PROVISION OF NEW WORKSHOP BUILDING ALONGWITH ANCILLARY BUILDING AT ARMOUR TECHNOLOGY CENTRE ATC DEVATALAGUTTA OF DMRL HYDERABAD

Amount

Schedule 'A' Part - I (BUILDINGS AND STRUCTURES) This Schedule (contains under mentioned Sl. item Nos. 1.01 to 1.02) are not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only. The tenderer is required to quote their rates in Column 6.

Lumpsum price worked out by the contractor for Construction of workshop building alongwith ancillary building RCC framed structure with RCC framed structure, design mix M-30 grade concrete and PEB roof structure complete all as shown on drawings and as per specification.

Lumpsum price worked out by the contractor for Construction of parking shed (Garrage) with RCC complete all as shown on drawings and as per specification.

Lump sum price worked out by the Contractor for “EARTHWORK / SITE CLEARANCE " as listed in Schedule ‘A’ Part - II representing _______ % ______________ percent Above / Below the lump sum price of Rs.5,19,775.45 inserted by the MES in Schedule ‘A’ Part - II

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - III representing __________ % ____________ percent Above / Below the lump sum price of Rs.31,291.10 inserted by the MES in Schedule ‘A’ Part - III

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - IV representing __________ % ____________ percent Above / Below the lump sum price of Rs.7,08,913.65 inserted by the MES in Schedule ‘A’ Part - IV

Lump sum price worked out by the Contractor for "ROLLING SHUTTER (MOTOR)” as listed in Schedule ‘A’ Part - V representing _______ % __________________ percent Above / Below the lump sum price of Rs.0.00 inserted by the MES in Schedule ‘A’ Part - V

Lump sum price worked out by the Contractor for "ROAD / PATH / CULVERTS & FOOT PATH” as listed in Schedule ‘A’ Part - VI representing _______ % __________________ percent Above / Below the lump sum price of Rs.27,38,215.26 inserted by the MES in Schedule ‘A’ Part - VI

Lump sum price worked out by the Contractor for "SEWAGE DISPOSAL” as listed in Schedule ‘A’ Part - VII representing _______ % __________________ percent Above / Below the lump sum price of Rs.3,42,316.05 inserted by the MES in Schedule ‘A’ Part - VII

Lump sum price worked out by the Contractor for "AREA DRAINAGE / STORM WATER DRAIN” as listed in Schedule ‘A’ Part - VIII representing _______ % __________________ percent Above / Below the lump sum price of Rs.19,75,591.81 inserted by the MES in Schedule ‘A’ Part - VIII

Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - IX representing _______ % _________________ percent Above / Below the lump sum price of Rs.45,810.30 inserted by the MES in Schedule ‘A’ Part - IX

Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - X representing _______ % _________________ percent Above / Below the lump sum price of Rs.13,47,481.37 inserted by the MES in Schedule ‘A’ Part - X

Lump sum price worked out by the Contractor for “FIRE FIGHTING” as listed in Schedule ‘A’ Part - XI representing ______ % _________________ percent Above / Below the lump sum price of Rs.3,74,370.80 inserted by the MES in Schedule ‘A’ Part - XI

Lump sum price worked out by the Contractor for “RO PLANT” as listed in Schedule ‘A’ Part - XII representing ______ % _________________ percent Above / Below the lump sum price of Rs.4,850.00 inserted by the MES in Schedule ‘A’ Part - XII

Lump sum price worked out by the Contractor for “LAN” as listed in Schedule ‘A’ Part - XIII representing ______ % _________________ percent Above / Below the lump sum price of Rs.57,900.00 inserted by the MES in Schedule ‘A’ Part - XIII

Lump sum price worked out by the Contractor for "REFRIGERATOR & AC” as listed in Schedule ‘A’ Part - XIV representing ______ % _________________ percent Above / Below the lump sum price of Rs.4,02,437.46 inserted by the MES in Schedule ‘A’ Part - XIV

Lump sum price worked out by the Contractor for “EOT CRANE” as listed in Schedule ‘A’ Part - XV representing ______ % _________________ percent Above / Below the lump sum price of Rs.3,870.00 inserted by the MES in Schedule ‘A’ Part - XV

Schedule 'A' Part - XVI This Schedule is not prepriced by MES and the prepriced rate indicated in Col - 5 as ₹0.00 indicates this fact only. The tenderer is required to quote their rates in Column 6. This Schedule constitutes Sl. Item Nos. 17.00 to 39.00.

INTERNAL ELECTRIFICATION S&F, fan regulator 240 V AC electronic step type comlete all as specified and directed. Make: CONA / ANCHOR / LEADER.

S&F, ceiling rose, 3 terminals / PVC / polycarbonate, isolated body complete all as specified and directed.

S&F, recess mounted LED high bay light with IP-66 protection pressure die cast body with high power SMD LEDs as light source of luminous efficacy 150lm/watt 120 W, 240V, 5000K CCT, aluminium heat sink alongwith inbuilt electronic driver, wide beam angle, including hanging the fitting with required hook arrangement required at site complete all as specified and directed.

S&F in replacement metal clad plug top 3 pin, 20 Amps ISI marked heavy duty for AC connection cord complete all as specified and directed.

S&F, recess mounted LED luminaire 36W 2' x 2', 5700K CCT, luminous efficacy of not less than 120lm/watt designed for metric false ceiling type or alongwith frame suitable for grid ceiling or similar mounting system with concealed or exposed 'T' sections, glare free light alongwith electronic driver complete with all accessories prewired and connecting up with three core twister flexible copper conductor cable with suitable size including making good to the disturbed portion of ceiling complete all as specified and directed.

EXTERNAL ELECTRIFICATION Supply, install, test & commission of LT panel indoor type, cubicle type as per IS/IEC-61439 for 415 V, 50 Hz rated fault current : 65KA with internal arc containtment dust, vermin proof, weather proof, IP-54 grade of protection, fabricated on 50 x 50 x 5mm thick MS angle iron frame both side opening and looking arrangement including providing aluminium bus bar of capacity 800 Amps rating 40 x 12mm including internal wiring using suitable size not less than 1.5 sqmm FLRS copper conductor cable alongwith ferrules & digital ammeter - 01 No, digital voltmeter - 01 No, CT 400/5-03 Nos. The panel shall be painted with anticorrosive coating and finally epoxy polyster powder coating of siemens grey shade (RAL-7032).

The panel should be mounted on 'C' channel base of required size duly coated with anti corrosive paint. The circuit distribution lines to be marked over the panel using poly venyl reflective stickering (where necessary) complete with following: - Note: The design of panel should be as per switch gear type test certificate / report of OEM should be submitted panel should also to be tested for internal / ARC as per IEC 61641. Incoming MCCB 4P, 400 Amps, 36 KA - 01 No & multi functional meter - 01 No. Outgoing MCCB 4P, 100 Amps, 27 KA - 03 Nos. MCB 4P, 63 Amps, 36 KA - 05 Nos.

S&F, LED Alfa series AIO 40W is made with high efficiency Mono Crystalline Solar PV module, Lithium Ferro Phosphate battery with in-built BMS technology, high efficacy LED, MPPT Solar Charge Controller and aluminium extruded body, specially designed intelligent microwave sensor to control the dimming and brightness of light leads to extend working time. Multi-angle adjustable light module and light arm suitable for installation in different latitude regions. The adjustable range of light source is -20º to +20º and the adjustable range for rotating the arm is -90º to +90º complete all as specified and directed.

S&F, sheet metal MCCB enclosure TPN double door type AC 415 V with MCCB 63 Amps, 4 pole 16 KA as incommer flush to wall including taking down old one complete making good of distructed surface including taking down old one complete all as specified and directed.

S&F in repairs LED 150 watt highbay light fiitting made up of pressure die cast housing with toughened glass and individual LEDs with IP 66 protection, 5700K including fixing to high mast pole / truss with necessary nuts, bolts and washers complete all as specified and directed. Make: Shakti model No. SZHHAMX150 or equivalent in Philips / Crompton Greaves / HAVELLS.

SEWAGE DISPOSAL RCC septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 design mix in wall, base slab, baffle walls and roof slab including beams etc with vent shaft, manhole opening with cover connection etc, complete with effective depth 1.5 m and overall depth 3 m for 50 users complete all as specified and directed.

Soakage well excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M-25 / SFRC cover, interconnection pipes RCC / DWC complete filled with brick bats of size 1.80m dia and 3 m depth complete all as specified and directed.

ROLLING SHUTTER Design, supply, erect, testing & commissioning of motorization including motor & mechanisation eqpt for existing mechanical rolling shutter (any size upto 1MT weight) in one single unit with 1 Ton lifting capacity by replacing the rolling spring assembly with new cylindrical type rolling assembly and chain crank in absence of power complete with ball bearing and springs etc minimum cost of maintenance with single phase push button starter with all connection copper wiring complete, limit switches, control wiring with copper conductor including necessary dismantling / refixing of shutter, addition / alteration civil works complete and including provision of manual operation in case of power failure complete all as specified and directed. Note: The contractor shall submit necessary design calculation, drawings etc., for approval and shall obtain approval before execution of work.

FIRE FIGHTING S&F, stand post made out of MS pipe of size 63/65mm dia heavy grade of 1.2mtr height and providing necessary flanges complete suitable for fire hydrant valve complete all as specified and directed.

S&F, hydrant valve oblique pattern gun metal of size 63/65mm size single outlet with hose coupling adoptor of size 63/65mm size complete all as specified and directed.

S&F, hose box of size 750 x 800 x 250mm outdor type made out of 2mm thick MS sheet with glass frosted doors with cotton synthetic fibre reinforced rubber hose pipe of size of 63mm dia of length 30mtr complete all as specifed and directed.

Jointing of existing DI pipe line of size 150 mm dia for taking branch connections and modifying by the existing DI pipe line 150 mm dia by providing flanges both side of pipe duly screwed and drilled and applying leak proof chemicals at flanges, and including necessary excavation, earth work complete all as specified and directed.

Cutting of existing DI pipe of size 200 mm dia for taking brach connection and screwing including fittings as required at site complete all as specified and directed.

RO PLANT Supply, installation, commissioning of water cooler fully stainless steel, in built RO 10 Ltr electric driven single phase having approx storage and nominal cooling capacity 40/80 Ltrs complete all as specified and directed.

REFRIGERATOR & AC S&F, Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified and directed.

S&F, Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed.

EOT CRANE S&F, double box girder electrically operated EOT 5 ton crane indoor type designed in accordance with ISS-807/1963 and ISS 3177-1965, ISS 4137-1967 and other relevant standards with Span (Centre to center of rail) - 20.00 Mtrs. Height of Lift - 6 Mtrs. Bay Length - 45.0 Mtrs. Duty Class - Class II Medium Duty - M-5 as per IS 807/3177, including VVVF drive with 10% of greep speed, 12mm dia Usha Martin wire rope with Ser No. falls, 6 x 37 best plough steel fiber core R,H.D as per 2266-1976 tensile strength-200 kgs/Mtr. 1) Hoisting Speed : 3.0 M/MIN 2) Cross Travel Speed : 6.0 M/MIN 3) Long Travel Speed : 10.0 M/MIN

Note: (i) Bridge Construction - Double web M.S. plate welded box type construction with adequate stiffeners and diaphram and fushion welded. (ii) End Carriage and LT frame - fabricated out of M.S. section and plates with adequate diaphram’s. (iii) End stoppers shall be provided on either side of the bridge to limit the motion of the trolley and on main LT rails to limit and LT movement. (iv) Full length platform on the driving side shall be provided. These platforms shall be covered fully with anti skid chequered plates and provided with hand rails. (v) DSL System - Shrouded Bus Bar System. (vi) C.T. trolley shall be made of all welded construction fabricated from rolled steel, sections and plates, hoist and cross traverse machineries shall be mounted on this frame. Entire trolley shall be fully covered with anti skid chequered plates and covered all round with safety hand rails.

(vii) Rope Drum to be fabricated out of low carbon steel as per IS : 2062 duly stress relieved of heavy duty seamless pipe construction to accommodate wire rope in single layer. a) Hoist Brake 200 dia Thrustor Brake - Qty - 02 Nos. b) Long Travel Brake 100 Dia x 02 Nos Thrustor Brakes. c) Cross Travel Brake 100 dia Thrustor Brakes. (viii) Forged Heavy Duty Steel standard single shank type plain hook as per IS 3815/3610 (latest). Materials shall be EN3 freely swiveling and supported on thrust bearing 360° swivel hook shall also be provided with spring loaded safety latch.

(ix) Wheels should be double flanged fabricated out of forged steel of EN-9 mounted on double bearings. a) Hoist Motor 10.0 HP; Squirrel cage crane duty b) Long Travel Motor 2.0 HP x 02 Nos; Squirrel cage crane duty c) Cross Travel Motor 1.0 HP; Squirrel cage crane duty (x) Limit Switches: a) Hoisting - Over hoisting / over lowering (Rotary Shunt cam type) b) Long Travel - On both ends of travel (Lever type) c) Cross Travel - On both ends of travel (Lever type)

(xi) Material of Pinion - EN-9 Hardness 250 to 300 BHN Gears - EN-8/9 Hardness 250 BHN (xii) Power Supply - AC 400/440 Volts, 3 Phase, 50 Hz. (xiii) load indication system with maximum load capacity with limit switch (xiv) Testing - Testing of the crane for SWL, Overload and deflection shall be done at site only.

LAN SYSTEM S&F, RJ 11 jack with gang box and outer plate for Telephone connection complete all as specified and directed.

S&F, telephone wire in PVC conduit as required complete all as specified and directed.

Bismi Engineering (BID ID -3132573)

SRC Infra Developers Private Limited (BID ID -3131902)

M/S GDR CONSTRUCTIONS (BID ID -3128843)

Lucky General engineers and Contractors (BID ID -3130307)