Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance NO 6 NJ BUILDING GANGAMMA TEMPLE ROAD JALAHALLI POST BANGALORE 560 013 | BANGALORE | BANGALORE | KARNATAKA | 560013 | Admitted-Finance |
| 2 | Admitted-Finance CHAMAVILA CHEELI CHITTADI POST PALAKKAD DIST KERALA 678706 | PALAKKAD | KERALA | 678706 | Admitted-Finance |
| 3 | Admitted-Finance NO 71 1ST CROSS MUNESWARA BLOCK PALACE GUTTAHALLI BANGALORE 560 003 | BENGALURU URBAN | KARNATAKA | 560003 | Admitted-Finance |
| 4 | Admitted-Finance DOOR NO 2 561 BEHIND HOINA HOSTEL MOOGAMBIKA NAGAR PERIYAPALAYAM ROAD THIRUNINRAVUR CHENNAI 602 024 | CHENNAI | THIRUVALLUR | TAMIL NADU | 602024 | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
7 Jan 2023, 6:00 pmClosed
GE (AF) Yelahanka
GE (AF) Yelahanka Bangalore - 63
MAINTENANCE OF RUNWAY LIKE PME, PATCH REPAIRS, SHOULDER REPAIRS, MAFI BOARDS ETC AT AFS YELAHANK
2022_MES_567088_3
8130/E8
Open Tender
Civil Works
Item Rate
90 days
AF Stataion Yelahanka
As per NIT
9 documents required · 9 mandatory
₹500
GE (AF) Yelahanka
₹99,000
Yes
9 Jan 2023
26 Dec 2022
9 Jan 2023
26 Dec 2022
7 Jan 2023
26 Dec 2022
Amount
Rolling and consolidating dry bituminous macadam sufrace any thickness and any No of passes to the satisfaction of Engr-in-charge with 8 tonne to 12 tonne capacity road roller. Note:- Rolling on Runway surface to be done with due care and avoilding all types of runway lights and other components. Any damanges to such items has to be replaced by the contractor at their own cost.
Material and labour for preparing old black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with using air blower to remove all loose dirt etc., complete and applying evenly a coat of cold Polymer Modified Emulsion (PME) by using mechanical sprayer, spraying of total cold liquid PME 0.50 Ltr per Sqm (undiluted) for single coat with mineral filler as recommended by manufacturer of PME (after diluting with water), each coat diluted in the ratio 1:1 (PME : Water) and ensure uniform finish on applied area. Complete all as per manufacturer instructions and all as specified and directed by Engr-in-Charge. Make :- Polymeric Modified Emulsion ( PME) Brand Name : EMULCOTE of M/s L N Petro Chem Pvt Ltd / HINMAT PLUS (Polymer Modified Emulsion) of Hindustan Colas Pvt ltd. NOTES: The tender shall take into consideration the following points while quoting his rate for this item :- (a) The work shall be got carried out from the manufacturer or his authorised applicator only. (b) Care shall be taken to fill wider gaps/cracks with 0.60 mm to 2.36 mm size coarse sand as per manufacturer's instructions. (c) A Performance guarantee certificate for two years shall be submitted by the contractor to the GE on completion of the work as specified. (d) Contractor shall carryout friction test using CFME ( Continuous Friction Measuring Equipment ). The test is to be got done from Government Engineering College/Bangalore University. Nothing extra shall be payable on this account, the quoted rates are deemed to be inclusive for carrying out this test also. The test using CFME will be conducted on the surface of application of PME before and after application of PME and certificate towards this will be submitted for the same
Material and labour for preparing old black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with using air blower to remove all loose dirt etc., complete and applying evenly a coat of cold Polymer Modified Emulsion (PME) by using mechanical sprayer, spraying of total cold liquid PME 0.33 Ltr per Sqm (undiluted) for single coat with mineral filler as recommended by manufacturer of PME (after diluting with water), each coat diluted in the ratio 1:2 (PME : Water) and ensure uniform finish on applied area. Complete all as per manufacturer instructions and all as specified and directed by Engr-in-Charge. Make :- Polymeric Modified Emulsion ( PME) Brand Name : EMULCOTE of M/s L N Petro Chem Pvt Ltd / HINMAT PLUS (Polymer Modified Emulsion) of Hindustan Colas Pvt ltd. NOTES: The tender shall take into consideration the following points while quoting his rate for this item :- (a) The work shall be got carried out from the manufacturer or his authorised applicator only. (b) Care shall be taken to fill wider gaps/cracks with 0.60 mm to 2.36 mm size coarse sand as per manufacturer's instructions. (c) A Performance guarantee certificate for two years shall be submitted by the contractor to the GE on completion of the work as specified, (d) Contractor shall carryout friction test using CFME ( Continuous Friction Measuring Equipment ). The test is to be got done from Government Engineering College/Bangalore University. Nothing extra shall be payable on this account, the quoted rates are deemed to be inclusive for carrying out this test also. The test using CFME will be conducted on the surface of application of PME before and after application of PME and certificate towards this will be submitted for the same.
Material and labour for one coat of painting lines, dashes, arrows , letters, etc on bituminous / concrete surfaces exceeding 10cm width with approved water base paint of color white , Golden yellow, deep orange , PO red and black as per the requirementin the Air field including preparation of surfaces complete all as specified and directed. Make : APCOTRAK of Asian paints or Equivalent in Berger/Shalimar Coverage area of paint shall be 6 Sqm / Ltr adding 10-15% of potable water (Dispersals and taxitracks)
Material and labour for one coat of painting lines, dashes, arrows , letters, etc on bituminous / concrete surfaces exceeding 10cm width with approved water base paint of color white , Golden yellow, deep orange , PO red and black as per the requirementin the Air field including preparation of surfaces complete all as specified and directed. Make : APCOTRAK of Asian paints or Equivalent in Berger/Shalimar Coverage area of paint shall be 10 Sqm / Ltr adding 10-15% of potable water (Runway surfaces)
M&L for approved red earth filling in Shoulders of flight strips duly cleared the grass and vegetation growth and laying of earth in layers n exc 25cm thick spread, levelled and rammed and rolled with 8-10 TON Road Roller including watering in the required compaction level and gradient/slope all as specified and as directed. Note: water as required will have to be brought in bouser as directed.
Supply and fix 5mm thick polycarbonate sheet panel, suitable for fixing stickers in one side for various types of Sign board in Air Fied area of any size as in repairs/replacement and for new sign boards, all as specified and directed .
Material and labour for HIP (Reflective) stickers in repairs and replacement of various size and shape on different types of sign boards of Air field area using 3M ™ High Intensity Grade Prismatic Reflective sheeting 3930 to 3937 series of approved colour fixing with pressure sensitive adhesive for unique construction providing high levels of retroreflectivity for multiple traffic situations providing long term reflectivity and durability all as specified and directed.
NAVREET CONSTRUCTION
jk construction
Mahant Construction Co.
Thirumala Construction
Lakkaiah Rangaswamy
SRI AYYAPPA ENTERPRISES
ANAND REFRIGERATION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .