Loading
Loading…
Loading…
Tender Value
₹32.2 L
EMD Value
₹64,400
Closing Date
11 Aug 2026, 1:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TECHNICAL
12 conditions · 1 needing a document upload
Clause Regarding GST: (a) All the Bidders/tenderers should ensure that they are GST Compliant and their quoted tax Structure are as per GST LAW.(b) Tenderer Should Furnish their GSTIN numbers representing the States in Which they are registered GST, along with address of Registered Office.(c)The Contract is under GST Act and rules as applicable time to time.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
38 conditions · 8 needing a document upload
Check List: The tenderer(s) would fill up the check list, as per Annexure-XXIII to ensure that they are submitting the complete tender offer.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
AT DMGN:Provision for development of Goods office, labour and merchant room, Drain along with all other basic amenities including water sprinkling system.
LV-T-14-TSK-951
LV-T-14-TSK-951
Open
Works - General
12 Months
Tinsukia, Assam
₹0
₹64,400
11 Aug 2026
20 Jul 2026
28 Jul 2026
73 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 32,18,207 | ||
| — | 80.00 | — | — | ||
| Supply, fitting, fixing, testing & commissioning of wiring materials for concealed type wiring of light point from main/sub-main board to the points by 1.5 mm.sq.single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch 6 A, ceiling rose, GI box with suitable modules for fixing switches. | — | — | — | 52,320 | |
| — | 16.00 | — | — | ||
| Supply, fitting, fixing, testing & commissioning of wiring materials for concealed type wiring of Fan Point/Exhaust fan point from main/sub-main board to the points by 1.5 mm.sq.single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch 6 A,ceiling rose,Modular GI metal box with suitable modules for fixing switches & Regulators and 1.0 sq mm multistrand FRLS copper Cable in green for earth contuinity wire . | — | — | — | 15,120 | |
| — | 30.00 | — | — | ||
| Supply, fitting, fixing, testing & commisioning of wiring materials for concealed type wiring 5 A plug point from main/sub-main board to the points by 1.5 mm. sq. single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch & socket 5 A,GI metal box with Suitable modules for fixing switch/socket with 1.0 mm² unsheathed FRLS copper cable in green colour for earth continuity wire. | — | — | — | 12,840 | |
| — | 15.00 | — | — | ||
| Supply, fitting, fixing, testing & commisioning of wiring materials for concealed type wiring 15 A plug point from main/sub-main board to the points by 4 mm. sq. single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch & socket 15 A , GI metal box with Suitable modules for fixing switch/socket with 1.0 mm² unsheathed FRLS copper cable in green colour for earth continuity wire. | — | — | — | 18,450 | |
| — | 60.00 | — | — | ||
| Supply, fitting , fixing of surface mounted LED Batten 20W, 4 Ft, ultra slim co- extruded polycarbonate channel with integrated electronic driver should be as per IEC: 62384/IS:16104( SMPS based constant current output, THD<20%), IP20 protection, color temperature=6500K, rated input voltage=230V AC, 50 Hz, power factor=0.9, view angle>=120°, lumens output not less than 100 lm/Watt, operating voltage range: 140-270 V AC. LED Should be as per LM-80/IS:16105. Fixture Size:(LXWxH=1156x25x35 mm +/-1) . The fitting should be warranted for 5 Years. Make of LED Batten: Havells/Syska/HPL/Bajaj/Crompton Greaves. | — | — | — | 15,060 | |
| — | 20.00 | — | — | ||
| Supply and fitting , fixing of 18 Watt LED ,Slim, compact, auminum die cast edge lit panel light , recess mounted square fixture with opal diffuser and separate electronic driver. Ceiling Cut Out (210x210 mm). | — | — | — | 26,600 | |
| — | 4.00 | — | — | ||
| Supply, fitting, fixing of exhaust fan 300 mm sweep,230V AC,50Hz metallic louver type | — | — | — | 5,892 | |
| — | 360.00 | — | — | ||
| Supply, drawing and connection of single core 6 sq. mm PVC insulated & unsheathed multistrand FRLSH copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site. | — | — | — | 30,600 | |
| — | 450.00 | — | — | ||
| Supply, drawing and connection of single core 4 sq. mm PVC insulated & unsheathed multistrand FRLSH copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site. | — | — | — | 25,650 | |
| — | 630.00 | — | — | ||
| Supply, drawing and connection of single core 2.5 sq. mm PVC insulated & unsheathed multistrand FRLSH copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site. | — | — | — | 24,570 | |
| — | 3.00 | — | — | ||
| Supply, fitting, fixing, testing & commissioning of wall mounted type 6 way double door SPN MCB DB having IP 43 protection,Shrouded Neutral Bar & Bus Bar, Cement Spill Protector & Door Earthing with the following domestic switchgears:- :- i) 240/415V, 50Hz, 10kA BC "C" series SP 32 Amps. MCB (In accordance with IS/IEC 60898-1) = 2 No. ii) 240V, 50Hz, with 10kA BC "C" series SP 16 Amps. MCB (In accordance with IS/IEC 60898-1) = 2 Nos. (iii) 240V, 50Hz, with 10kA BC "C" series SP 10 Amps. MCB (In accordance with IS/IEC 60898-1) = 2 Nos. | — | — | — | 11,250 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing and commissioning of VTPN Distribution Board System type 4 way double door, IP 43 Protection with MCCB as incomer with the following switchgears and Cement Spill Protector & Door Earthing with the following domestic switchgears:-: (i) MCCB, 4 pole, 100 Amps, 16 KA BC= 1 No (ii) MCB , SP, 63 Amps, 'C' series=4 Nos. (iii) MCB, SP, 32 Amps, 'C' series=3 Nos | — | — | — | 62,000 | |
| — | 10.00 | — | — | ||
| Earthing by 50 mm dia, 3.6 mm thickness 3 Mtrs long GI pipe and 6 SWG GI wire,GI nuts,bolts including masonary materials for earthing pit,salt,charcoal etc. and construction of earth pit covered with CI plate having locking arrangement and watering pipe as per Drawing No PCEE/ELG/DRG/2024/1 Dtd 30.09.2024 | — | — | — | 43,540 | |
| — | 250.00 | — | — | ||
| Supply, laying, connection, testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor cable size 120 mm.sq. 4 core having Galvanized steel Strip, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988. For laying of above cable digging of trench and excavation of earth/concrete to depth 0.75 Mtrs. and breadth 0.5 Mtrs. below the ground level and a layer of sand of 0.075 Mtrs. thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of sand of 0.075 Mtrs. thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. The cable route markers should be provided along the route of cables to indicate their presence so that damage/accident are Not caused by inadvertent digging. (For HM Towers) | — | — | — | 5,30,000 | |
| — | 500.00 | — | — | ||
| Supply, laying, connection, testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor cable size 25 mm.sq. 4 core having Galvanized steel Strip, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988. For laying of above cable digging of trench and excavation of earth/concrete to depth 0.75 Mtrs. and breadth 0.5 Mtrs. below the ground level and a layer of sand of 0.075 Mtrs. thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of sand of 0.075 Mtrs. thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. The cable route markers should be provided along the route of cables to indicate their presence so that damage/accident are Not caused by inadvertent digging. (For HM Towers) | — | — | — | 3,32,000 | |
| — | 200.00 | — | — | ||
| Supply, laying,connection, testing and commissioning of cable size 16 mm.sq. 2 core ,LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured cable having Aluminium Strip, Glavanised Wire Solid Aluminum Conductor, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988. For laying of above cable digging of trench and excavation of earth/concrete to depth 0.75 Mtrs. and breadth 0.5 Mtrs. below the ground level and a layer of sand of 0.075 Mtrs. thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of sand of 0.075 Mtrs. thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. The cable route markers should be provided along the route of cables to indicate their presence so that damage/accident are Not caused by inadvertent digging. | — | — | — | 85,400 | |
| — | 80.00 | — | — | ||
| "Supply fitting , fixing of Supplying and installing of 100 mm width X 50 mm depth X 1.6 mm thickness perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required." | — | — | — | 53,520 | |
| — | 3.00 | — | — | ||
| Supply and installation of Desert cooler 55 Ltrs tank capacity having coverage area of 1200 sq feet and air delivery rate of 12000 meter cube per hour with cooling pads of honeycomb type and fan size 16 inch with motor capacity of 650watt(having copper windings) and speed of 2600rpm with air throw distance of 100 feet with features of inverter compatibility,ice chamber,auto fill and drain,castor wheel,auto louver movement with thermal overhead protection,water level indicator having body of high grade,rust-resistant plastic for durability and lightweight design | — | — | — | 54,270 | |
| — | 12.00 | — | — | ||
| Supply, installation testing and commissioning of Energy Efficient Ceiling Fan 1400 mm sweep BLDC motor, BEE 5 star rated ceiling fan With regulator enable motor with power of 28 watt with 10% tolerance , motor insulation B type 220-240V 50Hz single phase with Speed minimum 350 rpm minimum air delivery 225CMM complete set of 3 no's. blade , down rods, 2 nos canopies , shackle kit & all remaining accessories including nut bolts Washers complete as required . | — | — | — | 36,456 | |
| — | 20.00 | — | — | ||
| Supply, fitting, fixing of LED Street Light 45 W to be fixed on octagonal pole. Specification of 45 W Street light : Housing: Pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management, sturdiness & excellent corrosion resistance. Cable gland is used for maintaining ingress protection, Finish: Epoxy powder coated siemens grey after phosphochromate treatment,Light source :High efficiency long life LED chip in modules with lumen efficacy of 140 lm/W with PC lens to ensure better uniformity of light distribution. Cover: Tempered protective toughened glass, thermal, shock and impact-resistant, fixed to the housing with SS screws. Electronic Driver: Built-in potted electronic LED driver with APFC (SMPS based constant current supply), lower THD, Open Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection & other safety tests as per IS 15885 Part-2/Sec 13. | — | — | — | 94,400 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing and commissioning of Water cooler storage capacity 80 Ltrs, cooling capacity : 60ltrs/hr with RO commercial water purifier. Specification of water cooler: (i) Dimension: Width: 640 mm, Depth: 450 mm Height:1350 mm (ii) Weight without water: 85Kg (iii)Maximum Current(Amps)=5Amps (iv) Cooling capacity Ltrs/Hour=60 (v) Storage capacity= 80 Ltrs (vi) No of Cold water Taps= 1 No(vii) Refrigerant: R-134A (viii) Compressor: Hermatically Sealed with suction gas cooled motor equipped with overload protection.(ix) Condenser Fan: Propeller Type (x) Thermostats: Automatically controls temperature,(xi) Power Supply: 230 V AC+/- 10% , 50 Hz, Single phase, (xii) Water Supply: 3 M to 12 M head(xiii) Power Supply: 5 Amps , 3 pin plug with proper earth connection. Specification of Commercial RO water purifier: 1. Capacity: 50±10 ltrs/hr. 2. Compact Instituiotional RO System with Automatic Flushing. 3. Consist with 2 nos. of booster pump and 4 nos .of RO Membranes. 4. Duty cycle: 500 ltrs/day i.e. 8 10 hrs/day. 5. TDS Rejection: 90±5% 6. Dimensions: W 485 x D 300 x H 840. | — | — | — | 69,990 | |
| — | 3.00 | — | — | ||
| Supply installation of Inverter Split Air Conditioner, 1.5 Ton, BEE 5 Star Rated of wall- mounted split type with inverter compressor technology, suitable for efficient cooling with low power consumption. The AC shall have a rated cooling capacity of 1.5 Ton (approximately 5.0-5.2 kW) and shall operate on 230 V AC, 50 Hz single phase power supply. The unit shall be BEE 5 Star rated as per latest BEE norms, with ISEER value not less than 4.6 (or as per current 5-Star classification), ensuring high energy efficiency. It shall be equipped with a high-efficiency rotary inverter compressor, using eco-friendly refrigerant (R-32 or equivalent), suitable for tropical climatic conditions. The indoor unit shall have a low-noise blower, uniform air distribution, washable air filters, and precise temperature control, while the outdoor unit shall be robust, weather-resistant and supplied with a heavy-duty galvanized steel / powder-coated mounting bracket for fixing the outdoor unit. The scope shall include supply and installation of required low-pressure (suction) and high-pressure (liquid) copper connecting pipes of suitable diameter and thickness, properly insulated, of required length as per site installation conditions, complete with flare nuts and fittings, ensuring leak-proof operation.The AC shall include standard safety and protection features such as overload protection, voltage fluctuation protection, and auto-restart. | — | — | — | 1,17,321 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing and commissioning of silent Diesel Generator set 15 KVA, 3 Phase, 415 V, 50 Hz, 3 cylinder with turbo charging, liquid cooled with minimum 20.6 BHP, at 1500 RPM, residential silencer, fuel tank-32 Ltrs, battery with leads and acoustic enclosure coupled with a brushless, self-excited, synchronous AC alternator with a 4-pole rotating field design, suitable for continuous diesel generator duty rated for 15 kVA, 415 V, 50 Hz, three-phase output at 0.8 power factor, fitted with a solid-state Automatic Voltage Regulator (AVR) providing voltage regulation within ±1 % from no-load to full-load. Insulation Class H .Specification should be as per CPCB IV+ guidelines,IS 13018 :1990 and IS-13364/IS 4722 . Warranty: 24 Months from date of Commissioning. | — | — | — | 4,95,000 | |
| — | 3.00 | — | — | ||
| Concrete 1:1.5:3 (1 cement : 1.5 sand: 3 graded stone aggregate 20mm nominal size) for DG set PAD( 2.5x1.5x0.8 M= 3.0 CUM | — | — | — | 28,038 | |
| — | 200.00 | — | — | ||
| Supply, laying of GI pipe 50 dia having hot-dip galvanized configuration with zinc coating as per IS 4736 to ensure corrosion resistance(Medium Gauge ) | — | — | — | 1,57,000 | |
| — | 200.00 | — | — | ||
| Supplying and laying of following DWC HDPE pipe 63 mm dia (OD-63 mm & ID-51 mm nominal) ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. | — | — | — | 25,400 | |
| — | 4.00 | — | — | ||
| Supply, fitting, fixing of 200 Amps outdoor type cable junction box, angle frame mounted, dust & vermin proof, complete with rain cap, aluminium basbar of suitable size for TPN, 200 Amps, 415 V made out of 16 SWG CRCA sheet duly painted, Cable Junction Box Size: (lxbxh=450x 450x600 mm). The base of the fedder pillar junction box to be provided with CC foundation of propotion 1:1.5:3( cement, sang,Chips) after connection of Ug cables. | — | — | — | 35,756 | |
| — | 120.00 | — | — | ||
| "Providing and executing horizontal boring by HDD machine underneath existing road / railway track at a depth of 2.60 metres below ground level, without causing any damage or disturbance to the existing road surface, pavement, or track structure. The boring shall be carried out to the required length with proper alignment and level control.Providing, lowering, and laying 150 mm diameter CI pipe, inside the bored hole for passing underground power/control cables. The supply of CI pipe is included in the scope of this item. The pipe shall be properly positioned, jointed where required, and secured to prevent displacement. The item includes excavation of entry and exit pits, backfilling with suitable material, compaction, disposal of surplus excavated material, and restoration of all disturbed surfaces to their original condition. The rate shall be inclusive of all labour, HDD boring equipment, machinery, materials, handling, transportation, safety precautions, , and all incidental works, complete in all respects as per site conditions and directions of the Engineer-in-Charge. Work is to be Done at CGF Station" | — | — | — | 4,27,200 | |
| — | 1.00 | — | — | ||
| Supply, fitting, fixing, testing and commissioning of of Indoor Type LT panel board. The panel shall be metal-enclosed, free-standing compartmentalized, modular type suitable for Indoor installation. The panel shall be dust and vermin proof and the enclosure shall provide a degree of protection of not less than IP-52. Control panel shall be fabricated out of 14 SWG cold rolled steel plates & properly supported using angles & channels. The whole panel shall be mounted on a base frame made out of suitable structural, preferably ISMC Channels. Joints of any kind in sheet shall be seam welded, all welding slag grounded off and welding pitwiped smooth with plumber metal. All panels and covers shall be properly fitted and square with the frames and holes in the panel correctly positioned. The Panel shall be fully compartmentalised with front and back opening doors.. When compartment door is opened, busbar and cable alley shall be shrouded by barrier plates. All panels shall be provided with suitable cable alley and vertical bus bar alley.Each cable chamber shall have cable entry from bottom and suitable removable gland plates shall be provided for this purpose. The cable chamber shall be provided with suitable supporting arrangement between the gland plate and terminals, in the middle. The cable chamber shall have a minimum width of 300 mm depending upon the outgoing cables. Each chamber shall be provided with a hinged type door opening away from the cable alley and shall be provided with black flowertype thumb screw which shall ensure tight closing. The edges of the door shall be provided with a neoprene rubber gasket to make the compartment dust proof.. The panel shall consists of the following Switchgears: ( BUS BAR=250 Amps TPN Aluminium) (i)MCCB 4 pole 250 Amps, 25KA BC Ics=100%Icu , Thermal Magnetic OL & SC Protection=1 NO (ii) MCCB 4 pole 125 Amps 25KA BC Ics=100%Icu , Thermal Magnetic OL & SC Protection-4 Nos (iii) MCB TPN 63 Amps C series-1 No. (iv)LED three phase indication lamp RYB for incoming mains. -1 Sets (v) Digital Voltmeter LED indication with inbuilt selector switch (0-500 V) -1 Sets (vi) Digital Ammeter LED indication with inbuilt selector switch (40-400 Amps) -1 Sets | — | — | — | 84,650 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing and commissioning of energy efficient 7.5KW/10 HP multistage submersible pumping set, discharge capacity: ( 240-1080) LPM for a head of (63-16) Mtrs , outlet pipe size: 80 mm,The Pump should carry a warranty of 12 Months from the date of commissioning. | — | — | — | 61,298 | |
| — | 1.00 | — | — | ||
| Supply of energy efficient 7.5KW/10 HP multistage submersible pumping set, discharge capacity: ( 240-1080) LPM for a head of (63-16) Mtrs , outlet pipe size: 80 mm,The | — | — | — | 61,298 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing & commissioning of Automatic Star Delta Starter in sheet steel enclosure For 7.5HP/10 KW pump with Robust 4 pole contactor, Overload relay with built in single phase preventor, Relay Amps 8.9-13.5 Amps with Electronic Star delta timer suitable for 415 V. 50Hz. AC supply made out of 16 SWG CRCA sheet. The panel shall be totally enclosed, dust & vermin proof, neoprene gasket of thickness not less than 2 mm shall be used between all adjacent units & beneath all covers so that the joints are effectively dust vermin proof. The panel shall have uniform height & depth and pdg. with insulated & spring loaded thumb screws. The busbar chamber shall have 3 phase & neutral Cu. busbar. The panel shall be complete with PVC insulated Cu. wire & shall be ready for connection to the equipments. | — | — | — | 16,069 | |
| — | 1.00 | — | — | ||
| Supply of Automatic Star Delta Starter in sheet steel enclosure For 7.5HP/10 KW pump with Robust 4 pole contactor, Overload relay with built in single phase preventor, Relay Amps 8.9-13.5 Amps with Electronic Star delta timer suitable for 415 V. 50Hz. AC supply made out of 16 SWG CRCA sheet. The panel shall be totally enclosed, dust & vermin proof, neoprene gasket of thickness not less than 2 mm shall be used between all adjacent units & beneath all covers so that the joints are effectively dust vermin proof. The panel shall have uniform height & depth and pdg. with insulated & spring loaded thumb screws. The busbar chamber shall have 3 phase & neutral Cu. busbar. The panel shall be complete with PVC insulated Cu. wire & shall be ready for connection to the equipments. | — | — | — | 16,069 | |
| — | 30.00 | — | — | ||
| Supply, laying of GI pipe 80 mm dia having hot-dip galvanized configuration with zinc coating as per IS 4736 to ensure corrosion resistance(Heavy Gauge with necessary GI flange | — | — | — | 38,730 | |
| — | 150.00 | — | — | ||
| Supply,laying,fixing and connection of Flat 6.0 SQ mmThree Core PVC Insulated & PVC Sheathed Industrial copper Cable for Submersible Pump Motors 1100 Volt, conforming to IS 694. | — | — | — | 50,850 | |
| — | 1.00 | — | — | ||
| Supply, fitting, fixing of Cast Iron body (confronting to IS 210) Non return valve 80 mm dia having Nitrile Rubber ''O'' RINGS for leak tightness and stainless steel flap pins to resist corrosion. | — | — | — | 3,600 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCACS11_compressed.pdf
ATTACHMENT
AnexxuresSectionVIINew.pdf
ATTACHMENT
TenderDocuments951.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .