Loading
Loading…
Loading…
Tender Value
₹5.1 Cr
EMD Value
₹4.0 L
Closing Date
20 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
CTL
15 conditions · 4 needing a document upload
The Minimum Eligibility Criteria for open tenders costing Rs.50 Lakhs & above is given below:-Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar Nature of work- "Any Type of Civil work viz. building up to G+4 and structures work, pipelines, underground and overhead tanks, foundation treatment works in any Railway embankment / cutting, any earth work, cover over platform, bore wells, level crossing works including lifting barriers, cement concrete apron works etc." ( Ref - GM(W)CSMT's letter No. W.187.R.A.VIII date 10/01/2008
16 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Documents to be Submitted Along with Tender: (i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
Following documents shall be submitted by the tenderer
(a)Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(b)HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(c)Partnership Firm: (i) All documents as mentioned in Para18 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 andPara17 of the Tender Form (Second Sheet) of Instructions to the tenderers and conditions of tender of tender document and as amended/corrected upto latest correction slip
(d)Joint Venture (JV): All documents as mentioned in Para 17 of the Tender Form (Second Sheet)of General Conditions of Contract-2022 and Para16 of the Tender Form (Second Sheet) of Instructions to the tenderers and conditions of tender of tender document and as amended/corrected upto latest correction slip.
(e)Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv)All other documents in terms Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(f)LLP (Limited Liability Partnership): (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (v)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v)All other documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(g)Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) Acopy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract- 2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip. (iii)If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender. (iv)After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted. (v) A tender from JV shall be considered only where permissible as per the tender conditions. (vi) The Railway will not be bound by any change of power of attorney or in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
Sole proprietor/a company or a partnership firm/joint venture (JV)/registered society/registered trust / HUF/LLP, Power of Attorney etc: The tenderer whether sole proprietor/ a company or a partnership firm/ registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and f\lather to dealwith the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shallbe summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with allother contractualactivities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate
1. Sewagram- provision of waiting room (separate for ladies & gents) CBS room, relocation of divyang toilet, tte room, electric room, extension / improvement in exiting in waiting hall, booking office, improvement in retiring room, VIP room, seating arrangement, old toilet block (pf-4/5 Nagpur end & urinal on pf 2/3 Nagpur end) & in water stand, prov. of mural painting. 2. Sewagram-Provision of COP at PF 2/3(150m) & 4/5(150m) in connection with redevelopment of station. 3. Sewagram- Improvement to platform surface of PF 2/3 & 4/5 in connection with redevelopment of Sewagram station.
DRMWNGP-20-2026-01
DRMWNGP-20-2026-01
Open
Works - General
12 Months
Nagpur, Maharashtra
₹0
₹4.0 L
20 Mar 2026
26 Feb 2026
6 Mar 2026
248 items across 10 schedules · ₹3,64,30,891.44 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation as per approved drawings and dumping at embankment site or spoil heap, within railway land, including 50 m lead and 1.5 m lift, the lead to be measured from the centre of gravity of excavation to centre of gravity of spoil heap: the lift to be measured from natural ground level and paid for in layers of 1.5 m each, including incidental work, as per specifications-in - All kinds of soils. (USSOR- 2011 Item No. 011011) | cum | 423.83 | 119 | 50,435.77 |
| 2 | Earth work in excavation as per approved drawings and dumping at embankment site or spoil heap, within railway land, including 50 m lead and 1.5 m lift, the lead to be measured from the centre of gravity of excavation to centre of gravity of spoil heap: the lift to be measured from natural ground level and paid for in layers of 1.5 m each, including incidental work, as per specifications-in - Ordinary Rock (Not requiring blasting). (USSOR-2011 Item No. 011012) | cum | 37.20 | 322.03 | 11,979.52 |
| 3 | Extra over item 011010 for excavation in foundations for buildings and bridges to cover dressing to neat dimension and plumbing sides etc. Note : Dressing under this item is payable for the total quantity of excavation in foundation and not partly. (USSOR-2011 Item No. 012010) | cum | 361.03 | 11.5 | 4,151.84 |
| 4 | Providing and laying in position cement concrete of specified proportion excluding cost of cement, centering and shuttering - All works upto Plinth level :1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40 mm nominal size). (USSOR-2011 Item No. 031012) | cum | 5.93 | 1,641.83 | 9,736.05 |
| 5 | Supply and using cement at worksite :OPC 53 grade. (USSOR-2011 Item No. 033062) | Tonne | 164.75 | 6,095 | 10,04,151.25 |
| 6 | Providing and laying in position M 20 Grade concrete for reinforced concrete structural elements but excluding cost of centering, shuttering, reinforcement and Admixtures in recommended proportion (as per IS:9103) to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer in charge - All work up to plinth level, including raft foundation of washable aprons, HS tank, pile cap, footings of FOB, and Platform shelter etc. (USSOR-2011 Item No. 041011) | cum | 31.44 | 2,564.7 | 80,634.17 |
| 7 | "Providing and laying in position M 20 Grade concrete for reinforced concrete structural elements but excluding cost of centering, shuttering, reinforcement and Admixtures in recommended proportion (as per IS:9103) to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer in charge - All work in buildings above plinth level up to floor two level." (USSOR-2011 Item No. 041012) | cum | 115.78 | 2,820.94 | 3,26,608.43 |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, raft foundation of washable aprons, Pile caps, Footings of FOB etc. (USSOR-2011 Item No. 042011) | Sqm | 148.66 | 114.9 | 17,081.03 |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies, FOB slabs, walkway slabs and access platform. (USSOR-2011 Item No. 042013) | Sqm | 450.00 | 273.4 | 1,23,030 |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, bed blocks, girders, bressumers and cantilevers. (USSOR-2011 Item No. 042014) | Sqm | 355.73 | 232.9 | 82,849.52 |
| 11 | Providing, hoisting and fixing in position up to floor two level M20 Grade precast RCC work including setting in cement mortar 1:3 (1 cement : 3 coarse sand) and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete including cost of centering, shuttering, finishing, Admixtures in recommended proportion (as per IS:9103) to accelerate, retard setting of concrete, improve work ability without impairing strength and durability, excluding cost of cement and steel reinforcement, as per approved plan & direction of Engineer in charge. - In slabs for drain covers, manhole covers, flue tops etc. (USSOR-2011 Item No. 043015) | cum | 5.00 | 3,189.41 | 15,947.05 |
| 12 | Supplying Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. - Thermo-Mechanically Treated bars. (USSOR-2011 Item No. 045016) | Kg | 21229.06 | 69.53 | 14,76,056.54 |
| 13 | Brick work with modular bricks of class designation 7.5 in foundation and plinth in : - Cement Mortar 1:6 (1 cement : 6 fine sand). (USSOR-2011 Item No. 051023) | cum | 40.00 | 2,626.86 | 1,05,074.4 |
| 14 | Extra over item 051010 & 051020 for brick work in superstructure beyond plinth level upto floor two level. (USSOR-2011 Item No. 051040) | cum | 25.00 | 196.8 | 4,920 |
| 15 | Brickwork with clay fly ash FPS bricks of class designation 75 in superstructure above plinth level upto floor two level. In: Cement mortar 1:6 (1 cement: 6 fine sand). (USSOR- 2011 Item No. 055074) | cum | 200.00 | 2,669.06 | 5,33,812 |
| 16 | Providing wood work in frames of doors, windows, clerestory windows and other frames and trusses, wrought, framed and fixed in position :Second class teak wood. (USSOR-2011 Item No. 071011) | cudm | 1000.00 | 64.76 | 64,760 |
| 17 | Providing and fixing to IS: 2202 Part-1 marked flush door shutter decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters - 30 mm thick including ISI marked stainless steel butt hinges with necessary screws. (USSOR-2011 Item No. 072142) | Sqm | 21.00 | 1,498.31 | 31,464.51 |
| 18 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete - Fixed to steel windows by welding. (USSOR-2011 Item No.074231) | Kg | 1000.00 | 94.79 | 94,790 |
| 19 | Providing and fixing ISI marked aluminium butt hinges ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete - 100 x 75 x 4 mm. (USSOR-2011 Item No. 078013) | Each | 60.00 | 80.77 | 4,846.2 |
| 20 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete - 250 x 16 mm. (USSOR-2011 Item No. 078022) | Each | 60.00 | 197.38 | 11,842.8 |
| 21 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete - 200 x 10 mm. (USSOR-2011 Item No. 078033) | Each | 30.00 | 76.08 | 2,282.4 |
| 22 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete - 150 x 10 mm. (USSOR-2011 Item No. 078034) | Each | 20.00 | 62.31 | 1,246.2 |
| 23 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete - 125 mm. (USSOR-2011 Item No. 078061) | Each | 20.00 | 70.66 | 1,413.2 |
| 24 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete - 100 mm. (USSOR-2011 Item No. 078062) | Each | 20.00 | 51.32 | 1,026.4 |
| 25 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete - Twin rubber stopper. (USSOR- 2011 Item No. 078072) | Each | 30.00 | 59.88 | 1,796.4 |
| 26 | "Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitered at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size complete as per manufacturers specification and direction of Engineer-in-Charge". (USSOR- 2011 Item No. 078130) | Metre | 100.00 | 393.89 | 39,389 |
| 27 | Providing and fixing to existing door frames 30 mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15 x 15 mm for top & bottom rails. M.S .frame shall have a coat of steel primers. M.S. frame covered with 5 mm thick heat moulded PVC Foam sheet 'C channel as per drawing given in IR Standard Specifications complete in all respect. (USSOR-2011 Item No. 078140) | Sqm | 35.00 | 2,358.54 | 82,548.9 |
| 28 | Structural steel work welded in built up sections, trusses and framed work, girders, stagings, racks, etc including cutting, bending, straightening, hoisting, fixing in position, including applying a priming coat of approved steel primer, complete - upto 6 m height above GL - In RSJ, tees, angles and channels. (USSOR-2011 Item No. 081031) | Kg | 5000.00 | 73.3 | 3,66,500 |
| 29 | Structural steel work welded in built up sections, trusses and framed work, girders, stagings, racks, etc including cutting, bending, straightening, hoisting, fixing in position, including applying a priming coat of approved steel primer, complete - upto 6 m height above GL - In flats, plates , round or square bars. (USSOR-2011 Item No. 081032) | Kg | 2500.00 | 73.46 | 1,83,650 |
| 30 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete - Hot finished welded type tubes. (USSOR-2011 Item No. 081291) | Kg | 5000.00 | 90.81 | 4,54,050 |
| 31 | Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285, anodised transparent or dyed to required shade according to IS:1868 (Minimum anodic coating of grade AC 15 fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing/ panelling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing and panelling to be paid for separately) - For fixed portion. (USSOR-2011 Item No. 082011) | Kg | 200.00 | 298.11 | 59,622 |
| 32 | Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285, anodised transparent or dyed to required shade according to IS:1868 (Minimum anodic coating of grade AC 15 fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing/ panelling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing and panelling to be paid for separately) - For openable/sliding portions and fixing hinges / pivots, PVC/ neoprene gasket requiredand making provision for fixing of fittings. (Fittings shall be paid for separately). (USSOR-2011 Item No. 082012) | Kg | 180.00 | 311.73 | 56,111.4 |
| 33 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge. (Cost of aluminium snap beading shall be paid in basic item) - With float/frosted glass panes of 4 mm thickness (weight not less than 10.0 kg/sqm). (USSOR- 2011 Item No. 082031) | Sqm | 30.00 | 707.6 | 21,228 |
| 34 | "Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge. (Cost of aluminium snap beading shall be paid in basic item) - With float/frosted glass panes of 5.5 mm thickness (weight not less than 13.75 kg/sqm)". (USSOR-2011 Item No. 082032) | Sqm | 20.00 | 886.47 | 17,729.4 |
| 35 | Providing and fixing Aluminium round/ square bars / flats or grill in frame of windows and cleastory windows. (USSOR- 2011 Item No. 083020) | Sqm | 20.00 | 553.29 | 11,065.8 |
| 36 | Fabricating, supplying & installing stainless steel railings for staircases, balconies, FOBs, Enquiry/Reservation complex etc., made of SS 304 grade stainless steel, laser cut / water jet cut (no shearing), polished with Automatic round/flat polishing machine to get a uniform hairline finish. All parts shall be connected to each other with the help of prescribed size CNC made solid connectors, countersunk screws. Welding should be finished ensuring that no welding marks are visible and assembly is mounted on floor with the help of dash fasteners. Railings shall be fabricated as per approved drawings by engineer-in-charge. Manufacturer shall submit maintenance manual and basic material test report for grade certification. (USSOR-2011 Item No. 083050) | Kg | 500.00 | 258.64 | 1,29,320 |
| 37 | Laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) of thickness 40 to 100 mm as under layer of flooring. (USSOR-2011 Item No. 091090) | cum | 50.00 | 2,748.12 | 1,37,406 |
| 38 | Providing & fixing Precast Chequered tiles conforming to IS:13801:1993, manufactured under mechanical vibration & hydraulic pressing machine in double layer; top layer of 10 to 12 mm thickness of Dolomite Powder, graded chips, fibre and UV stabilised iron oxide Lanexess colour and bottom layer of 1:3 CC mixed with galvanised steel fibre of approved quality, jointed with neat cement slurry mixed with pigment to match shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 of sizes : - 300 mm x 300 mm x 30 mm thick. (USSOR-2011 Item No. 094062) | Sqm | 100.00 | 561.58 | 56,158 |
| 39 | Providing and fixing Ist quality ceramic tiles conforming to Group B-III (Ceramic Wall Tiles) of IS:15622 of manufacturers approved by railway in all colours, shades, and design as approved by the Engineer-in- Charge in skirting, risers of steps and dado over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) including pointing in white cement mixed with pigment of matching shade complete - 300 x 450 mm and above. (USSOR-2011 Item No. 095013) | Sqm | 200.00 | 555.26 | 1,11,052 |
| 40 | Providing and fixing ceramic tiles conforming to IS:15622 of manufacturers approved by railway in all colours, shades, design and abrasion resistance class as approved by the Engineer-in-Charge in floors and landings over 20 mm thick bed of cement mortar 1:4 (1 cement: 3 coarse sand) including pointing in white cement mixed with pigment of matching shade complete - Of Group B-I-b of IS : 15622 (Ceramic Tiles) of size 200 x 200 mm to 400 x 400 mm. (USSOR-2011 Item No. 095023) | Sqm | 100.00 | 670.24 | 67,024 |
| 41 | Providing and fixing ceramic tiles conforming to IS:15622 of manufacturers approved by railway in all colours, shades, design and abrasion resistance class as approved by the Engineer-in-Charge in floors and landings over 20 mm thick bed of cement mortar 1:4 (1 cement: 3 coarse sand) including pointing in white cement mixed with pigment of matching shade complete - Of Group B-I-a of IS : 15622 (Vitrified tiles) of size above 400 x 400 mm up to 600 x 600 mm. (USSOR-2011 Item No. 095026) | Sqm | 500.00 | 1,005.5 | 5,02,750 |
| 42 | Providing and fixing ceramic tiles conforming to IS:15622 of manufacturers approved by railway in all colours, shades, design and abrasion resistance class as approved by the Engineer-in-Charge in floors and landings over 20 mm thick bed of cement mortar 1:4 (1 cement: 3 coarse sand) including pointing in white cement mixed with pigment of matching shade complete - Of Group B-I-a of IS : 15622 (Vitrified tiles) of size 800 x 800 mm and above. (USSOR-2011 Item No.095027) | Sqm | 300.00 | 1,455.57 | 4,36,671 |
| 43 | Kota stone slab flooring of size up to 60 x 60 cm over 20 mm (average) thick base of 1:4 cement mortar (1 cement: 4 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete - 25 mm thick. (USSOR-2011 Item No. 096072) | Sqm | 100.00 | 913.65 | 91,365 |
| 44 | Providing and laying vitrified ceramic paver tiles conforming to Group B-II, Clause 5.1 (for abrasion resistance) of IS : 15622 of manufacturers approved by railway in all colours, shades and design as approved by the Engineer-in-Charge in floors and landings over 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing with polymer based grout of matching shade complete of size : - 300 x 300 x 15 mm. (USSOR-2011 Item No. 098083) | Sqm | 100.00 | 1,390.51 | 1,39,051 |
| 45 | Laying 80 mm thick over sized stone ballast 75 mm to 100 mm gauge in soling of floors, hand packed including hand packing, filling voids with sand and watering, ramming and leveling. (USSOR-2011 Item No. 098090) | Sqm | 500.00 | 129.34 | 64,670 |
| 46 | Providing and fixing 18 mm thick mirror polished, machine cut for kitchen platforms, vanity counters facias, dados and skirtings and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touchups, including rubbing, curing. etc. complete at all levels - Granite Black. Area of slab up to 0.10 Sqm. (USSOR- 2011 Item No. 099031) | Sqm | 10.00 | 2,082.44 | 20,824.4 |
| 47 | Providing and fixing 18 mm thick mirror polished, machine cut for kitchen platforms, vanity counters facias, dados and skirtings and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing. etc. complete at all levels - Granite Black. Area of slab 0.10 Sqm to 0.2 Sqm. (USSOR-2011 Item No. 099032) | Sqm | 15.00 | 1,960.09 | 29,401.35 |
| 48 | Providing and fixing 18mm thick mirror polished, machine cut for kitchen platforms, vanity counters facias, dados and skirtings and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touchups, including rubbing, curing. etc. complete at all levels - Granite Black. Area of slab over 0.2 Sqm but up to 0.5 Sqm. (USSOR-2011 Item No. 099033) | Sqm | 50.00 | 2,500.17 | 1,25,008.5 |
| 49 | Providing and fixing 18mm thick mirror polished, machine cut for kitchen platforms, vanity counters facias, dados and skirtings and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touchups, including rubbing, curing. etc. complete at all levels - Granite Black. Area of slab over 0.5 Sqm but up to 1.0 Sqm. (USSOR-2011 Item No. 099034) | Sqm | 75.00 | 2,620.62 | 1,96,546.5 |
| 50 | Providing and fixing 18 mm thick mirror polished, machine cut for kitchen platforms, vanity counters facias, dados and skirtings and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touchups, including rubbing, curing. etc. complete at all levels - Granite Black. Area of slab over 1.0 Sqm but up to 2.0 Sqm or larger. (USSOR-2011 Item No. 099035) | Sqm | 100.00 | 2,785.14 | 2,78,514 |
| 51 | Providing and fixing 18mm thick mirror polished, machine cut for kitchen platforms, vanity counters facias, dados and skirtings and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touchups, including rubbing, curing. etc .complete at all levels - Granite Pink/Grey. Area of slab up to 0.10 Sqm. (USSOR-2011 Item No. 099041) | Sqm | 10.00 | 2,082.44 | 20,824.4 |
| 52 | Providing and fixing 18 mm thick mirror polished, machine cut for kitchen platforms, vanity counters facias, dados and skirtings and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touchups, including rubbing, curing. etc .complete at all levels - Granite Pink/Grey. Area of slab 0.10 Sqm to 0.2 Sqm. (USSOR-2011 Item No. 099042) | Sqm | 10.00 | 2,204 | 22,040 |
| 53 | "Providing and fixing 18 mm thick mirror polished, machine cut for kitchen platforms, vanity counters facias, dados and skirtings and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touchups, including rubbing, curing. etc .complete at all levels - Granite Pink. Area of slab over 0.2 Sqm but upto 0.5 Sqm". (USSOR-2011 Item No. 099043) | Sqm | 25.00 | 2,683.11 | 67,077.75 |
| 54 | Providing and fixing 18 mm thick mirror polished, machine cut for kitchen platforms, vanity counters facias, dados and skirtings and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touchups, including rubbing, curing. etc .complete at all levels - Granite Pink. Area of slab over 0.5 Sqm but up to 1.0 Sqm. (USSOR-2011 Item No. 099044) | Sqm | 125.00 | 2,760.87 | 3,45,108.75 |
| 55 | Providing and fixing 18 mm thick mirror polished, machine cut for kitchen platforms, vanity counters facias, dados and skirtings and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touchups, including rubbing, curing. etc .complete at all levels - Granite Pink. Area of slab over 1.0 Sqm but upto 2.0 Sqm Or larger. (USSOR-2011 Item No. 099045) | Sqm | 150.00 | 2,968.08 | 4,45,212 |
| 56 | Extra for providing edge moulding to 16 mm to 20 mm thick marble/granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by the Engineer-in-Charge - Granite work. (USSOR- 2011 Item No. 099062) | Metre | 1000.00 | 146.47 | 1,46,470 |
| 57 | Providing & fixing PVC multiple hollow section of approved colour with tongue and groove fixture having wall thickness 1 mm and overall thickness 12 mm in ceiling on existing frame work. (USSOR-2011 Item No. 106080) | Sqm | 100.00 | 314.29 | 31,429 |
| 58 | Providing and fixing at all height false ceiling of 12.5mm thick tapered edge gypsum board conforming to IS: 2095-Part I, including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised with zinc coating of grade 350 as per IS: 277 and consisting of angle cleats of size 25mm x 1.6mm with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with stener 12.5mm dia x 40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm dia x 230mm long G.I. wire at every junction includingfixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the gypsum board with recommended filler, paper tapes, finisher and two coats of primer suitable for gypsum board as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer- in-Charge but excluding the cost of painting. (USSOR-2011 Item No. 106100) | Sqm | 500.00 | 741.17 | 3,70,585 |
| 59 | Extra for any sunk or raised Moulding in the Plaster of Paris (gypsum anhydrous) ceiling. (USSOR-2011 Item No. 106120) | Sqm | 50.00 | 184.04 | 9,202 |
| 60 | Providing & fixing pressed clay tile (Mangalore tile) 20 mm nominal thickness and of approved size and as per approved pattern ceiling on steel frame work complete (steel frame work to be paid separately). (USSOR-2011 Item No. 107120) | Sqm | 100.00 | 306.68 | 30,668 |
| 61 | Providing & laying pressed clay tile ridge (Mangalore tile) of 20 mm thickness of approved pattern ceiling over steel frame work complete (steel frame work to be paid separately). (USSOR-2011 Item No. 107130) | Sqm | 50.00 | 82.33 | 4,116.5 |
| 62 | Providing and fixing on wall face unplasticised - Rigid PVC single socketed rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. - 110 mm dia. (USSOR-2011 Item No.108162) | Metre | 112.00 | 235.24 | 26,346.88 |
| 63 | 15 mm cement plaster on the rough side of single or half brick wall of mix -1:4 (1 cement: 4 fine sand). (USSOR-2011 Item No. 111021) | Sqm | 1500.00 | 101.81 | 1,52,715 |
| 64 | Cement plaster to ceiling of mix - 12 mm thick 1:3 (1 cement: 3 fine sand). (USSOR- 2011 Item No. 111152) | Sqm | 350.00 | 92.51 | 32,378.5 |
| 65 | Providing and applying plaster of Paris putty of 2 mm average thickness over plastered surface to prepare the surface even and smooth complete. (USSOR-2011 Item No. 112040) | Sqm | 1500.00 | 76.18 | 1,14,270 |
| 66 | Applying one coat of cement primer of approved brand and manufacture on wall surface. (USSOR-2011 Item No. 115060) | Sqm | 1500.00 | 26.79 | 40,185 |
| 67 | Wall painting on new work with two or more coats of plastic emulsion paint of approved brand and manufacture to give an even shade (USSOR-2011 Item No. 115060) | Sqm | 1500.00 | 56.67 | 85,005 |
| 68 | Applying Priming Coat : With ready mixed pink or grey primer of approved brand and manufacture on woodwork (hard and soft wood). (USSOR-2011 Item No. 121011) | Sqm | 50.00 | 21.95 | 1,097.5 |
| 69 | Painting two coats (excluding priming coat) with chocolate, red, grey or buff ready mixed paint of approved quality, on steel or wood work. (USSOR-2011 Item No. 121150) | Sqm | 100.00 | 41.62 | 4,162 |
| 70 | Providing and fixing medium grade G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the wall etc. Concealed pipe including painting with anti corrosive bitumestic paint, cutting chase and making good the wall - 15 mm dia. nominal bore. (USSOR-2011 Item No. 131141) | Metre | 100.00 | 197.52 | 19,752 |
| 71 | Providing and fixing medium grade G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the wall etc. Concealed pipe including painting with anti corrosive bitumestic paint, cutting chase and making good the wall - 25 mm dia. nominal bore. (USSOR-2011 Item No. 131143) | Metre | 50.00 | 277.67 | 13,883.5 |
| 72 | Providing and fixing medium grade G.I. pipes complete with G.I. fittings including trenching and refilling etc. External Work - 25 mm dia. nominal bore. (USSOR-2011 Item No. 131153) | Metre | 100.00 | 219.42 | 21,942 |
| 73 | Providing and fixing medium grade G.I. pipes complete with G.I. fittings including trenching and refilling etc. External Work - 50 mm dia. nominal bore.(USSOR-2011 Item No. 131156) | Metre | 200.00 | 370.12 | 74,024 |
| 74 | Providing and fixing medium grade G.I. pipes complete with G.I. fittings including trenching and refilling etc. External Work - 80 mm dia. nominal bore. (USSOR-2011 Item No. 131158) | Metre | 100.00 | 629.39 | 62,939 |
| 75 | Making connection of medium grade G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete - 50 to 80 mm nominal bore. (USSOR-2011 Item No. 131162) | Each | 2.00 | 517.27 | 1,034.54 |
| 76 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : - 150 mm diameter. (USSOR-2011 Item No. 132172) | Each | 10.00 | 354.84 | 3,548.4 |
| 77 | Providing and fixing C.P. brass bib cock, 15mm nominal bore, of approved quality conforming to IS:8931.(USSOR-2011 Item No. 132180) | Each | 20.00 | 237.58 | 4,751.6 |
| 78 | Providing and fixing C.P. brass stop cock, 15 mm nominal bore, (concealed) of standard design and of approved make conforming to IS:8931. (USSOR-2011 Item No. 132210) | Each | 20.00 | 268.97 | 5,379.4 |
| 79 | Providing and placing on terrace/staging (at all heights) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (USSOR-2011 Item No. 136150) | Litre | 15000.00 | 4.98 | 74,700 |
| 80 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes including bends etc with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement: 2fine sand) including testing of joints etc. complete upto 800mm dia.- 150mm dia. R.C.C. pipe. (USSOR-2011 Item No. 142012) | Metre | 50.00 | 293.88 | 14,694 |
| 81 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes including bends etc with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement: 2fine sand) including testing of joints etc. complete upto 800mm dia.- 300mm dia. R.C.C. pipe. (USSOR-2011 Item No. 142014) | Metre | 200.00 | 484.47 | 96,894 |
| 82 | "Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required- White Vitreous China Orissa pattern W.C. pan of size 580x440-mm with integral type foot rests". (USSOR-2011 Item No. 151011) | Each | 10.00 | 3,438.5 | 34,385 |
| 83 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10litre low level white, P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required- W.C. pan with ISI marked black solid plastic seat and lid. (USSOR-2011 Item No. 151022) | Each | 4.00 | 2,947.89 | 11,791.56 |
| 84 | "Providing and fixing white, vitreous china flat back half stall urinal of 580x380x350mm with white P.V.C. automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.I. trap with outlet grating and other coupling in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required- Single half stall urinal with 5litre P.V.C. automatic flushing cistern". (USSOR-2011 Item No. 151051) | Each | 2.00 | 5,815.94 | 11,631.88 |
| 85 | "Providing and fixing white, vitreous china flat back half stall urinal of 580x380x350mm with white P.V.C. automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.I. trap with outlet grating and other coupling in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required- Range of two half stall urinals with 5litre P.V.C. automatic flushing cistern". (USSOR-2011 Item No. 151052) | Each | 1.00 | 9,120.41 | 9,120.41 |
| 86 | Providing and fixing wash basin with C.I./ M.S. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required- white vitreous china flat back wash basin size 550x400mm with single 15mm C.P. brass pillar tap. (USSOR-2011 Item No. 151074) | Each | 10.00 | 1,524.49 | 15,244.9 |
| 87 | Providing and fixing white, vitreous china squatting plate urinal with integral longitudinal flush pipe. (USSOR-2011 Item No. 151270) | Each | 4.00 | 1,441.89 | 5,767.56 |
| 88 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete - Semi rigid pipe 32mm dia. (USSOR-2011 Item No. 152081) | Each | 10.00 | 49.99 | 499.9 |
| 89 | Providing and fixing C P brass Soap dish holder having length of 138 mm, 102 mm wide, 75 mm high with concealed fittings arrangements weighing approx. 110 gms. (USSOR-2011 Item No. 153380) | Each | 6.00 | 167.09 | 1,002.54 |
| 90 | Providing and fixing Towel rail (C.P.)brass15 mm dia x 600 mm long having approx. wt.500 gm. (USSOR-2011 Item No. 153410) | Each | 6.00 | 355.56 | 2,133.36 |
| 91 | Providing and fixing C P brass Bottle trap 31 mm, single piece moulded of ht. 270 mm, effective length of tall pipe from centre of waste coupling 260 mm, 77 mm breadth water seal of minimum 25 mm, weighing approx. 260 gms. (USSOR-2011 Item No. 153440) | Each | 10.00 | 398.03 | 3,980.3 |
| 92 | Providing and fixing C P Brass :- Grating 150 mm. nominal size square ,18 mm high with 100 mm dia. of the inner hinged round grating dome shape having Total wt. not less than 110 gms. (USSOR-2011 Item No. 153481) | Each | 10.00 | 164.7 | 1,647 |
| 93 | Providing and fixing Swan neck pillar tap (C.P. Brass) 15 mm dia. with swinging spout having approx. wt. 1000 gms. (USSOR-2011 Item No. 153500) | Each | 10.00 | 442.3 | 4,423 |
| 94 | Providing and fixing 110mm dia PVC soil, waste and vent pipes including jointing and cost of spun yarn and sand etc. complete. (USSOR-2011 Item No. 154010) | Metre | 50.00 | 274.84 | 13,742 |
| 95 | Providing and fixing 75 mm PVC soil, waste and vent pipes including jointing and cost of spun yarn and sand etc., complete. (USSOR- 2011 Item No. 154140) | Metre | 30.00 | 187.86 | 5,635.8 |
| 96 | Demolishing plain cement concrete including disposal of material within 50m lead - 1:2:4 or richer mix with max. 20 mm coarse aggregate. (USSOR-2011 Item No. 181021) | cum | 10.00 | 606.59 | 6,065.9 |
| 97 | Demolishing R.C.C. work including cutting and stacking of steel bars and disposal of unserviceable material within 50m lead. (Extra payment for scraping, cleaning and straightening of bars to be made separately). (USSOR-2011 Item No. 181030) | cum | 10.00 | 884.95 | 8,849.5 |
| 98 | Extra over Item Nos. 181021 and 181050 if pavement breaker is used on orders of Engineer. (USSOR-2011 Item No. 181040) | cum | 10.00 | 265.48 | 2,654.8 |
| 99 | Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50m lead - In cement mortar. (USSOR-2011 Item No. 182013) | cum | 20.00 | 512.81 | 10,256.2 |
| 100 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster/pointing including disposal of rubbish within 50m lead. (USSOR-2011 Item No. 182070) | Sqm | 100.00 | 13.63 | 1,363 |
| 101 | Dismantling tile work in floors/dado/skirting laid in cement mortar/ chemical mortar/synthetic adhesive including stacking material within 50m lead. (USSOR-2011 Item No. 183020) | Sqm | 50.00 | 28.24 | 1,412 |
| 102 | Taking out doors, windows, clerestory window, cupboard shutters only (steel or wood) including stacking within 50m lead. (USSOR-2011 Item No. 185020) | Each | 20.00 | 47.24 | 944.8 |
| 103 | Filling contractor's moorum/good quality granular material as specified in Railway Specification without stacking directly in plinths and floors, etc, complete including watering and ramming (Item no 01505 of SOR- 2002. (USSOR-2011 Item No. 271020) | cum | 200.00 | 628.79 | 1,25,758 |
| 104 | Cement concrete 1:2:4 in foundation with 25 mm graded stone aggregate excluding cost of cement , shuttering $ centering ..(Item no 02102 of SOR-2002). (USSOR-2011 Item No. 271030) | cum | 25.00 | 2,631.48 | 65,787 |
| 105 | Cement concrete 1:2:4 with 20 mm graded stone aggregate for all works in sub- structure & superstructures centering..(Item no 2103 of SOR-2002). (USSOR-2011 Item No. 271040) | cum | 40.00 | 2,344.31 | 93,772.4 |
| 106 | Cement concrete 1:2:4 with 20 mm graded stone aggregate for all works in sub- structure & superstructures centering..(Item no 2103 of SOR-2002). (USSOR-2011 Item No. 271040) | cum | 10.00 | 2,344.31 | 23,443.1 |
| 107 | Reinforced cement concrete 1:1.5:3 with 20 mm graded stone aggregate excluding cost of cement, shuttering & centering. (Item no 2205 a of SOR-2002) - (a) in foundation excluding cost of cement. (USSOR-2011 Item No. 271051) | cum | 10.00 | 2,267.26 | 22,672.6 |
| 108 | Reinforced cement concrete 1:1.5:3 with 20 mm graded stone aggregate excluding cost of cement, shuttering & centering. (Item no 2205 a of SOR-2002) - (b) in column , Lintel, Beam etc. (USSOR-2011 Item No. 271052) | cum | 20.00 | 2,398.64 | 47,972.8 |
| 109 | Reinforced cement concrete 1:1.5:3 with 20 mm graded stone aggregate excluding cost of cement, shuttering & centering. (Item no 2205 a of SOR-2002) - (c) in walls ,floors, chhaja etc. (USSOR-2011 Item No. 271053) | cum | 10.00 | 2,530.03 | 25,300.3 |
| 110 | Providing & fixing PVC Nahani trap 100mm and with PVC cover including making holes in walls, beams etc. and fixing with utmost care to avoid leakage. The rate includes testing the trap & flow junction joints etc. for water tightness & making good and finishing the damaged portion but exclude cost of cement (Item no. 17406 of SOR-20002) - (a) 100 mm dia. (USSOR-2011 Item No. 274061) | Each | 10.00 | 436.16 | 4,361.6 |
| 111 | Providing & fixing PVC Nahani trap 100mm and with PVC cover including making holes in walls, beams etc. and fixing with utmost care to avoid leakage. The rate includes testing the trap & flow junction joints etc. for water tightness & making good and finishing the damaged portion but exclude cost of cement (Item no. 17406 of SOR-20002) - (b) 75 mm dia. (USSOR-2011 Item No. 274062) | Each | 6.00 | 406.16 | 2,436.96 |
| 112 | Removing stacked and demarcated muck, debris etc. from various locations in Railway colonies, station areas etc. and disposing off the same beyond Railway land as per the local corporation/council rules. The rate includes all lead, lift etc. complete and leveling the area after removal. (Item no 23202 of SOR - 2002). (USSOR-2011 Item No. 274100) | cum | 150.00 | 126.7 | 19,005 |
| 113 | Providing and fixing informatory sign boards of required shape, size and design made out of 3 mm thick aluminum sheet bonded with approved colour retro-reflective sheeting including all letters, wordings, designs, graphics, messages etc. made out of computerized design screen printing on retro-reflective sheeting. The retro-reflective sheeting shall be of high intensity grade, having pressure sensitive/heat activated adhesive. The rate includes fixing at different locations with nuts, bolts, screws etc. but excludes brackets, stands etc. which shall be paid separately. (Item no 23304 of SOR-2002). (USSOR-2011 Item No. 274130) | cum | 25.00 | 3,592.08 | 89,802 |
| 114 | Providing and fixing Netlon or equivalent type extruded mosquito proof netting properly cut to the size and stiched with Nylon thread and squarely fixed with 20mm retrohood and loop fastening system for removal and refixing complete and as directed by Engineer-In-Charge.(Prior permission of DEN/Sr.DEN/Dy.CE is necessary). (Item no 23319 of SOR-2002). (USSOR-2011 Item No. 274190) | cum | 20.00 | 496.81 | 9,936.2 |
| Schedule total | ₹1,07,64,827.02 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender Document
ATTACHMENT
20-2026-01SEGM-Prov.ofwaitingroomProv.ofCOPetc.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .