REPAIR/MAINT OF INTERNAL ELECTRIFICATION LED LIGHT FITTINGS LAMPS GEYSERS AT CGRA AREA TRV CHICOLNA and 39.37 ACRES UNDER GE (I) (CG) GOA

Amount

Taking down aluminium/copper point wiring (light, fan, socket or power) complete including fitting and fixtures such as switches, ceiling roses, pendant, regulators, sockets, light fitting etc and making good the disturbed surface complete all as specified and directed.

M&L Point wiring complete with 110 volt grade PVC insulated unsheathed multistranded 1.5 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid non-metalic PVC casing caping medium grade of size 25 mm, etc fixed on wall/ceiling including provision of 1.5 sqmm PVC unsheathed copper conductor and connected to earth dolly, including provision of modular metal fush box module include modular white cover plate with frame top cover for housing switches sockets etc concealed on wall complete all as specified and directed for the following:-

One light point controlled by one switch

One call bell point controlled by bell push

One fan/exhaust fan point controlled by one switch & regulator

One 3 pin socket outlet 5 Amps point independent

One 3 pin socket outlet 5 amps on the same board

One light point controlled by two, two way switches.

All as per item No 2.00 above but with 2.5 sqmm copper cable through casing and caping of suitable size and one run of 2.5 sqmm copper cable of upto earth dolly earthing for 15 Amps socket outlet independent complete all as specified and directed.

M&L submain wiring with 1100 volt grade PVC insulated unsheathed multistranded two run of 4 Sqmm copper conductor cable conforming to IS 694 FRLS drawn through and including rigid white/ivory colour PVC casing caping /conduit etc. Fixed on wall ceiling including provision of one run of 4 Sqmm PVC unsheathed copper conductor and connected to earth dolly including taking down of old unservicible one complete all as specified and directed. (Note - 02 run of 4 Sqmm main wire, 01 run of 4 Sqmm as earth conductor and 01 run of PVC casing caping/counduit will be measured as one length.)

M&L for submain wiring with 1100 volt grade PVC insulated unsheathed multistranded two run of 6 Sqmm copper conductor cable conforming to IS 694 FRLS drawn through and including rigid white/ivory colour PVC casing caping /conduit etc. Fixed on wall ceiling including provision of one run of 6 Sqmm PVC unsheathed copper conductor and connected to earth dolly including taking down of old unservicible one complete all as specified and directed. Note - 02 run of 6 Sqmm main wire, 01 run of 6 Sqmm as earth conductor and 01 run of PVC casing caping/counduit will be measured as one length.

S & F in repairs factory made sheet metal enclosure MCB DB, metal door (double door), per phase isolation, vertical type, IP 43 protection, class SPN 240 Volts, 8 way complete with 200 Amps rated copper bus bar and neutral link complete all as specified and directed.

S & F in repairs factory made sheet metal enclosure MCB DB, metal door (double door), per phase isolation, horizontal type, IP 43 protection, class TPN 415 Volts, 4 way complete with 200 Amps rated copper bus bar and neutral link complete all as specified and directed.

S&F in repairs MCB SPN 06 to 32 Amp, 230 volts, 'C' Series complete all as specified and directed.

S&F in repairs MCB SP 'C' series 06 to 32 Amp, 230 volts, complete all as specified and directed.

S&F in repairs MCB TPN 'C' series 63 Amp, 415 volts, 50 Hz, 10 KA complete all as specified and directed.

S&F in repairs RCCB 32 Amps, double pole 30mA, 240/415 volts, 50Hz, Breaking Capacity 10 KA complete all as specified and directed.

S&F in repairs RCCB 25 Amps, double pole 30mA, 240/415 volts, 50Hz, Breaking Capacity 10 KA complete all as specified and directed.

S & F switch piano single pole flush type 5 amps, 230 volts including removal old existing unsv one complete all as specified and directed.

S & F switch piano single pole flush type,two way, 5 amps, 230 volts including removal old existing unsv one complete all as specified and directed.

S & F socket flush type multipurpose 2/3 pin 15 amps 2 in 1, 230 Volts all as specified including removal old existing unsv one complete all as specified and directed.

S & F switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts all as specified including removal old existing unsv one complete all as specified and directed.

S & F switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type including removal old existing unsv one complete all as specified and directed.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks including removal old existing unsv one complete all as specified and directed.

S & F bell push one way single pole including removal old existing unsv one complete all as specified and directed.

S & F Modular switch 1 way 6A, 1 module including removal old existing unsv one complete all as specified and directed.

S & F Modular switch 2 way 6A, 1 module including removal old existing unsv one complete all as specified and directed.

S & F Modular switch 1 way 15A, 1 module including removal old existing unsv one complete all as specified and directed.

S & F Modular Bell push 6A 1 module including removal old existing unsv one complete all as specified and directed.

S & F Ding dong Bell type, 230 volts, single pole including removal old existing unsv one complete all as specified and directed.

S&F Modular socket, 6A -2/3 pin combined 2 module, including removal old existing unsv one complete all as specified and directed.

S & F Modular socket, 6A/16A-2/3pin combined 2 module, including removal old existing unsv one complete all as specified and directed.

S & F in repairs 8 module modular white cover plate with frame complete all as specified and directed.

S & F in repairs 6 module modular white cover plate with frame complete all as specified and directed.

S & F in repairs 4 module modular white cover plate with frame complete all as specified and directed.

S & F in repairs 3 module modular white cover plate with frame complete all as specified and directed.

S & F in repairs 1 module modular white cover plate with frame complete all as specified and directed.

M&L in repairs PVC rectangular block for mounting, switches, sockets, fan regulator etc, with 3mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed.

S & F in repair single phase 230 volts (10-60 Amp)temper proof electronic energy meter with LCD display of KWH reading confoirming to IS 13779/IEC accuracy class 1.0 in built over load capacity up to 100% of rated load making electrical connection complete in all respect all as specified and directed including writing MES number. Make - L&T cat part No WM101BC7DL0 or similar make as mentioned in "Particular Specification". (Note: Old removed electronic energy meter shall be deposited in MES store.)

S & F in repair three phase 240 volts (10-60 Amp) temper proof electronic energy meter with LCD display of KWH reading confoirming to IS 13779/IEC accuracy class 1.0 in built over load capacity up to 100% of rated load making electrical connection complete in all respect all as specified and directed including writing MES number. Make - L&T cat part No WR300BC7300 or similar make as mentioned in "Particular Specification". Note: Old removed electronic energy meter shall be deposited in MES store.

S&F in repairs 1x 18W LED tube rod , cool white with 1200mm length complete all as specified and directed.

S & F in repairs LED tube light fitting 1 x 18 W, 230V wall mounted integrated batten, 4 ft LED module fixed on wall/surface/ceiling shall confirm to IS 16103 and shall bear BIS certification marking complete with all accessories internally pre- wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and directed.

S& F in repairs LED tube light fitting 1 x 9 W, 230V wall mounted integrated batten 2 ft LED module fixed on wall / surface / ceiling shall confirm to IS 16103 and shall BIS certification marking complete will all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and directed.

S& F in repairs LED lamp 9W, 230V, insulated body, with back plate for batten fitting complete all as specified and directed.

S&F in repair LED light fitting, 1x7 watts, 230 volt decorative wall mounting type with multicolour ABS housing with poly carbonate rings, and glass shade with lamp holders, connector block, etc.complete with all accessories prewired and including provision of three core flexible copper wire of size 23/0.0076 and connecting up from ceiling rose to light fitting complete in all respect all as speceified and directed.

S&F for compact & decorative energy efficient luminaire with anti glare diffuser & decorative end caps suitable for 11 w LED lamp fitting with 11 W LED light ,single phase 240V, including 1.5sqmm copper flexible cable twisted three core alongwith flelxible PVC conduit from ceiling rose to fitting testing complete all as specified and directed.

S & F in repairs 1 x 36 watts LED building security light made up of pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP66 protection for building security lights all as specified.

S & F in repairs 25W LED post top spherical shape integral pole decorative type with necessary length of GI pipe fitted with housing and IP65 protection complete all as specified and directed. Make: Bajaj cat part No BLPTSP 25W NW LED similar make as mentioned in "Particular Specification".

S & F in repairs 40W LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffuser and IP65 protction complete all as specified and directed. Make - Bajaj cat part No BGCL 40W LED WH or similar make as mentioned in "Particular Specification".

S & F in repairs decorative wall light fixture made up of polycarbonate, suitable for 15W retrofit (Spiral B-22 Base) complete all as specified and directed. Make - Havells Cat part No LHDL06160099 or similar make as mentioned in "Particular Specification".

S & F in repairs LED 36W recess mounting 2' x 2' luminaire white powder coated CRCA housing with LEDs, seamless front frame with flat white high transmission acrylic cover complete all as specified and directed. Make - Bajaj cart part No BZRSQL 36W GIII NW or similar make as mentioned in "Particular Specification".

S & F in repairs 2 x 28W recess mounted T5 mirror optics luminaires white powder coated CRCA sheet housing with specular reflector complete all as specified and directed. Make - Bajaj cart part No BTDL 228 or equivalent in Lukar / Crompton Greaves / Philips.

S & F in repairs 2 x 36W surface / recess mounting FTL luminaires , white powder coated CRCA sheet steel housing with aluminium mirror reflector complete all as specified and directed. Make - Bajaj cart part No BJCM 236 or similar make as mentioned in "Particular Specification".

S&F in repairs RJ Telephone Socket with PVC Box complete all as speceified and directed

S&F in repairs factory made sheet metal enclosures single pole and neutral with two pin and earth plug socket complete with one double pole MCB 20 Amps complete all as speceified and directed.

Supply, install, testing and commissioning of factory made LT meter panel wall mounted board CPRI approved made out of CRCA sheet of 2 mm thick indoor type double door compartmentalised construction totally enclosed weather, dust and vermin proof with front opening hinged door locking arrangement 415 volt 3 phase 4 wires AC 50 Hz having aluminium busbar for phases and the neutral insulated with PVC sleeves, suitable chamber for fixing single phase electric meter -05 Nos complete, and epoxy powder 2 coat of spray paint over a coat of red oxide primer including taking down of old unservicible one complete all as specified and directed.

INCOMING (a) Including MCCB 415 volts 4 pole 25 KA breaking capcity fixed magnetic setting type of 100 Amps - 01 No (b) R -Y-B phase LED incating lamps - 03 Nos (c) 200 Amp TPN main aluminium busbar OUTGOING (a) Including MCB SP&N 32 Amps breaking capacity 10 KA 'C' Curve - 05 Nos (b) Space for mounting single phase energy meter - 05 Nos (c) Copper flexible wires of 6 Sqmm size for all feeders. (d) Removinig and refixing of electric energy meter -05 Nos

Taking down storage type water heater (Geyser) 25 Ltrs capacity of any make/model/type from existing wall after disconnecting of electric and water supply connections and keeping the same in safe custody for servicing and carry out repairs/replacement of unserviceable spare parts & components such as heating element, thermostat,pilot lamps with wiring,insulating glass wool, thermal cut out,pressure release valve,safety valve,aperature plate assembly etc and exmine water tightness of inner storage tank after cleaning and renewal of rubber washer/gasket and nut,bolts and washers etc and adjust to required range of thermostat control and assembling all parts/ accessories including fixing back in same location after connecting up of water & electric connections and testing for its satisfatory functioning complete all as specified and directed. Note:- (i) Spares will be measured and paid separately under relevant item of schedule as supply only (ii) Labour element for fixing of spare parts and removing old unserviceable items are deemed to be included in quoted rate.

All as per item No.51 above, but of capacity 50 litre

Supply only heating element threaded/push type of triangle base/round base type 1.5/2 KW for geysers complete all as specified and directed.

Supply only in repair aperature plate assembly suitable for storage type water heater (geyser) 25/50 litre capacity complete all as specified and directed

Supply only copper/steel inner tank suitable for storage type water heater (geyser) 25/50 litre capacity complete all as specified and directed. .

Supply only geyser indicator pilot lamps(red and green lamps) with wiring round/square/rectangle suitable for geysers of any type complete all as specified and directed.

Supply only PVC connection pipe15 mm dia 600mm long with end nuts and washer, suitable for hot water and cold water outlet/inlet of geyser inlcuding removing old unserviceable item complete all as specified and directed.

Supply only thermostat BI- metal thermal relay suitable for 25 ltrs geyser complete all as specified and directed.

Supply only thermostat BI- metal thermal relay suitable for 50 ltrs geyser complete all as specified and directed.

S & F in repairs bib tap 15 mm dia standard pattern of PTMT white colour high pressure screwed for iron GI pipe/fittings inlcuding removing old unserviceable item complete all as specified and directed

S & F in repairs stop valve 15 mm dia, cast copper alloy chromium plated with crutch handle screwed both ends for GI pipe/fittings inlcuding removing old unserviceable item complete all as specified and directed

S & F copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade, 3 core ;2.5 sqmm and including connection to geyser and plug outlet and inlcuding removing old unserviceable item complete all as specified and directed

M & L for painting to storage type water heater(Geyser) of capacity 25/50 litres of any make/type to complete external body with two coat of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation of surfaces including marking MES Number with black paint complete all as specified and directed. Make of paint:-Asian/Berger/Nerolac (Note:-Painting work to be carried out after dismantling of storage type water heater(geyser)

Supply only in repair for Non returning valve (NRV) for any type Geysers complete all as specified and directed.

S & F in repairs three pin plug 15 Amps for any type of geysers complete all as specified and directed.

Supply only for safety valve /weight for any type geysers complete all as specified and directed.

Taking down u/s ceiling/exhaust fan and opening the body cover of ceiling fan/exhaust fan, any type, any make and cutting the existing winding without damaging the stator removing the coil insulation and putting new wire of suitable gauge with correct number of turns of auxiliary and main winding, and removing old damged bearings of any capacity and fixing new bearings, varnishing and baking complete and soldering new lead of copper wire three core cables of size 23/0.0076 testing, refixing and commissioning complete including transportation from area of AGE E/M Goa to workshop complete all as specified and directed for the following sizes. (Note:- Ball bearing should be measured & paid seperately in given schedule item)

Ceiling Fan 1200mm sweep

Exhaust fan 450 mm sweep

Exhaust fan 300 mm sweep

Exhaust fan 150 mm sweep

S & F ball bearing suitable size for ceiling fan any type and any make complete all as specified and directed.

S & F capacitor of the following capacity including removing old one complete all as specified and directed.

S & F anchor fastener bolt suitable for Exhaust fan complete all as specified and directed.

S & F in repairs exhaust fan 450mm sweep, 1400 RPM suitable for working on 230V, 50Hz, AC, SPN supply complete with louvers, fixed with suitable size GI bolts, nuts and washers duly grouted and connecting up with 0.75Sq.mm size 3 core PVC insulated flexible cable with multistranded copper conductor from ceiling rose to connector of exhaust fan complete all as specified and directed. Note - Old removed exhaust fan shall be deposited in MES store.

S & F in repairs exhaust fan 300mm sweep, 1400 RPM suitable for working on 230V, 50Hz, AC, SPN supply complete with louvers, fixed with suitable size GI bolts, nuts and washers duly grouted and connecting up with 0.75Sq.mm size 3 core PVC insulated flexible cable with multistranded copper conductor from ceiling rose to connector of exhaust fan complete all as specified. Note - Old removed exhaust fan shall be deposited in MES store.

S & F in repairs exhaust fan 150mm sweep, 900 RPM suitable for working on 230V, 50Hz, AC, SPN supply complete with louvers, fixed with suitable size GI bolts, nuts and washers duly grouted and connecting up with 0.75Sq.mm size 3 core PVC insulated flexible cable with multistranded copper conductor from ceiling rose to connector of exhaust fan complete all as specified and directed. Note - Old removed exhaust fan shall be deposited in MES store.

S & F in repairs exhaust fan louver shutter of any size fixed with suitable size GI bolts, nuts and washers with high quality and removing the old rusted louver from the wall complete all as specified and directed.

Removing refixing of defective socket , piano / modular switches, switch socket by repairing the same including provisioning minor screws and made functional complete all as specified and directed.

All as per item No 75 hereinbefore but lamp holder, bulk head fittings, ceiling rose etc complete all as specified and directed.

All as per item No 75 hereinbefore but LED fittings & FTL fittngs etc complete all as specified and directed.

All as per item No 75 hereinbefore but for all type of DBs etc complete all as specified and directed.

Shree Ram Enterprises

sapna enterprises

U k Enterprises