REPAIR TO PCC FLOORING, KOTA STONE AND TILLING AT AF STN MANAURI

Amount

Taking down cement plaster on brick / stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc & all as specified & directed.

M & L rendering 15mm thick cement plaster 1:6 on fair faces of brickwork or concrete surface and finishing even and smooth without using extra cement all as specified and directed

M & L for preparation of new surfaces and applying 2 coats of oil bound distemper over a coat of primer all as specified and directed.

M & L for rendering 15mm thick in cement plaster 1:4 (@ 3% by weight of cement) on fair faces of brickwork or concrete surface alongwith WPC and finishing even and smooth without using extra cement all as specified and directed Note:-WPC shall be measured and paid separately as supply only under relevant item of this schedule.

Supply only integral water proofing compound

M&L for preparing of new surface of wall and apply two coat of cement base paint over a coat of primer complete all as specified and directed by the Engineer-in-Charge.

M&L for applying three coats of white wash on newly surfaces of wall including cornics complete all as specified and directed by the Engineer-in-Charge.

Demolition of brick work built in cement mortar including all quoions, arches pillar etc complete all as specified and directed.

M & L for brick work with subclass “B” Old size bricks, straight or curved on plan exceeding 6 m mean radius built in cement sand mortar in 1:6 complete all as specified & directed.

Demolition of Cement Concrete [Un-reinforced] in ground floors & paving not exceeding 15 cm thickness [below or above ground level] complete all as specified & directed.

M&L for 75mm thick type D-2, PCC 1:4:8 (40mm graded stone aggregate) finished even and smooth and using extra cement etc complete all as specified nd directed by Engr-in-charge.

M&L for 40mm thick cement concrete, type B-1, 1:2:4 (using 20mm graded crushed stone aggregate), as in floor surface finished even a smooth with using extra cement complete and as directed.

Dismantling stone slabs floor, hearth or wall tilling including cement mortar bedding (but not backing) rubbish off premises etc complete all as specified and directed.

M&L for 18-22mm thick machine cut pre-polished kota stone slab (550x550mm) flooring set and jointed in neat cement slurry, pointed with grey cement slurry mixed with pigment to match the shade of the slab complete including rubbing and polishing complete over and including 20mm thick cement and sand mortar (1:6) as bedding layer. Note:- Quoted rate shall deem to included cost of bedding layer.

M&L for 18-22mm thick machine cut pre-polished kota stone slab in tread and riser of steps, skirting, dado and pillar, set and jointed in neat cement slurry, pointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10mm thick cement and sand mortar (1:3) backing /bedding coat including rubbing and polishing complete. Note:- Quoted rate shall deem to included cost of bedding layer.

Dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the premises complete all as specified

M & L for 7 to 8 mm thick joint free non-skid ceramic coloured tiles (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L for 7 to 8 mm thick joint free non-skid ceramic coloured tiles (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting /dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M & L for glazed ceramic coloured tiles size 350x 250x 7mm / 450X 350X 7mm thick as in vertical surface and dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed by Engr-in-charge.

M&L Glazed ceramic coloured tile in vertical surface of size 300 mm x 200 x mm x 6-7mm thick on vertical surface such as dado, skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick backig coat in cement mortar 1:4. complete as specified & directed by Engineer-in-Charge.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ.

Pleiad Complex On

RK Enterprises

RK ENTERPRISES

Minakshi Construction

M/S R S Traders

shubham construction

HIMANSHU TRADERS

GITANSH CONSTRUCTION CO.

m/s neeraj kumar shukla

ASHWANI BUILDERS & SUPPLIERS

M/S Garg Sons