REPAIR AND MAINTENANCE OF INTERNAL ELECTRIFICATION, FITTINGS AND FIXTURES, INCLUDING MAINTENANCE OF SPLIT WINDOW ACs, WATER COOLERS REFRIGERATION UNITS AND ALLIED WORKS IN INHS PATANJALI AND MES OFFICE COMPLEX OF NAVAL BASE KARWAR

Rectifying defects in domestic fluorescent tube/CFL light fittings/wall security light fittings of any type and at any height, including ceiling roses and electric bells, by tightening loose connections and rectifying defects, testing, complete all as specified and directed.

Opening switch mounting plate at normal height up to 1.5 m, rectifying defects in fittings/fixtures such as switches, bell push, fan regulator, sockets etc. by tightening loose connections, refixing switch plate and testing to make functional, complete all as specified and directed. Note for Item No. 1.00 & 2.00: The unit rate quoted shall be deemed to include labour only for rectifying defects and making the fittings/fixtures functional. If replacement of parts/items is required to make the fittings functional the cost for labour and materials for the same shall be measured and paid for as “S&F in repairs” under relevant items of this Schedule hereinafter and in such cases the above items shall not be measured/paid.

Taking down carefully copper point wiring (light, fan, socket and power) complete (fittings to be measured separately) and making good surfaces of walls/floors etc complete all as specified and directed.

M&L for surface point wiring 1100 volts grade 1.5 Sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC casing & capping medium grade with all accessories on wall/ceiling /floor/roof etc, sunk pressed steel or cast iron terminal boxes with 3mm thick plastic laminated sheet top cover including 1.5 Sqmm PVC insulated FRLS unsheathed cable 1100 volts multistranded copper conductor conforming to IS:694:1990 with ISI marking as continuous earth wire connected to common earth dolly all as specified and directed for One light / fan point controlled by one switch.

M&L for surface point wiring 1100 volts grade 1.5 Sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC casing & capping medium grade with all accessories on wall/ceiling /floor/roof etc, sunk pressed steel or cast iron terminal boxes with 3mm thick plastic laminated sheet top cover including 1.5 Sqmm PVC insulated FRLS unsheathed cable 1100 volts multistranded copper conductor conforming to IS:694:1990 with ISI marking as continuous earth wire connected to common earth dolly all as specified and directed for One 3 pin socket outlet 5 Amp on same board with other switches.

M&L for surface point wiring 1100 volts grade 1.5 Sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC casing & capping medium grade with all accessories on wall/ceiling /floor/roof etc, sunk pressed steel or cast iron terminal boxes with 3mm thick plastic laminated sheet top cover including 1.5 Sqmm PVC insulated FRLS unsheathed cable 1100 volts multistranded copper conductor conforming to IS:694:1990 with ISI marking as continuous earth wire connected to common earth dolly all as specified and directed for One 5 pin socket outlet 5 Amp on independent board.

M&L for surface point wiring 1100 volts grade 1.5 Sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC casing & capping medium grade with all accessories on wall/ceiling /floor/roof etc, sunk pressed steel or cast iron terminal boxes with 3mm thick plastic laminated sheet top cover including 1.5 Sqmm PVC insulated FRLS unsheathed cable 1100 volts multistranded copper conductor conforming to IS:694:1990 with ISI marking as continuous earth wire connected to common earth dolly all as specified and directed for One 3 pin 5 Amps socket outlet independent but below the switch board of light points in the same vertical plate.

M&L for surface point wiring 1100 volts grade 2.5 Sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC casing & capping medium grade with all accessories on wall/ceiling /floor/roof etc, sunk pressed steel or cast iron terminal boxes with 3mm thick plastic laminated sheet top cover including 2.5 Sqmm PVC insulated FRLS unsheathed cable 1100 volts multistranded copper conductor conforming to IS:694:1990 with ISI marking as continuous earth wire connected to common earth dolly all as specified and directed for Power point on independent board and size of earthing cable 2.50 Sqmm.

M&L for surface point wiring 1100 volts grade 4 Sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC casing & capping medium grade with all accessories on wall/ceiling /floor/roof etc, sunk pressed steel or cast iron terminal boxes with 3mm thick plastic laminated sheet top cover including 4 Sqmm PVC insulated FRLS unsheathed cable 1100 volts multistranded copper conductor conforming to IS:694:1990 with ISI marking as continuous earth wire connected to common earth dolly all as specified and directed for one 3 pin socket outlet 15 Amps Power point on independent board and size of earthing cable 4 Sqmm.

M&L for point wiring with 1.5 Sqmm PVC (FRLS) insulated sheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continuous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS) insulated sheathed multi stranded copper conductor cable draw in existing conduit complete all as specified and directed for One light/fan point controlled by one switch.