Special repair and renovation of room No.206 at Secretariat with attached toilet under SD-II, PBSD, APWD, Port Blair. Re-Call

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :

Thickness above 10 mm up to 25 mm

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :

Superior hard Wood Cat-II(A)

Providing and applying anti termite coat of Dr. Fixit in the internal portion of wall panelling use 0.25 Ltr./Sqm.

Manufacturing and fixing 12 mm thick superior quality chemically pressure treated edge glued finger jointed Rubco huat rubber wood boarding tongued & grooved fixed over rubber wood frame work/ rubber wood runner (Beam) of size 50 mm x 25 mm fixed at 300 mm c/c horizontally and 600 mm c/c vertically by secrete nailing with brass screw dully fixed to wall including provision of designed rubwood beading on top and bottom termination of wood boarding on top and bottom termination of wood boarding and finished with two coat of Melamine Polish over a coat of honey/natural colour wood filler putty etc., including preparation and applying sand paper and finishing to a glossy mat finish.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

Rubco haut rubber wood

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws,excluding panelling which will be paid for separately, all complete asper direction of Engineer-in-charge.

35 mm thick shutter with Rubco haut rubber wood

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in- charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).

Providing and fixing 3 mm dia G.I wire(upto 120 Cm length)for suspended ceiling,tied to M.S.roof truss /wooden truss etc complete as per direction of Engineer-In-Charge.

Providing and fixing designer cement board (of size 610x610 mm ) and fixed in aluminium frames as per the direction of ENgineer-In-Charge (frame work to be paid seperatately).

6 mm thick Cement fiber board as per IS: 14862

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

a) For fixed portion i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) (15.2.1) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/ 120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.

a) Flexible pipe i) 32 mm dia

Providing and fixing uplasticised PVC connection pipe with brass unions :

a) 30 cm length i) 15 mm nominal bore

Providing and fixing two way bib cock with wall flange (ORP 10041PM) of Jaquar or rquivalent of good quality as per the direction of Engineer-In-Charge.

Providing and fixing Angular stop cock of make Jaquar (COP-057PM) of good quality as per the direction Engineer-In-Charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) Single piece C8904 parryware make soft close seat cover with hinges fixing accessaries set and flushing cistern fitting etc.complete including cutting and making good the walls and floors wherever required :

Providing and fixing Wash basin of model no. CNS-WHT-813 Wall Hung Basin with Fixing Accessories Jaquar or equivalent with quality as per the direction of Engineer-in-Charge.

Providing and fixing towel ring round of make Jaquar of model no. ACN-1121N or equivalent of good quality as per the direction of Engineer-In-Charge.

Providing and fixing towel rail 600 m long of make Jaquar( ACN-CHR-1111SM) or equivalent with neccessary screws anf wooden cleats etc. as per the direction of engineer in- charge.

Providing and fixing Jet spray Hand shower (Health Faucet) with 1 metre long easy flex tube chrome finish and wall hook(Code No ALD-565) ( Jaquar or equivalent) at toilet.

Providing and fixing glass shelf 600 mm long of make Jaquar (ACN-1171N) or equvalent with neccessary screws etc. complete as per the direction of ENgineer-In-Charge.

Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete.

Providing and fixing brass sliding door bolts, ISI marked with nuts and screws etc. complete :

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Supply of bright finished brass tower bolts (barrel type) with necessary screws etc. complete.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :

125x85x5.5 mm (heavy type)