Fixing of Fire Protection System

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: 10 HP-900 LPM with base frame & AVM pads

Starter Panel for the above with Auto / Manual operation and to avoid simultaneous operation of the pumps.

Supply & Laying of 3 Core 10 Sq.mm Copper Armoured Cable with GI Wire including End Termination.

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts,gaskets etc. including welding, supports etc. of following sizes complete as required 100 mm

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts,gaskets etc. including welding, supports etc. of following sizes complete as required 80 mm

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts,gaskets etc. including welding, supports etc. of following sizes complete as required 50 mm

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts,gaskets etc. including welding, supports etc. of following sizes complete as required 40 mm

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts,gaskets etc. including welding, supports etc. of following sizes complete as required 25 mm

Supplying and fixing single headed hydrant valve with instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 100 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 80 mm

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 50 mm

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required 100mm dia

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia Stainless Steel (Grade 304) male and female couplings dulybound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 30 meter length 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 and 20 mm ABS Shut off nozzle. Drum and brackets for fixing the equipmets on wall.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

Supplying & fixing 63 mm dia Stainless Steel Branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required

Supply & Fixing of Weather proof hose cabinets fabricated from 16 g M.S. Sheet with full glass door and locking arrangement. The cabinet shall be painted with one coat of primer and finished stove enamelled "Fire Red" (Approx 0.75m x 0.6 m x 0.3 m) Size.

Supplying and fixing of 2 way fire brigade connection of cast iron body with stainless steel male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

Designing of Automatic Down comer fire fighting system as per site requirement /DFS rules, within the BOQ quantity and consultation with CRPF officials.

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Horizontal side wall sprinkler

Providing & fixing of pressure switch with control valve in M.S. pipe line including connection etc. as required

Providing & fixing of pressure guage with control valve in M.S. pipe line etc. as required

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets,center bracket, stockbar of following sizes complete as required. 750 mm

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets,center bracket, stockbar of following sizes complete as required. 1000mm

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets,center bracket, stockbar of following sizes complete as required. 1500mm

Providing & fixing of pressure gauge with control valve in M.S. pipe line including connection etc. as required

Providing & fixing of ORIFICE PLATE

Providing & fixing of ROSETTE PLATE

Designing of Sprinkler fire fighting system as per site requirement / DFS rules, within the BOQ quantity and consultation with CRPF officials.

Supplying, installation, testing & commissioning 4 Zone Convensional Fire Alarm panel, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 complete with all connections, interconnections, battery as required

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required

Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

Supplying, installation, testing & commissioning of beam detector complete with emitter and receiver complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable

Designing of Automatic fire alarm system as per site requirement / DFS rules, within the BOQ quantity and consultation with CRPF officials.

Providing and fixing OF ISI marked (IS:15683) Portable fire Extinguisher, Carbon- dioxide type flat base including valve, discharge hose & complete in all respects including initial fill with C02 gas confirming to IS:307-1966. Capacity 4.5 Kg

Providing and fixing of ISI marked 4 kg ABC type Modular fire Extinguisher, complete in all respects

Providing heavy duty Mild Steel support to lay pipes above ground including supply & fabricating at site as per requirement

Running and testing the Automatic Down comer, Automatic fire alarm, Sprinkler & Extingusher upto the maximum permissable limit in the presence of CRPF officials and keep the system in AUTO mode by deputing required Manpower for a week

Providing training to CRPF staff & School staff regarding Operation & Maintenance of Automatic Down comer, Automatic fire alarm, Sprinkler & Extingushers

Maintenance of the Installed Automatic Down comer, Automatic fire alarm, Sprinkler & Extingusher for One year including weekly visit and submission of report

Providing and fixing CPVC Gate Valve: 25 mm size

Providing and fixing CPVC union socket 25 mm size

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 100 mm nominal dia Pipes

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter Class I

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) sqm 333.35

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sgm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during ransportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Please Enable Macros to View BoQ information