Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAccepted-Finance | L1 | Accepted-Finance Accepted | |
| 2 | L2₹1.7 L+₹1,255 (0.72%)Rejected-Finance COOCH BEHAR 736101 | COOCH BEHAR | COOCH BEHAR | WEST BENGAL | 736101 | L2 | Rejected-Finance Rejected | |
| 3 | L3₹1.7 L+₹1,300 (0.75%)Rejected-Finance COOCH BEHAR WEST BENGAL | COOCH BEHAR | COOCH BEHAR | WEST BENGAL | 736101 | L3 | Rejected-Finance Rejected |
Tender Value
Refer Docs
EMD Value
₹3,506
Closing Date
22 Mar 2024, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
ASSISTANT ENGINEER, COOCHBEHAR ELECTRICAL SUB DIVI
ASSISTANT ENGINEER, COOCHBEHAR ELECTRICAL SUB DIVI
WBPWD/AE/CESD e-NIQ-12 of23-24 (3rd call)
2024_WBPWD_683882_2
WBPWD/AE/CESD/e-NIQ-12 /of 23-24(3rd call)
Open Tender
ELECTRICAL WORKS ORG
Item Rate
10 days
COOCH-BEHAR
Please refer Tender documents.
6 documents required · 6 mandatory
₹3,506
Yes
3 Apr 2024
12 Mar 2024
27 Mar 2024
12 Mar 2024
22 Mar 2024
12 Mar 2024
Amount
Distribution Wiring Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe (for horizontal & vertical run in wall and celing portion through prelaid polythen pipe) complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish a) 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC .Avrg Run 9 Mtr. [PWD/GS PageE10 Item No.: 3/a]
Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish On Board [PWD/GS PageE15 Item No.: 4]
Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC [PWD/GS Page:E14 Item No.: 1/a]
Finishing of the PVC insulated wire ends by socketing with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC [PWD/GS Page:F-5 Item: 9]
Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [PWD/GS Page: E-6 Item No.: 22]
Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cuwire and earth continuity wire etc. [PWD/GS Page: E19 Item -17]
Installation,Testing & Commissioning of 1/1.5/2/2.5 Ton AC macine complete with outdoor condensing unit on suitable size Iron angle/powder coated bracket & indoor cooling unit on wall with suitable bracket. Rate is inclusive of cutting wall, making holes and mending good the damages. SENBEC/25 of 23-24 (NS)
Supply and drawing 5/8'' & 1/4'' copper refrigerent pipes with 9mm thick nitrile rubber insulation along with all accessories on the surface of wall SENBEC/25 of 23-24 (NS)
Supply and drawing copper communication & controlling cable of following size --4 core 2.5 Sq mm PVC insulated copper cable(Make: Polycab/Finolex/Havells/KEI) SENBEC/68 of 23-24 (NS)
Supply and fixing 20 mm Hard PVC pipe(heavy type) for water drainage of (NS)
Supply and drawing of 1.1 kV grade 3 Core 4 Sqmm PVC insulated copper cable through 20 mm PVC Rigid conduit as required as per direction of EIC (NS)
Lights S&D single 4ft LED commercial tube light fitting(Philips-Cat.No. TMC50 1P 1xLED 22W P3241/Crompton Make IGP161LT8-16 1xT8 fiiting & Crysta model LTT8-20 LED tube /Equivalent as per direction of EIC) incl. 4ft 20W LED tube (Philips Cat. No 1200mm 18W865 t8 I-2100lm/Equivalent Crompton/Havells)Suitable for 240V,50Hz (As per EIC) SENBEC/121 of 23-24 (NS)
S&D double 4ft LED commercial tube light fitting(Philips-Cat.No. TMC50 1P 2xLED 22W P3241/EquivalentCrompton/Havells) incl. Double 4ft 20W LED tube(Philips Cat. No 1200mm 18W865 t8 I-2100lm/Crompton Make ECO-I Model IGP161LT8-16 2xT8 fiiting & Crysta Model LTT8-20 LED tube /Equivalent as per direction of EIC) Suitable for 240V,50Hz SENBEC/121 of 23-24 (NS)
Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitablesize MS fastener, Ceiling plate, nipples etc. as required [PWD/GS Page: C-2 Item: 14/d]
Compound Light Supply of Al. Ar. Cable Working Voltage up to 1100 Volts (Make: Polycab/ Havells/Kei) of the following sizes 2 Core 6 Sq.mm (NS)
Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [ PWD/GS Page:F-1 Item:2/a]
Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed [PWD/GS Page: F-2 Item: 1/a]
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 2 Core 6 Sq mm [ PWD/GS Page:F-4 Item:7]
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 Core 6 Sq mm [ PWD/GS Page:F-5 Item:8/b]
Supply & fixing Sintex loop box of size 250 x 200 x 105 (Syntex: GSJB-2520) with half round clamp on pole and supply & fixing a best quality 32A, 4-pole barrier terminal and 6A SP MCB inside it including all accessories. Cat and SE (MF) (NS)
Supply and fixing of outdoor type LED street light fittings with pressure die cast Aluminium body with toughened glass and high power LED's with secondary optics and IP66 protection. 10 KV SPD included efficacy greater than equal 110/120 LPW[Make:Crompton CRP-409-70-57-SL-GL-NSG/Equivelent Jaguar/Philips] Cat and SE (MF (NS)
Supply & fixing of single arm header assembly made with 100mm dia GI pipe Jacket of 30 cm long with 1.5 mtr. long 40mm dia GI pipe bracket duly welded with top cap at an angle of 110 degree with the vertical incl. 12 mm dia full threaded through nuts-bolts and 3 nos. supporting nut-bolts etc. including necessary painting as per direction of EIC. SENBEC/68 of 23-24 (NS)
Supply & fixing of double arm header( angle between two arm is as per direction of EIC) assembly made with 100mm dia GI pipe Jacket of 3 0cm long with 1.5 mtr. long 40mm dia GI pipe bracket duly welded with top cap at an angle of 110 degree with the vertical incl. 12 mm dia full threaded through nuts-bolts and 3 nos. supporting nut-bolts etc. including necessary painting as per direction of EIC. (NS)
Supply and delivery of LED Street Light(230vac, 45 Watt, 5500K, IP 66, THD<10%, bult in 2.5KV SPD) with all necessary connection.[Make: PHILIPS: BRP 052 LED 045 CW SLMR FG S1 PSU GR/ CROMPTON:-TRP-409-45-57-SL-GL-NSG/ JAGUAR] (NS)
Fixing only outdoor / street light type fluorescent light fitting or MV/LED light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. [ PWD/GS Page:C-3 Item:18]
SITC of Glow Sign Board (Size as per letters & design x6'' depth) made from 40x40x5mm 40x5mm MS flat having the provision for opening front side by 25x25x5mm MS angle, 3 nos hinges duly welded. There will be vertical support in each 3t length and as per direction of EIC. The entire board should be painted with one coat of synthetic enamel paint over one coat of RO White primer.The front and side facia of the board is to be made with 2mm thik PVC sheet of export quality having suitable size and to be fixed by requied SS screws. The back side of the board should be enclosed by 20 sWG GI SHEET. S & F 25X25X6 mm aluminiun angle by SS Screws at peripheri of the board. The matter is to be incripted on a whole best quality venyle sheet as per approved size, colour & matter which will be pasted properly over the PVC sheet. Inscripton of the board will be provided at the time of layout. Demo incription should be approved by EIC befor finalization, |Installation the same Glow sign board at suitable place by making suitable sized RCC muffing & neet cement finishing ete. with two nos 32x32x6 mm MS angle iron bracket for support on the back side rigidly grouted or drilling for 1.01 support on the back side rigidly grouted or drilling hole for protection support on the back side ngdly grouted or drilling hole for protection support bv heavy type screw/nuts & cement net finish etc. & paintin8 SENBEC /117 of 23-24 (NS)
S&F 240V, 4ft. 18/20 Watt 2100 lm LED Tube light inside the Glow Sign Board including making entire conection with 3x1.5 sq mm standred copper wire through flexible PVC pipe or suitable size sleeve for proper illumination of the Glow Sign Board from insideas per direction of EIC [Make: Philips/Crompton/Wipro] SENBEC/117 of 23-24,
Earthing Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire, with an average depth of 3.65 Mts. below the ground level (For soft Soil: ISI-Medium GI pipe) [PWD/GS Page No.: G-1 Item No.:2/a]
Excavation of soil for installation of Earth Electrode and filling & ramming. (Soft Soil) [PWD/GS Page: G-1 Item:1]
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe [PWD/GS Page: G-2 Item:3/a]
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [PWD/GS Page: G-2 Item:4/a]
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages a) Solid GI wire---No. 6 SWG [PWD/GS Page: G-2 Item:5/a(ii)]
THE ELECTRIC EMPORIUM
KISHORI CONSTRUCTION
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .