Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.2 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹36.5 L+₹1.3 L (3.60%)Admitted-Finance 154 HANUMAN MANDIR DIKSHI TAL NIPHAD DIST NASHIK 422 302 | NASHIK | MAHARASHTRA | 422302 | L2 | Admitted-Finance | |
| 3 | L3₹37.9 L+₹2.7 L (7.61%)Admitted-Finance | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | MAHIMA CONSTRUCTION L2 | SAFFRON ENGINEERS L1 | shubham Enterprises L3 |
|---|---|---|---|---|---|---|
| 1.00Notes for Item No.1 & 21 (i) All the defective Spares / Material required will be measured and paid seperately. (ii) After each service of each door signature of users must be obtaied for satisfactory working and submited before claiming payment. (iii) Contractor should attend the complaint immediately, when notified by Dept if the door fails to work During the Contrcat Period (iv) Contrcator has to arrange the Complait Book and to be submitted duly signed from User after attendeing the same (v) The complaint should be attended by the contractor on the same day when notified, failing which Rs1,500/- per day per complaint will be cahrged. (vi) T&P required for repair / testing shall be included in the quoated rates | ||||||
| 2.00 | M&L for carrying out Preventive Maintenance Quarterly for "SUNRISE MAKE" MOTORIZED DOOR- Half Opening : Size : 16m width, 10m height Installed at New hangar = 2 doors, P-145 = 1 door, P-135 = 1 door which includes the following:-
(a) Check All connections of conductors at main distribution box are properly conneccted.
(b) Check all conductors from main distribution box to electric motor, must not weak or burnt or damaged insulation.
(c) Check total electrical panel cabling, must not weak or burnt or damaged insulation.
(d) Check all Miniature circuit brakers, must not have loose contact or damaged, must be functioning properly
(e) Check all components in electrical panel like RYB indicators, Emergency stop, Push buttons for forward & reverse motion, contactor, Buzzer, O/L relay etc. must have proper connections, functioning properly.
(f) Check all joints of electrical conductors, must be tight properly with lugs & fastners. | 16 | Once in Qtr (Per Door) | 12,330 ₹1,97,280 Lowest | 13,500 ₹2,16,000 | 14,400 ₹2,30,400 |
| 3.00(g) Check Electrical panel box, check locks & fastners properly tight, make it dust & insects free. (h) Check wire rope mountings, wire rope, cable conductors, cable collector, check welding, check fastners, lubricate cable collector wheel, check electrical festun conductor, for proper functioning. (j) Check guide rollers assembly (i.e. wheel, shaft cirlips, fasteners & self lubricating bearings) check mounting fastners tigtness & alignment. Check clearance between guide rail & rollers. (k) Check fixings of all conduites, MCBs, electrical panel & machine cover. Tight all fastners properly. (l) Check Drive motor- all fastners, terminal box connections, earthing, starting & running current rating, noice, temperature, overload, speed, fan & ventilation. (m) Check worm gearbox- all fastners, any leakage of lubricant, seals, lubricant level, lubricant viscosity, noice of worm & worm wheel meshing, output shaft position, cirlips, extended shaft alignment, key, temperature. (n)Check chain sprockets- tooth must not be grinded above 20%. Alignment & parallelism of sprockets, fastners & key. Check Chain slippage or noice . (o) Check chain- Tight chain suitable to function, extension of chain is allowed max. 3%; so check pitch of tooth & chain links. Check chain lock properly installed, Lubricate chain & sprockets by Spheerol EPL 2 (EN - SDS) (p) Check drive and driven wheels assemblies- check traid diameter & traid width of wheel, wearout must be less than 15%. Check bearings, circlips, axels, fastners, spacers & alignment. | ||||||
| 4.00(q) Check Corrugated precoated color sheets- check by noise or vision all self tapping screws, tight if any loose. Attach a same sheet patch at any tored sheet. Seal holes by sealing agent. (r) Check Door panel structure- Check flatness & in a plane, any welding crack, all structural members in position, color damage, machine base frame structure, rail & panel gap & parallelism. (s) Check Bottom Rail & top guide rail- check for top & bottom rail welding crack if any, weld it. Clean Bottom rail. Check Flatness, parallelism equal clearance in guide angles, dent or bend of botom rail if any, grind it & make smooth. (t) Submission of report as per above (a) to (s) duly signed by the contractor and user. | ||||||
| 5.00 | Supply only galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour (as per existing) having tensile strength of 550 mPa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. | 80 | SQM | 630 ₹50,400 Lowest | 650 ₹52,000 | 750 ₹60,000 |
| 6.00 | Supply only cantilever roller with self lubricating frictionless bearings (rollers and bearings of existing size suitable for existing door) | 1 | Each | 6,300 ₹6,300 | 7,400 ₹7,400 | 6,000 ₹6,000 Lowest |
| 7.00 | Supply only chain and locking arrangement as per existing size and material. | 2 | Each | 12,330 ₹24,660 Lowest | 16,500 ₹33,000 | 14,400 ₹28,800 |
| 8.00 | Supply only axel, bearings, circlip assembly complete as required at site. | 1 | Each | 22,779 ₹22,779 | 26,700 ₹26,700 | 21,000 ₹21,000 Lowest |
| 9.00 | Supply only pair of chain & drive sprocket complete as required at site. | 1 | Each | 12,330 ₹12,330 Lowest | 16,500 ₹16,500 | 14,400 ₹14,400 |
| 10.00 | Supply only cable Collector & wire rope Assembly complete as required at site. | 1 | Each | 30,600 ₹30,600 | 30,500 ₹30,500 | 30,000 ₹30,000 Lowest |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
15 Sept 2026, 6:00 pmClosed
Garrison Engineer Nasik Road
Garrison Engineer Nasik Road AOP Complex Near AOP Gate PO Gandhinagar Nasik 422006
As per Tender Documents
2026_MES_784902_1
GE/NRC/8837/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer Nasik Road
As per NIT
8 documents required · 8 mandatory
₹500
Garrison Engineer Nasik Road
₹76,000
Yes
21 Sept 2026
18 Aug 2026
17 Sept 2026
18 Aug 2026
15 Sept 2026
1 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 2 | M&L for carrying out Preventive Maintenance Quarterly for "SUNRISE MAKE" MOTORIZED DOOR- Half Opening : Size : 16m width, 10m height Installed at New hangar = 2 doors, P-145 = 1 door, P-135 = 1 door which includes the following:-
(a) Check All connections of conductors at main distribution box are properly conneccted.
(b) Check all conductors from main distribution box to electric motor, must not weak or burnt or damaged insulation.
(c) Check total electrical panel cabling, must not weak or burnt or damaged insulation.
(d) Check all Miniature circuit brakers, must not have loose contact or damaged, must be functioning properly
(e) Check all components in electrical panel like RYB indicators, Emergency stop, Push buttons for forward & reverse motion, contactor, Buzzer, O/L relay etc. must have proper connections, functioning properly.
(f) Check all joints of electrical conductors, must be tight properly with lugs & fastners. | 16 | Once in Qtr (Per Door) | - | - |
| 3 | (g) Check Electrical panel box, check locks & fastners properly tight, make it dust & insects free.
(h) Check wire rope mountings, wire rope, cable conductors, cable collector, check welding, check fastners, lubricate cable collector wheel, check electrical festun conductor, for proper functioning.
(j) Check guide rollers assembly (i.e. wheel, shaft cirlips, fasteners & self lubricating bearings) check mounting fastners tigtness & alignment. Check clearance between guide rail & rollers.
(k) Check fixings of all conduites, MCBs, electrical panel & machine cover. Tight all fastners properly.
(l) Check Drive motor- all fastners, terminal box connections, earthing, starting & running current rating, noice, temperature, overload, speed, fan & ventilation.
(m) Check worm gearbox- all fastners, any leakage of lubricant, seals, lubricant level, lubricant viscosity, noice of worm & worm wheel meshing, output shaft position, cirlips, extended shaft alignment, key, temperature.
(n)Check chain sprockets- tooth must not be grinded above 20%. Alignment & parallelism of sprockets, fastners & key. Check Chain slippage or noice .
(o) Check chain- Tight chain suitable to function, extension of chain is allowed max. 3%; so check pitch of tooth & chain links. Check chain lock properly installed, Lubricate chain & sprockets by Spheerol EPL 2 (EN - SDS)
(p) Check drive and driven wheels assemblies- check traid diameter & traid width of wheel, wearout must be less than 15%. Check bearings, circlips, axels, fastners, spacers & alignment. | - | - | - | - |
| 4 | (q) Check Corrugated precoated color sheets- check by noise or vision all self tapping screws, tight if any loose. Attach a same sheet patch at any tored sheet. Seal holes by sealing agent.
(r) Check Door panel structure- Check flatness & in a plane, any welding crack, all structural members in position, color damage, machine base frame structure, rail & panel gap & parallelism.
(s) Check Bottom Rail & top guide rail- check for top & bottom rail welding crack if any, weld it. Clean Bottom rail. Check Flatness, parallelism equal clearance in guide angles, dent or bend of botom rail if any, grind it & make smooth.
(t) Submission of report as per above (a) to (s) duly signed by the contractor and user. | - | - | - | - |
| 5 | Supply only galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour (as per existing) having tensile strength of 550 mPa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. | 80 | SQM | - | - |
| 6 | Supply only cantilever roller with self lubricating frictionless bearings (rollers and bearings of existing size suitable for existing door) | 1 | Each | - | - |
| 7 | Supply only chain and locking arrangement as per existing size and material. | 2 | Each | - | - |
| 8 | Supply only axel, bearings, circlip assembly complete as required at site. | 1 | Each | - | - |
| 9 | Supply only pair of chain & drive sprocket complete as required at site. | 1 | Each | - | - |
| 10 | Supply only cable Collector & wire rope Assembly complete as required at site. | 1 | Each | - | - |
| 11 | Supply only main power supply copper flexible cable of size 2.5 Sqmm x 4 core, FRLSH, unarmoured complete. | 100 | RM | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
8837SOC.xls
Additional Documents • 0.07 MB
BOQ_879520.xls
BOQ • 0.43 MB
8837PS.pdf
Tender Documents • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .