ,IR range 50 mtrs, Dynamic range 100 db as per IEC 62676, True day/night, Automatic Electronic Shutter, Video compression H.265+ ; M-JPEG, Quad streaming, White balance, BLC, Defog, supporting Edge/Server based Video Analytics to run minimum 6 rules together(1-Line crossing,2-Enter / leave field,3-Loitering,4-Idle / removed object,5-People counting,6-Crowd density) , Privacy Mask, Auto Varifocal Lens (zoom/focus) 2.8mm to 12mm lens or better, Two-way, full duplex Audio, Audio compression AAC/G.711/ L16 (live and recording), DI x 1 (Alarm Input),DO x 1(Alarm Out) , Analog video out,60 s pre-alarm recording, camera shall support minimum 1TB SD CARD, ONVIF Profile S &G, CE, UL, FCC Certified. Operating temp range : –20°C to 60° C, IP67, IK 10 , POE/12V DC along with mounting accessories as per site requirement and detailed technical specification enclosed.)

Outdoor IP IR PTZ Camera :- Supply, Installation, Testing & Commissioning of Outdoor IR 1080p 60fps HD PTZ Camera with 1/3" progressive scan CMOS, Effective pixels 1920 x 1080 approx, 2M pixels @60fps at all resolution, 30x Optical Zoom, (4.3-4.5) mm - (129-135) mm lens, 16x Digital Zoom, Minimum Illumination- Sense up on- Color: 0.1 lux, Mono: 0.03 lux, with infrared (IR): 0 lux , Wide Dynamic Range 90 dB as per IEC62676, supporting Edge/Server based Video Analytics to run minimum 6 rules together(1-Line crossing,2-Enter / leave field,3-Loitering,4-Idle / removed object,5-People counting,6-Crowd density) with 2DNR, 3DNR, BLC, White Balance, Mechanical switchable IR filter, Pan Range 360° continuous, Tilt Range 0° to 90°, Manual pan 0.1° ~ 240°/s, preset pan 240°/s , Manual tilt 0.1°~ 120°s, preset tilt 160°/s Presets: 256 Locations/ Tours, IR distance 150 mtrs , IR can be internal or external with full 360 degree PAN coverage, Audio- 1/1 Channel In/Out, Alarm - 1/1 In/Out, camera shall support minimum 1TB SD CARD, 16 individually configurable privacy masks, Simple single cable installation with POE+/UPoE+ or 24V AC Power Input support for indoor/Outdoor application, Defog, IP66 , ONVIF Profiles S&G, Operating temp range with IR : –20°C to 60° C, CE, UL , FCC Certified, along with power supply and mounting accessories as per site requirement as per detail technical specification enclosed.

'Supplying, installation, testing & commissioning of The IP Video Storage Appliance shall be a RAID-5 protected, all-in-one recording solution for network surveillance systems of up to 128 channels, The IP Video Storage Appliance shall come with a license for connecting 64 concurrent recordable cameras, The IP Video Storage Appliance shall offer an optional license for 64 additional concurrent recordable cameras, The IP Video Storage Appliance shall utilize “enterprise-rated” hard drives in a fault tolerant RAID-5 configuration, The IP Video Storage Appliance shall be a pre-configured video storage solution with up to 128 TB of gross storage capacity, The IP Video Storage Appliance shall offer up to 110TB of net capacity storage, The IP Video Storage Appliance shall offer a bandwidth of 550 Mbit/s, The IP Video Storage Appliance shall offer a dual port Gigabit Ethernet network interface, 8 GB system memory and an Intel Xeon Quad Core Processor, The IP Video Storage Appliance shall offer remote monitoring via a desktop application or a Web browser, The IP Video Storage Appliance shall offer an energy-efficient hot-swap redundant power supply, The IP Video Storage Appliance shall offer hot-swap SATA-III hard drives providing up to 128 TB of gross storage capacity, The IP Video Storage Appliance shall come pre-installed and pre-configured with all necessary software, The IP Video Storage Appliance shall utilize Microsoft Windows Storage Server 2012 R2 loaded on SSD drive, The Operating System of the IP Video Storage Appliance shall run solid state disks in redundant configuration, CE, UL Listed as required

Supply, installation, testing and commissioning of Industrial Grade Layer 2 Managed Switch with 24 Port PoE and 2 SFP Uplink Port with SFP Module Suitable size Rack

Supply, installation, testing and commissioning of Industrial Grade Layer 3 Managed Switch with 24 SFP Port with SFP Module

Server: Operating system Windows 2012 Server R2 (64-bit) or Windows Server 2016 (64-bit) SP1 required for > 500 cameras Windows 8.1 (64-bit) required for Management Server, Configuration Client and Operator Client on the same computer, and maximum 500 IP cameras/encoders, CPU Intel Core i7 4770 3.4 GHz (up to 3.9 GHz), RAM 8GB Minimum, Free Disk Space Minimum 15 GB We recommend having minimum 15% free disk space., Network Card 1000Base-T, Display Resolution 1280 x 1024. Bidder to mantain N:N Redundancy for VMS and Recording Server and OEM to submit Detailed architechture with Server quantity Approved Makes: HP/Dell/IBM

Client Computer PC with Operating system Windows 8.1 (64-bit, Professional or Enterprise) Windows 10 (64-bit, Professional or Enterprise, patched with Anniversary Update), CPU Intel Core i7 4770 3.4 GHz (up to 3.9 GHz), RAM 8GB Minimum, Free Disk Space Minimum 3 GB for Single Site Systems Minimum 5 GB for Enterprise Systems We recommend having minimum 15% free disk space, Network Card 1000Base-T Display Resolution 1024x768 up to 1920x1200,1TB HDD or higher, supported upto 4 Graphics card MHW-AWGC-K620, MHW-AWGC-M2000, MHW-AWGC-M4000, keyboard & mouse complete as required with 21” professional monitor (1920x1080 or higher resolution) Approved Makes: HP/Dell/IBM

Supply, installation, testing and commissioning of 42" Display Monitor Professional Grade 24X7 use

25 KVA on-line UPS with isolation transformer and 2 hrs backup

Supply, installation, testing and commissioning of LIU Panel with accessories like 24/36 Port LIU24 , Splice trays, Loaded Adaptor and Blank Plates, UTP and Optical Patch Cords , pigtails etc.

Supply and laying of Optical Fibre Communication cable (6 core, SMF, 9/125 μm, 1000 Mbps) Aumoured Cable

Supply & Fixing of 7 Meter Hight GI Pole

SITC of 50 mm HDPE Pipe

Supply and laying of 3 core 2.5 sq. mm Aumoured Power Cable

SITC of Cat 6 UTP Cable

SITC of 25 mm PVC pipe

SITC of Equipment Rack with Front and Back Locking Door, Custer Wheel, Power Panel, Ventilation Fan

ACCESS CONTROL SYSTEM Supply Installation Testing & Commissioning of Intelligent Networkable Controller capable of controlling 2 readers with I/O relays, Standard Memory programmable for Cardholder Records: 100 to 1000, suitable PSU and enclosure complete as per tender specifications. Boom Barrier)

Supply Installation Testing & Commissioning of Long Range Proximity Card Readers 24-28" read range (for Boom Barrier)

Supply, Installation, Testing & Commissioning of Boom Barrier of 3.5 -6 mtr length, adjustable, 100% duty cycle in opening/closing time 2.5-4 Sec, Hydraulic Mechanism with at entry and exist with all accessories complete as required .

Supply Installation Testing & Commissioning of Proximity Cards as per specifications

Supply, installations, testing & commissioning of PC complete with CPU, key board, 17"monitor, 2KVA on line UPS with 30 min. back-up (SMF) batteries. & A3 coloured printer as per following specifications. Intel orignal Motherboard Intel Pentium core 2 Duo 2.33 GHz, Processor. 2 GB DDR 2 RAM 160 GB Hard disk DVD Writer 17 inch TFT Monitor Multimedia Key Board Optical Mouse A-3 Size colour printer and etc. as required.

Supply Installation Testing & Commissioning of Access control software for controlling the controller.

Supply Installation Testing & Commissioning of 8 c x .5 Sq mm Reader Cable with shield complete as as required

Supply Installation Testing & Commissioning of 2 C X 1.5 Sq mm

Supply Installation Testing & Commissioning of 25 mm PVC conduit

TRANSFORMER 500 KVA OIL TYPE TRANSFORMER (OUTDOOR TYPE) Design, Manufacture, Supply, testing, Packing, Transportation and supervision for installation, testing & commissioning at site of 500 KVA 3 phase, 11 / 0.433 KV, 50Hz step down Oil type transformer copper wound with Dyn-11 connection and neutral brought out for earthing. The transformer shall be provided with (+) 5% and (-)15.0 % OFF load tap changer on HT side in step of 1.25 % each. HT side cable termination box shall be suitable for 1 No. 11 KV, 3 C x 240 sqmm XLPE aluminium (E) cable and LT side terminal box shall be suitable for terminating 800 amp 4P aluminium conductor air insulated busduct/ suitable size of Cables. The transformer shall be supplied with all accessories complete as per specifications. (Transformer shall be outdoor Type) and As per (IS 1180 PART I : 2014) Level II

SINGLE BREAKER HT PANEL Design, Manufacture, Supply at site, inspection of Consultant's/ client at Factory of 12KV, Indoor, free standing metal clad vaccum circuit breaker extensible type HT switchgear including suitable raiting protection relays, metering, indications, push buttons, copper busbars, Handle For breaker, Handle For Spring Charging, DC power pack, etc. as per the requirement detailed in specification/ SLD etc. complete as required including earthing switch. The fault withstand capacity shall be minimum 18.4 kA for 1 sec. 630A, 11kV, 350MVA, TP, horizontal drawout type, motorised spring charged, manually operated, trip free, dust & vermin proof, vaccum circuit breaker with mechanical OFF/ON indicators & provided with following: 3 Nos. epoxy resin cast CT, 15VA burden with core-1 for metering (CL-1) and core-2 for protection (CL-5P10) and of 30/5A ratio. Multi-Functional Meter with following parameters Ammeter, Voltmeter , Power factor meter range 0.5 lag to 0.5 lead., Frequency meter etc. IDMT Numerical relay with 3 elements for over current (50-200%) and 1 element for earth fault protection (10-40%). Cable box for 3C x 240 sq.mm 11kV XLPE Al. conductor cable. 6 window annunciator 11kV SINGLE PANEL BOARD - AS DESCRIBED ABOVE

MAIN LT PANEL & FLOOR PANEL Supply, Installation, Testing and Commissioning of floor mounting free standing totally enclosed indoor cubical extensible compartmentalized front operational, vertical, dust and vermin proof LT panels fabricated out of 2 mm thick CRCA sheet steel provided with hinged detachable lockable and front and back openable compartmentalized individual chamber doors including strengthening with suitable mm angle iron frame work complete as required. The panel shall be powder coated. 1 Nos. of 1000 amp (50 KA) rating motor operated spring charged four pole EDO ACB of horizontal drawout pattern for bus bar connection on outgoing side and XLPE insulated, Aluminium conductor, Armoured cable connection on incoming side. This ACB shall be PLC interlocked covering shunt trip circuit, under voltage circuit and circuit closing with the bus coupler. Multifunction meter (Conserve EM6400 or equivalent) 3 Nos. phase indicating lamps backed up with MCB. Protective devices 230 Volt A.C. shunt trip coil. 320 KVA AND 125 KVA DG Set Incoming (1 Set) Protective devices Battery Charger Bus Bars Bus coupler Outgoing Capacitor Inbuit etc. Main LT Panel with Micro PLC as described above

FLOOR PANEL 1 No. 100 Amp TP MCCB of (25 KA) service breaking capacity with heavy solid neutral link. Bus Bars Outgoing 2 Nos. 63 Amp 4P MCCB of (25 KA) service breaking capacity 2 Nos. 63 Amp TPN MCB of (10 KA). 8 Nos. 40 Amp DP MCB of (10 KA). Ground Floor Panel as described above

BASEMENT PANEL 1 No. 125 Amp TP MCCB of (25 KA) service breaking capacity with heavy solid neutral link. Bus Bars Outgoing 2 Nos. 63 Amp 4P MCCB of (25 KA) service breaking capacity. 4 Nos. 63 Amp TPN MCB of (10 KA). 4 Nos. 40 Amp TPN MCB of (10 KA).

11 KV DOUBLE POLE STRUCTURE Supply and erection of 2 pole structure for terminating 11 KV O.H supply from local electricity authority as per specifications double pole structure shall comprise of: 11 KV Lightning Arrestor: 11 KV Isolators/Fuses (Dolo): 11 KV Double Pole Structure as described above.

11 KV METERING CUBICLE Supply, installation, testing and commissioning of floor mounted, dust, damp and vermin proof, cubicle, H. T. Metering Panel made out of 2 mm thick CRCA sheet steel complete with electronic trivector meter, CT’s of 60/30/5+5 amp, 0.5 class 15 VA Burden, and PT’s of 11 KV / √3 , 110 V / √3 , 50 VA, conforming to relevant IS standard and complete as required. CT’s, PT’s and trivector meter shall be got tested and approved from local electricity supply authority.The GA drawing also shall be got approved from local electricity authorities before fabrication. The unit shall have provision for sealing and Acrylic window shall be provided to facilitate meter reading.

SUPPLY & INSTALLATION OF HT / LT & CONTROL CABLES Supply, receiving, storing, handling, laying, effecting proper connections, testing and commissioning of the following sizes of 11 KV XLPE (E) Grade aluminium individual core screened extruded inner sheath, flat strip armoured PVC sheathed cable in existing cable trenches or in hume Pipes or in trenches complete as required. 11 KV, 3C x 240 Sq. mm XLPE Aluminium cable.(From metering panel to USS)

Supplying and making terminal joints for the following sizes of 11 KV Aluminium conductor XLPE cable including tinned copper terminal lugs, insulation tape, heat shrinkable kit and meterial required to make a complete joint. 11 KV, 3C x 240 sq. mm. XLPE Aluminium armoured cable, indoor termination.

Supplying and making outdoor cable end termination with heat shrinkable jointing kit with rain shed etc. complete with all accessories including lugs suitable for the following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required. 3 C x 240 Sq.mm XLPE HT cable

Supply & Fixing X Core XX sq. mm. 600V Mineral Insulated Copper Cable with seamless outer copper sheath Fire Survival type, which can withstand 1010 Deg C for two hours as per UL standards and shall also withstand CWZ test on one single Cable as per UL 2196. The cable shall be approved by UL, and the outer sheath of the cable shall be seamless in construction ,The cable should be supplied and installed with all accessories as per UL Standards Make: PYROTENAX/nVent/TYCO/ JIULI. 4 C x 300 Sqmm Al Ar Xlpe Cable

4 C x 240 Sqmm Al Ar Xlpe Cable

4 C x 185 Sqmm Al Ar Xlpe Cable

4 C x 150 Sqmm Al Ar Xlpe Cable

4 C x 120 Sqmm Al Ar Xlpe Cable

4 C x 95 Sqmm Al Ar Xlpe Cable

4 C x 70 Sqmm Al Ar Xlpe Cable

4 C x 50 Sqmm Al Ar Xlpe Cable

4 C x 35 Sqmm Al Ar Xlpe Cable

4 C x 25 Sqmm Al Ar Xlpe Cable

Supply & Fixing of Glands & seals for above cable complete as required. Make:- PYROTENAX/nVent/TYCO/ JIULI. 4 C x 300 Sqmm Al Ar Xlpe Cable

4 C x 240 Sqmm Al Ar Xlpe Cable

4 C x 185 Sqmm Al Ar Xlpe Cable

4 C x 150 Sqmm Al Ar Xlpe Cable

4 C x 150 Sqmm Al Ar Xlpe Cable

4 C x 95 Sqmm Al Ar Xlpe Cable

4 C x 70 Sqmm Al Ar Xlpe Cable

4 C x 50 Sqmm Al Ar Xlpe Cable

4 C x 35 Sqmm Al Ar Xlpe Cable

4 C x 25 Sqmm Al Ar Xlpe Cable

Copper Flexible Cables: 4 C x 25 Sqmm Cu Flexible Cable

4 C x 16 Sqmm Cu Flexible Cable

4 C x 10 Sqmm Cu Flexible Cable

4 C x 6 Sqmm Cu Flexible Cable

Terminations: 4 C x 25 Sqmm Cu Flexible Cable

4 C x 16 Sqmm Cu Flexible Cable

4 C x 10 Sqmm Cu Flexible Cable

4 C x 6 Sqmm Cu Flexible cable

CONTROL CABLES Supply, receiving, storing, laying, making proper connections, testing & commissioning of the following sizes of 1.1 KV grade copper conductor PVC insulated armoured stranded control cables in the perforated type cable trays etc. complete as required and as per specifications. 2 core x 2.5 sq. mm cable

4 core x 2.5 sq. mm cable

10 core x 2.5 sq. mm cable

24 core x 2.5 sq. mm cable

Supply and making end terminal joints for the following sizes of 1.1 KV PVC insulated, Copper conductor armoured cables, including providing tinned copper terminal lugs, double compression brass cable glands, insulation tape, effecting terminal connections complete as required. 2 core x 2.5 sq. mm cable termination

4 core x 2.5 sq. mm cable termination

10 core x 2.5 sq. mm cable termination

24 core x 2.5 sq. mm cable termination

Ladder Type Cable Tray Supply and installation of following sizes of ladder type MS powder coated cable trays including angle supports, bends, elbows and GI threated, suspension rods etc. including 25 x 6 mm GI tape on either side of cable trays throughout the length complete as required. 750 mm wide, 100 mm high, 2.6 mm thick.

600 mm wide, 100 mm high, 2.6 mm thick.

300 mm wide, 100 mm high, 2.6 mm thick.

Perforated Type Cable Tray Supply and installation of following sizes of perforated type MS powder coated cable trays including angle supports, bends, elbows and GI threated suspension rods etc. including 25 x 6 mm GI tape on either side of cable trays throughout the length complete as required. 300 mm wide 40mm high.

150 mm wide 40mm high.

EARTHING Supply and Installing earthing stations at locations as called for with 600 x 600 x 3.14 mm. thick tinned Copper electrode 25 mm. dia medium class GI pipe, GI funnel with 20 gauge GI wire mesh masonry chamber with concrete base, RCC manhole cover with frame (300 mm. x 300 mm.) and packing the mixture of Charcoal and salt around plate electrode complete as per IS:3043 ammended till date.

Same as item no. 1 above but with 600 x 600 x 6.3 mm GI plate electrode.

Supplying and laying of the following earthing strips clamped to wall with suitable clamps saddles and fixing bolts / in ground including the cost of digging and back filling as required and complete as required to comply with IS 3043:1987 50 x 6 mm G.I. tape.

25 x 6 mm G.I. tape

50 x 6 mm Cu. tape

Providing and laying in position the following size of Hume Pipes in road crossing and paved area, including collars, joints filled with cement mortar 1:4 (1 cement : 3 coarse sand : 6 crushed stone aggregate 20 mm and down gauge) all round the pipes laid compact and finished smooth complete including sand cushioning at cable entry, etc. 300 mm dia.

200 mm dia.

150 mm dia.

Supply & installation of following sizes of 'A' class GI pipe sleeve for cable run on the structure/entry to the building including providing water tight sealant. 150 mm dia.

200 mm dia.

300 mm dia.

MAN HOLE CHAMBERS Constructing water tight brick masonry manhole with first class bricks in cement mortar 1:6 (1 cement : 6 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Foundation concrete 150 mm thick 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement plaster 1:3 (1 cement : 3 coarse sand) finished. 600 x 600 x 900mm.

SUBSTATION SAFETY AND TESTING EQUIPMENTS. Supplying and fixing of 11KV grade size 1000 mm x 900 mm wide checkered rubber matting confirming to IS 5424-1969 complete as required.

Supplying & fixing standard shock treatment charts in English & Hindi duly framed.

Providing & fixing HT danger notice plate 200 mm x 150 mm made of mild steel at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required.

Providing & fixing sand buckets 15 litres capacity filled with sand and supporting angle iron bracket as required.

Providing 11KV tested hand gloves & tool kit as required.

Providing first aid box complete as per Indian Redcross Society’s detail.

Supply, installation, testing and commissioning of Fire Extinguishers (4.5 kg CO2 with first filling) complete as required.

Supply and making of wooden board for Key Hooks. Preparation and submission of as built drawings inclusive of: a. Cable Schedule. b. Schematic Diagrams. c. Equipment Layout. d. Cable routing drawings. e. Earthing details and other related drawings. f. Vendor shop drawings. g. Log of all precommissioning test.

SUPPLY & INSTALLATION OF EXTERNAL LIGHTING & CABLING SYSTEM. Supply, handling, laying, effecting proper connections, testing and commissioning of the following sizes of 1.1 KV XLPE insulated Aluminium conductor armoured cables laid in trenches over a bed of sand, excavation of trenches, covering with bricks and back filling complete as required. 4 x 10 sq. mm. cable.

4 x 6 sq. mm. cable

Supply and making terminal joints for 1.1 KV XLPE insulated Aluminium conductor armoured cables including providing terminal lugs, crimping the joint, effecting terminal connections to the equipment complete as required. 4 x 10 sq. mm. cable joint.

4 x 6 sq. mm. cable joint

Providing and laying in position the following size of Hume Pipes in road crossing and paved area, including collars, joints filled with cement mortar 1:4 (1 cement : 3 coarse sand : 6 crushed stone aggregate 20 mm and down gauge) all round the pipes laid compact and finished smooth complete including sand cushioning at cable entry, etc. 200 mm dia. Hume Pipe.

100 mm dia. Hume Pipe.

Supplying and installing earthing stations at locations as called for with 40 mm dia GI medium class 4.5 m long pipe with 40 x 20 mm reducer and CI funnel with 20 gauge GI wire mesh, masonry chamber with concrete base, CI manhole cover with frame (300 mm x 300 mm) and bitumen paint and packing the mixture of Charcoal and salt around plate electrode complete as per IS:3043-1987.along with GI test link enclosure.

Supplying and installing earthing stations at locations as called for with 40 mm dia GI medium class 4.5 m long pipe with 40 x 20 mm reducer and CI funnel with 20 gauge GI wire mesh, masonry chamber with concrete base, CI manhole cover with frame (300 mm x 300 mm) and bitumen paint and packing the mixture of Charcoal and salt around plate electrode complete as per IS:3043-1987.along with GI test link enclosure. Supply and fixing in position the following GI tape/wires including providing all fixing accessories and effecting proper connections. 4 mm dia G.I. wire.

25mm x 6 mm GI Tape.

Supply, installation, testing and commissioning of LED Fixture of 45 Watt with 12 Hours Solar Panel with all material as required to be mounted on existing 4.5 mtr poles. (approved by Architect)

Supply, installation, testing and commissioning of 7W LED Gate Light Fixtures with all material as required. (approved by Architect)

Supply, installation, testing and commissioning of 7W LED SPOT Light Fixtures with all material as required. (approved by Architect)

Laying in position the following size of double wall corrugated pipe in road crossing. The pipes laid compact and finished smooth complete including sand cushioning at cable entry, etc. 100 mm dia. PVC Pipe (2 mm thick).

DIESEL GENERATOR AND EXHAUST PIPING. DIESEL GENERATOR. Supply, installation, testing & commissioning of 320 KVA continuous rating 415 Volts, 3 phase, 50 Hz diesel generating set raditor cooled. AC alternator coupled to Diesel Engine complete with silencer, all accessories, standard specifications tool kit, service manual, self starting device, fly wheel, coupling with guard, V belts, Electronic Governor, instrument panel, common bed plate, anti vibration isolation pads, grouting bolts, first charge of Engine Oil, Gear Oil, high speed Diesel Oil, 24 volts re-chargeable battery set and all associated equipment / work as per requirement & specifications. The 5mm thick 990 lit day oil tank with oil piping to connect the day oil tank with DG set & ball valve shall also supplied with DG set. DG set shall be provided along with PCCM 3.3.

Supply, installation, testing & commissioning of 125 KVA continuous rating 415 Volts, 3 phase, 50 Hz diesel generating set raditor cooled. AC alternator coupled to Diesel Engine complete with silencer, all accessories, standard specifications tool kit, service manual, self starting device, fly wheel, coupling with guard, V belts, Electronic Governor, instrument panel, common bed plate, anti vibration isolation pads, grouting bolts, first charge of Engine Oil, Gear Oil, high speed Diesel Oil, 24 volts re-chargeable battery set and all associated equipment / work as per requirement & specifications. The 5mm thick 900 lit day oil tank with oil piping to connect the day oil tank with DG set & ball valve shall also supplied with DG set. DG set shall be provided along with PCCM 3.3. Note: DG set must comply the CPCB norms/ Local standard (whichever is stringent) for emission standards, exhaust pipes & noise level. DG set shall be capable of withstanding without injury at 10% overload for one hour in 24 hours operation.

Exhaust Piping. Providing, fixing & installing MS class-C (thickness of 6.35 mm) exhaust pipe and all fixing accessories and hardwares. The exhaust pipes shall be insulated with 75 mm thick mineral wool (density 150 kg/m3) insulation wrapped in chicken mesh and clad with 26 gauge aluminium sheet including all support structural as required. 125 mm dia (Dimensions are without insulation)

200 mm dia (Dimensions are without insulation)

SOLAR PHOTOVOLTIC SYSTEM. Fabrication, Supplying installation, testing & commissioning of Rooftop Solar Photovoltaic system Power generation plant having following generation capacity using minium 250Wp rating Multi/mono crystalline Silicon Pvcells/Modules & accessories conforming to IEC 61215 & IEC 61730, Module Mounting Structure mounting Clips & conforming to other standard as per technical specifications and guide line of MNRE i/c Array boxes, connection inter connection, Module mounting struture, fixing arrangement on the GI/steel structure, intergation with grid & handing over, etc complete as required. 20 KWp.

Supply installation testing and commissioning of Power Conditioning Unit (PCU) consists of an electornic / string inverter (> 25 KW) 3 phase 4 wire as per following ratings. 20 KWp.

LT SYSTEM Supplying and laying the following sizes of FRLS PVC insulated copper conductor, XLPE armoured Single core cable in the existing surface / recessed steel / PVC conduit as required. 1C X 4 Sq.mm (Red & Block) DC Cable side String to AJB.

1C X 16 Sq.mm Coppper Flexible.

Supply, installation testing & commissioning of array Junction Box (Complete with Fuse base and fuse, Surge Protection Device, Blocking Diodes, String Monitor, Connectiors wiring and proper glands). 2 Input s and 1 Output 20 to 25 KW.

4 Input s and 1 Output 20 to 25 KW.

Supply, Installation, Testing and commisioning of Maintenance free and Environment Friendly Earth Electrode set comprising of 17.2mm dia 3 mtrs long solid rod of Low carbon steel , molecular Copper Bonded for a thickness of 250 microns, highly conductive ANSI NSF STD 60 Certified, environment friendly carbon based backfill compound, Loresco powerfill (each bag shall contain 20 pounds) or Equivalent, according to BS 7430 & IEEE 80 and suitable Clamp. The backfill compound should not corrode the electrode. The earth enhancement compound shall have resistivity of less than 0.12 OHM MTR as per requirements of IEEE 80 clause 14.5d. One set : Electrode 1 No of 17.2 mm dia. Power fill compound - 2 Bags (20 Pounds / 9 Kgs Each)

LIFTS. Design, manufacture, supply,transportation, installation, testing, commissioning, approvals (All local/ State/ Central statutory bodies) and handing over in satisfactory working conditions of Elevators meeting in all respects the intents of specifications & drawings complete with a) Scaffolding & minor civil, mechanical and electrical works b) Steel items with directional control of cars (as required) with ACVVVF control with scratch proof -textured stainless steel sheet enclosures, automatic centre opening car & landing doors, hard wood flooring with 25mm recess including the cost of providing 2 weeks satisfactory trial operation and testing at full design load and safely checks for sudden breaks, speed, etc. as directed and including the cost of providing free comprehensive maintenance service during Defect Liability Period of 12 months after Virtual completion and satisfactory handingover, complete as per specifications as required and as below: Note: All the passanger elevators shall be with vision panel of size 200x300mm on CAR and lobby doors. LIFTS (Without Machine Room). Passanger elevator in Shaft of dimensions 2150 mm x 1850 mm (W x D) for minimum payload carrying capacity of 13 passenger/ 884 kg (Duplex Control) having a travel speed of 1.50 metre/ sec and travel height of 30.0 Mtrs. (approx.) with 8 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Basement - 5th Floor)

Car elevator in Shaft of dimensions 3000 mm x 6000 mm (W x D) for minimum payload carrying capacity of 6000 kg (Duplex Control) having a travel speed of 0.50 metre/ sec and travel height of 10.0 Mtrs. (approx.) with 3 Stops and Microprocessor based control suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric supply complete as per specifications. (Basement - Ground Floor)

ELECTRICAL ENERGY MONITERING SYSTEM. Design, manufacture, supply,transportation, installation, testing, commissioning of Fire power monitor Panel, 4 loop with maximum of 128 voltage or voltage/current sensors connected on each loop. Maximum loop distance 2000m. Alarming time shall be less than 100 second. Inbuilt 10000 event logs. Shall have IP 30 ratings. Brand: System Sensor Model : XSS-F1.

Design, manufacture, supply,transportation, installation, testing, commissioning of Power Supply station with capacity to power 32 voltage/current sensors. Brand: System Sensor. Model : XSS-FQ.

Design, manufacture, supply,transportation, installation, testing, commissioning of Fire Power Monitor Sensor for single phase AC voltage, measurement range AC 36V～420V. Brand: System Sensor Model : XSS-V

Design, manufacture, supply,transportation, installation, testing, commissioning of Fire Power Monitor Sensor for Single phase AC voltage and current, measurement range AC 36V～420V / 100mA～5A . Brand: System Sensor Model : XSS-VA

Design, manufacture, supply,transportation, installation, testing, commissioning of Fire Power Monitor Sensor for Three-phase two-circuit AC voltage with null line, measurement range AC 36V～420V. Brand: System Sensor Model : XSS-VN3.

Design, manufacture, supply,transportation, installation, testing, commissioning of Fire Power Monitor Sensor for Three-phase two-circuit AC voltage without null line, measurement range AC 36V～420V. Brand: System Sensor Model : XSS-V3

Design, manufacture, supply,transportation, installation, testing, commissioning of Fire Power Monitor Sensor for Three-phase one-circuit AC voltage and current with null line, measurement range AC 36V～420V / 100mA～5A Brand: System Sensor Model : XSS-VAN3

Design, manufacture, supply,transportation, installation, testing, commissioning of Fire Power Monitor Sensor for Three-phase one-circuit AC voltage and current without null line, measurement range AC 36V～420V / 100mA～5A . Brand: System Sensor Model : XSS-VA3

Design, manufacture, supply,transportation, installation, testing, commissioning of Fire Power Monitor Sensor for Single-phase DC voltage and current, measurement range DC20V～220V / 1A～100A. Brand: System Sensor Model : XSS-DVA

Design, manufacture, supply,transportation, installation, testing, commissioning of Electrical Fire Monitoring Panel with 5 loop system with maximum communication distance of 1200 meters per loop and 255 detectors per loop. Comunication mode RS-458 Bus. Residual Current Alarm Value 30-999mA continuous adjustable: adjusting precision 1mA . 10000 inbuilt event log. Inbuilt thermal printer. Brand: System Sensor Model : SSDH-J620

Design, manufacture, supply,transportation, installation, testing, commissioning of Residual current Monitor Detector with Maximum of 4nos each of Residual Current transformer & Temperature Sensing Probe can be connected per detector Maximum distance between RCT & Monitoring detector is 3 meter . Alarm action value Threshold: 30- - 999mA adjustable, Temperature: 80 degrees centigrade. Liquid Crystal Digital Tube to display real time leakage in current or temperature change. Brand: System Sensor Model : SSDH-S618

Design, manufacture, supply,transportation, installation, testing, commissioning of Heat Sensor Sensor Range:55℃~140℃ Brand: System Sensor. Model: SSDH-C1.

Design, manufacture, supply,transportation, installation, testing, commissioning of Residual current Monitor Sensor for 40mA Current Rating- Cable Thickness- 42.3*33.3mm Brand: System Sensor Model : SSDH-SY40.

Design, manufacture, supply,transportation, installation, testing, commissioning of Residual current Monitor Sensor for 60mA Current Rating- Cable Thickness- 63.0*53.0mm Brand: System Sensor Model : SSDH-SY60.

Design, manufacture, supply,transportation, installation, testing, commissioning of Residual current Monitor Sensor for 80mA Current Rating- Cable Thickness- 73*56mm Brand: System Sensor Model : SSDH-SY80

Design, manufacture, supply,transportation, installation, testing, commissioning of Residual current Monitor Sensor for 160mA Current Rating- Cable Thickness- 93*56mm Brand: System Sensor Model : SSDH-SY160

Design, manufacture, supply,transportation, installation, testing, commissioning of Residual current Monitor Sensor for 250mA Current Rating- Cable Thickness-114*56mm Brand: System Sensor Model : SSDH-SY250

Design, manufacture, supply,transportation, installation, testing, commissioning of Residual current Monitor Sensor for 400mA Current Rating- Cable Thickness- 128*56mm Brand: System Sensor Model : SSDH-SY400

Design, manufacture, supply,transportation, installation, testing, commissioning of Residual current Monitor Sensor for 1000mA Current Rating- Cable Thickness- 225*56mm Brand: System Sensor Model : SSDH-SY1000

LIGHTING DIMMING SYSTEM AND SENSORS. SITC of Gateway Unit which is a Lighting management control hub working over 2.4GHz communication to control and sensor devices, WiFi capability and ethernet connectivity to server, BACnet compatible device powered by 230V ac supply similar to HON-GW-0A0-B.

SITC of Repeater unit working over 2.4GhZ Range as an extender for gateway units and sensor devices and for carrying communication signal to farther devices for faster action similar to HON-RP-0A0-B

SITC of Wireless Occupancy Sensor with the Extended Coverage of 600 sqft, working on Passive infrared technology with Frequency 2.4GHz. The sensor should be Battery-powered, and having detection area of 600 sqft for 9 ft ceiling and Wireless range up to 50ft with Battery life of 11 years similar to HON-MS-EZ-0A0-B/W

SITC of Hard Wired Lighting Control Module (02 Channel Type), for lights and Dali dimming output for ballast dimmer control and able to interact with system components like lux, PIR sensor, Gateway and pad wirelessly. Current Rating: 2A similar to Honeywell HON-LCD-0A0-B

SITC of Switching Light controller having Individual control of two set of Ballasts capable of wireless communication to occupancy sensor and ambient sensor and gateway units, working over RF Frequency of 2.4GHz and operates on 230v AC supply similar to HON-LCA-0A0-B

SITC of Linux Server: Third Party

SITC of Monitoring and control Software to manage the lighting management system across the control system devices at each floor

SITC of Compatible android Tab

DATA NETWORKING SYSTEM. Supply, Installation, Testing & Commissioning of 12 Bay (each bay upto 2TB) Rackmount NAS, Intel® Xeon E3-1245v5 Quad Core Hyper Thread 3.5GHz Max Turbo 3.9GHz, 8GB DDR4 ECC RAM expandable upto 64GB DDR4, 2xUSB3.0, 1xUSB2.0, 4x1G Ethernet Port, 2x10G Ethernet Port with 5 years of Hardware replacement warranty and 24x7 support on call warranty etc complete as per specifications and as required.

Supply, Installation, Testing & Commissioning of 10 G core switch 1/10G, L3, 24 port (8 Copper + 8 Fiber) Stackable switch with RPS with True Lifetime warranty etc complete as per specifications and as required.

Supply, Installation, Testing & Commissioning of L3 POE plus switch with 2.5G x 8 ports, 10G x 2 ports, L3, PoE+(240W) switch with True Lifetime warranty etc complete as per specifications and as required.

Supply, Installation, Testing & Commissioning of Dual Band 11 AC Access Point (WAVE2, MU MIMO, 802.11ac (4x4)), works only with Wireless Controller with True Lifetime warranty etc complete as per specifications and as required.

Supply, Installation, Testing & Commissioning of 10 access point licence with only one time costing and same from the access point OEM for virtual and user management of the network etc complete as per specifications and as required.

Supply, Installation, Testing & Commissioning of 10G Single Mode SFP+ Module etc complete as per specifications and as required.

Supply, Installation, Testing & Commissioning of 1M 10G DAC Cable etc complete as per specifications and as required.

Supply, Installation, Testing & Commissioning of Security firewall with 5 Yrs Licence and all required software as per the networking devices for 100 users etc complete as per specifications and as required.

Supply, Installation, Testing & Commissioning of fibre cable single mode etc complete as per specifications and as required.

Supply, Installation, Testing & Commissioning of CAT 6 cable etc complete as per specifications and as required.

Supply, Installation, Testing & Commissioning of RJ 45 connectors for termination of the connection and wires etc complete as per specifications and as required.

Supply, Installation, Testing & Commissioning of 9U rack complete with all accessories etc complete as per specifications and as required.

Supply, Installation, Testing & Commissioning of 42U rack complete with all accessories etc complete as per specifications and as required.

Supply, Installation, Testing & Commissioning of Secure Network Server with Authorisation and authentication requests and Queries to identity stores such as Active Directory and LDAP databases and Reporting etc complete as per specifications and as required.

Supply, Installation, Testing & Commissioning 2*14 core , 100 GB RAM, 17 TB SSD HDD populated with Min. Five Nos. SSD DISK, Min 1 x 10 Gbpe SFP+ network ports, License of virtualization software (VMware / V Centre latest version) etc complete as per specifications and as required.

AUDIO VIDEO SYSTEM. SITC of LED Projector, Laser / LED Hybrid Light sources, WXGA (1200x800) Resolution, 3500 Ansi Lumens, Light source life app. 20000 Hrs, Input 1*HDMI, 1*HDMI / DVI-D, VGA, Audio In, Output: Audio Out etc. all complete.

SITC Motorised Projection Screen, Diagonal size 120", Matt White Projection Surface, Aspect Ratio 16:10, builtin motor system with IR/RF receiver, high gain & viewing angle , Noise less Up/Down operation, Iamge Size: Min. 130' Diagonal etc. all complete.

SITC of Ceiling Mount kit for projector with all required accessories etc. all complete.

SITC of 55-inch Display Panel, 4K UHD 3840 x 2160 (16:9) Resolution, Brightness 400 nits or more, Contrast ratio 1200:1 or better, Inputs HDMI, Display Port, VGA, Video In, Audio inputs, Audio outputs etc. all complete.

SITC of Wall Mount kit for Above Display with all required accessories etc. all complete.

SITC of Wireless Presentation and Collaboration Solution, Enables wireless presentation of HD content using laptops, tablets, and smartphones, Compatible with Windows, OS X, Apple iOS, and Android, Supports up to 32 or more simultaneous presenter connections, Supports display resolutions up to Full HD 1080p and UXGA/WUXGA, Provides HDMI, VGA , USB Adapter with Wi-Fi Connectivity , etc. all complete.

SITC of Transmitter : 3x1 auto-switching, auto-detecting multi-format digital/analog inputs , Input 2 HDMI,3D, & 4K & VGA/RGB , Output HDBaseT , HDMI , 3D, & 4K , Analog-To-Digital Conversion 24-bit 48 kHz , Communications RS-232 , IR/Serial ,HDBaseT,USB ,Ethernet and control signals over a single CAT type twisted pair upto 330 ft (100 m) etc. all complete.

SITC of Receiver : 3x1 auto-switching, auto-detecting multi-format digital/analog inputs, InputHDBaseT , HDMI, 3D, & 4K, OutputHDMI, analog stereo, Analog-To-Digital Conversion 24-bit 48 kHz, Communications RS-232 , IR/Serial ,HDBaseT,USB ,Ethernet and control signals over a single CAT type twisted pair upto 330 ft (101 m) etc. all complete.

SITC of x4 4KDCI 4:4:4 Multifirmat presentation switcher and control system (either built-in or additional hardware) from the same OEM. It should have 6 x HDMI input, 2 x HDBaseT IN and 2 x HDMI Scaled out, 2 x HDBaseT out. It should have Audio Embedder & De-embedder with 6 Mic/Line level IN, 5x Analog audio IN and 2 x audio out at 50W RMS at 100 volts. It should have (inbuilt or additional) control system having 512MB RAM, 4GB Storage, 2 RS232 Ports, 4 IR Ports, 4 Relay ports and 4 Digital Input ports. It should be able to execute multiple programs and control AV equipment, accessoires, Lighting, HVAC etc from Touchscreens and keypads. It should also offer BACnet/IP for interfacing with BMS. It should have control subnet (10/100/1000 Mbps) for all the slave AV devices either inbuilt or via Network switch.e etc. all complete.

SITC of transmitter extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or better) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K , USB power port supplies power to USB powered devices , HDCP 2.2 compliant ,Passes CEC and EDID signals ,Low-profile surface mount design , Universal 100-240V power pack included

SITC of Receiver HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or better) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K , USB power port supplies power to USB powered devices , HDCP 2.2 compliant ,Passes CEC and EDID signals ,Low-profile surface mount design , Universal 100-241V power pack included

SITC of 8 channels of power switching , Support for 120 to 240 Volt 50/60 Hz lighting and motor loads , 8 voltage-driven isolated digital inputs , module 80 Amps incandescent, 40 Amps fluorescent at 120 to 240 Volts AC, 50/60 Hz etc all complete

SITC of Programmable 8 Port Relay Module & 4 digital / analogue input module 0-24 Volts DC, low-voltage relay, 6 Watts Power @ 12Volts / 240 V, 44k Input Impedence with cables & connectors as required

SITC of 10" widescreen active-matrix color Touch Panel, 1280 x 800 WXGA display resolution, Capacitive touch screen technology, Multi-touch capable, PoE or PoE+ network powered with Table top kit and power supply

SITC of Desktop Hidden Connection Box, Mechanical Locking Device, Smooth Pneumatic Support Structure, VGA with Audio, HDMI, Network / Telephone, Power , Neat & elegant topside, Input voltage: 110V-220V / 50-60Hz, 3.5 mm Audio Jack, USB, Surface Mountable Enclosure for Cables etc. all complete.

SITC of HD Video Conefernce SystemFull High Definition 1080p camera, codec, Microphone, Remote control and other accessories ITU-T H.323, IETF SIP , It should support H.261, H.263, H.263+, H.263++, H.264, H.264 SVC, H.264 High Profile or equivalent , It should support 1080p60 fps" , 64kbps ~ 8Mbps on IP or better , It should support content sharing using standard based H.239 and BFCP over SIP , It should transmit both people and content both simutaneously to the far end location. Supports hybrid access of HD and SD video terminals; supports mixed access of H.323 and SIP terminals; supports different bandwidths of different terminals.It should support G.711, G.722, G.722.1*, G.722.1C*, AAC-LD, G.726, SILK or Equivalent , 2 x RCA Linear Input, 2 x Card Head Microphone Input, 1 x HDMI Audio Input, 1 x RJ45 Digital Microphone Input 2 x RCA Linear Output, 2 x HDMI Audio Output 1 x HDMI,1 x DVI-I,1 x 3G-SDI,2 x HDMI,1 x 3G-SDI,2 x USB2.0 (Support USB flash disk, USB microphone, etc.) ,1 x RJ45: 10/100 Base-T,1 x RJ45: RS232 for VISCA ,Should be supplied with 1 High Gain Microphone Input：1080p ,Sensor：207M Effective Pixel, 1/2.8"" CMOS Lens：12x optical zoom,Horizontal Angle of view: 72.5°,PAN / Tilt: Horizontal: +/-170°, Vertical: -30~+90°,Supports auto white balance, auto exposure, auto focus Support remote camera control,Support mirroring/flip ,10 presets ,Interface：HDMI/DVI/SDI or equivalent, FEC,ARQ etc ,Should support IPV4 and IPV6 from Day One It should support atleast 1+5 sites for multiparty conference , 1000 local address book ,LDAP/Network address book, H.350" H.460, ICE , TCP/IP, DHCP, SSH, HTTP, HTTPS with SSL/TLS, RTP, RTCP, RFC3261, RFC3264, RFC2190, RFC3407, RFC2833, RFC4585(RTP/AVPF), SNTP, ARP, RTMP H.235 (AES) signaling and media stream encryption ,Administrator password, SSH/HTTPS" with 12 X Camera and Microphone etc all complete.

SITC of Shielded twisted pair CAT6 Cable (STP) complete etc as required. (as per actual)

SITC of 3' High–Speed HDMI Cable with Ethernet, resolution support 4K@60Hz (4:4:4)

SITC of 50' High–Speed HDMI Cable with Ethernet, resolution support 1080p

SITC of 3' 15–pin HD & 3.5mm Stereo Audio Cable

SITC of Rack Structure 12 U Air Cooled AV Equipment Rack with 4 Nos. of Vertical Power Strips, Cantilever Selves, Cable routing perforations, 4 No. of Spin Wheels etc. all complete.

DCN-DISR-SR (Set of 10)

DCN-DISBCM(Set of 10)

SITC of Central Control Unit for control of all microphones - One unit capable of controlling max 245 wired delegates & 245 wireless delegates - 2x32 high quality audio channel - Operation modes - Open / Override / Voice activated/ push to talk - Automatic Camera Control - Remote Microphone management by operator - Ethernet connection for configuration and computer controls - Integration with HD camera BOSCH (DCN-CCUB2)

SITC of Accessories & Cables Multicore Conference Cable 25 metre length. Bosch LBB 4116/25.

Multicore Conference Cable 2 metre length. Bosch LBB4116/02

SITC of Speakers LCZ-UM20-IN Ceiling LSP 20/30W, Metal Grille, Round, Spring Clamp

SITC of Amplifier. PLE-1ME-240-2IN 240 W Mixing Amplifier

SITC of Microphones. LBB-1949 Podium Microphne

R-300 Wireless Microphone Lapel/Headset

R-300 Wireless Microphone Handheld

SITC of Equipment Rack SITC of Floor mountable Equipment rack with openable door and power strip suitable for control equipments. Along with inbuilt fire suppression system consisting of 05 LB.(Novec-1230 DLP Assembly with automatic valve mounted on DOT approved cylinder, push in connector for tube, 05 LB (Novec 1230 gas, Mounting bracket, low pressure switch for monitoring system activation.

SITC of Cable & Conduits. PVC Pipe 25 mm

2x1.5 sq mm speaker cable

PUBLIC ADDRESS SYSTEM Network Controller (PRS-NCO3) SITC of Digital Public Address and Emergency Sound System Controller certified to International standards of Emergency Sound System EN 54 (IEC 60849) with following features : - Completely digital audio and control data transmission. - Fibre/ CAT 5 connection for digital network and connection to amplifiers and other interface. - In-built Digital Message storage with min 1GB capacity for 3 hrs of audio messages. - PC based programmable inbuilt Web server." - External Alarm Inputs /Programmable auto relay of pre recorded messages/Alarm tones/messages - Automatic Fault Diagnostic and reporting at central location- From Mic Capsule in call station uptil amplifiers and loudspeaker circuits.The system shall be able to make emergency calls (all calls) even if the network controller has failed - Freely programmable 200 level of priority/ around 50 Different chime/alarm tones, freely programmable/modifiable zone assignment and routing - Upgradation requires no changes in control equipment, - provision for more 248 zones from single controller - All Programmable through software. -Inbuilt message scheduler to schedule the broadcast of pre-recorded mesages. - 2 x 16-character LCD display and a rotary control to navigate through the menu. - 28 simultaneous audio channels available for audio transportation between any inputs and outputs - The network controller shall have 4 analogue audio line outputs. - Sampling Frequency of controller shall be equal or more then 44.1 khz. Approved Makes : Bosch/TOA/Bose

Remote Call Station with Call Station Interface (PRS-CSR+PRS-CSI) SITC of EN 54 certified Remote call station with interface unit is to be used for calling purpose and other applications with following features: - Connects to call station interface via CAT-5 cable - Up to 1 km from digital public address optical network - Built-in limiter - 2 supervised control inputs Approved Makes : Bosch/TOA/Bose

LBD-0606/10 SITC of 6W ceiling mount speaker with excellent speech & music reproduction, Max Power: 8W,Rated Power: 6Watts, Power Tapping: 6/3/1.5W, Effective frequency range(-10 dB) : 150 Hz to 15KHz, SPL at rated power (1Khz at 1 m) 108 dB, Opening Angle 1 KHz / 4 KH

Wooden Cabinet Speaker LBD-3902-L SITC of 6W wall mount speaker with excellent speech & music reproduction, Max Power: 9W,Rated Power: 6Watts, Power Tapping: 6/3/1.5W, Effective frequency range(-10 dB) : 150 Hz to 15KHz, SPL at rated power (1Khz at 1 m) 96 dB, Opening Angle 1 KHz / 4 KHz (-6 dB): 150/70

SITC of Network cable assembly 0.5m LBB4416/01

SITC of Network cable assembly 2m LBB4416/02

SITC of CAT 6 Network Cable

SITC of Floor mountable Equipment rack with openable door and power strip suitable for control equipments. Along with inbuilt fire suppression system consisting of 05 LB.(Novec-1230 DLP Assembly with automatic valve mounted on DOT approved cylinder, push in connector for tube, 05 LB (Novec 1230 gas, Mounting bracket, low pressure switch for monitoring system activation.

Supply & Fixing 2 Core 1.5 sq. mm. 950V Mineral Insulated Copper Cable with seamless outer copper sheath Fire Survival type, which can withstand 1010 Deg C for two hours as per UL standards and shall also withstand CWZ test on one single Cable as per UL 2196. The cable shall be approved by UL, and the outer sheath of the cable shall be seamless in construction ,The cable should be supplied and installed with all accessories as per UL Standards Make: PYROTENAX/nVent/TYCO/ JIULI.

Supply & Fixing of Glands & seals for above cable complete as required. Make:- PYROTENAX/nVent/TYCO/ JIULI.

FIRE ALARM SYSTEM. Supply, install, test and commissioning of addressable Networkable analogue addressable type 100% redundant fire alarm control panel with 240X64 pixel graphic LCD display with at least 6 lines of information.Panel shall be electrically supervised, incorporate 100% redundant control and monitor the integrity of all conductors. Any internal failure (System Fault), automatic changeover shall occur to the redundant processor. A critical system failure within the CIE, shall initiate a full automatic change over to the redundant control panel in standby operation. Any internal loop card/ power supply/ network card/ CPU or display failure will lead to automatic changeover to the redundant processor The panel should be equipped with sufficient numbers of loop with 10% spare capacity, with each networkable intelligent fire alarm Control Panel having SLC with capacity of 240 detectors/devices in any combination with touch key pad, inbuilt RS-485 networking circuit for peer to peer networking, inbuilt USB 2.0 Port for upload and down load the configuration tools, two inbuilt programmable inputs, two inbuilt NAC's, and operates on 240V AC + 10% with 50 Hz with built in charger. The panel shall have fire, fault relays, Option for BMS integration MODBUS converter, graphical software for provision of TCP/IP modules, Remote Access, provision of both class 'A' and class 'B' wiring in the SLC circuit, user friendly with communication facility to monitor & control the FACPs from a single window. The panel shall be suitable for minimum of 5000 event record facility, event fetch from FACP facility and the single panel shall be suitable for 200 fire fire zones and 200 Panels/Nodes in one network and shall be FM, VDS Approved along with EN- part 13 approval. 2 Loop.

Supply, install, test and commissioning of Graphics User Interface for Monitoring & Control of complete Fire Detection and Alarm Sytsem. The GUI based main network software shall network with other panels on True Peer-to-Peer network. It shall be capable of graphically representing each facility being monitored with floor plans and icons depicting the actual locations of the various systems, and / or sensors’ locations. It shall have the facility to change the sensitivity of any detector. The software shall be capable of monitoring 200 Nodes with 100 MB baud Transmission rate on Fibre Optics Network and 12 MB baud Transmission on cable and 192,000 Network points. The software shall provide the facility to Monitor, Control all the Fire Network.. The Graphic workstation shall act as an independent node communicating on the peer to peer network and shall not be dependant on the Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of GUI.

Supply, install, test and commissioning of Addressable Manual Call Point .Manual call point shall be resettable type with soft addressing feature and short circuit Isolator. The device communication with Panel shall be digital with error checking and fast response capability using flag setting. The device should provide bi-colour LED status indication with flashing LED in normal condition, that will illuminate red under alarm activation. MCP Devices must offer low current consumption of less than 100µA in both quiescent and alarm conditions. The MCP shall meet the EN54-11 and EN54-17 requirement.

Supply, install, test and commissioning of Addressable Monitor Module. The protocol must utilise digital transmission techniques combined with suitable error checking and fast response capability using flag setting and grouping options. The module shall provide bi-colour LED status indication under panel control that can flash green in normal state & steady Red LED on activation, with soft addressing and the protocol must utilise digital transmission techniques. Devices must use soft addressing methods with the address held in non-volatile memory within the main body of the device. Devices shall incorporate short circuit isolators. The Line Modules shall be third party certified to both EN54-18 and EN54-17.

Supply, install, test and commissioning of Addressable Output Module. The Output Module variants should include both volt-free changeover relay and fully supervised load switching versions and rated 30VDC 2A. The module shall provide bi-colour LED status indication under panel control that can flash green in normal state & steady Red LED on activation, with soft addressing and the protocol must utilise digital transmission techniques. Devices must use soft addressing methods with the address held in non-volatile memory within the main body of the device. Devices shall incorporate short circuit isolators. The Line Modules must offer low current consumption of less than 250µA in quiescent and nominal 6mA in alarm conditions. The Line Modules shall be third party certified to both EN54-18 and EN54-17.The Output module monitors the channel and will detect the open and short circuit conditions. The Output module with relay is loop powered an provide normally de-energised C form contacts.

SITC of Addressable Input Module. The Input module shall be loop powered and shall monitor the fire alarm devices and other auxiliary devices and shall detect open and short circuit. The module shall provide bi-colour LED status indication under panel control that can flash green in normal state & steady Red LED on activation, with soft addressing and the protocol must utilise digital transmission techniques. Devices shall incorporate short circuit isolators. The Line Modules must offer low current consumption of less than 250µA in quiescent and nominal 6mA in alarm conditions. The Line Modules shall be third party certified to both EN54-18 and EN54-17. The Input module monitors the channel and will detect the open and short circuit conditions . The Input moduleshall be loop powered and eternal power supply is not required.

Supply, installation, test and commissioning of Addressable Input /Output Module. The Output Module variants should include both volt-free changeover relay and fully supervised load switching versions and rated 30VDC 2A. The module shall provide bi-colour LED status indication under panel control that can flash green in normal state & steady Red LED on activation, with soft addressing and the protocol must utilise digital transmission techniques. Devices must use soft addressing methods with the address held in non-volatile memory within the main body of the device. Devices shall incorporate short circuit isolators. The Line Modules must offer low current consumption of less than 250µA in quiescent and nominal 6mA in alarm conditions. The Line Modules shall be third party certified to both EN54-18 and EN54-17.The Output module monitors the channel and will detect the open and short circuit conditions.The Output module with relay is loop powered an provide normally de-energised C form contacts. Combined multi-way modules shall combine input and output module functionality in the same device but still allowing independent panel control by allocating separate addresses for the circuits.

Supply, installation, test and commissioning of Strobe with soft addressing methods and shall be with low power consumption in quiescent & alarm conditions and shall meet the EN-54-3/EN-54-23 standard. It shall provide facility for volume adjustment together with offering a maximum sound pressure output of up to 98dBA. The flash rate setting shall be available with switch setting at the device.

Supply, installation, test and commissioning of addressable hooter with low power consumption in quiescent & alarm conditions and shall meet the EN-54-3 standard. It shall provide facility for volume adjustment together with offering a maximum sound pressure output of up to 98dBA.

Supply, installation, test and commissioning of Addressable Multi-criteria Photo-Thermal Detector with sensitivity range 1.4 to 3.0 per metre, as per EN54. The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react early sensing in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall have built-in bidirectional isolator, dust compensation, auto addressing and with twin bi-colour LED for 360 deg viewing. The detector shall meet the EN-54 standard latest edition.

Supply, installation, test and commissioning of Addressable Heat Detector with sensitivity, as per EN54 .It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall have built-in bidirectional isolator, dust compensation, auto addressing and with twin bi-colour LED for 360 deg viewing. The detector shall meet the EN-54 standard latest edition.

Supply, installation, test and commissioning of Response Indicators

Supply, installation, test and commissioning of Addressable Fire Fighter Phone Jack with necessary control Module, allowing Fire Fighters to make direct communication with the central control area. The fire fighters’ telephone jack consists of a single phone jack on gang plate.

Supply, installation, test and commissioning of 2 way communication Fire Fighter Telephone handset. This handset with a coiled cord. The attached plug fits Fireman’s Phone Jack, allowing fire fighters to make direct communication with a central control area.

Supply, installation, test and commissioning of 2 Core 1.5 sq. mm. 950V Mineral Insulated Copper Cable with seamless outer copper sheath Fire Survival type, which can withstand 1010 Deg C for two hours as per UL standards and shall also withstand CWZ test on one single Cable as per UL 2196. The cable shall be approved by UL, and the outer sheath of the cable shall be seamless in construction ,The cable should be supplied and installed with all accessories as per UL Standards Make: PYROTENAX/nVent/TYCO/ JIULI.

Supply, installation, test and commissioning of Glands & seals for above cable complete as required. Make:- PYROTENAX/nVent/TYCO/ JIULI.

AUTOMATIC CLEAN AGENT NOVEC-1230 FIRE SUPPRESSION SYSTEM. Supply, installation, test and commissioning of 10LB.(Novec-1230 DLP Assembly with automatic valve mounted on DOT approved cylinder, push in connector for tube, 10LB (Novec 1230 gas, Mounting bracket, low pressure switch for monitoring system activation with LPCB approval.

Supply, installation, test and commissioning of 05 LB.(Novec-1230 DLP Assembly with automatic valve mounted on DOT approved cylinder, push in connector for tube, 05 LB (Novec 1230 gas, Mounting bracket, low pressure switch for monitoring system activation with LPCB approval.

Supply, installation, test and commissioning of Flexible Linear Pneumatic Heat Detection Tube (I.D. Dia. 4mm & O.D. Dia. 6mm Dia. Operated Temp. At 100 Degree Centigrade,Colour-Red) For Automatic Fire Detection & Suppression System.(UL Listed)

Supply, installation, test and commissioning of End of Line Adapter With Pressure Gauge For Charging & Monitoring.

Supply, installation, test and commissioning of Tee-Connection as required.

Supply, installation, test and commissioning of of End Plug as required.

Supply, installation, test and commissioning of Audio Visual Alarm with wiring to make complete system operational.

VRF/VRV AC SYSTEM. Supply, Instalaltion, testing and commissioning of Variable Refrigerant Flow modular type airconditioning system(Cooling and heating) complete with indoor and outdoor units, individual remote controller and centralized controller, interconnected refrigerant piping, full charge of refrigerant gas, control cabling etc. as per detail given in specifications and having following items. The prices to be given in Indian rupees including all taxes and duties and delivered at site. Refrigerant to be used shall be-R 410 A only. OUT DOOR UNITS: Supply, Instalaltion, testing and commissioning of modular type outdoor units equipped with highly efficient scroll/twin Rotary inverter type compressors single module, heat exchanger, low noise condenser fan, vibration isolator, suitable MS painted stand, auto check function for connection error, Y joints, auto address setting of capacity as mentioned below. Outdoor unit must have inbuilt automatic variable evaporating temperature from 6 to 11deg C for better energy efficiency. 3.1 COP at ARI condition at 100% Load for cooling. All interconnecting piping, Y-joints and U bends within the condensing unit shall be painted with special coating to protect agaist severe atmosphere conditions (like Pollutied area) of clear transparent polymer coating as per specification complete as required. 10 HP HEAT PUMP.

20 HP HEAT PUMP.

22 HP HEAT PUMP.

24 HP HEAT PUMP.

VRV/VRF INDOOR UNITS: Supply, installation, testing and commissioning of below mentioned capacity VRF Ductable/4Cassette/hiwall type indoor air conditioners complete evaporator with coil, fan and fan motor, control panel with cordless remote control, cabling, power cabling, vibration isolation, necessary galvanized steel supports etc. as per specifications and drawings.IDU must have force shut adaptor to connect with fire alarm /key card to automatically switch off the machine if required. 1.3 TR Ductable unit with drain pump.

2.0 TR Ductable unit with drain pump

2.5 TR Ductable unit with drain pump

4.0 TR Ductable unit with drain pump

4.5 TR Ductable unit with drain pump

5.5 TR Ductable unit with drain pump

8.0 TR Ductable unit with drain pump

0.8 TR 4way Cassette unit with drain pump & external decorative panel

1.0 TR 4way Cassette unit with drain pump & external decorative panel

1.6 TR 4way Cassette unit with drain pump & external decorative panel

2.0 TR 4way Cassette unit with drain pump & external decorative panel

2.6 TR 4way Cassette unit with drain pump & external decorative panel

DX TFA AHU COMPATIBLE WITH VRV/VRF ODU. Supply, Installation, Testing and commissioning of factory built Ceiling mounted DX double skin type horizontal air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, and internal gasket between the skins to interrupt the thermal bridge of the panel. AHU shall be complete in all respect dampers etc. Blower section with AMCA certified DIDW fan for ceiling suspended unit with highly efficient IE3 TEFC Squirrel cage motor drive suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply and variable frequency drive (VFD) as required. Cooling coil section with Dx cooling coil with aluminium finned copper tubes (Thickness not less than 0.4mm) & puf insulated 18G stanless steel drain pan with drain connections and AHU kit (priced separately). Filter section with 50mm thick metal viscus/washable synthetic type air prefilters having efficiency 90% down to 10 micron. Necessary vibration isolation arrangement, canvas connection etc., complete as per specifications and drawing of followings capacities. CS TFA AHU: 1000 CFM (6.5 TR) 8 Row Deep Coil at 50 mm static pressure.

AIR HANDLING UNIT KIT: Supply, installing, testing and commissioning of Electronic expansion valve & control kit compatible to connect the following Dx type AHU with the VRF outdoor unit, the AHU kit should be complete with Control box for flow of refrigerant so as to modulate the capacity of AHU as and when required in sync with VRF outdoor unit, the AHU kit should have corded remote control, and capability to control the AHU fan , speed of AHU Fan. Suitable for AHU :(6.5 TR).

MAIN INTELLIGENT PROGRAMMABLE CENTRAL CONTROLLER: Supply, Installation, Testing and Commissioning of Central Controller of digital type of latest generation suitable for all VRV/VRF equipments/AHU to operate, Monitor, Scheduling Programme, On/Off, Temperature Setting etc as per specification complete as required to operate all the indoor units.

Y-JOINTS: Supply Installation, testing, commissioning of supply & return Y-joints sets of required size for refrigerant piping as per manufacturer standards. Y- Joints set

REFRIGERANT PIPING: Supply Installation, testing, commissioning and Interconnecting refrigerant copper pipe work (between indoor & outdoor units as per specifications) with (19mm/13mm thick) closed cell elastomeric nitrile rubber tubular insulation. All piping inside the room shall be properly supported with MS slotted angle, including cutting chases, holes in walls/slabs and making them good. All external piping shall run in covered cable tray (item for cable tray shall be quote seperately). Dia 6.4 mm OD 13mm thick insulation.

Dia 9.5 mm OD 13mm thick insulation

Dia 12.7 mm OD 13mm thick insulation

Dia 15.9 mm OD 13mm thick insulation

Dia 19.1 mm OD 19mm thick insulation

Dia 22.2 mm OD 19mm thick insulation

Dia 28.6 mm OD 19mm thick insulation

Dia 34.9 mm OD 19mm thick insulation

DRAIN PIPING : Providing and fixing of PVC drain pipe of 6 Kg /cm2 pressure rating complete with 6mm thick closed cell nitrile rubber insulation, fittings, supports, valves as per specifications & drawings. 25mm dia.

32mm dia.

Supply, Installation, Testing and commissioning of Plasma Air Equipment to improve Indoor air quality by using Bi-polar Ionization technology, producing equal amounts of positive and negative oxygen ions. System kill microorganism, pathogens, remove Odour, VOC and reduce dust particle /particulate matter / PM2.5 /PM 10. The product is UL / Intertek listed. Product has minimal or negligible pressure drop & low power consumptions. Ionizer producing an equal amount of positive and negative ions. The housing material is 18G steel powder coated. Models accept 24V AC input, 120V AC to 12V DC wall pack, 120V/240V AC to 12V DC power supply and 241V/277V AC to 12V DC power supply. For low capacity/volume of air ionizers & self-contained in a potted ABS box with a molded flange and mounting holes. Ionizer accept 12V DC, 24V AC, 120V AC and 230V AC without the use of an external power supply device & protected with an inline 500mA glass cartridge fuse. Suitable for 500-1800 CFM

Suitable for 1801-3000 CFM

AIR DISTRIBUTION SYATEM. Sheet Metal Duct: Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 0.63 mm sheet (24 G)

Thickness 0.80 mm sheet (22 G)

Thickness 1.0 mm sheet (20 G)

Thickness 1.25 mm sheet (18 G)

16 gauge MS duct work welded construction. Duct shall have fire rated coating compound. Fire rated coating compound used forconstruction of fire rated duct work shall be protected with minimum 0.7mm to 1mm nominal thickness tested to properties as per the requirements of BS 476: 6 & amp; 7, including non-combustibility Class O and fire propagation - Class 1 surface spread of flame & amp; materials in accordance with building regulations.

Supplying, fixing. testing commissioningof AL volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, in accordance with approved shop drawings and specifications complete as required.

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills without volume control dampers complete as required.

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications etc complete as required. Fire Damper.

Actuator

Supply and fixing of acoustic lining of supply air duct and plenum with 13 mm thick with Engineered Nitrile Rubber open cell foam with Density 140 - 180 Kg/m3 and Class 1 Fire Performance and with antimicrobial protection and should pass Fungi Resistance as per ASTM G 21 and Bacterial Resistance as per ASTM E 21 complete with manufacturer's recommended Rubber based Adhesive in a blend of solvents etc complete as required.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class "O") insulation on existing duct after applying two coats of cold setting adhesive (CPR X compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. 19 mm.

Supplying, installing and testing of extruded aluminium louvers with bird screen in accordance with approved shop drawings and specifications complete as required.

Supply, Installation and testing of GI back draft gravity damper for fan in accordance with the approved shop floor drawings and specifications, and shall also confirm to the BIS specifications.

Supply, fabrication, installation and testing flexible canvas connections constructed of fire resistance flexible, double canvas connection as per the approved shop drawings.

Supply, installation, testing & commissioning of Constant Volume Flow Limiters, Mechanically System Powered with High-quality plastic control damper and casing stainless steel, leaf spring & silicon free oscillation damper. It should be Factory Calibrated and can be Adjusted at Site with Independent of orientalion in installation.Contorl range should be ± 10 % of Set Flow. complete as per specifications. etc complete as required. 100CFM.

IAQ system For Fresh Air. Supply, installation, Testing & Commissioning of IAQ system for outdoor air areas, heavy gauge extruded alluminium of 1.5 mm nominal thickness complete with ultra low leakage (aerofoil construction) extruded aluminium profile volume control damper, Rapid Average Pitot tube; Air Flow Straightner (Honey-comb Patterned) with Motorized Assembly for Dampers with programmable, DCV Controller that Communicates on Bacnet over MS/TP; differential pressure sensor; & step down transformer of 24V. IAQ device with integral AFMS

Controller for IAQ Station

Integrator for BMS communication

Actuator & CO2 sensor.

DP sensor for TFA

CAT-5 cable

2 core x 1 sqmm

AXIALS FANS. SITC of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles, vibration isolator and directly coupled TEFC to Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. The complete fan assembly shall be BSEN-1210-3-2002/UL listed for 250 Deg C 2 hours in accordence with power ventilator for smoke control systems and as per specification complete as required. Air Qty. = 4500 CFM. Static Pressure = 25mm Wg. Fan Speed = Not exceeding 1450 rpm

Air Qty. = 3500 CFM Static Pressure = 25mm Wg Fan Speed = Not exceeding 1450 rpm.

SITC of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled TEFC to Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. as per specification complete as required. Air Qty. = 7000 CFM. Static Pressure = 25mm Wg Fan Speed = Not exceeding 1450 rpm

Air Qty. = 8000 CFM. Static Pressure = 25mm Wg. Fan Speed = Not exceeding 1450 rpm.

Air Qty. = 10000 CFM. Static Pressure = 25mm Wg. Fan Speed = Not exceeding 1450 rpm.

Circular/Rectangular inline type Fans/Fan section. Supply, Installation, Testing and commissioning of circular/rectangular exhaust air fan suitable for Inline mounting comprising of forward curved centrifugal blower complete with induction motor, double casing coated rectangular fan section , canvas connection all compete as required. Motor shall be suitable for single phase, 230 volts, 50Hz AC. supply as per specifications of following capacities: Noiselevel should not exceed 65dB(A)at 3 meter in room condition. 200 cfm capacity with10 mm static pressure Circular.

300 cfm capacity with15 mm static pressure DIDW rectangular fan section

400 cfm capacity with15 mm static pressure DIDW rectangular fan section

500 cfm capacity with15 mm static pressure DIDW rectangular fan section

Air Quantity : 300 mm Dia, 3 mm St. Pr., 900 RPM or as per OEM, fan suitable for 220± 5% volts 50 cycles, 1 phase AC Power supply as Required

Air Quantity : 450 mm Dia, 3 mm St. Pr., 900 RPM or as per OEM, fan suitable for 220± 5% volts 50 cycles, 1 phase AC Power supply as Required

Factory Fabricated Double Skin Air Washer. Supply, Installation, Testing and Commissioning of package type air cooling unit having minimum efficiency of 90% saturation with double skin casing of 0.8 mm thick outer powder coated sheet and inner sheet shall be SS-304 sheet of 0.8mm , 25 mm thick PU insulation. Fan section shall be DIDW backward curved centrifugal blower with V-belt driver TEFC type induction motor with IP-55 protection suitable for operation an 415 ± 10% voltage 3 phase 50 Hz and 1450 RPM.fan shall be with VFD. Wet section shall consist of 1.2 mm thick SS tank, CELDECK fill 200 mm thick. The tank shall have water strainer suction and drainer connection.W type PVC eliminator complete as required. 2 Nos. water circulation pump set mono block (1W+1S) with PVC piping for water distribution and 4 bend PVC water eliminators. Pump motors shall be suitable for 230/1/50 Hz /415/3/50 Hz. Air intake felling of metallic wire mesh 50 mm thick with mounting frames. Air Qty :1400 CFM Static Pressure : 45 mm wg.

DRY SCRUBBER. Supply, Installation, Testing and Commissioning of dry type Ceiling/Floor mountedDry Scrubber comprising electrostatic section multi cell type with 16 G powder coated galvanised steel sheet housing of 16 G (1.4 mm) thick system, bottom drain and metallic mesh filter. The electronic air cleaner shall be the two- stage dual voltage plate type cells and efficiency of 90% as per ASHRAE test Standard for dry particulate. Ionizing- collecting cell of one-piece construction. Power supply shall be 100% solid state. on 200 to 240 VAC, 50HZ, 1Phase input with an LED light indicating the performance status. All unit shall be with factory fitted UV lamp as per specification etc complete as required. Capacity: 1600 CFM

Supply, installation, testing and commissioning of Suitable SISW Backward Exhaust Air Fan in metalic construction complete with TEFC Induction Motor, Drive Assembly, Base Frame, Vibration Isolators and other accessories etc as per specification complete as required. Capacity: 1600 CFM Static Pressure : 35 mm wg.

Supply and erection of hot dip G.I. cable tray perforation not more than 17.5% for specific dimensions along with tees, bends. The cable tray shall be hang from ceiling/ fixed to wall with necessary angle/flat iron / hanging rod, for ceiling suspensions, clamps, anchor fastner, nuts, bolts, washers, not mor than 1.5 mtr. apart complete as per specification to complete the job. The tray shall be as follows :- 100 x 50 mm x 1.6mm thick

150 x 50 mm x 1.6mm thick

200 x 50 mm x 1.6mm thick with cover

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm dia. ISI marked, steel conduit

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm dia. ISI marked, PVC conduit

WIRING IN CONDUIT / PVC CASING CAPPING WITH COPPER CONDUCTOR. Supply,& drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the reccessed steel/pvc conduit as required. 2x 1.5Sq mm.

4x 2.5sq.mm

CABLES. Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed copper conductor armoured cables including, anchor fastners on wall with suitable clamps, saddles fixing bolts connecting testing and commissioning etc as per specification complete as required. 4.0 core 6 Sq mm Cu

4.0 core 10 Sq mm Cu

EARTHING SYSTEM. Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing aling with existing surface/recessed conduit/submain wiring/cable as required. 6 SWG

CENTRAL CONTROL STATIONS Supplying, Installing, Testing & Commissioning of the Central Control Stations consisting of the following : Supply, installation, testing and commissioning of Intel Core i3 (I-3 Processor (Latest Generation), - 8 GB RAM, 1 TB hard disc, -3½” disc drive, DVD writer, compatible CDROM, Windows 10 and shall have MS-Office installed, As per specification, Mouse, Key board

Colour Monitor TFT- 22''

Colour Printer (A4 size)

UPS 6KV for DDC

SOFTWARE. BMS System Software : Web Based Graphical Software meeeting the requirements in the Given I/O Summary and technical specifications including configuration and facility to create / provide the graphic mapping for all I/O Summary points , animate the Graphics, Navigation between pages, display of logs, changing the time zones, popup alarms, configurable password protection for Building Management System as per Specifications. Software shall be able to communicate with Lonworks, Bacnet, Modbus devices simultaneously, with unlimited user capacity. Same software can be utilized as programming / commissioning software of DDC, NAC etc. (All required Software with original license competent with BMS software)

Web Based Router / Network Area Controller interfacing the DDC controllers and Integrators for the system with PC. It has capacity to store trends & program backup. It should be BTL & UL Listed and shall be of the same make as DDCs. Supplying, Testing & Commissioning of the interface for MODBUS RTU / Bacnet for 3rd Party Devices. Device should have hybrit port for MSTP & RS485. The price shall include the necessary integrator / gateway, software required for integration as per I/O point Summary. Pums Controller. Lifts

CONTROLLERS. UL and BTL Automation stations/DDC Controller. The controllers shall be 32 bit microprocessor based standalone with real time clock. The DDC's shall be capable of peer to peer communication with other DDCs and then to router Also with locable MS mounting cabinets duly powder coated connector strip, internal wiring and space to house controller & relays, connector strip current transformer, MCB, internal wiring. (Contractor shall confirm his I/O provision w.r.t requirement on basis of data point). DDCs requiring more than 2 additional Plug in type IO Module cards or expansion modules to suffix the requirement of required inputs/outputs are not acceptable. Use of AI to DI multiplexer is also not acceptable. DDCs shall be compact factory fitted with IO Points. DDC controller for followings equipments. DDC for AHU's Ceiling Suspended AHU's (max 1 AHU/DDC). DDC for Ventilation Fan. DDC for Lifts. DDC for LT/ HT Panel. DDC for DG.

SENSORS & FIELD DEVICES. Supply, installation, testing & commissioning of the following Sensors : DP switch, air - blower & Filter

Duct Temp. Sensor

DP Transmitter

Current Relay

CO2 sensor

CABLING & CONDUTING. Supply, Installation, Testing & Commissioning of the following cables as per the specifications: Unshielded Twisted pair Signal Cables, 2 C X 1.0 Sq.mm.

Shielded Twisted Pair Communication Cables, 2 C X 1.5 Sq.mm.

20mm GI Flexible Conduit

CAT-6 Cable

Manufacturing, providing and placing in position machine made factory assembled Furniture for Administrator Cabin MAIN TABLE -1500mm X 750mm X 740(H) , Return Storage of Dimensions 900mm x 450mm x 740mm , and Back Storage of Size - 1500mm x 450mm x 740mm H. Main & Side Table : whose top and legs are made of 38mm. thick Particle Board (E-1 Grade), melamine finishes with matched 2 mm PVC edge-banding.E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1992). It has Netbox axial comfort 4 gang (UNIVERSAL Version).The Modesty is Particle board wood Grade E-1 (Environmental Friendly) thicness 25 mm. ,cover with Melamine Edge-Banding(PVC) 2 mm. The return desk and extension unit top is made of 19mm thick Particle Board ( E-1 Grade), with matched 2 mm. PVC edge-banding. Also legs are made of Particle board wood Grade E-1 (Environmental Friendly) thicness 38 mm. ,cover with Melamine. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality . Complete as per the direction of Engineer-in-charge BACK STORAGE: Body made of 19 mm.thick Particle Board (E-1 Grade), melamine finish with matched 2 mm PVC edge-banding.E1 grade inmelamine finish with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. Drawer Unit : 3 drawer Metal pedestal of overall dimensions internal and external dimensions 400-420 mm (W) x 500-520 mm (D) x 600-620 mm ( H). Drawer should be made of CRCA of thickness 0.7-0.8 mm duly powder coated with 70-80 micron. Each pedestal should be provided with pencil tray of 40-45 mm(H) x 110-120 mm (D) x 300-310 mm (W). Each pedestal should have 5 Nos castor fitted to it where in one castor will be fitted to lower most drawer to provide extra stability. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality with 10 years warranty. Approved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge

Manufacturing, providing and Placing High Back Revolving Chair for Administrator. Providing & Supplying High Back chairs. Chair seat made up of insert moulded Polyurethane Foam upholstered with foam laminated mesh fabric, insert moulded foam assembled over a load bearing plastic seat cover, back is made up of two piece injection moulded frame, inner frame upholstered with mesh fabric and mounted on the main assembly, back adjustable lumbar support for achieving comfortable seating posture, seat size 44.5 - 52.5 cm depth (approx.), 46.4 - 51.0 cm width (approx.), sub assembly back size 55.5 cm- 62 cm height. (approx.), effective back height from Seat - 57 cm (approx.), polyurethane foam for seat having density 50±4 kg/m3, armrest top injection moulded in polyurethane and mounted on the injection moulded height adjustable type armrest, armrest height adjustable up to 4.5 cm (approx) in 3 steps & width movement adjustable, 360 degree revolving type. mechanism, single point control for seat and back adjustment, front pivot for tilt, tilt adjustment for back in 3position locking with antishock feature, pneumatic height adjustment of 8.5 cm spine bracket made of aluminum die cast piece connecting to back with mechanism, pedestal made of nylon fitted with 5 nos. twin wheel castors (castor wheel dia. 6.0 cm approx.), base pedestal dia 65.0cm (approx.) and pitch center dia. 71.0 cm with castors, twin wheel castors injection moulded in Nylon etc. all complete as per manufacturers specification, Product should be BIFMA gold rated SCSglobal certified for inhouse air quality with 10 years warranty. Approved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge

Manufacturing, providing and placing in position machine made factory assembled Furniture for RC Cabin MAIN TABLE -2100mm X 750mm X 740(H) , Return Storage of Dimensions 1000mm x 500mm x 740mm , and Back Storage of Size - 3000mm x 500mm x 2050mm H. Worktop : whose top and legs are made of 65 mm. thick Particle Board (E-1 Grade), melamine finishes with matched 2 mm PVC edge-banding E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1992). It has Netbox axial comfort 4 gang (UNIVERSAL Version).The Modesty is Particle board wood Grade E-1 (Environmental Friendly) thicness 25 mm, cover with PVC Edge-Banding(PVC) 2 mm. The return desk and extension unit top is made of 19mm thick Particle Board ( E-1 Grade), with matched 2 mm. PVC edge-banding. Also legs are made of Particle board wood Grade E-1 (Environmental Friendly) thicness 65 mm.. SIDE STORAGE: Body made of 19 mm.thick Particle Board (E-1 Grade), with matched 2 mm PVC edge-banding E1 grade with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. Drawer Unit : 3 drawer melamine finish pedestal of overall dimensions internal and external dimensions 400-420 mm (W) x 500-520 mm (D) x 600-620 mm ( H). Drawer should be made of 19mm thick E1 Grade particle board. Each pedestal should be provided with pencil tray of 40-45 mm(H) x 110-120 mm (D) x 300-310 mm (W). Each pedestal should have 5 Nos castor fitted to it where in one castor will be fitted to lower most drawer to provide extra stability. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality with 10 years warranty. Approved Make :- Rockworth/ Herman Miller/ Haworth/ SteelCase. Complete as per the direction of Engineer-in-charge. BACK STORAGE: Body made of 19 mm.thick Particle Board (E-1 Grade), melamine finish with matched 2 mm PVC edge-banding.E1 grade in melamine finish with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. Glazed front is made of 4 mm. float glass with colored film in dark grey aluminum frame.Handles:Extruded Aluminum handles Legs:1.5 mm. thick epoxy powder coated 80-90 microns, tube legs, 38 mm. diameter. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality with 10 years warranty. Approved Make :- Rockworth/ Herman Miller/ Haworth/ SteelCase. Complete as per the direction of Engineer-in-charge.

Manufacturing, providing and placing in position high back Chair for RC Cabin, Revolving type, Providing and placing in position High back Chair. The seat and back are made up of 1.2cm.thick hot pressed plywood and upholstered with pure leather and moulded Polyurethane foam. The Back size shall be 750mm. (W) X 750mm (D) 1200 mm. (H). The seat size : 530 mm. (W) X 465mm. (D) x 480mm (H)The chair has 360 degree Revolving type , Front pivot synchro tilt mechanism, 5-position locking with anti-shock back mechanism.The HR Polyurethane foam is moulded with density=50+/-2 kg/m cube and hardness load 16+/-2 kgf as per IS:7888 for 25% compression. The seat and back are arrested together with a spine made of 0.8cm thk. HR steel finished in crome. The seat shall have a depth adjustment of 6 cm. The seat back tilting ratio shall be 1: 18. Adjustable armrests. The pedestal is made of die-cast aluminium with buffing finished. It is fitted with 5nos. twin wheel castors. The pedestal is 67.0cm pitch-center dia ( 77.0 cm with castor). The twin wheel castorsAre injection moulded in Black Nylon. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality with 10 years warranty.Approved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge

Manufacturing, providing and placing in position visitor for RC Cabin. Providing and placing in position visitor leather chair. The seat and back are made up of 1.2cm.thick hot pressed plywood and upholstered with pure leather and moulded Polyurethane foam. The Back size shall be 600mm. (W) X 530mm (D) 940 mm. (H). The seat size : 530 mm. (W) X 465mm. (D) x 480mm (H).The HR Polyurethane foam is moulded with density=50+/-2 kg/m cube and hardness load 16+/-2 kgf as per IS:7888 for 25% compression. The seat and back are arrested together with a spine made of 0.8cm thk. HR steel finished in crome. The seat shall have a depth adjustment of 6 cm. The seat back tilting ratio shall be 1: 18. The armrest tube assy. is made of crome cladded with pure leather. Sledgebase leg frame welded assembly made of aluminium die cast on frame etc. all complete as per manufacturers specification. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality with 10 years warranty. Approved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge

Conference Table/ Staff Dinning & Common Room ON RC Floor. Worktop :Worktop Made of 25mm thick E-1 grade particle board finished with 2mm ABS edge banding. E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house air quality. This should comply with (EN 120-1992). The exposed edge of worktop shall be secured with 2mm thick PVC edge banding tape of approved colour. The height of Worktop shall be 740-760 mm from ground level. The particle board should be E-1 Grade with pvc edge banding. Understructure: MS understructure with 75mm x 75mm C type square leg , well supported with beams under table top.Completely conseled MS wiremanagement and trays. Angle - 90 degree, Powder coating - 80-90 Microns, made up of Thk - 2mm metal. Wire management: Completely conseled wiremanagement with vertical wire uptake from floor via middle leg having removable cover one side and wire seperator for data and wire seperation, segregates to hozizontal cable tray below fipper. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality with 10 years warranty. Approved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge. Meeting Table Size :- 2400mm X 1200mm X 740 H--- 8 seater.

Conference Table Table Size :- 8000 mm X 1500 mm X 740 H - 26 Seater

Chair for Administrator Visitor, Reception, Meeting Room and Conference Room. Providing medium back revolving chairs. Chair seat made up of insert moulded Polyurethane Foam upholstered with foam laminated mesh fabric, insert moulded foam assembled over a load bearing plastic seat cover, back is made up of two piece injection moulded frame, inner frame upholstered with mesh fabric and mounted on the main assembly, back adjustable lumbar support for achieving comfortable seating posture.Armrests should be adjustable with 120-160 mm adjustability with PU padded.Base: Black nylon base with 5 nos. nylon castors.Chair should be of 360 degree swivel Posture Control with multi pointer locking and synchro tilt mechanism and hydraulic gas lift gas lift to allows 90-100 mm. of height adjustment. Seat size 440 - 550 mm depth, Seat width of 530-550 mm Seat Height of 420-510mm with hydraulic height adjustability of 90-100mm. Sub assembly back size 550 - 620 mm height. Effective back height from Seat - 570mm, polyurethane foam for seat having density 50-55 kg/m3. Pedestal made of nylon base fitted with 5 nos. twin wheel castors (castor wheel dia. 60-70 cm), base pedestal dia 60-70 mm and pitch center dia. 700-720mm with castors, twin wheel castors injection moulded in Nylon etc. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality with 10 years warranty.Approved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge

Manufacturing, providing and Placing Sofa for Reception/Living/Waiting area/ . Wooden structure of sofa to be fabricated using good quiality hardwood duly seasoned and applying anti-termite paint of approved brand & manufacture to ensure stability of the frame, On the wooden base frame of the sofa to be provided with M.S. helical spring, sides & back with jute strips, with polyfill covered with jute & finished with thick marking cloth before doing final finished with Leatherite have basic cost not less than 1200/- Pet Mt. Seat - 35-40Kg/cum density PU Foam, 100mm thick, Back - 35Kg/cum density PU foam, 60mm thick, Sides (inside) - 35 Kg/cum density PU Foam, 45 mm thick Sides (outside) & back (back side) - 32 Kgcum density PU foam, 25mm thick. Seat shall rest on SS square frame of size 25mm x 25mm supported on legs made from solid wood of height 225mm. All SS work should be in grade 304. Base of sofa should be infilled with suitable woode sections so as to give proper support to the seat. Height of the base of sofa shall be 200-250mm(approx). Finished width of arm shall be 100mm after upholstery work. Sofa to be fully upholstered using approved Leatherite of A grade of desired shade duly embossed including providing & fixing of all other related materials including hardwares etc. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality with 10 years warranty. Approved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge. 3 seater sofa overall dimension - 1970mm W x 860mm D x 800mm H

2 seater sofa overall dimension - 1400mm W x 860mm D x 800mm H

1 seater sofa overall dimension - 820mm W x 860mm D x 800mm H

Manufacturing, providing and Placing Centre Table for Reception/Lounge/Waiting area . Providing and fixing centre table Rectangular in Shape Size 1200mm X 600 mm width X 450 mm high, with top framework made in 19mm thick commercial ply inclusive of all general hardware like screw, nails, synthetic adhesive etc. & then shall be finished in veneer (V2) with polyester finish. Base structure shall be in seasoned SYP pine wood around it 19mm thick flexi ply green / equivalent made shall be fixed. The Table top should be protected with 12mm thick toughened Glass. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality with 10 years warranty.Approved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge.

Manufacturing, providing and Placing Side Table for Reception/Lounge/Waiting area. Providing and fixing tables Size 600 mm x 600 mm X 450 mm high , with top framework made in 19mm thick commercial ply inclusive of all general hardware like screw, nails, synthetic adhesive etc. & then shall be finished in veneer (V) with polyester finish. Base structure shall be in seasoned SYP pine wood around it 19mm thick flexi ply green / equivalent made shall be fixed. The Table top should be protected with 12mm thick toughened Glass Product should be BIFMA gold rated SCSglobal certified for inhouse air quality with 10 years warranty.Approved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge

Customised Reception table. Work top shall be made of 38mm thick Pre laminated (4mm Veneer with Melamine Polish and ABS lipping) particle board interior grade of approved shade conforming to relevant IS code and equivalent BS and CIDB norms. Bottom shall have a backing laminate of minimum 0.6 mm thickness. The front edge of work surface shall be provided with machine pressed 2 mm thick ABS lipping glued with hot melt EVA glue. For any of above type of Work surfaces- Non-working edges of the work surface shall be provided with machine pressed 0.5 mm thick ABS lipping glued with hot melt EVA glue. Under structure: Legs are made up of 38mm thick Pre laminated (4mm Veneer with Melamine Polish and ABS lipping) particle board interior grade of approved shade conforming to relevant IS code and equivalent BS and CIDB norms. Side return with Storage: Side return Storage (1Drawer+2 Shelve with Shutter) and its top shall be made of 25mm thick Pre laminated (4mm Veener with Melamine Polish) particle board interior grade of approved shade conforming to relevant IS code and equivalent BS and CIDB norms. Inside faces shall have a backing laminate of minimum 0.6 mm thickness. All Visible edges shall of machine pressed 2 mm thick ABS lipping glued with hot melt EVA glue and non visible edges shall be provided with machine pressed 0.5 mm thick ABS lipping glued with hot melt EVA glue. Wire management: Completely concealed wire management with vertical wire uptake from floor via middle leg having removable cover one side and wire separator for data and wire separation, segregates to horizontal cable tray below flipper including provision of all Electrical Switch, Socket, Flap out Cover, accessories completes satisfying to Electrical/LV/AV requirement and as per direction of engineer/employerApproved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge. AT Stilt level ( U Shape ) - Size ( 3600 X 1200 ) - 3600 Front and 1200 on both sides

Manufacturing, providing and Placing Canteen Table on Ground Floor and Living Room Dinning Tables. Structural Frame to be made in 30mm x 50mm x 1.6mm thick powder coated MS box section welded with MS clamp made out at of 3 mm thick MS plate at corners . Table top to be made in 25 mm thick MDF with woodan Laminate . Table top to have 2mm radius at the on all edges. Table to be fixed with the frame with required fittings. Soild Wood legs to be made out of 90mm x 90mm x 606mm solid oak wood with adjustable metal leveling screws (M10) at the bottom . Legs to be fixed to the structural frame with M8 D- Nut and M8 Philips head bolt . Metal Finish : All metal components to be in textured matte Black colour with powder coating not more than 60 micron . Wood Finish : - Natural Finish with 2 Coat PU Coating .Product should be BIFMA gold rated SCSglobal certified for inhouse air quality with 10 years warranty. Approved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge. The Table should of Size 1200x600x750-- Canteen table Ground Floor

The Table should of Size 1200 X 1200 X 750 mm --- LiVing Room Dinning Tables

Canteen Chairs for Canteen and Dinning Table. The chair should have a Size of 600 mmLong X 550 depth X 775 mm High. Chair frame work made in seasoned SYP wood pine or equivalent with mortise joint. The seat is made of PU ‎foam with Density ‎9 ‎kg minimum 100 mm thick of Cool foam or equivalent after this . The upholstery in Leatherite of desired color. The Wooden frame and back shall be of seasoned wood pine in desired finish Product should be BIFMA gold rated SCSglobal certified for inhouse air quality with 10 years warranty. Approved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge

Manufacturing,Providing and Placing in Position the Cushioned Chair in Guest Rooms. The chair should have a Size of 600 mmLong X 550 depth X 775 mm High. Chair frame work made in seasoned SYP wood pine or equivalent with mortise joint. The seat is made of PU ‎foam with Density ‎9 ‎kg minimum 100 mm thick of Cool foam or equivalent after this fabric of 32 density 1'' to 2'' as required on seat, arms & back. On top of this poly fil for shape and extra if required on seat & back. The upholstery in fabric using thread of 30 no. Himalayan brand or equivalent. Loose cushions are made in 50% cotton and 50 % Poly fill than covered in marking then in fabric. back cushion in softy foam 100mm thk. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality with 10 years warranty. Approved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge .

Manufacturing,Providing and Placing in Position the Small meeting Table in Guest Rooms. factory made meeting table of 2 Pax of size dia 600mm. Worktop :Worktop Made of 25mm thick E-1 grade particle board finished with 2mm ABS edge banding. E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house air quality. This should comply with (EN 120-1992). The exposed edge of worktop shall be secured with 1.2mm-1.5mm thick PVC edge banding tape of approved colour. The height of Worktop shall be 740-760 mm from ground level. The particle board should be E-1 Grade with pvc edge banding. Understructure: MS understructure with Dia 100 mm MS Pipe, well supported with beams under table top.Completely conseled MS wiremanagement and trays. Angle - 98 degree, Powder coating - 80-90 Microns, made up of Thk - 2mm metal.Approved Make :- Rockworth/ WeSource/Spacewood/Godrej. Complete as per the direction of Engineer-in-charge.

Manufacturing,Providing and Placing in Position Double bed for Guest Rooms along with 8 inches Spring matteress. Size- 86'' long x 84'' wide x 15'' high, Bed outer frame shall be finished in 19mm thick commercial ply with burl veneer which is in PU finish, inner frame work in seasoned SYP pine wood with zigzag metal spring. After that casement fabric to be fixed on it. Front legs are in teak wood with PU & rear side in caster.Approved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge.

Manufacturing,Providing and Placing in Position TV Cabinets for Guest Rooms. Size 72''long X15''depth X30''high , high with framework made in 19mm thick ply inclusive of all general hardware like screw, nails, synthetic adhesive etc. Counter Front shall be finished in veneer (V1) with PU as specified. Drawers shall be made in 12 mm thick ply with soft closing Quadra channel / Bloom, Hettich/ equivalent & visible sides shall be finished in veneer with PU polish & inside of drawer finished in laminate. Edges of drawer finished with edge binding tape. Top of counter in stone (S1) with polyester finish.Approved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge.

Manufacturing, provinding and placing in Position of Single beds for Dormatory of Size 900mm (W) X 2050 (L) X 750 ( H) with Head rest. Head Board & Foot Board made up of 18 mm Prelam MDF Board. Side Rail & Foot Board made up of 25mm thick Prelam MDF board. Legs are made up of 25 mm thick PVC foiled MDF with joint free Foil and Fold process. All Exposed edges are sealed with 0.45mm thick PVC edge-band from Rehau. Support structure of Bed made up of M.S. Pipe 25x25x1mm thick duly powder coated through seven tank process of Powder Coating. All Wooden panel are stained to pass 4H test of scratch resistivity. .Product should be BIFMA gold rated SCSglobal certified for inhouse air quality with 10 years warranty. Approved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge.

Manufacturing , Providing and Placing in Position the Single Bed matteress having Size of 36"X78"X4". Pocketed bonded foam matress of 4 inches incorporates Bonded foam 80 mm Pufoam 25 mm 23 D Maroon cloth quilting one side Mattress Size : 36"X78"X4" Fabric : Maroon as shown Therefore, the body receives an unmatched level of support, no matter what the sleeping position. The mattress shall ben’t just excellent for back, its unique construction also makes it the high point of comfort Polyester viscose..Product should be BIFMA gold rated SCSglobal certified for inhouse air quality with 10 years warranty. Approved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge

Manufacturing , Providing and Placing in Position the Study Chair in Guest Rooms. Chair Seat made up of insert moulded polyurethane foam upholstered with foam laminated mesh fabric, insert moulded foam assembled over a load bearing plastic seat cover, back made up of two piece injection moulded frame, inner frame upholstered with mesh fabric and mounted on the main assembly, seat size 52.5 cm width (approx.), 54.0 cm depth (approx.), sub assembly back size 48.5 cm max. width, 62.0 cm height.(approx.), effective back height from Seat 57.0 cm. (approx.), polyurethane foam for seat moulded with density 65±4 kg/m3, sledbase leg frame welded assembly made of SS Chrome base round tube having outer dia 24mm (approx.) and thickness 2mm., based shoes on frame etc. all complete as per manufacturers specification..Product should be BIFMA gold rated SCSglobal certified for inhouse air quality with 10 years warranty. Approved Make :- Rockworth/ WeSource / Spacewood/Godrej. Complete as per the direction of Engineer-in-charge.

Providing and fixing of signages, modular curved frame technology,of various widths and lengths, to form suggested usages,made of aluminium extruded sections , duly anodised ,all signages shall be provided with 0.6-0.8mm polycarbonate protecting film over the prints, of appropriate size, Model : Illusion by SIGNSUTRA or Equivalent. ILLUSION C-80,ROOM NUMBER

ILLUSION C-80, NAME PLATE

ILLUSION C-80, DESIGNATION PLATE

ILLUSION C-210(BOTH SIDE)WALL PROJECTED LADIES TOILET

ILLUSION C-210(BOTH SIDE)WALL PROJECTED GENTS TOILET

ILLUSION C-210(BOTH SIDE)WALL PROJECTED HANDICAP TOILET

ILLUSION C-120,DOOR PLATE LADIES TOILET

ILLUSION C-120, DOOR PLATE GENTS TOILET

ILLUSION C-120, DOOR PLATE HANDICAP TOILET

ILLUSION C-80, ELECTRICAL PANEL

ILLUSION C-40, WORK STATION NAME PLATES

DEPARTMENT NAME PLATE

DRINKING WATER

AUTHORISED PERSONAL ONLY

Providing and fixing of signages,customised to the architect's design,the signage to be made of 10 mm casted clear acrylic sheet duly cut by laser, all text to be of 2 mm thick acrylic duly laser cut, partially housed and pasted on to engraved surface of the text in the clear acrylic base, the 10mm acrylic sheet to be fixed on 25x25mm section of teak wood with help of crafted SS pins, and further fixed to the priscribed location with the help of wooden dowels,and required adhesive,as per drawing. MAIN DIRECTORY

FLOOR DIRECTORY

FLOOR LEVEL

CANTEEN

CONFERENCE ROOM

MEETING ROOM

Providing and fixing of Photoluminescent, 1mm rigid pvc based sheet containg lumingen 3, as base chemical,with high intensity luminous glow capacity. PHOTOLUMINESCENT SIGN , FIRE HOSE

PHOTOLUMINESCENT SIGN,EXIT SIGN D-10

PHOTOLUMINESCENT SIGN,EXIT SIGN D-43

PHOTOLUMINESCENT SIGN,EXIT SIGN D-14

PHOTOLUMINESCENT SIGN,EXIT SIGN WITH BRACKET D-70

PHOTOLUMINESCENT SIGN,EXIT SIGN D-87

PHOTOLUMINESCENT SIGN,FIRE ALARM CALL POINT

PHOTOLUMINESCENT SIGN, EVACUATION PLAN

PHOTOLUMINESCENT SIGN,EXIT DIRECTION SIGN

PHOTOLUMINESCENT SIGN,PULL AND PUSH

Providing and fixing of electrocut casted vinyl of approved design, of 3M, or equivalent make VINYL STICKER, FIRE HOSE

Providing and fixing of edge lit ,emergency exit sign with 2 hrs power back up, concealed in false ceiling,of PROLITE AUTOGLO make or equivalent LED SIGN (CONCEALED)with 2hr backup

EXIT LIGHT WITH 2 HR BACKUP

Providing and fixing of 1.5mm,polished,304 grade,Stainless steel plate, duly etched and filled with prescribed enamel colors to form a elevator disclamer,of size 250x250mm ELEVATOR DISCLAIMER PLATE

Providing and fixing of Snap fit frames,made of aluminium extruded profiles duly anodized , and shall be also provided with .8mm thick polycarbonate film to protect /hold the insertions. And 8mm thick MDF, as main inserion panel. SNAP FIT FRAMES

Providing and fixing prohibition signage,made of aluminium composite panel, and all text and pictograms as screen printed and malamine coated, all fixtures in 304 grade SS, all design as per architects approval. NO SMOKING

NO SPITING

KEEP SILENCE/PL SWITCH OFF MOBILE

Providing and fixing of exterior signage, to be fixed on the roof top with the help of MS framework, Signage to be made of MS pipe frame work, cladded with 3mm Aluminium composite panel, duly cut by CNC router, and the letters to be laser cut,10mm casted clear acrylic,inserted in a cut out fitted on 4 mm 040 casted acrylic, the letters front to be 3M day and night electrocut vinyl, The signage shall illuminated with back lit LED, of PHILLIPS/GE make of atleast 5Yrs gurantee, (certificate to be provided, by the makers of LED), complete in all respects organisation name in english,8000X1000MM

organisation name in hindi,8000X1000MM

LOGO,2150X2150MM

Providing and fixing of main entrance sign , made of laser cut 2mm ,304 grade brush Stainless steel,and letters to be laser cut in black acylic partially inserted in SS cut outs, the plate to be fixed on exsisting Granite with the help of SS studs

Providing and fixing of 3M film(frosted crystal)as per the design .

MILK BOILER /TEA BOILER Cap.50Ltrs. S.S.Sheet insulated body with triple jacket. The water jacket will be fitted with 2 Kw heating element. Milk outlet, water level indicator & draw off valve at the bottom & water tank. Phillips element, Elcon thermostat, GVC rotary switch, LED indicator for Power, 4mm thickness 3 core wire Rajdoot/ Plaza make

MICROWAVE OVEN Cap.20-30Ltrs. IFB-MAKE - SC-2

PICK UP COUNTER WITH OVERSHELF Size 1800X600X850+300 Top 3 sides, under & over shelf of s.s.sheet, on m.s.angle & s.s.tubular legs frame work. The counter will have 3 sides fully covered, operator side open. With one under shelf. One over shelf 300mm wide & running along the full length of counter u type heating element of 1 Kw is placed under the one head shelf to keep the dishes warm provided with toggle switch also connected with 4 mm 3 core wire.

WORK TABLE FOR SUPPORT OF TWO BURNER RANGE Size 1350x600x850mm Top & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.

TWO BURNER COOKING RANGE App. Size 1200X600X850mm Frame work of m.s.anlge duly painted, mounted on s.steel tubular legs with adjustable feet. Top & sides & under shelf of s.s.sheet. The range will be complete with 2nos. Hy-pressure gas burners with individual control valves. Cast iron pan support

EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) FOR TWO BURNER RANGE Size 1950x750x600mm Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

JUICER (table top model) Cast Aluminum/CI body, duly polished / painted, with worm & perforated insert. Top feeding tray. Worm easily cleanable fitted with 1/2HP elect. motor.

CONVEYOR TOASTER App. Cap. 100-125 Toasts/hr. S.S.Sheet body, having s.s.sheet conveyor belt. App.225mm wide. The unit will have heating elements on top & lower portion of conveyor belt with variable heat & speed control switch. (MADE IN ITALY)

WORK TABLE WITH SINK Size 1950x600x850+150 Top & Sink bowl of s.s.sheet, on s.s.anlge & s.s.tubular frame work with cross bracing at lower portion. Sink bowl will be integrally welded with top & grinded smooth. Sink bowl size 450x450x250mm.

WORK TABLE Size 1500X600X850mm Top & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.

THREE BURNER COOKING RANGE SIZE 1800X600X850 Structure made of m.s. angle of size 38x38x5mm, duly rust proof painted. Top of 16Swg thick s.s.sheet. All four side covered up to height of app. 10” by 20Swg stainless steel sheet. Bottom stainless steel stripes sheets complete with gas burners, valves p

EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for THREE burner RANGE Size 1950x750x600mm Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

LOW HT. TABLE for supporting low height burner Size 750x750x600mm Specification same as that of work table but the table will be without undershelf & will have cross bracing support at lower portion.

LOW HT. BURNER Size 750x750x600mm Specification same as that of cooking range but the unit will be without undershelf, but will only have cross bracing support at lower portion.

EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for LOW HEIGHT BURNER range Size 1650x750x600mm Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

THREE BURNER COOKING RANGE O/S 1800X600X850 Structure made of m.s. angle of size 38x38x5mm, duly rust proof painted. Top of 16Swg thick s.s.sheet. All four side covered up to height of app. 10” by 20Swg stainless steel sheet. Bottom stainless steel stripes sheets complete with gas burners, valves p

WORK TABLE for support of 03 burner cooking range Size 1500X600X850mm Top & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.

EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for THREE BURNER RANGE Size 1950x750x600mm Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

BULK COOKER/boiler TILTING TYPE Cap.160Ltrs. Specification same as Sno.13 but the frying pan will be Of rectangular shaped with 12”depth & a pouring lip & the unit will be fitted with v type high pressure gas burner with control valve & pilot lamp.

BULK FRYER TILTING TYPE Cap.100Ltrs. Triple jacketed body of stainless steel sheet, Inner most jacketed of 16g thick with 12g thick dish ended bottom, second wall for air gap of 18g stainless steel sheet & outer insulation jacket also of 18g stainless steel sheet. The unit will have counter

EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for BULK COOKER & FRYER Size 1650x750x600mm Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

WET GRINDER Cap.15ltrs (1.0HP) Stainless steel sheet constd. Body with s.s.sheet constd. Revolving drum, cromium plated pillar support on m.s.angle frame work fitted with electric motor gear box & grinding stones & coconut scraper.

DOUGH KNEADING MACHINE (CROMPTON MOTOR 2.0 HP) App. Cap of Bowl 25Ltrs. S.S.Mixing bowl, with s.s.rod/strip mixing arm, mounted on steel tubular & sheet frame work duly painted. Complete with 1.0HP Elect. Motor with control switch.

POTATO PEELER Cap.15Kg./chrgs. (CROMPTON MOTOR 1.0 HP) 16 gauge Stainless steel sheet peeling drum, lined inside with Abrasive material, stainless steel /cast iron rotating peeling disc. Top of the drum will have a potato inlet door, waste Inlet provision peeled potato discharge door & waste water Outlet pipe

PULVeRISER (Std.) (CROMPTON MOTOR 1.0 HP) Stainless steel sheet body,20g thick. the unit will have A top feeding tray & a housing of stainless steel casting With grinding plates & 3 type of meshes for variable type Of grinding requirements. The unit will be fitted with 1.0 hp single Phase electri

WORK TABLE support of pulverisor Size 1500X600X850mm Top & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.

WORK TABLE WITH SINK for vegetable washing Size 1950x600x850+150Top & Sink bowl of s.s.sheet, on s.s.anlge & s.s.tubular frame work with cross bracing at lower portion. Sink bowl will be integrally welded with top & grinded smooth. Sink bowl size 450x450x250mm.

CHOPPING BOARD for manual vegetable cutting size:- 1200X600X850mm Frame work made of s.s.anlge top will have P.P./Nylon Board for chopping 700x700x100mm chopping board.

VEGETABLE CUTTING MACHINE Aluminium casted body with ½ hp electric motor safety switch & double feed pusher for round flat & vertical shaped food items etc., the unit will be Table top model with easy to clean provision. Provided with 4 no cutting discs for slicing grating Dicing

CHAPPATI COLLECTION TABLE Size 1500X600X800 Top tray of 16G s.s.sheet, tray will have App.100mm ht. collor all around, mounted on s.s.tubular legs with adjustable feet & one s.s.sheet undershelf.

CHAPPATI ROLLING TABLE Size 2100x650x850mm Top & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required. THREE SIDE CROSS BRACING MADE OF S.S. PIPE 1" DIA FOR UNDERNEATH STORAGE.

CHAPPATI PLATE CUM PUFFER Size 1800x650x850mm Frame work of m.s.anlge, mounted on s.s.tubular legs frame work. All sides pannels & undershelf of s.s.sheet, top plate 10mm thick mild steel with cast iron puffing grills for puffing of chappaties. Complete with 'V' shape LPG burners with individual cont

EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for chapatti plate Size 1950x750x600mm Made of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.

FOOD TROLLEY WITH 4 ROUND PANS, 1 RICE TRAY & STORAGE beneath O/S 1350X750X900mm S.S.Sheet insulated body, Frame work of m.s.anlge of size 38x38x5mm, mounted on 4 castors (2 with brakes) of size 150mm top to have cutout for 4nos. Round pans for Dal, Subzi etc. with 1 rice tray & storage below. Three side covered with s.s.sheet with s.

TRAY CARRIER TROLLEY Size 1200X600X1200mm S.S.Bottom base shelf mount at 150mm with all four sides turned down 50mm in 12mm and secured to welded s.s.anlge frame work & PROVIDED WITH THREE NOS. OF DETACHABLE TRAYS CUM SHELFS UNIT WILL BE MOUNTED ON 4" PILLAR TYPE CASTORS WHEELS (2 NOS. WITH BRAKE & 2 NOS. WITHOUT BRAKE)

TRAY SET UP COUNTER WITH BAIN MARIE & DOUBLE OVERSHELVES Size 1800x600x850+375+225 Top of 16G s.s.sheet, Bain Marie water tank of 18G s.s.sheet, fitted with 3.0kw heating element with automatic temperature controller. Water outlet provision with drain valve, 3 sides covered with 20G s.s.sheet, Top to accommodate s.s.sheet Food Pans with GN pan 1x2x4" depth with lid 5 sets.

STORAGE CABINET Size 1200X600X850mm Top of 16Swg S.S.Sheet one over shelf, three sides of 20SWG s.s. sheet. Dish storage cabinet with 2 shelves and sliding door will be provided on service side.

STORAGE RACK Size 900X450X1800 Vertical of 32 mm dia stainless steel pipe with adjustable feet 4 no of 18 S.S Sheet at equaly distance.

INGREDIENT BINS Size 600X600X600mm Made of S.S. 18 SWG WITH TOP HINGE OPENABLE DOORS SUPPORT WITH FOUR NOS. OF CASTORS, anti crack body, top half hinged lid. Provided with a scoop.

DUNNAGE RACK Size 1200X600X500mm Made of s.s.square pipes of size 32x32mm, with support of 25mm square s.s.pipe.

POT RACK-3 TIER Size 1200X600X1500mm Verticals of 32mmX32mm square s.s.pipe, 3 shelves welded with vertical frame of 19mm dia s.s.pipe shelves with equal space between two tubes mounted on adjustable feet.

SOILED DISH LANDING TABLE WITH GARBAGE CHUTE Size 2400x600x850mm Top of 16G s.s.sheet with 'Sunkun' top. A garbage chute provided on top with a space below to keep dust bin (Not part of equipment). The top will be mounted on m.s.anlge, rust proof painted & s.s.vertical tubular legs with cross bracing support on 3 sides

THREE SINK UNIT Size 1800x600x850+150mm Top & 3 sink bowls of 16G s.s.sheet. Duly welded, grinded & polished smooth mounted on m.s.anlge & s.s.tubular frame work with 150mm back splash. Each Sink Bowl Size 500x500x300mm (without sanitory fittings)

CLEAN DISH TABLE Size 2100x600x850mm Specification same as that of work table but with 2 undershelves.

CLEAN DISH RACK Size 900x450x1800mm Vertical of 32 mm dia stainless steel pipe with adjustable feet 5 no vertical at equal distance 1st shelf fixed at 150mm from floor level.

L.P.G GAS PIPE LINE (150 RUNNING FEET APPROX) ACTUAL MEASUREMENT WILL BE ACCORDING TO As per site conditions

CENTRIFUGAL EXHAUST BLOWER 20000 CFM

S.S GRATING for kitchen drainage trough (APPROX 25 RUNNING FEET) ACTUAL MEASUREMENT WILL BE ACCORDING TO As per site conditions

EXHAUST HOOD DUCTING (APPROX 1200 SQUARE FEET) ACTUAL MEASUREMENT WILL BE ACCORDING TO As per site conditions

MECHANICAL PARKING Providing and installation including fitting fixing all good quality materials required and as directed by the deptt.