Const. of Sports Facilitation in Arjun Stadium at Jind (Pdg. Security Light High Mast only).

Amount

Moulded case Circuit breakers

31.12 © Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections.

31.12 c (i) 15 amp.to 60 amp. 415 V ,10 KA 3-phase

Miniature Circuit Breaker and Isolator

31.17 Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections.

(a) Miniature circuit breakers of 9 KA breaking capacity

31.17a) (ii) SP MCB of 9 KA breaking capacity 6 amp. to 32 amp

31.22 Earthing

31.22(i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required

31.22(ii) Extra for using salt and charcoal / coke for pipe earth electrode as required

31.22(xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required

31.26 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections

31.26 (xIi) Ard. 25 Sq. mm 4 Core Cable

31.26 (xxxix) Ard. 10 Sq. mm 4 Core Cable

31.30 (IV) Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangemrnt , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections

Pedestal .

Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:-

31.33 (ii) M.S.pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level

31.4 Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe .

31.40 (i) Size 1.5 sqmm ( 3/0.81 )

31.48 Supply and erection of MS Saddle and clamps duly galvanised , on wall / RCC parapit for fixing underground cable at a distance of 0.60 metre center to center fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work.

31.67 Supply and erection of mark double walled corrugated (DWC) HDPE pipe laid 1Mtr. Below ground level including diging and refilling of earth including cost of sutiable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. i) HDPE pipe 63/50 mm outer dia/inner dia

31.83 (iii) Supply, installation, Testing and commissioning of 20 Mtr. long High Mastmanufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two)section hot dip, galvanized inside and outside in single dip, suitable for windvelocity as per IS 875 Part-3 suitable for 9/12 Nos. Luminaire loading fullymotorized (power tool) with starter & cable complete along with standardaccessories supplied by the manufacturer with 3 nos. steel wire rope doubledrum system and twin dome aviation light with LED without foundation butincluding cost of set of foundation nut and bolts, installation at site complete inall respect upto entire satisfaction of Engineer-in-Charge.

Thickness of Top Section = 3mm (Minimum) Bottom Section =4mm (Minimum

Top Dia = 150mm Bottom Dia = 460mm

Thickness of Galvanization = Top = 65micron (Min.) Bottom = 85micron (Min.)

M.R. items

N.S - 1 Supply and Erection of LED flood light fitting of Havells make JETA IRIS PLUS FL 250 W LED or its equivalent model of Wipro make LF20-342-060-57-xx / Philips make BVP 410 LED 255CW HE SY 20 FG 53XTFCwith pressure die cast alluminium housing, IP-65 reflector and enclosed with toughened glass with all accessories as supplied by the manufacturer including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

N.S - 2 Supply and Erection of LED flood light fitting Havells Make JETA-AIRISFLS150W or its equivalent model of Wipro LF20-192-060-57-XX / Philips BVP 122 LED 146 CW FLNB FG XTFC / with pressure die cast alluminium housing, IP-66 reflector and enclosed with toughened glass with all accessories as supplied by the manufacturer including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

N.S - 3 Construction of RCC foundation for 20 mtr. high mast complete in all respect as per the appended design including the cost of digging sand filling 6" lean concrete 1:8:16 / bricks souling, Bar binding cement concret (M-20) shuttering, fixing of foundation bolts, refilling, carrying and erection of High Mast on foundation including petty material to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. (Foundation bolts and template to be supplied by department).

N.S - 4 Supply and erection of 32/63 Amp. 3 Phase automatic time switch of L&T make alongwith contactor of required capacity of L&T make movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechargeable nickel cadium cell for 150 hours in the event of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work.

N.S - 5 Supply and erection of 0.3 KVA capacity inverter with SMF battery for aviation light in existing panel including the cost of labour charges and connections and petty material etc. for complete in all respect upto the entire satisfaction of Engineer-in-charge of work. Make of Invertor :- Lumineous / Microtek / Sukam - Make of Battery: Exide / Amron.

Sh. Sombir Prop., Panchal Electrical