Renovation of Fire Fighting works and replacement of 02 nos lifts at IIFT Campus, Qutub Institutional Area, New Delhi.

Total Amount (inclusive of GST) 19666943.00

33 5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced

cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland

Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability

and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage

for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of

the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum

specified cement content in design mix shall be payable separately. In case the cement content in design

mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to

either re-design the mix or bear the cost of extra cement.

5.33.2.1 Above Plinth Level - Concrete of M25 grade with minimum cement content of 330 kg /cum cum 5 10080.15 50400.75

34 5.22.A Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 100 89.65 8965.00

35 10.16 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting,

hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and

bolted with special shaped washers etc. complete.

10.16.1 Hot finished welded type tubes kg 100 154.90 15490.00

36 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the

surface even and smooth complete.

Fire Fighting Works

S.NO. NS/DSR NO. DESCRIPTION OF ITEM UNIT QTY RATE (RS.) AMOUNT DSR (RS.) AMOUNT NS (RS.)

37 13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

13.43.1 Water thinnable cement primer

38 13.44.1 Finishing walls with water proofing cement paint of required shade : 13.44.1 New work (Two or more coats

applied @ 3.84 kg/10 sqm) Sqm 50 97.60 4880.00

TOTAL SCHEDULED ITEMS

B NON SCHEDULED ITEMS

31 MR Providing and fixing weather proof standard hose cabinet ( 900mm x 750mm x 400mm ) out door type

suitable for accomodating yard hydrant made of 2.0 mm thick Ms steel having central opening glazed door

including necessary locking arrangements painting two coat of primer and two coats of postal red enemal

paint suitable for housing 2 nos. canvas hose pipe, landing valve and branch pipe with provision of fixing/ Each 15 6579.24 98688.62

placement of hose & branch pipe (the cabinet shall be floor mounted on suitable raised platform). The

shutters are to be locable type. The words "Hose Cabinet" to be painted on the box.

32 MR Providing and fixing fire hose cabinet two third glazed door shutter and frame with hold fasts frame

fabricated from 40x40x5mm and shutter from 35x35x5mm MS angle, 2100 mm high 1200 mm wide with

locking arrangement, 4 mm thick glass with 1.6mm MS sheet with flats including all accessories, painting Each 16 8175.94 130814.98

with one coat of steel primer and two coats of postel red enamel paint. (The words "Hose Cabinet" to be

printed on the box).

33 MR Supply, Installation, Testing and Commissioning of 100 mm dia Bourden type, Stainless Steel dial type

Pressure Gauge including brass isolation valve and siphon pipe having caliberation of 0 - 16 Kg / cm Each 12 632.42 7589.00

34 MR Supplying and Fixing of Fire Man's axe with heavy insulated rubber as per standard conforming to IS 926

35 MR Providing and fixing puddle flange including 45 cm long GI pipe piece welded / threaded with MS plates with

both end screwed.

MS plate 450x450x6 mm thick for 100 mm dia, pipe Each 2 1952.92 3905.84

36 MR Providing and fixing double acting air release valve of approved quality to be fixed on the top of hydrant.

37 MR Fabricating, Supplying, Installation, Testing and Commissioning Air Vessel of continuous welded

construction with flanged discharge header in pump house fabricated out of 10 mm thick dished ends and

8 mm thick MS sheet, Air Release Valve, complete with drain arrangement with 25 mm dia gun metal

wheel valve complete with all accessories etc. as required of the following sizes

2 Metre high and 450 mm dia suitable to operate Jockey Pump, Main Fire Pump & Diesel Engine Driven

Fire Pump Each 3 33783.26 101349.78

FIRE EXTINGUISHERS

38 Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel

cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve

bearing IS:3224/15683 mark internal discharge tube, 1 meter long high pressure discharge hose, non

conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed.

a) NS 4.5kg capacity cylinder Each 40.0 6101.60 244063.91

Fire Fighting Works

S.NO. NS/DSR NO. DESCRIPTION OF ITEM UNIT QTY RATE (RS.) AMOUNT DSR (RS.) AMOUNT NS (RS.)

39 Providing and fixing portable fire extinguisher, dry powder type (stored pressure type) with cylinder

NS initially fully charged with dry powder (ABC type) of 4 Kg. complete with standard discharge valve with tube, Each 10.0 2375.98 23759.77

CI bracket for wall mounting etc. conforming IS : 15683:2006

40 NS Modular automatic Salcon II clean gas based stored pressure fire extinguisher HFC -Base

41 modular ceiling type clean agent FE 36 Clean agent type fire extinguisher ASPER IS 15683:2006 complete

in all respects

42 Supply, installation, testing and commissioning of 20 Passengers Lift (1360 KG), with 9 stops and 9

openings (B+G+7), Gearless machine in machine room located directly above lift well and Stainless-Steel

Silver Sky finish Car with Square LED for lighting, 20mm granite/ marble flooding, Natural mirror of half car

height and full car width provided on rear wall of car, Round handrail in Stainless steel finish provided on

rear wall of car, Car operating panel at Half height - surface mounted and dimension of car is 2000 mm

wide x 1550mm deep x 2200 mm high and door opening size of 1000 mm wide x 2000mm high, complete

as per the direction of the Engineer in Charge. The Shop Drawings is to be got approved from EIC by the

contrcator before commencing this work. These rates are inclusive for obtaining statuary license from

concern authority by the contrctor. Note: The cost of Dismantling of Old Lift is inclusive in this cost and

nothing extra shall be paid on this account.

43 Buy Back Value of Old Lift and its accesries, spared after dismatling and its replacement. The loading,

NS unloading and transportation etc. of this item are to be done by the contractor at its own cost. Each 2.0 -150000.00 -300000.00

B TOTAL NON SCHEDULED ITEMS 8876139.16

Fire Fighting Works

Renovation of Fire Fighting works and replacement of 02 nos lifts at IIFT Campus, Qutub Institutional Area, New Delhi.

New Hostel Teaching

S.NO. NS/DSR NO. DESCRIPTION OF ITEM UNIT QTY RATE (RS.) AMOUNT DSR (RS.) AMOUNT NS (RS.)

A) FIRE FIGHTING ITEMS

3 3 Supplying, installation, testing and commissioning of electric driven pressurisation pump

suitable for automatic operation and consisting of following,

complete in all respects, as required : (Jockey Pump)

a) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless

steel shaft, mechanical seal conforming to IS : 1520.

b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase

50 Hz AC supply with IP 55 class of protection for enclosure,

horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.

c) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.

d) Suitable cement concrete foundation duly plastered and with anti vibration pads.

3.2 Capacity 180LPM and Head 70 Metres set 1 102391.00 102391.00

4 Supplying, installation, testing and commissioning of electric driven terrace pump suitable for

automatic operation and consisting of following, complete in all

respects, as required: (Terrace Pump)

a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller

with stainless steel shaft, mechanical confirming to IS : 1520

b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3

phase, 50 Hz, AC supply with IP55 class of protection for enclosure,

horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.

M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.

Suitable cement concrete foundation duly plastered and with anti vibration pads.

4.1 900 lpm at 35 m Head (1Working +1stand by) set 1 100946.00 100946.00

1 6 Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS

1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground

including welding, excavation & providing cement concrete blocks as supports, anticorrosive

treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes

complete as required.

6.1 200 mm. dia (wall thickness = 6.3 mm) m 25.0 3169.00 79225.00

2 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS

3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets

etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with

two or more coats of synthetic enamel paint of required shade complete as required :.)

7.9 200 mm dia (wall thickness 6.3 mm) RM 50.00 2,926.00 146300.00

Fire Fighting Works

S.NO. NS/DSR NO. DESCRIPTION OF ITEM UNIT QTY RATE (RS.) AMOUNT DSR (RS.) AMOUNT NS (RS.)

3 Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia

instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked,

conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :

10.2 Single headed Stainless steel set 11 5,987.00 65857.00

4 16 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female

couplings duly bound with GI wire, rivets etc. conforming to IS 636

(type-A) as required :

16.2 Stainless Steel (Grade 304) set 22 4434.00 97548.00

5 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red,

17.0 conforming to IS 884 complete with the following as required

20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:

20 mm nominal internal dia gun metal globe valve & nozzle

Drum and brackets for fixing the equimpments on wall.

Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket

6 18 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter

size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe

coupling as required :

18.2 Stainless Steel (Grade 304) Each 22.0 1648.00 36256.00

7 19 Supplying and fixing of fire brigade connection of cast iron body with gun metal male

instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe

connection conforming to IS 904 as required

8 11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with

bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as required :

a) 11.3 65mm dia

d 11.6 150 mm dia

9 14 Providing, installation, testing and commissioning of non-return valve of following sizes

confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,

washers etc.as required

a) 14.5 100 mm dia

b) 14.7 150 mm dia

10 20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height

with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia

gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic

enamel paint of approved shade

11 22 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

Fire Fighting Works

S.NO. NS/DSR NO. DESCRIPTION OF ITEM UNIT QTY RATE (RS.) AMOUNT DSR (RS.) AMOUNT NS (RS.)

12 24.0 Providing, fixing, testing & commissioning of installation control valve of cast iron body,

brass/bronze working parts comprising of water motoralarm, bronze seat clapper, clapper arm

and hydraulically driven mechanical gong bell to sound

continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency

releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control

box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as

13 21 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68

degree centigrade with required accessories

21.1 Pendent Sprinkler Each 85 484.00 41140.00

21.3 side wall extended throw 20mm dia 68 C, Chrome plated Each 10 579.00 5790.00

14 Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless

steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test

pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head

(Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar

of following sizes complete as

15 Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia

instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked,

conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :

10.2 Single headed Stainless steel set 16.0 5987.00 95792.00

16 29 Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white

finish UL Listed or FM approved complete as required.

17 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

18.17.6 80 mm nominal bore

18 18.18 Providing and fixing ball valve (brass) of approved quality , High or low

pressure, with plastic floats complete :

18.18.3 25 mm nominal bore Each 16 399.15 6386.40

19 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end)

18.19.6 80 mm nominal bore

20 18.59 Providing & fixing CI double acting air valve of approved quality with bolts, nuts, rubber insertions

etc. (The tail pieces if required will be paid separately).

A TOTAL SCHEDULED ITEMS 2986725.15

NON SCHEDULED ITEMS

Fire Fighting Works

S.NO. NS/DSR NO. DESCRIPTION OF ITEM UNIT QTY RATE (RS.) AMOUNT DSR (RS.) AMOUNT NS (RS.)

21 MR Providing and fixing weather proof standard hose cabinet ( 900mm x 750mm x 400mm ) out

door type suitable for accomodating yard hydrant made of 2.0 mm thick Ms steel having central

opening glazed door including necessary locking arrangements painting two coat of primer and

two coats of postal red enemal paint suitable for housing 2 nos. canvas hose pipe, landing valve

and branch pipe with provision of fixing/ placement of hose & branch pipe (the cabinet shall be

floor mounted on suitable raised platform). The shutters are to be locable type. The words

"Hose Cabinet" to be painted on the box.

22 MR Providing and fixing fire hose cabinet two third glazed door shutter and frame with hold fasts

frame fabricated from 40x40x5mm and shutter from 35x35x5mm MS angle, 2100 mm high 1200

mm wide with locking arrangement, 4 mm thick glass with 1.6mm MS sheet with flats including

all accessories, painting with one coat of steel primer and two coats of postel red enamel paint. Each 16.0 8175.94 130814.98

(The words "Hose Cabinet" to be printed on the box).

23 MR Supply, Installation, Testing and Commissioning of 100 mm dia Bourden type, Stainless Steel

dial type Pressure Gauge including brass isolation valve and siphon pipe having caliberation of

24 MR Supplying and Fixing of Fire Man's axe with heavy insulated rubber as per standard conforming

25 MR Providing and fixing puddle flange including 45 cm long GI pipe piece welded / threaded with MS

plates with both end screwed.

MS plate 450x450x6 mm thick for 100 mm dia, pipe Each 2 1952.92 3905.84

26 MR Providing and fixing double acting air release valve of approved quality to be fixed on the top of

FIRE EXTINGUISHERS

27 Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high

pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives

Nagpur, wheel type valve bearing IS:3224/15683 mark internal discharge tube, 1 meter long high

pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS:

making fixed to wall as directed.

a) NS 4.5kg capacity cylinder Each 16.0 6101.60 97625.56

28 Providing and fixing portable fire extinguisher, dry powder type (stored pressure type) with

cylinder initially fully charged with dry powder (ABC type) of 4 Kg. complete with standard

discharge valve with tube, CI bracket for wall mounting etc. conforming IS : 15683:2006

30 modular ceiling type clean agent FE 36 Clean agent type fire extinguisher ASPER IS

15683:2006 complete in all respects

B Total of NON -Schedule items 979500.21

Fire Fighting Works

Renovation of Fire Fighting works and replacement of 02 nos lifts at IIFT Campus, Qutub Institutional Area, New Delhi.

S.NO. NS/DSR NO. DESCRIPTION OF ITEM UNIT QTY RATE (RS.) AMOUNT NS (RS.)

A) FIRE FIGHTING ITEMS

1 6 Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS

1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground

including welding, excavation & providing cement concrete blocks as supports, anticorrosive

treatment with coaltar/asphalt tape as perIS 10221, refilling the trench etc. of following sizes

complete as required.

6.1 200 mm. dia (wall thickness = 6.3 mm) m 12 3169.00 38028.00

2 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS

3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets

etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with

two or more coats of synthetic enamel paint

7 of required shade complete as required :.)

7.9 200 mm dia (wall thickness 6.3 mm) RM 20 2,926.00 58520.00

3 Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia

instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked,

conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required

10.2 Single headed Stainless steel set 12 5,987.00 71844.00

4 16 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female

couplings duly bound with GI wire, rivets etc. conforming to IS 636

(type-A) as required :

16.2 Stainless Steel (Grade 304) set 24 4434.00 106416.00

5 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red,

17.0 conforming to IS 884 complete with the following as required

20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:

20 mm nominal internal dia gun metal globe valve & nozzle

Drum and brackets for fixing the equimpments on wall.

Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket set 9.0 8413.00 75717.00

Fire Fighting Works

S.NO. NS/DSR NO. DESCRIPTION OF ITEM UNIT QTY RATE (RS.) AMOUNT NS (RS.)

6 18 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal

diameter size nozzle conforming to IS 903 suitable for instantaneous connection to

interconnect hose pipe coupling as required :

18.2 Stainless Steel (Grade 304) no. 9.0 1648.00 14832.00

7 19 Supplying and fixing of fire brigade connection of cast iron body with gun metal male

instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe

connection conforming to IS 904 as required

8 11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with

bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as required :

9 14 Providing, installation, testing and commissioning of non-return valve of following sizes

confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,

washers etc.as required

10 20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height

with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia

gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic set 1 18009.00 18009.00

enamel paint of approved shade

11 22 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. Each

12 24.0 Providing, fixing, testing & commissioning of installation control valve of cast iron body,

brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm

and hydraulically driven mechanical gong bell to sound continuous alarm when the wet

riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure

switch, cock valve complete with

drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice

plate, gasket etc of follwing sizes as required :

13 21 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating

68 degree centigrade with required accessories

14 21.1 Pendent Sprinkler Each 55 484.00 26620.00

21.3 side wall extended throw 20mm dia 68 C, Chrome plated Each 10 579.00 5790.00

15 Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of

stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175

PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler

head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket,

stockbar of following sizes complete as

Fire Fighting Works

S.NO. NS/DSR NO. DESCRIPTION OF ITEM UNIT QTY RATE (RS.) AMOUNT NS (RS.)

16 Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia

instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked,

conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required

10.2 Single headed Stainless steel set 4.0 5987.00 23948.00

17 29 Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in Each

white finish UL Listed or FM approved complete as required.

18 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

18.17.6 80 mm nominal bore each 4 2,227.60 8910.40

19 18.18 Providing and fixing ball valve (brass) of approved quality , High or low

pressure, with plastic floats complete :

18.18.3 25 mm nominal bore Each 9 399.15 3592.35

20 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end)

18.19.6 80 mm nominal bore

21 18.59 Providing & fixing CI double acting air valve of approved quality with bolts, nuts, rubber

insertions etc. (The tail pieces if required will be paid separately).

TOTAL SCHEDULED ITEMS 1739993.10

NON SCHEDULED ITEMS

22 MR Providing and fixing weather proof standard hose cabinet ( 900mm x 750mm x 400mm ) out

door type suitable for accomodating yard hydrant made of 2.0 mm thick Ms steel having central

opening glazed door including necessary locking arrangements painting two coat of primer

and two coats of postal red enemal paint suitable for housing 2 nos. canvas hose pipe, landing

valve and branch pipe with provision of fixing/ placement of hose & branch pipe (the cabinet

shall be floor mounted on suitable raised platform). The shutters are to be locable type. The

words "Hose Cabinet" to be painted on the box.

23 MR Providing and fixing fire hose cabinet two third glazed door shutter and frame with hold fasts

frame fabricated from 40x40x5mm and shutter from 35x35x5mm MS angle, 2100 mm high

1200 mm wide with locking arrangement, 4 mm thick glass with 1.6mm MS sheet with flats

including all accessories, painting with one coat of steel primer and two coats of postel red Each 9.0 8175.94 73583.43

enamel paint. (The words "Hose Cabinet" to be printed on the box).

24 MR Supply, Installation, Testing and Commissioning of 100 mm dia Bourden type, Stainless Steel

dial type Pressure Gauge including brass isolation valve and siphon pipe having caliberation

Fire Fighting Works

S.NO. NS/DSR NO. DESCRIPTION OF ITEM UNIT QTY RATE (RS.) AMOUNT NS (RS.)

25 MR Supplying and Fixing of Fire Man's axe with heavy insulated rubber as per standard

conforming to IS 926 Each 13.0 489.12 6358.60

26 MR Providing and fixing puddle flange including 45 cm long GI pipe piece welded / threaded with

MS plates with both end screwed.

MS plate 450x450x6 mm thick for 100 mm dia, pipe Each 2 1952.92 3905.84

27 MR Providing and fixing double acting air release valve of approved quality to be fixed on the top of

FIRE EXTINGUISHERS

28 Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high

pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of

explosives Nagpur, wheel type valve bearing IS:3224/15683 mark internal discharge tube, 1

meter long high pressure discharge hose, non conducting horn, suspension bracket, fully

charged bearing IS: making fixed to wall as directed.

a) NS 4.5kg capacity cylinder Each 9.0 6101.60 54914.38

29 Providing and fixing portable fire extinguisher, dry powder type (stored pressure type) with

cylinder initially fully charged with dry powder (ABC type) of 4 Kg. complete with standard

discharge valve with tube, CI bracket for wall mounting etc. conforming IS : 15683:2006

Total of NON -Schedule items 217698.38

Fire Fighting Works