Improvements to road SH-122 Maharashtra Border to Sedam taluk Handarki road from km 153.20 to 157.20 km in Chincholi taluk of Kalaburgi District. under 5054 SH Road Improvements for the year 2024-25.

Estimates of Pavement

Providing and fixing of typical PMGSY informatory sign

board with Logo as per MORD specifications and drawing.

i) The board will be a composite unit consisting of three

plates of Aluminium Composite M...

Clearing and grubbing road land including uprooting rank

vegetation, grass, bushes, shrubs, saplings and trees girth up to

300 mm, removal of stumps of trees cut earlier and disposal of

unserviceable ...

Scarifying the existing bituminous road surface to a depth of 50

mm and disposal of scarified material by Mechanical Means using

Hydraulic excavator with in all lifts and lead

Earth work in surface excavation by mechanical means for lowering & leveling

the ground for all works other than foundation in all kinds of soils & upto depth

not exceeding 300mm as per drawing and te...

Loosening, leveling and Compacting original ground supporting

embankment to facilitate placement of first layer of embankment,

scarified to a depth of 150 mm, mixed with water at OMC and then

Construction of Embankment with approved materials deposited at site from

roadway cutting and excavation from drain and foundation of other structures

graded with desired compaction. (Royalty shall be...

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Construction of sub-grade and earthen shoulders with approved

material obtained from borrow pits with all lifts & leads,

transporting to site, spreading, grading to required slope and

compacted to mee...

Construction of Granular Sub-Base of required grading as per

design spreading in uniform layers with motor grader on

prepared surface mixing by mix in place method with front end

loader at OMC and com...

Providing, laying, spreading and compacting graded stone

aggregate to wet mix macadam specification including premixing

the Material with water at OMC in mechanical mix plant carriage

of mixed Materia...

Providing and applying primer coat with SS1 grade Bitumen

Emulsion on prepared surface of granular base including

cleaning of road surface and spraying primer at the rate of 0.70

kg/m2 using mechanica...

Providing and applying tack coat with RS1 Bituminous Emulsion

using emulsion pressure distributor at the rate of 0.25 kg/m2 on

Granular Surface

Providing and laying Dense Graded Bituminous Macadam with

40/60 TPH capacity HMP using crushed aggregates of specified

grading, premixed with bituminous binder VG-30, @ 4.5 per cent

by weight of total...

Providing and laying Bituminous Concrete with 40/60 TPH

capacity hot mix plant using crushed aggregates of specified

grading, premixed with bituminous binder VG-30, @ 5.4 per

cent of mix and filler, t...

Estimate of Traffic Saftey Measures

Providing and erecting direction and place identification retroreflectorised

sign as per IRC:67:2022 made of high intensity

grade sheeting vide clause 801.3, fixed over aluminium

sheeting, 2 mm thick ...

Providing and fixing of retro- reflectorised cautionary,

mandatory and informatory sign as per IRC:67:2022 made

of Class C Type XI retro reflective sheeting fixed over 2 mm

thick aluminium sheeting vi...

Providing and fixing of retro- reflectorised cautionary,

mandatory and informatory sign as per IRC:67:2022 made

of Class C Type XI retro reflective sheeting fixed over 2 mm

thick aluminium sheeting vi...

Providing and fixing of retro- reflectorised cautionary,

mandatory and informatory sign as per IRC:67:2022 made

of Class C Type XI retro reflective sheeting fixed over 2 mm

thick aluminium sheeting vi...

Providing and laying of hot applied thermoplastic compound

2.5 mm thick including reflectorising glass beads @ 250 g/m2

area, thickness of 2.5 mm is exclusive of surface applied glass

beads as per IRC...

Supplying and Fixing of Molded Shank Raised Pavement

Markers / Cat's Eye made of polycarbonate and ABS moulded

body and reflective panels with micro prismatic lens capable of

providing total internal ...

Reinforced cement concrete M15grade kilometre stone of

standard design as per IRC:8-1980, fixing in position including

painting and printing etc Ordinary kilometer stone (precast)

Reinforced cement concrete M15grade kilometre stone of

standard design as per IRC:8-1980, fixing in position including

painting and printing etc 200 m stone (precast)

Providing Speed Breakers/Raised pedestrian crossings in

Trapezoidal section with 2.5 m Top width and transition length

of 0.8 m length and height of 0.1 m as per IRC 99:2018 using

Dense Bituminous Mac...

Reinforced cement concrete M15 grade boundary pillars of

standard design as per IRC:25, fixed in position including

finishing and lettering but excluding painting

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Providing and laying of a reinforced cement concrete pipe duct,

300 mm dia, across the road (new construction), extending

from drain to drain in cuts and toe of slope to toe of slope in fills,

Construction of Two Rows NP4 1000 mm Dia Pipe Culvert Reconst CD At CH 156.25

Dismantling of existing structures like culverts, bridges, retaining

walls and other structure comprising of masonry, cement concrete,

wood work, steel work, including T&P and scaffolding wherever

Removing all type of Hume Pipes and Stacking including Earthwork

and Dismantling of Masonry Works. Above 600 mm to 900 mm dia

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Back filling behind abutment, wing wall and return wall

complete including compaction as per drawing and Technical

Specification Granular material

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of

building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height. T...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Culverts (Head walls) add 8%

Laying Reinforced cement concrete pipe NP4/prestressed

concrete pipe for culverts on first class bedding of granular

material in single row including fixing collar with cement mortar

1:2 but excluding...

Providing and laying boulders apron on river bed for protection

against scour with stone boulders weighing not less than 40 kg

each complete as per drawing and Technical specification. Boulder Laid Dr...

Providing and laying Pitching on slopes laid over prepared

filter media including boulder apron laid dry in front of toe

of embankment complete as per drawing and Technical

specifications Stone/Boulde...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Reinforced cement concrete M15 grade boundary pillars of

standard design as per IRC:25, fixed in position including

finishing and lettering but excluding painting

Painting two coats after filling the surface with synthetic

enamel paint in all shades on new plastered concrete surfaces

Construction of Three Rows NP4 1000 mm Dia Pipe Culvert Reconst CD At CH 155.11

Dismantling of existing structures like culverts, bridges, retaining

walls and other structure comprising of masonry, cement concrete,

wood work, steel work, including T&P and scaffolding wherever

Removing all type of Hume Pipes and Stacking including Earthwork

and Dismantling of Masonry Works. Above 900 mm

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Back filling behind abutment, wing wall and return wall

complete including compaction as per drawing and Technical

Specification Granular material

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of

building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height. T...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Culverts (Head walls) add 8%

Laying Reinforced cement concrete pipe NP4/prestressed

concrete pipe for culverts on first class bedding of granular

material in single row including fixing collar with cement mortar

1:2 but excluding...

Providing and laying boulders apron on river bed for protection

against scour with stone boulders weighing not less than 40 kg

each complete as per drawing and Technical specification. Boulder Laid Dr...

Providing and laying Pitching on slopes laid over prepared

filter media including boulder apron laid dry in front of toe

of embankment complete as per drawing and Technical

specifications Stone/Boulde...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Reinforced cement concrete M15 grade boundary pillars of

standard design as per IRC:25, fixed in position including

finishing and lettering but excluding painting

Painting two coats after filling the surface with synthetic

enamel paint in all shades on new plastered concrete surfaces

Construction of Four Rows NP4 1000 mm Dia Pipe Culvert Reconst CD At CH 155.83

Dismantling of existing structures like culverts, bridges, retaining

walls and other structure comprising of masonry, cement concrete,

wood work, steel work, including T&P and scaffolding wherever

Removing all type of Hume Pipes and Stacking including Earthwork

and Dismantling of Masonry Works. Above 900 mm dia

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Back filling behind abutment, wing wall and return wall

complete including compaction as per drawing and Technical

Specification Granular material

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of

building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height. T...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Culverts (Head walls) add 8%

Laying Reinforced cement concrete pipe NP4/prestressed

concrete pipe for culverts on first class bedding of granular

material in single row including fixing collar with cement mortar

1:2 but excluding...

Providing and laying boulders apron on river bed for protection

against scour with stone boulders weighing not less than 40 kg

each complete as per drawing and Technical specification. Boulder Laid Dr...

Providing and laying Pitching on slopes laid over prepared

filter media including boulder apron laid dry in front of toe

of embankment complete as per drawing and Technical

specifications Stone/Boulde...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Reinforced cement concrete M15 grade boundary pillars of

standard design as per IRC:25, fixed in position including

finishing and lettering but excluding painting

Painting two coats after filling the surface with synthetic

enamel paint in all shades on new plastered concrete surfaces

Construction of Five Rows NP4 1000 mm Dia Pipe Culvert Reconst CD At CH 154.27, 154.63

Dismantling of existing structures like culverts, bridges, retaining

walls and other structure comprising of masonry, cement concrete,

wood work, steel work, including T&P and scaffolding wherever

Removing all type of Hume Pipes and Stacking including Earthwork

and Dismantling of Masonry Works. Above 900 mm dia

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Back filling behind abutment, wing wall and return wall

complete including compaction as per drawing and Technical

Specification Granular material

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of

building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height. T...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Culverts (Head walls) add 8%

Laying Reinforced cement concrete pipe NP4/prestressed

concrete pipe for culverts on first class bedding of granular

material in single row including fixing collar with cement mortar

1:2 but excluding...

Providing and laying boulders apron on river bed for protection

against scour with stone boulders weighing not less than 40 kg

each complete as per drawing and Technical specification. Boulder Laid Dr...

Providing and laying Pitching on slopes laid over prepared

filter media including boulder apron laid dry in front of toe

of embankment complete as per drawing and Technical

specifications Stone/Boulde...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Reinforced cement concrete M15 grade boundary pillars of

standard design as per IRC:25, fixed in position including

finishing and lettering but excluding painting

Painting two coats after filling the surface with synthetic

enamel paint in all shades on new plastered concrete surfaces

Estimates for Protection Works

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of

building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height. T...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Earth retaining structures add 10%

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing weep holes in Brick masonry/Plain/ Reinforced

concrete abutment, wing wall/ return wall with PVC Pipe

110mm outer dia at 2 kg per m2, extending through the full

width of the structure with s...

Estimates for Field Cds

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of

building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height. T...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Culverts (Head walls) add 8%

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying reinforced cement concrete pipe NP3

for culverts on first class bedding of granular material in

single row including fixing collar with cement mortar 1:2

but excluding excavation,...

Estimate for periodic routine maintenance activities for 5 years for works

Road Maintenance for 3rd year for road with DBM+BC : as wearing coat Maintenance of Road for 3rd year by Clearing and uprooting Vegetation on either sides of the road, Maintenance of Surface drains fo...

Road Maintenance for 4th year for road with DBM+BC : as wearing coat Maintenance of Road for 4th year by Clearing and uprooting Vegetation on either sides of the road, Maintenance of Surface drains fo...

Road Maintenance for 5th year for road with DBM+BC : as wearing coat Maintenance of Road for 5th year by Clearing and uprooting Vegetation on either sides of the road, Maintenance of Surface drains fo...

Shifting of Electrical Poles

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr LongSteel/RCC/PSCC supports as per approved Drawing. Ordinary Soil

RCC Pole - 9 Mtr Long, 145 Kg WL

(Dwg No. For KPTCL & ESCOMs/GM/QS&S/02 Dtd 24.11.2018) as per IS-785

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth

PSCC Pole - 9 Mtr Long, 200 Kg WL

(Dwg No. For KPTCL & ESCOMs /GM/QS&S/50 Dtd 24.11.2018)

as per REC Standards

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth

11 kV, Special 3 Pin Cross Arm - MS

(Dwg No. For KPTCL & ESCOMs/GM/QS&S/03 Dtd 24.11.2018)

11 kV, Cross Arm with HT Top Support

(glass reinforced hot pressed SMC compound)

11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod)

DISC Insulator 45 kN Porcelain

Digging of Pit for GUY SET Ordinary Soil

Releasing of Rabbit Conductor

ACSR Conductor as per IS-398 (Part - 2/1996)Rabbit ACSR(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM

Stringing of Rabbit Conductor (including pin binding, providing

jumps, dead ending, etc.,)

PG Clamp Rabbit to Rabbit

T - Clamp for Rabbit conductor with hot dipped galvanized bolts, nuts and washers

LT 4 Pin Cross Arm - MS (Dwg No. For KPTCL & ESCOMs/ GM/QS&S/32 Dtd 24.11.2018)

LT 2 Pin Cross Arm - MS (Dwg No. For KPTCL & ESCOMs/GM/QS&S/32 Dtd 24.11.2018)

Labour charges fixing of LT 4 Pin Cross Arm with clamps, bolts, nuts & washers with brace - MSa) For RCC Pole

Labour charges Fixing of LT 2 Pin Cross Arm with clamps, bolts, nuts & washers with braces - MSa) For RCC Pole

1.1 kV Ceramic Pin Insulator (Shell only)

No. 8 Strain Insulator

Spiral Earth Electrode

Guarding for Road crossing, Telephone Line Crossing, between HT & LT Line Crossing

a) 200 Amps, Single Break

Labour for 11 kV, GOS

a) 200 Amps, Single Break

A) Base Concreting with CC 1:4: 8 a) Pole base for 11/9.5/9/8 Mtr supports (500x650x150mm)

Pole base for 9 Mtr Square Pole (650x650x150mm)

Pole Concreting with CC 1:2:4 (without coping) 9 Mtr support (650x500x1700mm)

Guy concreting with Boulders, Mud & SandAs per Drawing No. For KPTCL & ESCOMs/GM/CP/7/dt: 24.10.07.(with out cement)

Transporation by Head Load where ever there is no

accessability for transporation by vechicle for Poles 25 to 105 Mtr

For ACSR Conductors 25 to 105 Mtr

Loading and unloading of Pole (loading of Pole to vehicles at stores and unloading at workspot)

NOTE:- Consolidated amount for both loading and unloading. 9 Mtr RCC/PSCC Pole

Fixing of HT/LT Single Top Support

11KV, 5KN Polymeric Pin insulators (24mm Dia FRP Rod) DISC Insulator 45 kN Porcelain

GOS as per IS-9921, IS-1977

174 11 kV, 200 Amps Single Break GOS (Dwg No. For KPTCL & ESCOMs/GM/QS&S/23 Dtd 24.11.2018)

ESCOM DEPOSITE & SUPERVISION CHARGES