Estimate for electrification of Additional at village Amod (Khanpur road) PVTG Habitation Amod under Bahadurpur Dc

Provision- Estimate for electrification of Additional at village Amrod (Khanpur road ) PVTG habitation- Amrod

140 Kg.,8.0 Mtrs. long PCC pole

140 kg. 8.0 mtr. Long PCC Pole erection-[Including Pit Digging- Base padding of pole by Stone Block/Pre cost Block, pole erection, back filling/boulder, earthing coil]

Transportation of 140 kg. 8.0 mtr. Long PCC Pole Including with Material Transportation from Area store Guna/Gwalior/Bhopal to working Site (0 to 50 KM.) (Per No. Per KM) as per RCA GUNA No.6981-82 Dt. 11.03.2024 (41 KM *Rs. 17.1/KM)=701.1/per Pole *11 No. 140 kg. 8.0 mtr. Long PCC Pole

(Rep-BGP) DTR 25 KVA 11/.04 KV BIS Certified LEVEL-II

11 KV D.O. Fuse Unit Polymer type

Labour for 11 KV D.O. Fuse Unit Polymer type

11 KV Pin Insulator Polymer Composit (5 KN)

Labour for 11 KV Pin Insulator Polymer Composit (5 KN)

11 KV Strain hardware (T&C type) fittings

11 KV(45KN) Composite Polymer Disc Insulators

Labour for 11 KV(45KN) Composite Polymer Disc Insulators

3 Pin 5A Socket (Two no. Piano type switch, Bulb Bakelite Holder with wiring & E

9 KV Gapless type(5 KA) polymer lightening arrestor

Labour for 9 KV Gapless type(5 KA) polymer lightening arrestor

AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.)

Stringing of AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.)

Aluminium Binding wire and tape

Aluminium paint

Labour for Aluminium paint

Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG)

Labour for Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG)

Back filling of poles with boulders.

Bentonite compound powder

Bi-metallic clamps Distribution Transformers Bushing

Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC

Clamps for neutral for AB Cable

Labour for Clamps for neutral for AB Cable

Complete jumpering of DTR

Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay

Labour for Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay

Concreting of structures & foundation (1:3:6)

Labour for Concreting of structures & foundation (1:3:6)

Danger Boards Enamelled 11 KV

Labour for Danger Boards Enamelled 11 KV

Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire

Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole

G.I. STRIP 25X3 MM1

Labour for G.I. STRIP 25X3 MM1

G.I. Wire 3.15 mm. (10 SWG)

G.I. WIRES 4.0 MM. (8 SWG)

Labour for G.I. WIRES 4.0 MM. (8 SWG)

G.I.Pipe 40 mm Dia C grade type

Labour for G.I.Pipe 40 mm Dia C grade type

Galvanized nut & bolt with washer

Galvanized pipe 25mm

Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor

LED Lamp with 9 Watt (Complete)

LT A B cable Suspension clamps (Galvanized)

Labour for LT A B cable Suspension clamps (Galvanized)

LT A.B Cable tension clamps (Galvanized)

Labour for LT A.B Cable tension clamps (Galvanized)

LT XLPE Arial Bunch XLPE Cable 3X25 + 1X16 + 1X25 Sq mm. with aluminium alloy bare messenger wire

Stringing of LT XLPE Arial Bunch XLPE Cable 3X25 + 1X16 + 1X25 Sq mm. with aluminium alloy bare messenger wire

M.S.Nuts with Bolts

MCB of 16 Amp

METER BOARD 400X400X28 MM MADEUP OF FIBERGLASS REINFORCED POLYSTER IS:13410(1992)

Labour for METER BOARD 400X400X28 MM MADEUP OF FIBERGLASS REINFORCED POLYSTER IS:13410(1992)

Meter cum protection box for 25 KVA DTR

Labour for Meter cum protection box for 25 KVA DTR

Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm)

Labour for Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm)

Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm)

Labour for Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm)

PVC 2 CORE UN ARMOURED 2.5 SQMM ALUMINIUM CONDUCTOR

Stringing of PVC 2 CORE UN ARMOURED 2.5 SQMM ALUMINIUM CONDUCTOR

PVC/Rubber Bushes

Rack Bolt/Screw

Red oxide paint

Labour for Red oxide paint

Service Pipe Clamp

Shackle bolt with Clamp

Shackle Insulators 90X75 mm.

Single Phase Service connection box (Deep Drwan Metal Service Connection Boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector-

Labour for Single Phase Service connection box (Deep Drwan Metal Service Connection Boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector-

Single phase Electronic meter with data downloading facility & box 5-30 Amps.

Labour for Single phase Electronic meter with data downloading facility & box 5-30 Amps.

Stay Insulators 90X65mm

Stay set complete without Stay wire 16 mm. (Painted)

Labour for Stay set complete without Stay wire 16 mm. (Painted)

STAY WIRE 7/3.15 MM.(7/10 SWG)

Stone Block/Pre cast block for base pedding(450X450X75MM)

Switch Board

Three Phase Service connection box(Deep Drwan Metal Service Connection Boxes ) with one incoming up to 35 mm2 and 4 no outgoing up to 16 mm2 with insulated multiple outgoing connector-

Labour for Three Phase Service connection box(Deep Drwan Metal Service Connection Boxes ) with one incoming up to 35 mm2 and 4 no outgoing up to 16 mm2 with insulated multiple outgoing connector-

Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box

Labour for Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box

Wooden Board 10"x8"

XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts

Stringing of XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts

XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts

Stringing of XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts

11 KV 'V' cross-arms angle type (65x65x6 mm angle)

Labour for 11 KV 'V' cross-arms angle type (65x65x6 mm angle)

11 KV Top clamps angle type 65x65x6 mm

Labour for 11 KV Top clamps angle type 65x65x6 mm

D.C. Cross arms 4 ft centre to centre (100X50x6 mm.) channel

Labour for D.C. Cross arms 4 ft centre to centre (100X50x6 mm.) channel

D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel

Labour for D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel

Transformer mounting DC cross-arm 100 X 50 x 6 mm, channel

Labour for Transformer mounting DC cross-arm 100 X 50 x 6 mm, channel

D.O.Mounting Channel 75x40x6mm

Labour for D.O.Mounting Channel 75x40x6mm

Horizontal & Cross Bracing set of MS angle of 50X50X6 mm for 4 ft (1.2 mtr ) centre DP

Labour for Horizontal & Cross Bracing set of MS angle of 50X50X6 mm for 4 ft (1.2 mtr ) centre DP

Horizontal & Cross Bracing set of MS angle of 50X50X6 mm for 8 ft (2.4 mtr ) centre DP

Labour for Horizontal & Cross Bracing set of MS angle of 50X50X6 mm for 8 ft (2.4 mtr ) centre DP

Transformer belting with 50 X 50 X 6 mm.angle with two cross fixing channels

Clamp for 8 Mtr PCC Pole Size-610 mm ,Wt- 1.46 Kg using 50X6 mm Ms Flat

Back Clamp for 8 Mtr PCC Pole Size- 448 mm ,Wt- 1.075 Kg using 50X6 mm Ms Flat

Please Enable Macros to View BoQ information