Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹24.8 LAccepted-AOC | 1 | Accepted-AOC L1 Bidder | |
| 2 | 2₹32.3 L+₹4.7 L (16.9%)Rejected-Finance | 2 | Rejected-Finance Not L1 Bidder |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
13 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH KOLKATA
GE NORTH KOLKATA 46 BT ROAD KOLKATA 50
MAINT TO WATER SUPPLY LINES PUMPS STARTERS CABLE ETC AT MIL STATION KANKINARA UNDER GE NORTH KOLKATA
2022_MES_545393_1
8189/22-23/E8/GE(N)/KOL/ OF 2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
KANKINARA
AS PER NIT
8 documents required · 8 mandatory
₹500
GE NORTH KOLKATA
₹50,000
Yes
12 Oct 2022
13 Aug 2022
14 Sept 2022
14 Aug 2022
13 Sept 2022
27 Aug 2022
Amount
Excavation in trenches not exceeding 1.5 m width or n exc 10 sqm on plan and n.exe 1.5 m in depth for taking out/laying of cable,foundation etc and getting out in soft/loose soil complete all as specified and as directed.
All as per item No.01 above but for PCC or hard /dense soil.complete all as specified.and as directed .
Returning and filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft / loose soil complete all as specified and as directed.
Removing surplus soil to a distance not exceeding 50 mtrs and depositing where directed including spreading, leveling at a level not exceeding 1.5 mtr from the starting point complete all as specified and as directed
Removing surplusHard rock/PCC obtain from hard standing to a distance not exceeding 50 mtrs and depositing where directed including spreading, leveling at a level not exceeding 1.5 mtr from the starting point complete all as specified and as directed
Taking up CI pipe from trench with all fittings, including burning out lead joints and recovering lead complete, segregating unserviceable and serviceable pipes, keeping aside serviceable pipe for reuse complete all as specified & directed for 200 mm bore / dia pipe. Note: Excavation shall be measured and paid separately.
All as per item No. 6 above, but 150 mm bore / dia..
All as per item No. 6 above,100 mm bore.
All as per item No. 6 above,80 mm bore.
Supply and fixing on pillars/walls / trenches DI pipes with spigot and socket ends,K9, 200 mm bore / dia,confirming to IS8329-/2000 centrifugally cast, suitable for tyton rubber joint in any length, laid in trenches including testing complete all as specified & directed. Note:Joints and fittings shall be measured and paid separately under the appropriate item)
All as per item No. 10 above,150 mm bore / dia.
All as per item No. 10above,100 mm bore / dia.
All as per item No. 10 above,80 mm bore / dia.
Rifixing of Servicieble CI/DI pipes 200 mm bore.obtain from srl item no 10 to 13 complete all as specified & directed. Note: joints and fitting shal be measured and paid separately under the appropriate item)
All as per item No. 10 above,150 mm bore / dia.
All as per item No. 10 above,100 mm bore / dia.
All as per item No.10 above,80 mm bore / dia.
Dismantling and taking down the clogged/unserviceable GI pipe, 50mm bore / dia, from trenches/floor/wall, etc complete. Note: Excavation, refilling & removing surplus soil shall be measured and paid separately.
All as per item No. 18 above, 40mm bore / dia.
All as per item No. 18 above, 25mm bore / dia.
All as per item No. 18 above, 20mm bore / dia.
All as per item No. 18 above,15mm bore / dia.
Supply & fixing GI tubing pipe of medium grade, 50mm bore / dia, in trenches/wall/floor ,complete all as specified & directed
All as per item No. 23 above, 40mm bore / dia.
All as per item No. 23 above, 25mm bore / dia.
All as per item No. 23 above, 20mm bore / dia.
All as per item No. 23 above,15mm bore / dia.
Re fixing old steel tubing, 50mm bore with new fittings, and making connections after cleaning, in new or old position on walls / celings / floors / trenches etc of size all as directed byEngr-in-Charge.
All as per item No. 28 above, 40mm bore / dia.
All as per item No. 28 above, 25mm bore / dia.
All as per item No.28 above, 20mm bore / dia.
All as per item No. 28 above,15mm bore / dia.
Material and labour for rubber tyton joints for DI pipes 80 mm bore pipes all as directed by Engr-in-charge
All as per item No 33 here-in-above but for DI pipes 100 mm bore pipes all as directed by Engr-in-charge
All as per item No 33 here-in-above but for DI pipes 150 mm bore pipes all as directed by Engr-in-charge
All as per item No 33 here-in-above but for DI pipes 200 mm bore pipes all as directed by Engr-in-charge
Cutting cast Iron pipes for the following bore, in position for insertion of new DI fittings for further modification all as directed for the 80 mm bore / dia. Note - CI fitting will be measured and paid seperately.
All as per item No 37 here -in-above but for 100 mm bore / dia.
All as per item No 37 here -in-above but for 150 mm bore / dia.
All as per item No 37 here -in-above but for 200 mm bore / dia.
Supply and fix DI special such as bend, tee, tapper, Y junction, collar, tail pieces or any other fittings with spigot socket end / flanged spigot ends or flanged socket ends up to 200 mm bore complete all as specified & directed.
Supply and fix cast iron Non Return Valve valve flanged both ends including all necessary fixing and jointing arrangement such as MS nuts, bolts, washers & gasket, etc and testing including taking down old unserviceable Non Return Valve complete all as specified and as directed for 100 mm sizes. Make: KALPANA /KIRLOSKAR / LEADER/RMCO/ZOLOTO
Supply and fixing of MS ERW Pipe 250 mm pipe with drilled double flange ends having two cable slots on each flange complete, including MS bolts, nuts, washers & rubber insertion gaskets for construction of water distribution complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement to high pressure single head gear motored adjustable dosing pump self priming with all accessories including lead tubing connecting nuts injuction check valve clay weight and ferrules adjustable high pressure 0 to 100 PSI 230 volt 50 Hz, RPM 44,1/30 HP (Fractional), out put 2US GPD to 40 US GPD liquid end of dosing pump including nonmetalic accessories complete all as specified (Model 96NGO51 of M/S Declibac Technologies/miltan Roy/RMCO)
Development of tube well by means of 265 cfm air compressor for a peroid of 72 hrs until sand free clear portable water is obtained by busing diesel engine driven turbine pump is getting max yield and discharged measured by orifice V notch including submitting of strata chart , yield test result and water test of chemical and bacteriological report obtained form National Test House all as per IS 11189 & IS 10500 complete all as specified and directed.
Supply and lowering vertically and fixing in position PVC Casing Pipe of wall thickness 7mm, 250 mm bore of suitable lengths with bevelled ends suitable for and including welded butt joints with electric arc welding, conforming to IS : 3589 / 1991 all as specfied and as directed.
Supply and lowering vertically and fixing in position PVC casing pipe of wall thickness 7mm, 150 mm bore of suitable lengths with bevelled ends suitable for and including welded butt joints with electric arc welding, conforming to IS : 3589 / 1991 all as specfied and as directed.
Supply and lowering vertically and fixing in position PVC stainer/slotted Pipe of wall thickness 7mm, 150 mm bore of suitable lengths with bevelled ends suitable for and including welded butt joints with electric arc welding, conforming to IS : 3589 / 1991 all as specfied and as directed.
Material and labour for washed pea-gravel (sub-rounded to rounded) of grading 2 mm to 6 mm for packing / shrouding around the Tube-Well Structure.
Lifting of submersible pump & motor of capacity 12 to 20 HP after disconnecting it from column pipes, submersible cable, decoupling motor & pump and disconnecting from the delivery line & transportation submersible pump & motor to workshop and back for necessary repair & replacement of unserviceable parts, including. bolts, nuts, washers, gaskets etc, duly cleaning and painting with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer & reassembling the same including testing, lowering & commissioning submersible pump & motor complete all as specified and directed.
Supply, making joint in replacement, test and connect PVC insulated and PVC sheathed flat submersible cable of multistranded copper conductors of size 6 sq mm, 3-core, 1100 volt grade. Make : Finolex / Plaza/Harsh.
Material & labour for construction of brick masonry valve pit chamber including necessary excavation and earth work and demolition of old damaged valve pit chamber complete with frame and MS cover alongwith locking arrangements (3mm thick with staffen and two handles), making of PCC work (1:2:4 ) type C1 foundation for size (1200x1200x900 mm) internal dimension as directed by engineer-in-charge.
Material & labour for construction of brick masonry valve pit chamber including necessary excavation and earth work and demolition of old damaged valve pit chamber complete with frame and MS cover alongwith locking arrangements (3mm thick with staffen and two handles), making of PCC work (1:2:4 ) type C1 foundation for size (900x900x900 mm) internal dimension as directed by engineer-in-charge.
Supply only ERW Steel Column Pipe, medium grade, 4.50 mm (7 SWG) wall thickness, 100 mm bore with drilled double flange ends having two cable slots on each flange complete, including MS bolts, nuts, washers & rubber insertion gaskets. Make : TATA / BANSAL / GAJANAN. Note: Fixing charges rate is included in item no.1
Chemical and Bacteriogical analysis of water as per IS-10500 ,sample collected from borewell/user point for pump house at MU camp, Chord line and ESD Area all as directed by Engr-in-Charge. Note:- Testing shall be carried out in any Govt lab Having NABL accredidation / University / Govt Engineering college. the certificate shall be submitted duly deface by the Engineer-In-Charge, in token of satisfactory test results.
Suply and fixing of Run lead joint for SPIGOT AND SOCKET PIPES AND FITTINGS of size 200mm bore
Suply and fixing of Run lead joint for SPIGOT AND SOCKET PIPES AND FITTINGS of size 150 mm bore
Suply and fixing of Run lead joint for SPIGOT AND SOCKET PIPES AND FITTINGS of size 100mm bore
Suply and fixing of Run lead joint for SPIGOT AND SOCKET PIPES AND FITTINGS of size 80mm bore
Repairs and servicing of high pressor single head gear motor adjustable dosing pumpelectrically controlled 230 volt, 50 Hz, single phase, continuous rotor type,including striping out the burnt winding and rewinding with super enameled copper winding wire of the same gauge varnishing and drying, re-erecting, testing and commissioning, including replacement of DE and NDE bearings / bush shaft seal, any other minor parts required for proper functioning, painting the set with two coat of synthetic enamel paint after preparing the surface all as specified and directed by Engineer-in-Charge.
Supply and fixing of Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15 mm bore dia of pipe
Supply and fixing of Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 20 mm bore dia of pipe
S&F gun metal, gate valves 50 mm bore/ dia, with iron wheel head, screwed both ends for iron pipes including taking out of existing unserviceable gate valve complete all as specified and directed by Engr-in-charge.
All as per item No. 63 above, 40mm bore / dia.
All as per item No. 63 above, 25mm bore / dia.
All as per item No. 63 above, 20mm bore / dia.
All as per item No. 63 above,15mm bore / dia.
M & L for preparation of old decorated surfaces of steel and iron, painting with synthetic enamel paint,first quality,etc complete.
M&L for general overhauling of submersible pump of capacity 10 HP to 25 HP by opening/de-asembling the pump including derusting, descaling, servicing, oiling/greasing & including replacement of worn out parts if required (which shall be measured and paid separetely as supply only) washer (GI), nuts, bolts and other minor parts not specifically mentioned shall also be replaced where required for proper functioning of pump set complete all as specified and directed by Engr-in-Charge.
Supply only suitable pump shaft (stainless steel ) for submersible pumping set of capacity 12 to 25 HP complete all as directed :-
All as per item No. 70 above but Pump drive-end gun metal bush.
All as per item No. 70 above but Seal Ring gun metal.
All as per item No. 70 above but Cast Iron Bowl Assy.
All as per item No. 70 above but Pump shaft key (s/s).
All as per item No. 70 above but Sand - guard for motor.
All as per item No. 70 above but Thrust Plate for Motor.
All as per item No. 70 above but Bush stainless Steel for coupling of motor & pump
All as per item No. 70 above but pump Impeller bronze
Material and labour for Rewinding of submersible motor capacity 20 to 25 HP AC 3 phase, 415 volts with super enamelled copper wire conforming to existing gauge size and turn including paper seperator, cleaning of slots, replacement of insulating materials etc and varnishing with approved varnish and testing on complete all as specified directed
All as per item No. 79 above but 12 to 17.5 HP.complete all as specified and as directed.
S&F in replacement thrust bearing housing of the suitable size for motor of capacity 10 HP to 25 HP complete all as specified
All as per item No 81 above but thrust plate
All as per item No 81 above S/S Sleeve
All as per item No 81 above Upper bearing body
All as per item No 81 above Lower bearing body
All as per item No 81 above Oil seal
All as per item No 81 above GM Bush for submersible motor pump
All as per item No 81 above Thrust segmant bearing
S&F in replacement of stator set of submersible motor for 12.5 HP duly winded with PVC insulated superior quality copper wire and including taking down existing unserviceable stator set complete all as specified. Make - KSB/SU.
S&F in replacement of rotor for submersible pump suitable for 12.5 HP including taking down of existing unserviceable rotor complete all as specified. Make - KSB/SU.
Supply and fix connecting testing and commissioning fully automatic star delta starter AC 3 Phase 415 Volts 50 Hz, encloused in steel sheet enclouser suitable for 12.5 HP to 15 HP motor having range 11 to 18 Amps relay range including taking down old unserviceable starter complete all as specified directed.(Model - C & S cat Pt No - CS1SDN1118 / ABB /siemens)
Supply and fix connecting testing and commissioning fully automatic star delta starter AC 3 Phase 415 Volts 50 Hz, encloused in steel sheet enclouser suitable for 30 HP motor having range 13 to 18 Amps relay range including taking down old unserviceable starter complete all as specified directed.(Model - C & S cat Pt No - BE1-SPSSDX404N355-A4 / ABB /siemens)
Supply and fix connecting testing and commissioning fully automatic star delta starter AC 3 Phase 415 Volts 50 Hz, encloused in steel sheet enclouser suitable for 30HP to 35 HP motor having range 18 to 32 Amps relay range including taking down old unserviceable starter complete all as specified directed.(Model - C & S cat Pt No - BE3-DXM254N353/ ABB /siemens)
Taking out wet type sewage pumping set of capacity of 4 HP/5 HP (vertical turbine pump) from sewage sump alongwith ERW column pipe and transporting to work shop for repair, dismantling the wet type sewage pump (vertical turbine pump) of any make and assessing to the extent of repair, Cleaning,overhauling, greasing etc, replacement of spares and reassemble including minor parts like nuts, bolts washers etc duly painted with black bituminous paint on column pipe and one coats of synthetic enamel paint, including preparation of surfaces and transporting from workshop to site after complete repair, reinstallation of the pump, testing and commissioning all as directed. Note:- (i) The spares shall be paid separately, under appropriate items as supply only. The labour component involved in replacing spares is deemed to included in the quoted rate. (ii) Rewinding of motor, if so required, shall be measured & paid separately.
Supply only Bush for motor for sewage pumping set of 4 HP/5 HP pump set
Supply only bearing for pump for sewage pumping set of 4 HP/5 HP pump set
Supply only pump shaft stainless steel for sewage pumping set of 4 HP/ 5 HP pump set
Supply only Shaft sleeve stainless steel for sewage pumping set of 4 HP/5 HP pump set
Supply only pump impeller bronze for sewage pumping set of 4 HP/5 HP pump set
Material and labour for re-winding of vertical type electrical motor of sewage pump set 4 HP/5 HP, 3 Phase 415 volts with super enameled copper winding wire conforming to existing gauge /size and turn including paper separator cleaning of sloats ,replacement of insulating and varnishing with approved varnish and testing on completion complete all as specified directed.
Supply and fixing direct on line (DOL) submersible starter, AC 3 Phase, 415 volts for 5HP with relay 9 TO 14 Amps suitable up to 12.5 HP motor, after taking down the old one complete all as specified and directed. Make : C & S cat no. CS1SDN0914 /L&T/SIEMENS/ABB as approved by the GE.
Dismantling and taking down the clogged/unserviceable Sluice valve of size 200/150/100/80 mm and refixing the same after minor repair and changing of gasket of suitable size and any other item required will be included in quoted rate item required (which shall be measured and paid separetely as supply only) complete all as specified and directed by Engr-in-charge.
Suppy only cap spare parts of sluice valves of 200 mm dia bore
All as per item No 103 above but SS stem/ Spindle /GM nut including seat
All as per item No 103 above but Nut bolts, washers for flange
All as per item No 103 above but Flange Rubber Gasket
All as per item No 103 above but Hand wheel
All as per item No 103 above but MS flange single 16/20 mm
Suppy only cap spare parts of sluice valves of 150mm dia bore
All as per item No 109 above but SS stem/ Spindle /GM nut including seat
All as per item No 109 above but Nut bolts, washers for flange
All as per item No 109 above but Flange Rubber Gasket
All as per item No 109 above but Hand wheel
All as per item No 109 above but MS flange single 16/20 mm
Suppy only cap spare parts of sluice valves of 100/80 mm dia bore
All as per item No 115 above but SS stem/ Spindle /GM nut including seat
All as per item No 115 above but Nut bolts, washers for flange
All as per item No 115 above but Flange Rubber Gasket
All as per item No 115 above but Hand wheel
All as per item No 115 above but MS flange single 16/20 mm
Supply, fixing, jointing and testing 150mm dia of cast iron sluice valve class I (ISI MARKED) PN-1 type latest IS 14846-2000 flanged ends, drilled having gun metal spindle with cast iron wheel head at top complete with nuts, bolts, washer and rubber gasket etc complete including taking down unserviceable sluice valve complete all as specified and directed. Make :- Leader/ Kirloskar/ RMCO.
Supply, fixing, jointing and testing 100mm dia of cast iron sluice valve class I (ISI MARKED) PN-1 type latest IS 14846-2000 flanged ends, drilled having gun metal spindle with cast iron wheel head at top complete with nuts, bolts, washer and rubber gasket etc complete including taking down unserviceable sluice valve complete all as specified and directed. Make :- Leader/ Kirloskar/ RMCO.
Supply, fixing, jointing and testing 80mm dia of cast iron sluice valve class I (ISI MARKED) PN-1 type latest IS 14846-2000 flanged ends, drilled having gun metal spindle with cast iron wheel head at top complete with nuts, bolts, washer and rubber gasket etc complete including taking down unserviceable sluice valve complete all as specified and directed. Make :- Leader/ Kirloskar/ RMCO.
Cleaning of capacity up to 1,00,000 Gallons RCC overhead reservoi at 15 mtr staging all as specified here-in-below and as directed by Engr-in-Charge. (a) Cleaning of OHT with evacuate water from the tank with suction pumps with high speed jet of water clean all the surfaces of inside of tank so as to dislodge the layers of dirt on the surfaces of tank, take out the dislodged dirt with a SLUDGE PUMP which leaves the tank completely dirt free and Removing mould, moss foreign materials scale end dirt etc, from the internal surfaces of the tank and from the mouth of pipe by scraping with steel filter brushes or steel scrappers disposal of water materials to a distance N exc 50m (b) Sterilize the tank with in ANTI - BACTERIAL agent, which should be biodegradabale, ECO-FRIENLY in nature and totally safe for drinking water finally, expose the surface of tank to special ULTRA-VIOLET RAYS for some time which terminate the FLOATING WAVELENGTHS if anySpreading a thin layer of bleaching powder in internal surface of resercioire and then cleaning with fresh water.
All as per items No 102 aboe but 30,000 gallons capacity RCC overhead reservoir complete all as specified and as directed by Engr-in-Charge.
All as per items No 102 aboe but 20,000 gallons capacity RCC overhead reservoir complete all as specified and as directed by Engr-in-Charge.
Supply and fixing PVC bail plug 150 mm dia with 7 mm wall thickness to be fitted with PVC pipe 150 mm dia including all fixing material complete all as specified and directed by Engr-in-charge.
Supply and fixing PVC reducer 250 mm / 150 mm of wall thickness 7mm, of suitable length to be fitted with PVC pipe 250/150 mm dia including all fixing material complete all as specified and directed by Engr-in-charge.
Supply& fix, in repair, of single phase preventor relay 380 V AC 6 wires complete all as specified and directed by engineer -in-charge. Make :L&T cat part No-CS94824LOOO./C & S
M/s Anil Kumar Dutta
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .