PROVISION OF CARD ROOM AT OFFICERS MESS OF HQ INF DIV AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R-II UNDER GE PANAGARH

Amount

Excavation over areas in soft/loose soil n.exc 1.5 m in depth; for foundation, etc. and getting out complete all as specified and directed.

Excavation in trenches in any type of soil exc 1.5 m but n.exc 3.0m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n.exc 10 sq m on plan and getting out complete all as specified and directed.

Removing surplus excavated spoil/earth to a distance not exc 50M and deposited where directed at a level not exc.1.5 M above the starting point complete all as specified and directed.

Returning filling in soft /loose excavated soil including spreading leveling watering and well ramming in layers not exceeding 25 CM complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) as foundation and mass filling complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concret complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm stone aggregate Walls, retaining walls, basement walls, ballast walls and the like;any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface of concrete complete all as specified and directed.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed.

M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

M&L for 200 mm thick Kankar or laterite, (mixing of fly ash, clinker and stone dust in the proportion of of 1:3:6 ie 10% fly ash, 30% clinker and 60% stone dust) spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

M&L for broken stone hardcore of guage n.exc 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for Machine pressed precast pre-polished coloured concrete interlocking paver block any shape and size with grey cement and no pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed.

Excavation in trenches in soft/loose soil n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n.exc 10 sq m on plan and getting out complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate Columns, pillars, piers, posts and struts complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at nctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.Pbrass/ stainless steel screws, all complete as per architectural drawings and the directions of Engr-in-Charge

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-chargeand the directions of Engineer-in-Charge.complete all as specified complete all as specified and directed.

M&L for brick work with fly ash bricks old size straight or curved on plan to any radius exc 6m mean radius build in CM (1:6) complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work finished even and smoothh with out using extra cement complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces of size 350x250x7mm/450x350x7mm thick quality not less than group II, straight edge, , as in skirting , dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick rendering in cement mortar (1:4), complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for preparation of newly plastered surfaces of wall & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in Sub base or base course finished even annd fair complete all as specified and directed.

M&L for cement concrete type B1 (1:2:4) with nominal reiforcement (using 20mm graded stone aggregate) 75 mm thick as in floor finished even and rough complete all as specified and directed. (Note:- Reinforcement will be measured and paid separately)

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors etc , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including dismantling of floor hearth or wall tiling incl cement martar bedding complete all as specified. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L Green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following typesnt with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick Screed bed or backing coat for laying floor finishes in CM 1:6 complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

S&F 10mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required. complete all as specified and directed.

S&F roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F mild steel screw bolts (machine made)with hexagonal or square heads at one end and screw other .and each screw end to be fixed with washers and nut exc 5 cm but n.exc 10 cm long of dia 11 to 15mm complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmen complete all as specified and directed.

M&L for Two coats of syntetic enamel paint on new steel surface over a coat of red oxide primer including preparation of new surfaces complete all as specified and directed.

S&F Pre-painted mangalore pattern corrugated galvalume aluminum zinc coating @150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F for Pre-painted galvalume aluminum zinc coating @150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of sheet complete all as specified. as specified including dismantling of sheet complete all as specified.

S&F SS Double Handle of size 250mm long fixed in toughned glass door complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

M&L for 300 mm thick Kankar or laterite, spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

M&L for Cement Concrete, 1:2:4, type B1 (using 20mm graded stone aggregate) as in bed block, coping, lintel upto 1.50 m span, cills, kerbs etc complete all as specified and directed.

M&L for 40 mm cement concrete type B1 (1:2:4) (using 20mm graded stone ggregate) as in receiving floor finished complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B0 using 12.50mm graded crushed stone aggregate as in leveling course complete all as specified and directed.

M&L for cement concrete parking tiles with mixture of grey cement and pigment thick, over & including 15 mm thick cement mortar (1:6) screed, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M&L for Cement Concrete, 1:2:4, type B1 (using 20mm graded stone aggregate) as in bed block, coping ,lintel upto 1.50 m span, cills, kerbs etc complete all as specified and directed.

Excavation in trenches n.exc 1.5m deep and n.exc 1.5m in wide trenches incl getting out in any type of soil complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate Columns, pillars, piers, posts and struts complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface of concrete complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. for fair finished surfaces of concrete complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.® complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:3) finished even and fair for receiving tiles complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing (FE 410-W-Gde-250A) complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of zinc chromate primer complete all as specified and directed.

E/M Portion Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply and laying for cable in trenches or passing through pipe, XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable with stranded aluminium conductor for 1100 volts grade cross sectional area 10 sqmm 2 core complete all as specified and directed.

Excavating in Trenches not exc 1.50 mtr wide and n.exc. 1.50 mtr in depth, getting out in Soft / Loose Soil, complete all as specified and as directed.

M&L Sand Cushioning (dry) in Trenches for protec-tion of UG Cables (below, above and around the UG Cable laid in Trenches) of 230mm Spread thick -ness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. (Note : For the purpose of Payment, Punned thick-ness of Sand Cushioning only shall be Measured and Paid ).

M&L for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of UG cable, complete all as specified and as directed.

S&F Cable Junction Box 200X160X98mm in size, made out of thermoplastic, having IP 65 protection for outdoor installation fixed with 4 way bakelite cable terminals including 03 Nos polymide gland with check nut (M-32 -02 No & M-25 -01 No) fixed on poles with Aluminium clamps of size 25x3mm, nuts, bolts, washers etc. including taking out of old unserviceable cable junction box complete all as specified and as directed. Make : Cat No. K-8250 of HENSEL or equivalent model in SPELSBERG/Sintex.

S&F 40 mm High density polyethylene pipe (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed .

S&F LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed

Supply and passing through steel tubler pole/service connection, 1100 volts grade multicore round insulated copper conductor and sheathed flexible cable,multistranded, three core of nominal cross sectonal area 1.5 Sq mm complete all as specified and as directed.

Supply and laying for cable in trenches or passing through pipe, XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable with stranded aluminium conductor for 1100 volts grade cross sectional area 10 sqmm 4 core complete all as specified and directed .

Supply and laying for cable in trenches or passing through pipe, XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable with stranded aluminium conductor for 1100 volts grade cross sectional area 70 sqmm 3.5 core complete all as specified and directed .

Supply and fixing/laying 40mm bore, steel tubings,light grade,galvanised with all fitting laid across road , in trenches or across PCC drain or along electric pole or floor/wall etc for protection of cable complete all as specified and as directe

Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) complete all as specified and directed.

Labour only for Horizontal Boring for Passing Protection Pipe up to 80mm Bore (dia), under Road /Foot Path, not exc. 10.00 mtr in a Single Length, complete all as specified and as directed. Note : Pipe to be measured separately.

M&L for PCC 1:3:6 type C2 (using 40 mm graded aggregate) as in foundation for pole etc complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded aggregate) as in coping for pole including form work and finishing the surfaces even and smooth etc complete all as specified and as directed.

S&F single arm bracket made of 40mm dia 1.0mtr long for security light ,with mounting MS clamp of flat iron size 25X5 mm of suitable length 02 pairs including nut bolts etc of suitable size and painting to MS clamp with two coats of aluminium paints over a coat of red oxide metal primer all as specified and directed by Engr-In-charge.

S&F Cable Junction Box 200X160X98mm in size, made out of thermoplastic, having IP 65 protection for outdoor installation fixed with 4 way bakelite cable terminals including 03 Nos polymide gland with check nut (M-32 -02 No & M-25 -01 No) fixed on poles with Aluminium clamps of size 25x3mm, nuts, bolts, washers etc. complete all as specified and as directed. Make : Cat No. K-8250 of HENSEL or equivalent model in SPELSBERG/Sintex.

S&F 40 mm High density polyethylene pipe (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed .

S&F flame proof SPN 4 Way,FLP/WP lighting Distribution panel Incominig-MCB,2P,16 Amp/25A-01No, outgoing-MCB 1P 6 Amp/10Amp-02 No with complete internal bus bar & wiring upto terminals complete all as specified and as directed by Engr-in-Charge.

M&L for earthing complete with MS galvanized plate of size 60cmx60cmx6mm as earth electrode , buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron/welding or steel all as shown in electrical plate No 3 in SSR Part I of 2009 connected to earthing test point all as specified complete with excavation & earth work, PCC pit with 50mm thick RCC cover/CI /MS cover having suitable handle (10mm MS Rod) 20mm dia GI medium grade watering pipe with GI funnel with wire mesh 40mm bore GI pipe medium grade ISI marked) for protection of earth lead conductor and testing on completion complete all as specified and as directed by Engr-in-Charge.

M&L for earthing complete with MS galvanized plate of size 60cmx60cmx6mm as earth electrode , buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised iron earth lead wire of dia 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR Part I of 2009 connected to earting test point all as specified complete with excavation & earth work, PCC pit with 50mm thick RCC cover having suitable handle (10mm MS Rod) 20mm dia GI medium grade watering pipe with GI funnel with wire mesh 40mm bore GI pipe medium grade ISI marked) for protection of earth lead conductor and testing on completion complete all as specified and as directed by Engr-in-Charge.

M/S S M ENTERPRISE

M/S TILKU ENTERPRISE

N B CONSTRUCTION

SINGH CONSTRUCTION

SANJAY KUMAR SUPAN

S.P.S. SUPPLIERS

M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION

BISWAS ENTERPRISE