Addn/ Altn to JCOs/OR Qtrs in Khyber lines under GE (South), Delhi Cantt-10

Amount

Taking down door/window chowkhat or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc. 4 Sqm each complete all as specified and as directed.

Taking down door/window chowkhat or frame with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and as directed.

S&F factory made 2nd class 35 mm thick hardwood glazed and Skelton shutters open rebated and prepared to receive glass / gauze etc. ( with or without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified and as directed.

S&F in repair 35 mm thick factory made flush shutters solid core construction with block board core and plywood face panels, commercial type on both side complete all as specified & directed

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be coloured with heat mould plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stills and plain colour PVC sheet for top rail lock and bottom rail either side and as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified, shown on drawing and as directed.

S & F solid PVC doors & frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with 19 mm MS square tube of 19 gauge complete all as specified, shown on drawing in SSR 2004 Part II & directed.

S & F 100 mm size butt hinges medium weight stainless steel complete all as specified & directed.

S& F in repairs factory made PVC cupboard frame of size 75 mm x 40 mm with a wall thickness of 4 mm , made out of extruded 4 mm thick plain / prelam PVC sheet of density 600 Kg/ Cum manufactured by an ISO -9001-2015 certified company , reinforced with 15 mm x 15 mm MS square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2 nos of 150 mm long brackets of 10 mm x 10 mm MS Square tubes .The door frame shall be fixed to wall using 65 /100 long MS screws to be provided for each vertical member and minimum of 2 nos of screw to be provided horizontal member etc. complete all as specified & directed.

S&F repairs factory made PVC flush type shutter of 18 mm thickness consisting of Panel of Hollow PVC Profile of 12 mm thickness consisting of MS frame made out of MS tube of 16 gauge and size of 10 mm x 10 mm inserted all around the hollow profile section and lipped with 8 mm ( 4 mm x 2 mm ) thick and 12 mm wide on stiles and rails using solvent cement . The inner panel shall consist of 4 mm plain / prelam PVC sheet of density 600 kg / Cum manufactured by an ISO -9001-2015 certified company on the front side &2 mm plain / prelam PVC sheet using solvent cement on both side of the panel. The thickness of the shutter is edge lipped by 18 mm width x 1 mm thick PVC sheet using solvent cement etc. including necessary fittings, locking and fixing arrangement i.e. piano hinges, handles , magnetic catches etc. Complete all as specified and directed and as per manufacture’s specification and drawing .

S & F in replacement 19 mm thick pre-laminated particle board exterior grade , pre-laminated both side with decorative choice lamination fixed with screws to timber frame complete all as specified and directed .

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples to aluminium window frame / wooden doors or steel section windows complete all as specified and directed .

S & F 150 mm long stainless steel barrel tower bolt of extruded section and fixed complete all as specified and directed .

S & F 100 mm ling stainless steel barrel tower bolt of extruded section, complete all as specified and as directed .

S & F 250 mm long stainless steel sliding bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and as directed .

S & F aluminium alloy handle of stainless steel, 100 mm size complete all as specified and as directed .

S & F aluminium alloy handle of stainless steel ,of 150 mm size. complete all as specified and as directed .

S & F gate and shutter hook and eye 150 mm size, aluminium plate type II complete all as specified and as directed .

S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring of 140 mm size with vulcanised rubber piece, complete all as specified and as directed .

S & F rolled mild steel in Fe 410-W(Gde-E-250) quality-A, framed work as in doors or gates of angle or other section with gusset plates, etc., complete, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified and as directed .

M & L for powder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5 mm thickness and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick section(two shutter glazed, covering half of span of opening each & one shutter Skelton covering half of span of opening ) including provn for making windows air tight, including 95 mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with steel wire staples and 5 mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified and as directed . Note: Measurement shall be taken for clear opening i.e. outer dimension of window frame as a whole including all fittings and fixtures and nothing extra shall be paid separately.

S&F Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified.

M & L preparation of new untreated surfaces of wood of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over & including one coat of pink primer complete all as specified and directed.

M&L preparation of new or previously untreated surfaces of steel of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & including one coat of red oxide primer complete all as specified.

S & F in repair, 25 mm bore mild steel 0.8 mm thick conduit pipe with PVC ribbed lamination of required length for curtain rods including two fixing mild steel powder coated matching colour full round or half round with fixing nuts (bracket holders), & PVC golden finish end knobs(Two number for each curtain rod of any length) and PVC gold finish curtain ring @ 10 Nos per RM complete all as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed .

M & L for non Skid ceramic tiles 7 to 8 mm thick coloured & joint free (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed .

M & L for glazed coloured , joint free ceramic tiles in vertical surface of size 450 X 300 X 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed .

M & L for coloured joint free non Skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed .

M & L for 15 mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, complete all as specified and as directed .

M & L for 10 mm thick rendering on brick/concrete surfaces in CM (1:3) (As screeds in back of tiles) in dado complete all as specified & directed.

M& L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed.

Rounding to edges of stone slabs one edge, such as in steps cooking platform and other similar situations complete all as specified & directed.

S & F in repair wash hand basin vitreous China flat back 550 x 450 mm size white, including PVC waste coupling 32 mm size, pair of brackets of mild steel 35 x 35 x 6 mm size complete all as specified & directed.

M & L for dismantling of floor of toilet with WC seat & taken out the cinder from sunken portion of toilet, taking down of cement plaster of any thickness & description of wall & floor, provide 25 mm dia GI pipe(medium grade) spout projecting at least 150 mm beyond outer face of wall, 15 mm thick plaster in CM 1:4 mixed with WPC(as per manufacturer's instructions) both on floor & wall, then applying Epoxy Resin Coating polymer(water proofing coating for sunken portion as per manufacturer's instructions) both on floor as well on wall, filling sunken portion with graded cinder & laying 50 mm thick floor in PCC 1:2:4 (20 mm graded stone aggregate.) floor area not exc. 3.50 Sqm complete all as specified & directed.

S & F in repair vitreous china squatting pan (Orissa pattern) long pan fixed size 580 x 440 mm white with integral footrest with `P' or `S' trap complete (excluding flushing cistern and flush pipe) complete all as specified & directed.

S & F Wash hand basin mixer, Brass CP, 15 mm bore, for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F PVC connection for 15 mm bore pipe, 450 mm long complete all as specified and directed.

S & F 32/ 40 mm bore and 75 long PVC Waste pipe suitable for WHB /Sink complete all as specified and directed .

S & F in repairs Brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S & F in repair, PVC valve less , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and PVC flush pipe 32 mm dia for low level complete all as specified and directed.

S & F 15 mm chromium plated fancy type bib tap long body with flange fixed in 15 mm bore of pipe, cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and directed .

S & F 15 mm angle stop valves (fancy type), cast copper alloy , chromium plated, screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union complete all as specified and directed.

S & F Stop valves 15 mm bore fancy type, CP with long shank & cup (concealed type), cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F brass CP swivel shower rose of size 125 mm with arm including fixing to steel pipes complete all as specified and directed.

S& F grating doom 125 mm dia with waste hole of chromium plated (Minimum weight 40 gms) complete all as specified and directed.

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc. on walls and ceiling complete all as specified and directed.

M & L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 on wall surfaces and finished surface even and smooth without using extra cement complete all as specified and as directed .

M & L for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 on wall surfaces and finished surface even and smooth without using extra cement complete all as specified and as directed .

M & L for 10 mm thick rendering in CM (1:3) on ceiling finished even & smooth without using extra cement complete all as specified. complete all as specified and directed .

M & L for preparation of old decorated wall surfaces by complete removal of existing treatment and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) over a coat of primer of same make complete all as specified and directed.

M& L for complete removal of existing treatment of old treated wall surface and applying two coats of distemper oil emulsion over alkali resistant primer over 1-2 mm wall care putty to achieve smooth, even & uniform surface complete all as specified and directed.

M & L for preparing old plastered surfaces and applying a coat of white wash on wall complete all as specified and as directed.

M&L for preparation of newly plaster surface of wall applying three coat of white wash complete as specified and directed

M & L for preparing old plastered surfaces and applying a coat of white wash on ceiling complete all as specified and as directed.

M & L for preparation of newly plaster surfaces and applying three coats of white wash on ceiling complete all as specified

M & L for applying two coats of cement base paint, white or tinted on new plastered surface including preparation of surface complete all as specified and directed.

M & L for of new plastered surface and applying two coats of distemper oil emulsion over alkali resistant primer over 1-2 mm wall care putty to achieve smooth, even & uniform surface complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit and making good cutting not exc. 10 cm in girth in brick wall complete all as specified and directed .

Taking up or down steel tubing 15 mm bore and connection including fittings and cleaning for refixing or removing to store complete all as specified and as directed .

Taking up or down steel tubing 20 mm bore and connection including fittings and cleaning for refixing or removing to store complete all as specified and as directed .

S & F 15 mm bore GI tubes, medium grade galvanised, with all tube fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

S & F 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Taking down cast iron pipes of following sizes including fittings with cement joint etc. to facilitate dismantling old serviceable fittings/pipes laid in trenches, floors or fixed to walls including earth work, demolition of PCC / Brick work complete all as specified & directed.

100 mm bore of pipe.

75 mm bore of pipe.

S & F cast iron(spun) soil, waste or vent pipes (ISI Marked) of following sizes, in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors complete all as specified & directed.

100 mm bore of pipe.

75 mm bore of pipe.

All as per srl item No 63.00 here-in-before but fixed to wall.

100 mm bore of pipe.

75 mm bore of pipe.

S & F cast iron branch pieces (ISI Marked) of following sizes, single (equal or unequal) ordinary of inverted spigot or socket type complete all as specified & directed.

100 mm bore of pipe.

75 mm bore of pipe.

S & F cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) of the following sizes complete all as specified & directed.

100 mm bore of pipe.

75 mm bore of pipe.

S & F 75 mm out let dia CI floor trap including jointing to waste pipe with cement joint complete all as specified & directed.

S & F 100 mm out let dia CI floor trap including jointing to waste pipe in run lead complete all as specified & directed.

S & F PVC (SWR) pipes 110 mm bore size single socketed, in any length with rubber ring joints, fixed to wall with and including MS flat iron clamp 25x 3 mm including taking down old rain water pipe complete all as specified & directed.

S & F PVC(SWR) pipes 75 mm bore size single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed .

S & F PVC(SWR) bends any radius, of 110 mm bore size complete all as specified and directed .

S & F PVC(SWR) bends any radius, with threaded type door eye of 110 mm bore size complete all as specified and directed .

S & F PVC(SWR) bends any radius, of 75 mm bore size complete all as specified and directed .

S & F PVC(SWR) bends any radius, with threaded type door eye of 75 mm bore size complete all as specified and directed .

Cutting of trees including cutting of trunk n.exc. 30 cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg. and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete all as specified.

Demolition of brick work built in CM including quoins, arches, pillars etc. complete all as specified & directed.

M & L for brick work in cement mortar (1:6) using sub class 'B' old sized bricks, straight or curved on plan exc. 6 mtr mean radius complete all as specified & directed.

M&L brick work in cement mortar (1:4) using sub class 'B' old sized bricks, straight or curved in plain exc 6 mtr mean radius in half brick thick wall.

Demolition of existing brick tiles or terracing tiles, single layer on roofs, bedded, jointed and pointed in any mortar complete all as specified & directed.

Demolition of lime concrete/ Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only or part thereof)& removal of mud outside MoD land complete all as specified & directed.

M & L for spreading / brushing neat cement slurry @3.00 Kg/ Sqm on old concrete surface complete all as specified & directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as on roof slope padding, complete all as specified & directed.

M & L for screed bed 10 mm thick (average) plaster on concrete surfaces in CM (1:3) on roof, mixed with integral water proofing compound as per manufacturer's instructions and finishing the surface even and smooth without using extra cement all as specified and directed (Water proofing compound shall be measured and paid separately).

S & F APP polymeric water proofing membrane minimum 3mm thick and weighing not less then 3.00 kg per Sqm of black finish reinforced with non woven polyester fabric(wt. not less than 150 gms/sqm) with a thermo fusible finish laid over a coat of bitumen primer @0.5kg/Sqm by torch application with a propane or a butane gas torch with an overlap of 100 mm at the ends and including applying a coat of cold emulsion bituminous primer all as per manufactures instructions including preparation of surface complete all as specified and directed. Note:- The water proofing treatment shall be got carried out by manufacture or their authorized applicators .

M & L for cement concrete tiles 20 cm x 20 cm x 20 mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and pigments over 20 mm thick screed bed in CM (1:4) complete all as specified and directed .

Cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified & directed.

M & L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in benching, roof kerbs and similar work rounded or chamfered complete all as specified & directed.

Surface excavation in soft/loose soil, not exceeding 30 cm deep and averaging 15 cm deep and getting out, complete all as specified & directed.

Demolition of lime concrete or cement concrete including tilling etc. in ground floors and pavings not exc. 15 cm thick (below or above ground level) complete all as specified and directed.

M & L for 75 mm thick plain cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in sub base of floor / plinth protections etc. finished surface fair & even complete all as specified & directed.

Forming Construction joint 30 mm deep x 10 mm wide filled with sealing compound grade 'A' complete all as specified & directed.

M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and no pigment complete all as specified & directed.

M & L for moorum/ sand filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified & directed.

Roughening surfaces of old concrete floor/wall by picking, sweeping clean and washing down with water to remove dust, etc. and brushing and applying neat cement slurry with 3.0 Kg of cement per Sq. metre complete all as specified and directed.

S & F machine cut kota stone slab flooring 20-25 mm thick laid over & including 20 mm thick cement screed bed in cement mortar 1: 6 , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed.

All as per item no 94.00 here-in-before but on vertical surfaces as in dado over & including 15 mm thick screed in cement mortar 1: 3 .

M & L for removing excavated soils n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed .

Dismantling water tanks of capacity exceeding 250 liters but not exceeding 500 liters complete all as specified and directed..

S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), triple layer white from out side, hoisted and fixed in position all as specified in SSR Part I of 500 litre capacity with threaded type lid cover complete all as specified & directed.

S & F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball ,screwed for iron pipe complete all as specified and directed.

S & F gun metal globe or gate valve for 15 mm bore pipe with iron wheel had screwed both ends for iron pipe all as specified and directed.

S & F gun metal globe or gate valve for 20 mm bore pipe with iron wheel had screwed both ends for iron pipe all as specified and directed .

S & F galvanised iron tank nipple 15 mm bore suitable for HDPE water tank complete all as specified & directed.

S & F in repairs 1.00 mm thick stainless steel plate rack overall size (31 X 36 X 10 inch) fixed with steel screws complete all as specified and directed.

S & F stainless steel sink with drainage board of 1 mm thick sheet for kitchen with plug washer, waste pipe, cast iron cantilever brackets connecting union, fixed in position complete all as specified and directed.

S & F in repair mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M & L for chipping of spalled and loose concrete and cleaning rust from re-reinforcement by sand blasting scrubbing down concrete surface with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over and including steel welded mesh having 2 mm dia of wire and aperture 50 mm, total thickness of gunite n.exc. 25 mm thick (average thickness) in cement mortar 1:2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc. of slabs, chajjas, fins, facias, parapets, Lintels, columns and beams etc. complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height up to 2 storey bldgs. including finishes as existing complete all as specified & directed.

All as per Ser item No 106 here-in-before but thickness of gunite exc. 25 mm but n.exc. 40 mm (average thickness)

S & F FRP window horizontal shade (Chhajja) for sun shade and protect to rain, thickness and weight as per manufacturers instruction, fixed with screw with drilling holes in the walls and making good surfaces to match with the existing surface with plaster and cement base paint/ Exterior paint including demolition of existing chaajjas and removing waste material remove from the site complete all as specified and directed. Colour will be approved by GE. Note:- Area of chajja on plan shall be measured for payment.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed .

S & F rolled mild steel work as railing (framed) including stringers, treads, landing, balusters, hand rails etc., including cleats, brackets, etc. Fe410 -w (Gde E250 ) quality 'A' complete all as specified and directed .

Taking down carefully the old unserviceable Aluminium/Copper point wiring (light, fan, socket or power) complete, including fixture & fittings such as switches, ceiling roses, pendants, sockets, regulators, light fittings etc. and making good disturbed surfaces of walls complete all as specified and directed .

M & L for point wiring with standard copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in existing concealed PVC conduit medium grade and sunk in new pressed steel terminal boxes of required size factory made and factory painted with stove enamelled black paint with top cover 3 mm thick plastic/laminated sheet of required colour with screwed and cup washer with all accessories including 1.5 Sqmm standard copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified for following : Note:- the rate is inclusive cutting /chasing and making good the disturbed surface with cement mortar 1:3 and match surface finishes with the adjoining surface of disturbed area complete all as specified and directed. New conduit of suitable size with connected fittings will be laid, if there is damage / blockage in existing conduit and the rates are inclusive of quoted rates .

One light/fan/Bell point controlled by one way switch

One light point controlled by two 2-way switch

One 3 pin socket outlet 5 amps independent board

One 3 pin socket outlet 5 amps point on same board

All as per Srl item No. 112.00 here-in-before but for one 3 pin socket outlet, 15 amps on independent board with cable 2.5 Sqmm for main current and 2.5 Sqmm as earth wire .

S & F switch piano, flush type 5 Amps single pole one way, ISI marked complete all as specified and directed .

S & F switch piano flush type 6 Amp single pole two way ISI marked complete all as specified and directed .

S & F socket outlet 2 in 1, 3 pin piano, flush type 5 Amps single pole one way, complete all as specified and directed .

S & F switch piano, flush type 15 Amps single pole one way, complete all as specified and directed .

S & F socket outlet 3/5 pin piano, flush type 15 Amps single pole one way, complete all as specified and directed .

S & F bell push flush type 5 Amps, complete all as specified and directed .

S & F ceiling rose surface Bakelite 60x 25 mm two to three terminals, complete all as specified and directed .

S & F ceiling electronic fan regulator, socket type complete all as specified and directed .

S & F for Batten holder with PVC body and back plate suitable for LED Bulb B-22 cap complete all as specified and directed .

S & F Elect bell Ding Dong complete including flexible wire , ISI marked complete all as specified and directed .

S & F LED Integrated Aluminium Batten T5 20 watt - 4 Ft White, indoor decorative PVC extruded T-5 LED batten - integrated type complete with all accessories including flexible wire complete all as specified and directed .

S & F for wall mounting fitting City-4, Decorative wall light fixture made up of Polycarbonate, suitable for 15 W TU retrofit CFL (B-22 base) complete all as specified and directed.

S & F LED 10 watt white Bulk head in engineering plastic housing with clear prismatic including all accessories connecting up twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz complete all as specified and directed.

S & F LED Integrated Batten aesthetically designed linear mirror LED light fitting (LINNET) of 07 Watt 1 feet long, white, indoor decorative PVC extruded provided with a high output PMMA diffuser for glare free light LED batten integrated type complete with including flexible wire complete all as specified and directed .

S & F inverter bulb 12 watt rechargeable emergency LED bulb for home, cool daylight, base B22 for wall mounting fitting\ Holder complete all as specified and directed .

S & F LED Building security light fitting 45 W on existing bracket complete all as specified and directed .

S & F in replacement MCB DB SPN 8 Way double door type, (IP 43 Protection) flush mounting for MCBs complete all as specified and directed .

S & F MCB SPN 40 AMPs C curve complete all as specified and directed .

S & F MCB SP 10/16/20/30 or 40 Amps "C" curve complete all as specified and directed .

M & L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm, 1100 Volts grade in & including concealed PVC Conduit 25 mm medium grade complete with conduit accessories and copper cable 6 Sqmm continuous earth wire including taking down old sub main wiring complete all as specified and directed. Note:- (a) Two runs of cable with 01 run of earth wire shall be measured as one unit length) (b) The rate is inclusive of cutting / chasing and making good to disturbed surfaces with cm 1:3 and same surface finishes with the adjoining surface of disturbed area .

All as per Srl item No. 133.00 here-in-before but with cable of 10 Sqmm size

S & F in replacement of distribution board vertical triple pole and neutral (VTPN) 8 way for fixing MCCB up to 125 Amps as incomer and MCBs as out goings with metal door and IP 43 Protections and connecting complete all as specified and directed.

S & F MCCB 125 Amp, 415 Volts, 3 Pole, fixed type with breaking capacity of 36 KA complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 3.0 mtr deep below GL with top edge of the plate not less than 2.5 mtr below normal GL and connected to earth plate . Earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt up to 1.5 meter depth all around the earth plate and connected to earth lead of GI earth wire 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvanized iron or steel pipe light grade 15 mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Part-I of 2009 and also including making test point for testing of earthing made out of gun metal or phosphorous bronze size 75x75x25 mm complete . Note :- 1. RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80 mm thick reinforced with XPM weighting not less than 4 KG/sqm in lieu of CI cover. 2. Charcoal dust and common salt up to 1.5 meter depth shall be filled in layers of 15 cm all around the earth plate. on testing after completion of earthing if desired earth resistance is not achieved , the earthing will be redone at no extra cost to obtain the desired earth values.

M & L Earth continuity conductor or main earthing lead fixed on wall/ceiling in batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed on poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire complete all as specified and directed.

Supply and fixing metal body exhaust fan 300 mm sweep, 230 Volts, single phase 1400 RPM with copper wound and louvers including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/Switch board of exhaust fan including fixing of nuts bolts of suitable size, cutting hole of appropriate size as per exhaust fan with suitable Civil works and making good to the disturbed surfaces of walls with OBD/White wash to match with the existing complete all as per site requirement as specified and directed .

Supply and fix ceiling fan (Opal white) economy range high speed having full copper motor & ribbed alluminium blades for higher air delivery, power coating to provide longer life complete with accessories 230 volts 1200 mm sweep, 300 RPM with air delivery 255/265 Cum/min including making arrangement to hanging of fan to ceiling with proper hook nut bolts all as specified & directed. Note : Existing ceiling fans to be taken down from ceiling and deposit to the MES Yard .

Taking down the existing electric (KWH) single phase meter any type from wall/box and refixing the same after carry out repair work to functional a faulty meter and replacing a necessary parts like wires, relay, indicator lamp and seal if required complete all as specified and directed .

M & L for double door wooden box of suitable size for fixing of 8 Nos Single Phase electric meter (KWH) of good quality wood with ISI marked of 18 mm thick including double coat of synthetic enamelled paint over a coat of pink primer and mica top cover over outer side of door, locking arrangement and fixing properly over wall under staircase as indicated at site complete all as specified and directed .

Supply & fixing of water storage heater 5 star BEE rating in white colour with metal body (Geyser) of capacity 25 litre, vertical type, AC, electric, 230 volt, complete with heating element, thermostat, 3 core lead, Plug top, safety valve, including electric and water connection and making good to disturbed surface complete all as specified and directed

S & F PVC connection with brass nipple 15 mm x 600 mm long with ISI marked suitable for hot and cold water of 25 Ltrs capacity of geyser as hot and cold water connection complete all as specified and directed.

M & L for Supercera Ceramic Fibre Rope of 12 mm dia with SS304 Braided Rope over the hot water supply pipe of 15 mm bore dia in spiral position including wrapping the aluminium tape of good quality over Supercera ceramic fibre rope to maintain the temperature of hot water in geyser at appropriate level at the peak time of winter complete all as specified and directed . Note. Length of rope shall be measured for payment.

V r traders

SHEELSONS ENTERPRISES

Adhunik Builders

BNL INFRA BUILD CON

n s kumar and sons

M/S Chhavi Constructions Co

V M CONSTRUCTION