CA NO. GE (P) AF/GUR-53/2020-21 REPAIR/MAINT OF EXTERNAL ELECTRIC, STREET LIGHT, SECURITY LIGHT AND OTHER CONNECTED WORKS IN 13 BRD and 16 BRD AT AF STN PALAM UNDER GE (P) AF GURGAON

Amount

Excavation in trenches in soft/loose soil not exceeding 1.50 Mtrs wide and not exc. 1.5 Mtr deep and getting out for taking out/laying cable, poles &stay etc complete all as specified and as directed by Engr-in-Charge.

Demoliton of Concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed by Engineer-in-charge.

Returning, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid tested complete all as specified and as directed by Engineer-in-Charge.

Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed by Engr-in-charge.

M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable and punned down to 18cm, complete all as specified and as directed by Engr-in-charge.

M&L for brick laid in trenches for cable protection of burnt clay sub class ‘B’ complete laid dry flat, complete all as specified and as directed by Engr-in-charge.

Laying old serviceable bricks (retrieved under item 01 of Sch ‘A’, complete all as specified and as directed by Engr-in-charge.

M&L for PCC 1:2:4 type B2 using 40mm grade stone aggregate as in copping of electric pole or making good of disturbed surface including form work complete all as specified and as directed by Engineer-in-charge.

M&L complete for driling hole hard standing / road for laying of pipe for protection of cable etc by means of manual booklet and without disturbing the top surface or cutting and making good the disturbed surface to the existing if any complete all as specified and directed by Engineer-in-charge.

Supply and laying GI tube light grade 40 mm bore complete all as specified and directed by Engr-in-charge. Make - Bansal/Jindal/ITC.

Supply and lay or fixing or passing through pipe cable XLPE (FRLS) with aluminium conductor with heavy duty stranded,1100 volts size of 16 Sqmm 2 Core including taking out old U/S cable complete all as specified and as directed. Note :- XLPE insulated pvc sheathing (heavy duty) armoured cable with aluminium conductor for working pressure up to and including 1100 volts to IS -7098 (Part-I) for pvc insulated cables with following :- (a) Cable shall have fire retardate low smoke (FRLS) compound added to it in the inner sheathing and out sheathing as per IEC 754 (part-I) IEC-60332 part-2 IFEE 383 ASTM 2x43 and ASTM 2X63 flame retardate compound (PR) as per EIC specification. (b) Inner sheathing shall be of extruded PVC. (c)Heat resisting PVC shall also be added to extruded inner and outer sheathing. (d) Cable shall also be supplied with sequences hal marking at every meter as the outer sheathing. (e) ultra violet radiation resistances compounded comprising ton ASTMG-53. (f) anti rodent and antitermite compound added. (g) pvc compounds of various grades as IS-5831. (h) compaction conductors shall be shaped and arrangement for the same with be on the cable

All as per item No. 11 but size 16 Sqmm, 4 Core .

S&F time switch type Alpharex3 D 21 astro, complete all as specified and directed by Engr-in-Charge. Make : Legrand Cat Part No.412654 or equivalent in Siemens/L&T

Supply and fixing in replacement 40 amps TP power contactor, complete all as specified and directed by Engr-in-Charge. Make - Legrand Cat Part No-412549 or equivalent in Siemens/L&T)

Supply and fixing in replacement 32 amps TPN MCB, complete all as specified and directed by Engr-in-Charge. Make - Legrand/Siemens/Schneider

Supply and fixing MCB SP 10 to 32 amps, complete all as specified and directed by Engr-in-Charge. Make : Legrand/Siemens/schiender

S&F 2.5 Sqmm two core stranded PVC insulated copper conductor FR cable for connection of fittings, complete all as specified and directed by Engr-in-Charge. Make: Plaza/Havells

Taking down existing old street light panel /feeder box comprising of MCCB & switch fuse unit of any capacity and size including bus bar, ammeters, voltmeters etc after disconnecting all cable connection and removing from site complete all as directed.

S&F street light panel /feeder box made out of MS/CRCA sheet 3.15mm thick with MS angle iron frame of size 40x40x6mm out door type front door opening with locking arrangement slinting roof and size of panel/feeder pillar box is 0.6mx0.45 and 0.35 m with out legs including necessary pcc cutting and fixing with pcc 1:3:6 of size 0.3mx0.3mx0.2m for 04 nos legs including necessary insulators and 04 nos copper bus bar of size 30mmx5mm capacity, provn of inlet and outlet cables with glands and earth connecting lead etc complete and connection of all incoming and out going cable using aluminium terminal sockets/lugs duly crimpled and necessary two coats of paints with approved colour and grade of first quality synthetic enameled paint over a coat of red oxide primer including necessary preparation of surfaces all specified and testing complete including the following :- (i) S&F MCCB 4 pole 415 volts 125 amps 16 KA - 01 No. Make Legrand /Siemens/schiender (ii)S&Fmodular indicator lamp LED type -1 set (R,Y,B). (iii)S&F time switch type Alpharex3 D -21 astro Legrand CAT No 412654 =01 No (iv)Supply and fixing 40 amps TP power contactor Make -Legrand Cat No-412549 =01 No (v)Supply and fixing 32 amps TPN MCB Make - Legrand/Siemens/schiender =01 No (vi)Supply and fixing 6-32 amps sp MCB Make - Legrand/Siemens/schiender =06 Nos (vii)Supply and fixing single phase preventer Make -L&T=01 No

Supply and fixing LED street light fitting of capacity 60 watts ,cool white complete with drivers and all accessories and making all necessary connection including taking out of old unserviceable one, complete all as specified and directed by Engineer-in-Charge. Make : Havells/Bajaj/PHILIPS

Supply and fixing LED street light fitting of capacity 90 watts ,cool white complete with drivers and all accessories and making all necessary connection including taking out of old unserviceable one, complete all as specified and directed by Engineer-in-Charge. Make : Havells/Bajaj/PHILIPS

Supply and fixing 150 watt energy , saving environmental friendly, long life exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural features or retail spaces, including taking out of old unserviceable one, complete all as specified and directed by Engineer-in-Charge. Make : Havells/Bajaj/PHILIPS

Supply and fix replacement of Highly efficient high power LED flood light without lens , pressure die cast aluminium housing, reflector and enclosed with toughened glass Capacity 200 Watt . IP 66, complete all as specified and as directed by Engr-in-charge. Make : Havells/PHILIPS/Bajaj

Supply and fixing replacement of LED flood light of capacity 300 watts ,cool white complete with drivers and all accessories and making all necessary connection including taking out of old unserviceable one, complete all as specified and directed by Engineer-in-Charge. Make :Havells/PHILIPS/Bajaj

Supply and fixing 9 watts LED bollards square shape, integral decorative with opal acrylic with IP 65 protection light fitting including necessary connections and taking out of old unserviceable one., complete all as specified and directed by Engineer-in-Charge. Make - Bajaj / Philips /Havells

Supply and fixing LED post light 45 watt made in die cast aluminium body and with clear toughened glass diffuser and IP -65 Protection complete including necessary connection complete all as specified and directed by Engineer-in-Charge, Make : Havells/Bajaj/PHILIPS

Supply and fixing LED post top light 40 watt made in cast aluminium spigot housing with decorative clear opal acrylic diffuser and IP -65 Protection including necessary connection complete all as specified and directed by Engineer-in-Charge. Make : Havells/Bajaj/PHILIPS

S&F in replacement of driver for LED light fitting of capacity 60W to 90W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. Make : Havells/Bajaj/PHILIPS

S&F in replacement of driver for LED light fitting of capacity 120W to 150W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. Make : Havells/Bajaj/PHILIPS

S&F in replacement of driver for LED light fitting of capacity 40 to 45W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. Make : Havells/Bajaj/PHILIPS

M&L for Preparation of old painted exposed surface of steel tubular LT poles 9 mtr long with street light brackets etc complete, painting and numbering of poles with existing size and type as under:- (i)from bottom up to 1.2 mtr height one coat of black synthetic enamel high glow paint make berger (ii) 1.2mtr to 1.30mtr height one coat of red & blue luminous paint/tape. (iii)1.30 mtr height to top of the pole two coats of aluminium paint.

Supply & Fix Street Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (9.0 metres long) complete with foundation all as specified and as directed by Engineer-in-charge.

Notes:- (a) The amount of Rs. 50,550/- against Schedule of Credit on Page No. 109 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

PARKASH ENTERPRISES

Bluemax Associate

Ridhi engineers and builders

JAIPAL AND BROTHERS

New Era Engineers

H.B. Traders