Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.9 LAdmitted-Finance 20 JAIN BAZAR JAMMU 180003 J K | JAMMU | JAMMU | J K | 180003 | ₹34.9 L | L1 | Admitted-Finance |
| 2 | L2₹43.8 L+₹8.9 L (25.5%)Admitted-Finance | ₹43.8 L+₹8.9 L (25.5%) | L2 | Admitted-Finance |
| 3 | L3₹43.8 L+₹8.9 L (25.6%)Admitted-Finance WARD NO 1 HOUSE NO 04 SUBASH NAGAR UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | ₹43.8 L+₹8.9 L (25.6%) | L3 | Admitted-Finance |
| 4 | L4₹43.9 L+₹9.1 L (26.0%)Admitted-Finance 13 P N DOGRA MARKET GOLE MARKET UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | ₹43.9 L+₹9.1 L (26.0%) | L4 | Admitted-Finance |
| 5 | L5₹44.5 L+₹9.6 L (27.6%)Admitted-Finance GROUND FLOOR MH ROAD UDHAMPUR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | ₹44.5 L+₹9.6 L (27.6%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | PAUL TRADERS L2 | VARDHMAN INTERNATIONAL L4 | slathia construction works L8 | MOHAN LAL AND SONS L9 | M/S DHARAM & SONS ENTERPRISES L5 | ATUL TRADING CO L7 | PROACH ASSOCIATES BUILDERS & ENGINEERS L6 | A K JAIN AND SONS L1 | DAVINDER SINGH L3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply, install, testing and commissioning in replacement of of wire mesh cable tray hot dip galvanised type of size of 105 mm height X 300 mm width, 3 meter length each as per EN 12329 and IEC 61537 with wire diameter of 3.9 to 5.9 mm and having SST of 550 Hrs tested, having E30/E90 certification, with following specification all as per directed by engr in charge
i) C41S/RCSN/R35 (wall/celling/ground mounting supports) every after 1 meter distance.
ii) Kitaster coupler (Jointimg tray) 5 sets per joint.
iii) Down rod of 1 meter length each.
iv) Nuts 3 nos for each rod
v) COUPFIL(Cutter) 01 No.
vi) L supports for wall with all accessories such as nut bolt washers etc.
Note:-
a) Shifting of all existing HT and LT cables, Removing connections of these cables and refixing at its original position through cable trays in a proper manner all as directed by engr in charge is included in the quoted rates.
b) All major and minor spares are required in laying of cables and fixing of cable trays which are not mention above are included in the quoted rates.
c) All meterial such as cement, concerete, tiles etc to make wall/roof /ground in its original shape after fixing of cable trays are included in the quoted rates | 150 | RM | 6,400 ₹9,60,000 | 3,300 ₹4,95,000 | 7,500 ₹11,25,000 | 8,000 ₹12,00,000 | 3,800 ₹5,70,000 | 8,550 ₹12,82,500 | 5,500 ₹8,25,000 | 4,000 ₹6,00,000 | 2,000 ₹3,00,000 Lowest |
| 2.00 | Supply, install, testing and commissioning in replacement of wire mesh cable tray hot dip galvanised type of size of 105 mm height X 400 mm width, 3 meter length each as per EN 12329 and IEC 61537 with wire diameter of 3.9 to 5.9 mm and having SST of 550 Hrs tested, having E30/E90 certification, with following specification all as per directed by engr in charge
i) C41S/RCSN/R35 (wall/celling/ground mounting supports) every after 1 meter distance.
ii) Kitaster coupler (Jointimg tray) 5 sets per joint.
iii) Down rod of 1 meter length each.
iv) Nuts 3 nos for each rod
v) COUPFIL(Cutter) 01 No.
vi) L supports for wall with all accessories such as nut bolt washers etc.
Note:-
a) Shifting of all existing HT and LT cables, Removing connections of these cables and refixing at its original position through cable trays in a proper manner all as directed by engr in charge is included in the quoted rates.
b) All major and minor spares are required in laying of cables and fixing of cable trays which are not mention above are included in the quoted rates.
c) All meterial such as cement, concerete, tiles etc to make wall/roof /ground in its original shape after fixing of cable trays are included in the quoted rates | 100 | RM | 6,900 ₹6,90,000 | 3,500 ₹3,50,000 | 7,500 ₹7,50,000 | 10,000 ₹10,00,000 | 4,300 ₹4,30,000 | 8,900 ₹8,90,000 | 5,500 ₹5,50,000 | 4,200 ₹4,20,000 | 2,500 ₹2,50,000 Lowest |
| 3.00 | Supply ,fabricating and fixing in repairs cross arms ( any type) supports, bracing, stiffeners anti climbing spikes, LT Panel Door, hinge with welding, Chequred Plates, MS Iron Angle frame made out of MS channel, angle iron, flat of any size including drilling of holes making clamps including eye hooks, nuts bolts and washers etc welding if required including painting with two coats of Synthetic Enameled paint (any shade as per site Requirement) over a coat of red oxide primer. | 2 | Qtl | 12,500 ₹25,000 | 9,500 ₹19,000 | 7,500 ₹15,000 Lowest | 12,000 ₹24,000 | 8,000 ₹16,000 | 11,500 ₹23,000 | 9,800 ₹19,600 | 8,000 ₹16,000 | 10,000 ₹20,000 |
| 4.00 | Supply and fixing PVC insulation tape red,yellow, blue colour 25 mm 25 mtr length tape Roll Lall, complete all as specified and directed by Engr-in-Charge. | 100 | Each | 15 ₹1,500 Lowest | 28 ₹2,800 | 55 ₹5,500 | 50 ₹5,000 | 50 ₹5,000 | 25 ₹2,500 | 90 ₹9,000 | 20 ₹2,000 | 85 ₹8,500 |
| 5.00 | S&F double walled corrugated (DWC) pipe of size 120 mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of LT cable in under ground/floor , complete all as specified and directed by Engr-in-Charge.
Make: REX/Tirupati Plastomatics Pvt Ltd | 100 | RM | 95 ₹9,500 Lowest | 150 ₹15,000 | 150 ₹15,000 | 150 ₹15,000 | 250 ₹25,000 | 188 ₹18,800 | 120 ₹12,000 | 150 ₹15,000 | 140 ₹14,000 |
| 6.00 | S&F double walled corrugated (DWC) pipe of size 77 mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of LT cable in under ground/floor, complete all as specified and directed by Engr-in-Charge.
Make: REX/Tirupati Plastomatics Pvt Ltd | 50 | RM | 90 ₹4,500 | 120 ₹6,000 | 90 ₹4,500 | 85 ₹4,250 Lowest | 200 ₹10,000 | 166 ₹8,300 | 88 ₹4,400 | 120 ₹6,000 | 110 ₹5,500 |
| 7.00 | S&F double walled corrugated (DWC) pipe of size 50 mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of LT cable in under ground/floor, complete all as specified and directed by Engr-in-Charge.
Make: REX/Tirupati Plastomatics Pvt Ltd | 50 | RM | 75 ₹3,750 | 110 ₹5,500 | 70 ₹3,500 | 50 ₹2,500 | 100 ₹5,000 | 49 ₹2,450 Lowest | 55 ₹2,750 | 100 ₹5,000 | 85 ₹4,250 |
| 8.00M&L for in replacement of copper thimble (Lugs) suitable for Cable of following sizes, complete all as specified and directed by Engr-in-Charge. | ||||||||||||
| 9.00 | Description all as per ser item No 8.00 here-in-before but size 70 sqmm to 95 Sqmm | 48 | Each | 80 ₹3,840 | 40 ₹1,920 Lowest | 70 ₹3,360 | 65 ₹3,120 | 215 ₹10,320 | 145 ₹6,960 | 90 ₹4,320 | 150 ₹7,200 | 60 ₹2,880 |
| 10.00 | Description all as per ser item No 8.00 here-in-before but size 120 Sqmm | 48 | Each | 95 ₹4,560 | 42 ₹2,016 Lowest | 150 ₹7,200 | 150 ₹7,200 | 320 ₹15,360 | 155 ₹7,440 | 130 ₹6,240 | 200 ₹9,600 | 75 ₹3,600 |
Tender Value
₹50.0 L
EMD Value
₹99,980
Closing Date
17 Jan 2026, 6:00 pmClosed
GE (Utilities) Udhampur
GE (Utilities) Udhampur Po-Garhi Pin-182121
Repair/Maint of switch gear, control panels and other allied works at Tawi, Garhi water supply installation under GE (Utilities) Udhampur
2025_MES_745515_1
GE/U-84/2025-26
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (Utilities) Udhampur
AS PER NIT
8 documents required · 8 mandatory
₹500
GE (Utilities) Udhampur
₹99,980
19 Jan 2026
20 Dec 2025
19 Jan 2026
20 Dec 2025
17 Jan 2026
3 Jan 2026
Amount
Supply, install, testing and commissioning in replacement of of wire mesh cable tray hot dip galvanised type of size of 105 mm height X 300 mm width, 3 meter length each as per EN 12329 and IEC 61537 with wire diameter of 3.9 to 5.9 mm and having SST of 550 Hrs tested, having E30/E90 certification, with following specification all as per directed by engr in charge i) C41S/RCSN/R35 (wall/celling/ground mounting supports) every after 1 meter distance. ii) Kitaster coupler (Jointimg tray) 5 sets per joint. iii) Down rod of 1 meter length each. iv) Nuts 3 nos for each rod v) COUPFIL(Cutter) 01 No. vi) L supports for wall with all accessories such as nut bolt washers etc. Note:- a) Shifting of all existing HT and LT cables, Removing connections of these cables and refixing at its original position through cable trays in a proper manner all as directed by engr in charge is included in the quoted rates. b) All major and minor spares are required in laying of cables and fixing of cable trays which are not mention above are included in the quoted rates. c) All meterial such as cement, concerete, tiles etc to make wall/roof /ground in its original shape after fixing of cable trays are included in the quoted rates
Supply, install, testing and commissioning in replacement of wire mesh cable tray hot dip galvanised type of size of 105 mm height X 400 mm width, 3 meter length each as per EN 12329 and IEC 61537 with wire diameter of 3.9 to 5.9 mm and having SST of 550 Hrs tested, having E30/E90 certification, with following specification all as per directed by engr in charge i) C41S/RCSN/R35 (wall/celling/ground mounting supports) every after 1 meter distance. ii) Kitaster coupler (Jointimg tray) 5 sets per joint. iii) Down rod of 1 meter length each. iv) Nuts 3 nos for each rod v) COUPFIL(Cutter) 01 No. vi) L supports for wall with all accessories such as nut bolt washers etc. Note:- a) Shifting of all existing HT and LT cables, Removing connections of these cables and refixing at its original position through cable trays in a proper manner all as directed by engr in charge is included in the quoted rates. b) All major and minor spares are required in laying of cables and fixing of cable trays which are not mention above are included in the quoted rates. c) All meterial such as cement, concerete, tiles etc to make wall/roof /ground in its original shape after fixing of cable trays are included in the quoted rates
Supply ,fabricating and fixing in repairs cross arms ( any type) supports, bracing, stiffeners anti climbing spikes, LT Panel Door, hinge with welding, Chequred Plates, MS Iron Angle frame made out of MS channel, angle iron, flat of any size including drilling of holes making clamps including eye hooks, nuts bolts and washers etc welding if required including painting with two coats of Synthetic Enameled paint (any shade as per site Requirement) over a coat of red oxide primer.
Supply and fixing PVC insulation tape red,yellow, blue colour 25 mm 25 mtr length tape Roll Lall, complete all as specified and directed by Engr-in-Charge.
S&F double walled corrugated (DWC) pipe of size 120 mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of LT cable in under ground/floor , complete all as specified and directed by Engr-in-Charge. Make: REX/Tirupati Plastomatics Pvt Ltd
S&F double walled corrugated (DWC) pipe of size 77 mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of LT cable in under ground/floor, complete all as specified and directed by Engr-in-Charge. Make: REX/Tirupati Plastomatics Pvt Ltd
S&F double walled corrugated (DWC) pipe of size 50 mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of LT cable in under ground/floor, complete all as specified and directed by Engr-in-Charge. Make: REX/Tirupati Plastomatics Pvt Ltd
M&L for in replacement of copper thimble (Lugs) suitable for Cable of following sizes, complete all as specified and directed by Engr-in-Charge.
Description all as per ser item No 8.00 here-in-before but size 70 sqmm to 95 Sqmm
Description all as per ser item No 8.00 here-in-before but size 120 Sqmm
Description all as per ser item No 8.00 here-in-before but size 185 Sqmm
M&L for in replacement of PVC insulated heavy duly industrial multistandard cable single core copper conductor (flexible) 1100 volt grade of following sizes complete all as specified and directed.
Description all as per ser item No 12.00 here-in-before but size 95 Sqmm
Description all as per ser item No 12.00 here-in-before but size 120 Sqmm
Description all as per ser item No 12.00 here-in-before but size 185 Sqmm
Supply, install, testing and commissioning Electromagnetic flow meter size 450 mm dia, integral display /Rubber lining with following specifecations: Flow rate-90.46 to 5427.84 cum/hr, Transmitter -die cast aluminium IP66, power supply-230V ,Outputs -RS4585/4-20mA/MODBUS, Senser Terminal housing-C.S Fabrivated IP 66,Display-Graphic Display, Flange-ASA#150 C.S., Electrode-SS16L,Grouting Electrode-SS316L,Flow tube -SS304, Coil Housing-C.S., and 1 Year warranty with Callibration Certificate inclding cutting/welding of MS pipe 400 mm dia and eletrical connection, complete all as specified and directed by Engr-in-Charge.
Supply and lay in replacement XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 sq mm 3.5 core in trenches/floor/pole/GI pipe complete including cutting/chasing to any surface and making good to the disturbed surface to match the existing, complete all as specified and directed by Engr-in-Charge.
M&L for Earthing complete with galvanised steel earth plate electrode 60 × 60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion, complete all as specified and directed by Engr-in-Charge.
Supply and lay in replacement MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA complete connection, complete all as specified and directed by Engr-in-Charge.
Supply and lay in replacement MCCB 4 Pole, 415 V, Adjustable type, 400 Amps with breaking capacity 36 KA complete connection, complete all as specified and directed by Engr-in-Charge.
Supply and lay in replacement MCCB 4 Pole, 415 V, Adjustable type, 630 Amps with breaking capacity 50 KA complete connection, complete all as specified and directed by Engr-in-Charge.
M&L earthing complete with Copper earth plate electrode 600mmx600mmx3.15mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of earth plate not less than 1.5 mtrs below normal ground level connected with copper earth strip 32mmx6mm thick and copper bolts, nuts, etc and protected by GI pipe light grade 40mm bore and 20 mm dia GI tubing light grade with funnel for watering, connecting to busbar, all as shown in electrical plate No.3 of SSR Part I incl necessary earth work and excavation in any type of soil, PCC earth chamber with RCC cover slab, salt, charcoal and MS hook, ane provn of test point complete. NOTE : copper strip 20x3mm upto 7.5 Mtrs with 40mm protection pipe shall be included in quoted rates and beyond 7.5 mtrs shall be measured and paid separately..
S &F LED Tiranga Rop light 18 Mtr,IP 65,Input Power 10W/meter,Input Voltage 220-240 VAC Input frequency 50 Hzs,Input current 0.045 Amp/Mtr,Power factor 0.95,Width of strip(+/- 0.1 mm) 8 mm length/reel-18 mtrs,No of led per mtr 120 LED,LED Beam angle 120 degree ,Rope light per Colours length 6 mtr orange, 6 mtr white ,6 mtr Green,Fixing method silicone clip ,Ingrass Protection -IP -65, Ingrass protection method silicone tube ,silicone tube dimention 11.5x5.5 mm+/- 0.5 mm,working temp range-20 degree celcius to + 45 degree celcious ,working humidity range 10-90 RH, including driver for each cut piece complete all as specified and directed by Engr-in-charge. Make Wipro/Philips/Crompton.
Material and labour for replecement Air circuit breaker, 800 Amp rating, 4 Pole, 415 Volts, manual drawout type with microprocessor release of capacity 800 Amps, complete all as specified and directed by Engr-in-Charge. Make: Schenider/L&T/ABB/Legrand or equivalent make.
Material and labour for replecement Air circuit breaker, 1600 Amp rating, 4 Pole, 415 Volts, manual drawout type with microprocessor release of capacity 1000 Amps, complete all as specified and directed by Engr-in-Charge. Make: Schenider/L&T/ABB/Legrand or equivalent make.
Material and labour for servicing/callibration /Repair to Air circuit breaker, 800 Amp by OEM OF ACB only for EDO ( Electrically Draw out type/MDO type ( Mannually Draw out type).Taking out ACB for servicing/repair and checking/callibration of microprosser release ,Earth fault protection of 4 pole,50 KA breakingt capacity 415 volts with all draw out type mechanism,advanced self powered electronic protection units,neutral overload protection.automatic earth fault relay/over current relay,automatic safety shutter,inbuild temperature protection.icu=ics=icw(1s)=50 Ka fixed in panel including shunt release,earth fault release, wiring checking,LT UG cable connection requirement of any spare parts for its healthy functioning of ACB complete all as specified and directed by Engr-in-Charge Note- Certificate of Servicing /callibration will be providded by the contractor free of cost
Construction of valve pit brick masonary, internal size 1200x1200x1200mm (from top fo PCC to bottom of cover) including excavation in any type of soil, returning, filling in around foundation, removal of surplus soil to a distance not exceeding 50m, PCC 1:4:8 type D-2 in foundation, brick work in CM 1:4, 12mm thick plaster in CM 1:4 to internal surfaces and flush pointed externally as the work proceeds in the same mortar PCC coping 1:2:4 type B-0 using 12.5mm graded stone aggregate, pit cover of MS sheet 5mm thick, handle and 40x 6mm FI 230mm long with 25mm dia hole at other end locking arrangement, fixing arrangement and painting with synthetic enamel paint two coat of red oxide primer, complete all as specified and directed including demolition of old UNSV existing valvepit.
Supplying and laying synthetic Rubber insulated mats 2.5 mm thick for voltage upto 11 kv for electrical purpose suitable for electrical shock safety of sizes 2m x 1m, complete all as specified and directed by Engr-in-Charge.
Supply & fix in replacement Loss of Head (LoH) for Rapid sand filter cap 40,000 Glns/hours, monitoring the Level in High Pressure and low pressure side of the gravity filter / Traveling water screen. The Loss of Head arrangement shall have following feature complete all as specified and directed by Engineer-in-Charge.- (a) Measuring Differential level in Filter Beds. (b) Housing : Cast Aluminium, Powder Coated. 198*170* 99 mm (c) Mounting : Wall Mounting (d) Power Supply : 230 V AC, 50 Hz (e) Power Consumption : 4 VA (approximately) (f) Adjustment Range : Span : Min 10% of Electrode Length, Max 80% of Electrode Length & Zero : Max 80% of Electrode Length (g) Alarm : A relay C/O rated 6 Amps 230 V, non-inductive load adjustable throughout range (h) Current output : 4-20mA DC non isolated, max. load resistance 600 Ohms, corresponding to differential level (j) Accuracy : ±4% of Electrode Length (h) Supplied with Rate of Flow (RoF) in a common CA Housing with IP-55 Protection Note: Material and labour charges & cables for installation/connection of setup & taking down old setup shall be deemed included in the quoted rates.
M&L for painting complete outer surrounding of Over head tank in Tiranga Colour including writing of "SAVE WATER, SAVE LIFE " in blue colour on center white colour, complete all as specified and directed by Engr-in-Charge.
M&L for flex banner of size 1.0 mtr x 0.6 mtr supported with iron frame, about the machinery installed in different instalations such as Cap, discharge, MES No, Year of installation and head of the machinery on the blue background with white colour including fixing on wall with clamps, complete all as specified and directed by Engr-in-Charge.
M & L for painting of Header of dia up to 300mm with inlet, outlet, sluice valve, NRV etc including surface preparation by scrapping with emery paper and painting with one coat of red oxide primer and two coats of synthetic enamel paint of existing colour of approved make to the satisfaction of Engr in Charge complete all as specified and directed by Engr-in-charge. Note: Marking with white colour on each outlet is included.
S&F 3D signage board made of high quality plastic material with raised 3D letters supported with iron frame of size 4 mtr x 0.5 mtrs in Acrylic sheet moulded letters Tawi JACKWELL Garrison Engineer (Utility) and TAWI FILTER Garrison Engineer (U) including MES logo printed on both side of name on the blue background with white colour of size 1x1 feet white in colour with good quality LED Strip including constant current electronic driver and making connection with suitable size copper conductor multistranded FRLSH wire including fixing on wall with clamps, complete all as specified and directed by Engr-in-Charge. Make of LED strip :-Philips,Wipro,Havells or equivalent
M&L for replacement of Slow speed agitator (Alum mixer) Liquid Handled: Alum, Shaft length 850mm below mounting plate, Shaft Dia. 25 mm, Impeller Dia. 250mm PBT Type - Three Blade , Impeller - 2 Nos., Output RPM 150 RPM, Gear box details: Worm Type, Output RPM 150, Ratio 10:1, 1HP /0.75 kw, 4pole, motor , SF- 2, Model- ELMN50/63-. Service tank of capacity 500 ltrs. Motor Data : Drive Rating HP / KW 1Hp / 0.75 Kw, Drive Details 4pole, 1440 RPM, STD. TEFC, Flange mounted, Vertical, IP55, 50hz, 415volts, 3 Phase, IE2, Non Flame proof. Make Crompton Greaves, Kirloskar, KSB. MOC of Shaft SS316, MOC of Impeller SS316,Mounting Bearing Housing M.S. Painted, including 500 Ltrs. Tank complete all as specified and directed by Engr-in-charge. Make: Dynamic Equipments Pvt. Ltd, Verito Engineering Pvt Ltd, RECKON Techno Dosing Pumps And Systems, Rudraksha Engineering or equivalent as approved by accepting officer.
Supply, fabricate, erect , connect, test and commissoning of factory made, CPRI approved, cubical type, indoor type LT panal board of size 1500x1200x600 mm, totally enclosed , dust, weather and vermin proof 1100 Volt grade , 50Hz, AC supply made out by 3.15mm thick CRCA sheet steel for load bearing and 2 mm thick for non load bearing, fully compartmentalised, with IP 65 protection all as per conferming to IS 2417 of 1962 complete including the following accessories housed with MS angle section 40x40x06mm mounted on PCC 1:2:4 types- B-1 platform with nut and bolts complete all as specified and directed by Engr-in-Charge. (a) MCCB 4 Pole 250 Amps, 415 V, 35 ka ( Incomer). (b) Indicator (RYB) I set. (c) MCCB 4 pole 125 Amp, 35 ka -02 ( Out going) (d) Aluminium bus bar 400 Amp with CT&PT. (e) MCCB 4 pole 63 amp, 35 Ka -02 (f) Volt meter & Amp meter for suitable capacity of panel
PAUL TRADERS (BID ID -3520528)
DAVINDER SINGH (BID ID -3526399)
VARDHMAN INTERNATIONAL (BID ID -3520681)
M/S DHARAM & SONS ENTERPRISES (BID ID -3517537)
PROACH ASSOCIATES BUILDERS & ENGINEERS (BID ID -3519837)
ATUL TRADING CO (BID ID -3520864)
slathia construction works (BID ID -3521032)
MOHAN LAL AND SONS (BID ID -3521384)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
TENDER84.pdf
Tender Documents • 1.29 MB
BOQ_834781.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .