Construction of Sports complex and other development works at IICM, Ranchi

Amount

EARTH WORKS : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. : All kinds of soils

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.: All kinds of soil: 0.00 to 1.5m

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : : All kinds of soil.: Pipes, cables, etc. exceeding 80mm dia but not exceeding 300mm dia.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Carriage of earth - 5 km ( by mechanical transport) and its propar disposal/stacking as per direction of EIC

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m: All kinds of soil

Supplying chemical emulsion in sealed containers including delivery as specified : Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Anti termite treatment : Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration complete .. including Five (05) year warranty of the treatment.

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration complete.. including Five (05) year warranty of the treatment.

CONCRETE WORKS - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3.6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns.

REINFORCED CEMENT CONCRETE WORK : Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform.

Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts.

Centering and shuttering including strutting, propping etc. and removal of form for: Stairs, (excluding landings) except spiral-staircases

Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls : Under 20 cm wide

Centering and shuttering including strutting, propping etc. and removal of form for: Weather shade, Chajjas, corbels etc., including edges.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement: All works upto plinth level : Concrete of M25 grade with minimum cement content of 330 kg /cum

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement: All works above plinth level upto floor V level: Concrete of M25 grade with minimum cement content of 330 kg /cum

BRICK WORK : Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with clay flyash F.P.S. (non modular) brick of class designation 7 .5 in superstructure above plinth level up to floor five level in : Cement mortar 1:6 (1 cement : 6 Coarse sand)

Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level: Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

WOOD & PVC WORK : Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made : Frame size 65 x 125 mm (Warranty as provdied by manufacturer)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately): 35 mm thick (Warranty as provdied by manufacturer)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc.

Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 250x10 mm

Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge: 200 mm

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1 .90 mm

Providing and fixing bright finished brass 100 mm mortice latch and lock, lSl marked, with six levers and a pair of anodised (anodic coating not less than grade Ac 10 as per 15 : 1868) aluminium lever handles of approved quality with necessary screws etc. complete

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid separately) (Make Dorma or equivalent) (The work to be Warranted for minimum 02 Year)

Providing and fixing H type handle SSS finish which includes solid handle bar 32 mm outer dia & 1300 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. (Make : Ozone Model no. - OGH - 55, 32mm x 1300mm)(The work to be Warranted for minimum 02 Year)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness and all other firttings & fixtures required. (The work to be Warranted for minimum 02 Year)

Providing and fixing statinless steel (Grade 304) top pivot for connecting 12 mm thick frameless toughened glass door with partition of approved brand and manufacture, all complete as per direction of Engineer-in-charge. (Make: Ozone, Model No.: OPF-1 STD SSS & OPF-2STD SSS or equivalent) (The work to be Warranted for minimum 02 Year)

Providing and fixing statinless steel (Grade 304) top pivot for connecting 12 mm thick frameless toughened glass door with partition of approved brand and manufacture, all complete as per direction of Engineer-in-charge. (Make: Ozone, Model No.: OPF-610 STD SSS or equivalent) (The work to be Warranted for minimum 02 Year)

Providing and fixing statinless steel (Grade 304) bottom patch for connecting 12 mm thick frameless toughened glass door with partition of approved brand and manufacture, all complete as per direction of Engineer-in-charge. (Make: ozone, Model No.: OPF-3 STD SSS or equivalent) (The work to be Warranted for minimum 02 Year)

Providing and fixing statinless steel (Grade 304) corner patch lock for connecting 12 mm thick frameless toughened glass door of approved brand and manufacture, all complete as per direction of Engineer-in-charge. (Make: Ozone, Model No.: OPL-1E STD SSS or equivalent) (The work to be Warranted for minimum 02 Year)

STEEL WORK : Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required: In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

FLOORING WORK : Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints (MINIMUM 10 mm width) with epoxy grout of matching pigments etc . The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, spacers, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size : Size of Tile 800 x 800 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint (MINIMUM 10 mm width) with epoxy grout of matching pigments etc complete: Size of Tile 800x800 mm

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with grouting the joints(MINIMUM 10 mm width) with epoxy grout of matching pigments etc The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, spacers, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily: Glazed Vitrified tiles Matt/Antiskid finish of size : Size of Tile 600 x 600 mm

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge: In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) 11.21.2.1 Acid and alkali resistant tile

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge: Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent

Providing and laying indoor badminton court sports wooden flooring of 1st class Teak wood as per undermentioned specifications : Surface board - 21mm thick1st class teak wood,55 to 85 mm wide and in random length in tongue and groove shape.The edges of the boards will have a finger lock groove and the bottom side with air pass groove and treated with special anti termite and water resistant lacquer. The under frame-Pine wood runners of 70mmx 45mm, treated with anti-termite treatment and fixed over 19mm thick EPDM air cushioned pads,stappled through the two wings at 350mmx 350mm. Installation- IPS subfloor (paid separately) treated with a vapour barrier to be placed on the levelled IPS subfloor before laying under the frame. The runners having air cushion pads to be placed on the vapour barrier in perfect level at 350mm interval in one direction. The surface board to be scerewed to the runner through tongue only and will lock the screwed tongue by the groove of adjoining board. Ends of the board will be locked by inserting the wooden fingers through the edge groove and fixed with suitable adhesive. An expansion of 8 to 10mm to be left open between the wooden flooring and sorrounding tiled area/walls. Finishing- After installation, the floor will be machine sanded in uniform level and finished with FIBA approved ECO primer 2k sports & ECO star 2k sports water based polyurethane lacquer. Game line marking to be carried out in required colors before applying the finishing coat all complete as per instruction of Engineer in charge. (The work to be warranted by the contractor for minimum 05 Years )

Cement concrete flooring 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete: 40 mm thick with 20 mm nominal size stone aggregate

Supply and Installation of 4.5 mm Thickness PVC Vinyl Sports Flooring - Sand Finish Pre- Line Marking BWF Approved Badminton Court Playing Area laid with suitable premium quality adhesive 0.25kg/sqm to 0.35kg/sqm over the elastic base mat and jointed with PVC welding bar of matching colour using hot air gun. (One Roll Size 1.8 MTR X 15 MTR X 13- Roll) (The work to be warranted by the contractor for 03 Years)

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge: Granite work

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels: Area of slab over 0.50 sqm

Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand): Light shade pigment using white cement

Providing and fixing glass strips in joints of terrazo/ cement concrete floors: 40 mm wide and 4 mm thick

Providing and laying of European ITF Certified "Polska Fabryka Sportów - Poland" - 8 Layers Acrylic Synthetic Standards System with thickness up to 2.5mm. 1 layer of Primer. 2 layers of Acrylic Resurfacer. 2 layers of Acrylic Fine cushion. 2 layers of Acrylic Colour with Sand. 2 layer of Acrylic Top coating finish. Line Marking as per International Standards. (The work to be warranted by the contractor for minimum 02 Years)

ROOFING : Providing and laying gola 75x75mm in cement concrete M15 grade including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design in 75x75 mm deep chase.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing on wall face unplasticised Rigid PVC RAIN WATER PIPES conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. : 110 mm diaMeter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: Bend 87.5°: 110 mm bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: Shoe (Plain): 110 mm Shoe

FINISHING WORK: 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

Add or deduct for plaster drip course/ groove in or moulding to R.C.C. projections.plastered surface

6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand)

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/ moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In- Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately.

ALUMINIUM/UPVC WORK: Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.: Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body: Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre).

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete: Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides

WATER PROOFING: Grading roof for water proofing treatment with.Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage : For horizontal surface one coat @1.10 kg per sqm. (Water proofing work to be warranted for 10 years)

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. (Water proofing work to be warranted for 10 years)

Strcutrual Glazing : Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including all specifications as mentioned in NIT. (Please refer specifications in NIT) & also item 25.2 of DSR.

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm: Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/ m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge.

Providing and Laying of Proflex Roof with material of building including all consumables. Imported Color Coated GALVALUME Steel (Complied to ASTM A792 Standards), Base Metal Thickness (BMT) : 1.20 MM, Tolerance : -/+ 0.02 MM, Width of Coil : 912MM, Tolerance : -/+ 2MM, Coating Mass : AZ 150, Yield strength : 350 MPA. Inclusive of Supply of Consumables Anchors, Fasteners, Washers, Epoxy Paint, Lacer, Rubber Paint etc. and Supply of Hangers / Clamps under works contract (For Light hanging purpose) etc. including all costs like transportation, handling, lifting, installation with all necessary fitting, fixures, complete in all respects as per manufacture specificatios & as directed by Engineer-in-charge.

Providing and fixing Toughened glass 12 mm thickness with Wall to Glass Connector (Make - Ozone, Model No. OGC-1+STD SSS or equivalent) with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.(Work to be warranted by contractor for minimum 02 years)

Providing and fixing in position factory made non asbestos fibre reinforced aerated cement sandwich wall/roof/floor light weight solid core panels made of light weight cement concrete core composed of OPC cement, pulverized flyash, quick lime, cotton pulp & Gypsum in mortar state mixed with aeration agent in a preset mould. The outer face on both sides of the panels will be non asbestos fibre cement board confirming to IS :14862:2000. These solid wall panels are installed using Galvanized iron steel tracks/C channel of 1 mm thick of required sizes as recommended by manufacturer’s and fixed to floor and RCC soffit in plumb to each other with steel screw/fasteners. The panel shall be fixed vertically with tongue & groove joint with cement based polymer modified jointing compound. The exposed surface finished with fibre mesh/glass fibre tape with polymer based jointing compound having superior flexibility. Panels should be used as floor & roofing with additional structural support, steel or RCC depending upon the design. All the operation shall be completed in all respect as per drawings, Manufacturers specifications and under the overall direction of Engineer-in-Charge (Cost of all the material is included except “tracks/C channel” which will be paid separately): Non load bearing panels 75 mm thick of required size (minimum 5 mm thick fibre cement board Type A, Category IV as per IS: 14862:2000 on both faces)

Providing, fixing and commissioning AUTOMATIC SLIDING DOOR SYSTEM of 12 mm thick glass door inclusive of auttomatic opening and closing . Manufactured as per ISO 9001 : 2000 standards, CE conformity & compliant with EU Standards EN 16005, EN 60335, EN ISO 13849 1:2008 & German standard DIN 18650, Exquisiteness combined with strength & soft performance, Ability to work with 20% higher or lower than nominal input voltage, Completely protected system input ports which reduces the damage risk due to human error during installation, Self-diagnose and error detection, Ability to automatically adjust speed and slopes according to input voltage change Track/ engine case: 68 x 135 mm (ht x depth), Track length: 4.5 mtr, Door type: automatic, Double leaf door weight: 2 x 120kg, Maximum door opening width: 3000 mm for double panel, Motor: compliant with EU low voltage directives with Maximum power consumption of 250W, Opening speed: adjustable 100-550mm/sec, Closing speed: adjustable 100-500mm/sec (Make: Ozone Model No. OZOM-AD68N or equivalent)

Demolishing: Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Sports Equipment: Providing and installation of International Standards Fixed type Volleyball Post along with tournament Net.

Providing and installation of International Standards Fixed type Basket Ball 1. Technical Specifications :HEAVY DUTY SOCKETED BASKETBALL UNIT SPECIFICATIONS DIMENSIONS: Height: 10ft | 3m, Steel socket depth: 95cm | 37.4in, Extension arm length: 87.5cm | 34.4in, Backboard (practice or match): 48in x 36in or 72in x 42in | 120cm x 90cm or 180cm x 105cm, OD slam dunk dual spring rim diameter: 18in | 45cm, Black powder coated aluminium box section post: 80mm x 3mm | 3.1in x 0.1in, 5mm (0.2in) braided net MATERIALS: Thick marine plywood backboard, Red powder coated solid steel ring, Steel ground sockets MISCELLANEOUS: Basketball rim features enclosed dual spring return mechanism. Basketball rim is suitable for dunking. Basketball pole, backboard & rim is ideal for indoor & outdoor use. Steel sockets feature locking flip top lid. Available with or without in ground sockets (Make - Net World Sportd, Model Name - FORZA ALU80 or equivalent)

Providing and installation/fixing of International Standards Fixed type Tennis Post1. Technical Specifications :This Model confirming to the international Standards with heavyduty structural frames & proper reinforcement. Tennis post made will 4" MS Square Pipe with special internal retched system for tightening the rope/net. Post shall be epoxy Painted and Net to be approved by ITF. (1 set = 2 poles + net, Net with fixing accessories of complete set.)

CHILDREN PLAYING EQUIPMENTS and OPEN GYM: Providing, supplying & Installation/fixing Dumbo Rider Outdoor Playground Material Product Area : 2’10” x 1’11”, Safe Area : 6’10” x 5’11”, Age Group : 3 to 10 Years, Specification : Body of spring rider is made up of LLDPE.Spring assembly is made up of square plates & compression spring. Compression spring is made up of 22 dia. Wire, spring dia. Is 200 mm and height is 300 mm. Dumbo rider handle is made up of 20Nb GI pipe, etc., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - Dumbo Rider, Item Code - FPSR02 or equivalent ) (The work to be warranted for minmum 01 year)

Providing, supplying & Installation/fixing Spring Rider Dolphin Outdoor Playground Material Product Area :3'Ft x 1.7'Ft, Safe Area : 7'Ft x 3.7'Ft, Age Group : 3 to 10 Years, Specification : Spring assembly is made up of square plates & compression spring. Compression spring is made up of 22 dia wire. Spring dia. is 150 mm and height is 300 mm. Stand is made up of 40 NB G.I. pipe. Plate is welded on it to fix plastic Dolphin on it firmly. Character –is made up of LLDPE plastic with rotational moulding process. Length of Dolphin is 895 mm long & it has inbuilt handle and foot rest. etc., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - Spring Rider Dolphin, Item Code - FPDK25 or equivalent ) (The work to be warranted for minmum 01 year)

Providing, supplying & Installation/fixing Mothe rChild Swing Outdoor Playground Material Product Area :6'Ft x 5.3'Ft, Safe Area : 12'Ft x 8.3'Ft, Specification : Top bar is made up of 50 NB G.I pipe having 2 no’s of junction box at the end. The length of top bar is 1.5 m long. Junction box is designed in such a way for fixing 2 no’s of leg pipe which will be made up of 40 NB G.I pipes in an angle to give stability to swing. Special design pipe clamps hold casting assembly of bearings. It gives noiseless and smooth movement to the swing. Round cobalt coated short link chain of 8mm diameter (electric butt welded) as per ISI: 2429, which can carry a weight of 400 kg. The chain is rubberised coated .S.S Shook is used to hang chain in rubber belt. One rubber seat and one toddler seat is made up of rubber with non-skid surface with nylon lining in sandwich pattern. Belt seat should be 13mm thick. S. S. triangular hook is moulded in belt in such a way that it won’t project from the top surface of the belt seats. Toddler seat and belt seat attach with frame made up of 25 NB GI pipe. etc., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - Mother Child swing, Item Code - FPSW11 or equivalent ) (The work to be warranted for minmum 01 year)

Providing, supplying & Installation/fixing FRP Platform Merry Go Round Outdoor Playground Material Product Area :Dia 5'Ft, Safe Area : Dia 10'Ft, Age Group: 3 to 10 Years, Specification : The platform of this merry - go - round consists of non-skid type fiber reinforced plastic (frp). The frp platform is embedded with ms angles of 40x40x5 and 25x25x5 to give it sufficient strength. It is provided with handrails of 20 NB g.i pipes isi mark. All welded joints are properly grounded and coated with an epoxy sealant for rust resistance. All sharp edges and corners are properly ground before painting. Powder coat : done by first coat of primer – jotun brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness.the platform is placed on mgr shaft bearing assembly. The bearing used in this item is of dual heavy duty bearing permanently lubricated with water sealant.the stand of this merry go round is made up of 80 NB g.i pipes isi mark. The foundation frame is fabricated on 40x5 ms angle. etc., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - FRP Platform Merry Go Round, Item Code - FPMR15)

Providing, supplying & Installation/fixing Rainbow See Saw Outdoor Playground Material Product Area : 6'Ft x 1'Ft, Safe Area : 10'Ft x 5'Ft, Age Group : 3 to 8 Years, Specification : Lever is made up of 40 NB GI pipe, Handle & Frame is made up of 20 NB GI B-Class pipe. Stand is made up of 80 NB GI pipe. Two no’s of pedestal bearing are given for smooth and noiseless movement of see saw lever. Bearing is covered with nylon cover. Two no’s of rubber bush stopper are provided for controlled movement of lever and avoiding banging of lever on ground. Seat is made up of LLDPE plastic in rotational moulding processetc., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - Rainbow See Saw, Item Code - FPSPCL217 or equivalent ) (The work to be warranted for minmum 01 year)

Providing, supplying & Installation/fixing Double See Saw Outdoor Playground Material Product Area : 8.5'Ft x 5.2'Ft, Safe Area : 12.5'Ft x 9.2'Ft, Age Group : 3 to 10 Years, Specification : Double see saw lever is made up of 50 NB GI B-Class pipe. See saw stand is made up of 40 NB GI B-Class pipe. Four no of pedestal bearing are given for smooth and noiseless movement of see saw lever. Bearing are covered with nylon cover. Seat is made up of LLDPE plastic in roto moulding process.etc., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - Double See Saw , Item Code - FPSS03 or equivalent ) (The work to be warranted for minmum 01 year)

Providing, supplying & Installation/fixing Cross Fit Outdoor Playground Material Cross Fit vertical support is made up of 80 NB GI B-Class pipe. Horizontal climber side frame is made up of 40 NB GI B-Class pipe. Horizontal climber steps are made up of 25 NB GI B-Class pipe. Inclined climber side frame is made up of 80 NB GI B-Class pipe. Inclined climber steps are made up of 25 NB GI B-Class pipe. Parallel bar is made up of 32 NB GI B-Class pipe. Leg press seat frame is made up of 32 NB GI B-Class pipe. Leg press seat rest & foot rest is made up of LLDPE plastic Abb trainer main frame is made up of 32 NB & 25 NB GI B-Class pipe. Ab trainer top is made up of LLDPE Plastic. Chest press seat frame is made up of 32 NB GI B-Class pipe. Chest press seat rest & foot rest is made up of LLDPE plastic. Chest press handle frame is made up of 32 NB GI B-Class pipe. Pull-up bar is made up of 25 NB GI B-Class pipe. Tai chi Wheel is made up of LLDPE Plastic. Tai Chi Ring is supported on 32 NB GI B- Class Pipe. Shoulder Twirl Ring is made up of 25 NB & 20 NB GI B – Class pipe. specification as per manufacturered etc., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - Cross Fit Station, Item Code - FPSPCL276 or equivalent ) (The work to be warranted for minmum 01 year)

Providing, supplying & Installation/fixing Coral Cascade Outdoor Playground Material Product Area :- 29’8” x 26’1”, Safe Play Area :- 34’8” x 32’1”, Age Group :- 3 yr. To 12 yr. (1) Roto Platform 5ft ht -: Roto deck platform is made up of LLDPE material. The Size of platform is 1160 x 1160 mm. Flange width of platform is 85 mm. 25 mm x 3 mm dimples are embossed on platform for antiskid surface. 25 NB pipe frame is used for support the deck. 100 NB vertical pipe of having length of 3048 mm is used. (2) Roto Platform 7 ft ht -: Roto deck platform is made up of LLDPE material. The Size of platform is 1160 x 1160 mm. Flange width of platform is 85 mm. 25 mm x 3 mm dimples are embossed on platform for antiskid surface. 25 NB pipe frame is used for support the deck. 100 NB vertical pipe of having length of 3657.6 mm is used. (3) Roto Trapezium Platform 5 ft ht -: Trapezium platform is made up of LLDPE material. The Size of platform diagonally is 2230 mm. Flange width of platform is 85 mm. 25 mm x 3 mm dimples are embossed on platform for antiskid surface. 25 NB pipe frame is used for support the deck. 100 NB vertical pipe of having length of 3048 mm is used. (4) Roto Ladder 5ft ht -: Roto ladder is made up of LLDPE. Riser of ladder is 152mm. Width of the ladder is 780mm. Height of the ladder is 5’ft. Ladder railing is made up of 25 Nb. (5) Roto Split level ladder -: The purpose of this ladder is to combine suitable two different size decks. It is made up of LLDPE material in roto moulding process. It has double wall thickness and inbuilt stiffeners. The size is 1015mm X 224mm X 600mm. (6) Roto Straight Open Slide 5 ft ht -: The module is made up of LLDPE material. The inside dimension of the slide will be 420 mm. The length of the slide will be 3155 mm. This is a double wall slide, having 5-6 mm thickness on each wall. Slide modules has internal stiffeners for strength & rigidness. Slide is supported by T-support made up of 40 Nb GI pipe. (7) Roto curve open slide 5 ft ht -: The module is made up of LLDPE material. The inside dimension of the slide is 420 mm. The length of the slide is 2637 mm. This is a double wall slide, having 5-6 mm thickness on each wall......., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - Coral Cascade, Item Code - PLAMPFS08 or equivalent ) (The work to be warranted for minmum 01 year) Please refer specifications in NIT

Providing, supplying & Installation/fixing Chest Press Double open gym equipment Product Area : 6’Ft x 2.8'Ft, Safe Area : 10' Ft x6.8'Ft, Age Group : 13 Years and above, Users at a Time : 2 Nos. Specification : Centre Frame: 100 NB G.I B-Class pipe Jindal make, Leg frame: 32 NB G.I B-Class pipe Jindal make, Main frame: 40 NB G.I B-Class pipe Jindal make, Handle frame & Leg rest: 32NB & 25NB G.I B-Class pipe with two handles, Handle cover: Nylon 66 injection moulded. Seat & Back Rest: LLDP Roto moulded seat with inbuilt bolts 3/8" x 1.5", Stopper: PU Rod. 50 mm dia, Pipe Cap: Galvanised cap. Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar, Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Nut bolts: Galvanised nut bolts. Powder coat: Done by first coat of Primer – Jotun Brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron., etc., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - Chest Press Double, Item Code - FNF001D or equivalent ) (The work to be warranted for minmum 01 year)

Providing, supplying & Installation/fixing Leg Press Double open gym equipment Product Area :6.6'Ft x 1.8'Ft, Safe Area : 10.6'Ft x 5.8'Ft, Age Group : 13 Years and above, Users at aTime : 2 Nos., Specification : Centre pipe: 100 NB G.I B-Class pipe -Jindal make, Seat frame: 32 NB G.I B-Class pipe Jindal make, Seat & Back Rest: LLDP Roto moulded seat with inbuilt bolts 3/8" x 1.5", Foot Rest: LLDP Roto moulded seat with inbuilt bolts 3/8" x 1.5", Pipe Cap: Galvanised caps, Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar Bearings: Reputed make (FAG/SKF), Stopper: PU Rod. 50 mm dia Nut bolts cap: Nylon 66 injection moulded. Nut bolts: Galvanised nut bolts. Powder coat: Done by first coat of Primer – Jotun Brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron. etc., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - Leg Press Double, Item Code - FNF006D or equivalent ) (The work to be warranted for minmum 01 year)

Providing, supplying & Installation/fixing Leg Press Cum Walker Cum Standing Twister open gym equipment Product Area : 10'Ft x 2.5'Ft, Safe Area : 14'Ft x 6.5'Ft, Age Group : 13 Years and above, Users at aTime : 3 Nos. Specification : Main pipe: 100 NB G.I B-Blass pipe -Jindal make, Seat frame: 32 NB G.I B-Class pipe -Jindal make, Seat & Back Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5". Foot Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5". Leg frame: 32 NB G.I B-Class pipe-Jindal make, Handle frame: 25 NB G.I B-Class pipe –Jindal make, Clamps: Nylon 66 injection moulded casing, Twister Disc: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5". Pipe Cap: Nylon 66 injection moulded. Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar, Bearings: Permanent sealed of reputed make (FAG/SKF), Stopper: PU Rod. 50 mm dia Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Nut bolts: Stainless steel M6 x 20, galvanised nut bolts. Powder coat: done by first coat of primer – Jotun Brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. etc., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - Leg Press Cum Walker Cum Standing Twister, Item Code - FNF013 or equivalent ) (The work to be warranted for minmum 01 year)

Providing, supplying & Installation/fixing Tai Chi Double open gym equipment Product Area : 4.2'Ft x 3.3'Ft, Safe Area : 8.2'Ft x 7.3'Ft, Age Group: 13 Years and above, Users at aTime : 2 Nos. Specification : Main frame: 100 NB G.I B-Class pipe Jindal make, Handle frame: 32 NB G.I B-Class pipe Jindal make, Spinning Ring: LLDP Roto moulding wheel. Pipe Cap: Galvanised cap. Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Nut bolts: Galvanised nut bolts Bearings: Permanent sealed of reputed make (FAG/SKF) Nut bolts: Stainless steel M6 x 20, galvanised nut bolts. Powder coat: Done by first coat of Primer – Jotun Brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron. etc., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - Tai Chi Double, Item Code - FNF008D or equivalent ) (The work to be warranted for minmum 01 year)

Providing, supplying & Installation/fixing Pendulum Double open gym equipment Product Area : 4.2'Ft x 3.7'Ft, Safe Area : 8.2'Ft x 7.7'Ft, Age Group : 13 Years and above, Users at a Time : 2 Nos. Specification :Main frame: 100 NB G.I B-Class pipe-Jindal make, Leg frame: 40 NB G.I B-Class pipe Jindal make, Handle frame: 25 NB G.I B-Class pipe Jindal make, Clamps: Nylon 66 injection moulded casing, Foot Rest: LLDP roto moulded seat with inbuilt bolts 3/8" x 1.5", Pipe Cap: Galvanised cap. Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar. Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Bearings: Permanent sealed of reputed make (FAG/SKF) Nut bolts: Galvanised nut bolts. Powder coat: Done by first coat of Primer – Jotun Brand 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron etc., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - Pendulum Double, Item Code - FNF012D or equivalent ) (The work to be warranted for minmum 01 year)

Providing, supplying & Installation/fixing Fun Rower open gym equipment Product Area : 4.7'Ft x 2.5'Ft, Safe Area : 8.7'Ft x 6.5'Ft, Age Group : 13 Years and above, Users at a Time : 1 Nos, Specification : Main frame: 80 NB G.I B-Class pipe Jindal make. Seat frame: 50 NB G.I B-Class pipe -Jindal make, Handle frame: 32 NB G.I B-Class pipe -Jindal make. Seat Rest, Back Rest & Foot Rest: LLDP rotomoulded seat with inbuilt bolts 3/8" x 1.5".Pipe Cap: Galvanised cap. Bearing Cap: Nylon 66 injection moulded. Bearing housing and pin: Seamless pipe & Round bar. Nut bolts: Galvanised nut bolts. Nut bolts cap: Nylon 66 injection moulded with SS M6 fasteners. Bearings: Permanent sealed of reputed make (FAG/SKF) Powder coat: Done by first coat of Primer – Jotun Brand 40-50 micron thickness and totop coat of pure polyester powder with 70- 80 micron thickness. Total thickness is 110-120 micron etc., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - Fun Rower , Item Code - FNF003 or equivalent ) (The work to be warranted for minmum 01 year)

Providing, supplying & Installation/fixing Abb Trainer - Roto open gym equipment Product Area : 4.6'Ft x 1.6'Ft, Safe Area : 8.5'Ft x 5.4'Ft, Age Group : 13 Years and above, Users at a Time : 1 Nos. Specification :Main Frame is made up of 40 NB & 32 NB GI B Class Pipe, Stiffener is made up of 25 NB GI B Class Pipe. Foot Lock is made up 50 NB GI B Class Pipe. Abb Trainer Top is made up of LLDPE Plastic. Size of Top will be 375 mm x 1150 mm x 40 mm thick.etc., complete and as Per Direction of Engineering In-Charge. (Make - Funplay, Model Name - Abb Trainer - Roto , Item Code - FPSPCL187 or equivalent ) (The work to be warranted for minmum 01 year)

Providing, supplying & Installation/fixing Deluxe Swing Outdoor Playground Material Product Area : 9.2'Ft x 6.5'Ft, Safe Area : 13.5'Ft x 10.5'Ft, Specification : Top pipe: 2 mtr long top pipes is made up of 50 NB G.I pipes having specially designed junction box at the end. For securing leg pipe firmly. Leg pipe: 4 no leg pipe is made up of 40 NB G.I pipe. Seat assembly: 1.2mtr long and 0.45 mtr wide seat rest is made up of FRP. 1.2 mtr long and 0.38 mtr wide back rest is made up of FRP. FRP seat rest & back rest are fixed on 20 NB G.I pipe frame. Seat frame is suspended on top bar with 6 mm thick rubberized G.I chain. Specially designed nylon-66 bearing housing clamps are fitted on top pipe for smooth & noiseless movement of the swing etc., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - Deluxe Swing, Item Code - FPGD23 or equivalent ) (The work to be warranted for minmum 01 year)

Providing, supplying & Installation/fixing Eco Bench Product Area : 5'Ft x 2'Ft, Safe Area : 9'Ft x 6'Ft, Specification : Eco bench stand is made up of 50x50x14 SWG M.S square pipe. Bench strip is made up of 14 SWG MS sheet in c shape, Length of bench will be 1500 mm long etc., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - Eco Bench, Item Code - FPGD12 or equivalent ) (The work to be warranted for minmum 01 year)

Providing, supplying & Installation/fixing 8 Station Multi Gym Outdoor Palyground Materials OCTAGONAL STRUCTURE PIPE: 100 NB GI C-CLASS PIPE -JINDAL MAKE FUN WALKER – MAIN FRAME: 100 NB GI C-CLASS PIPE-JINDAL MAKE LEG FRAME: 32 NB GI B-CLASS PIPE-JINDAL MAKE HANDLE FRAME: 25 NB GI B-CLASS PIPE –JINDAL MAKE CLAMPS: NYLON 66 INJECTION MOULDED CASING BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. FOOT REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8" X 1.5". CHEST PRESS - CENTER FRAME : 100 NB GI C-CLASS PIPE-JINDAL MAKE MAIN FRAME : 40 NB & 32 NB GI B-CLASS PIPE -JINDAL MAKE HANDLE FRAME : 32 NB & 25 NB GI B-CLASS PIPE -JINDAL MAKE CONNECTING PIPE : 32 NB & 25 NB & 40 NB GI B-CLASS PIPE -JINDAL MAKE SEAT & BACK REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8" X 1.5". STOPPER: PU ROD. 50MM DIA STANDLING TWISTER - CLAMPS : NYLON 66 INJECTION MOULDED CASING CENTRE PIPE : 100 NB GI C-CLASS PIPE -JINDAL MAKE SEAT FRAME : 32 NB GI B-CLASS PIPE -JINDAL MAKE SEAT & BACK REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8" X 1.5". FOOT REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8" X 1.5". PENDULUMMAIN FRAME : 100 NB GI C-CLASS PIPE- JINDAL MAKE LEG FRAME : 40 NB GI B-CLASS PIPE JINDAL MAKE HANDLE FRAME : 25 NB GI B-CLASS PIPE JINDAL MAKE CLAMPS : NYLON 66 INJECTION MOULDED CASING FOOT REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8" X 1.5"..... detail specification as per manufacturered etc., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - 8 Station Multi Gym, Item Code - FNF039 or equivalent ) (The work to be warranted for minmum 01 year)) Please refer specifications in NIT

Providing, supplying & Installation/fixing Double Swing Outdoor Palyground Materials Top bar is made up of 50 NB G.I B-Class pipe having 2 sets of bearing assembly & profile plate at end. The length of top bar is 2.8m long. Junction box is designed in such a way for fixing 2 no’s of leg pipe made up of 40 NB G.I pipes, in an angle to give stability to swing. The length of leg pipe is 2900 mm long. Special design nylon pipe clamps hold assembly of bearings. It gives noiseless and smooth movement to the swing. SS 304 grade chain is used for connecting rubber belt seat with bearing assembly. Seat is made up of rubber with non-skid surface with nylon lining in sandwich pattern.Belt seat should be 13 mm thick. S.S. Triangular hook is moulded in belt in such a way that it won’t project from the top surface of the belt seats. Detail specification as per manufacturer etc., complete and as Per Direction Of Engineering In-Charge. (Make - Funplay, Model Name - Double Swing or equivalent ) (The work to be warranted for minmum 01 year)

PLUMBING : Sanitary Installations & Internal Water Supply : Supply, insatallation, testing and commissioning of white vitreous china single trap syphonic pattern having back inlet, supporting chair, wall hung water closet with Concealed Cistern and CP brass flush bend (European type) water closet with seat and lid, with C.P. brass hinges and rubber buffers, adapter, rubber joints fixed to W.C., C.P. brass screwed washers including cutting and making good the walls and floors wherever required and HDPE wc pan connector including jointing with white cement coomplete in all respects. (EWC -Jaquar wall hung WC Cat No. SLS-WHM-6953BIUFSM with close seat & cover , Concealed Cistern (Make - Jaquar - JCS-WHT-2400WP and plate - JCP-CHR-352415 or equivalent ) W.C. pan with ISI marked white solid plastic seat and lid. (The work to be warranted by contractor for 07 years)

Supply, installation, testing and commissioning Toilet Roll Holder including cutting and making good the walls.[Make:Jaquar,Model: ACN-CHR-1153S or equivalent ].(The work to be warranted by contractor for 07 years)

Supply, installation, testing and commissioning Hand shower (Health Faucet) with 8 mm Dia, 1.2 m Long C. P. flexible Tube & Wall hook etc. complete. (Make: Jaquar : Model - ALD-573 or equivalent )(The work to be warranted by contractor for 07 years)

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge..(sink & urinal)(Make: Jaquar : Model - ALD-CHR-769L300X190 or equivalent) (The work to be warranted by contractor for 07 years)

Providing and fixing C.P. brass Two way Bib Cock with wall flange of approved quality confirming to IS:8931 (Make: Jaquar : Model - OPP-15041PM or equivalent )(The work to be warranted by contractor for 07 years) 15mm nominal bore

Supply, installation, testing & commissioning wash basin with CP waste coupling of standard pattern, & union, 32 mm dia C.P. pipe to wall and C.P. wall flange, complete including cutting and making good the walls where required. Rectangular Under counter starwhite colour vitrous china wash basin (Make: Jaquar : Model - JDS-WHT-25907N , Waste Coupling ALD-CHR-705L130 AND Concealed body Basin diverter - ALD-CHR-233N or equivalent)(The work to be warranted by contractor for 07 years)

Supply, installation, testing and commissioning liquid soap dispenser with glass bottle and stainles steel lid fitted with C.P. brass screws. (Make: Jaquar : Model - ACN-1135N or equivalent ) (The work to be warranted by contractor for 07 years)

Providing & fixing white vitreous china vitrous urinal of size 635 x 325 x 385 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. (Make: Jaquar : Model - URN-WHT-13255 or equivalent )(The work to be warranted by contractor for 07 years)

Providing & fixing wall hung rectangular shape urinal partition with frost glass of size 900 x 450 x 8mm with C P braket complete. (Make: Jaquar : Model - JSE-CHR-810US450X or equivalent) (The work to be warranted by contractor for 07 years)

Providing and fixing mirror of 6mm thick superior glass (of approved quality) rectangular frameless shape, bevelled each side of size (18' x 24') fitted with with heavy duty hook of approved make and the directions of engineer-in-charge.

Providing and fixing exposed part kit of single lever basin mixer wall mounted consisting of operating lever, cartidge sleeve, wall flange, nipple & spout (Compatible with ALD-233N or ALD-235N). (Make: Jaquar : Model - OPP - 15233NKPM or equivalent) (The work to be warranted by contractor for 07 years)

Providing and fixing Sensor Flushing Valve for Urinal with Complete Kit (Battery Operated) (Suitable For Urinal URS-WHT-13255). (Make: Jaquar : Model - SNR-51097 or equivalent ) (The work to be warranted by contractor for 07 years)

Providing and fixing grating of 125 mm outer dia with Cockroach Trap (304 Grade) with sheet thickness of 0.8 mm and matt finishing in floor. Floor drain consist grating, inner filter, outer filter and frame complete as per direction of Engineer in Charge.

Soil, Waste, Vent & Rain Water Pipes : Providing and fixing Floor trap of size 4" x 2 1/2" complete as per direction of Engineer in Charge. Single side outlet

Providing and fixing multi level Floor trap of size 4" x 3"x 2" complete as per direction of Engineer in Charge.

Providing and fixing unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type B (4kg/sqm) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes: 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised R igid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler : 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised R igid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.: Single tee with door: 110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised R igid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.: Single tee without door: 110x110x110 mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by screwed with M.S. screws of required length etc. complete as direction of Engineeer-in-charge.

Providing and fixing vent cowl : 110 mm dia

Providing and fixing unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type B (4kg/sqm) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes : 75 mm diameter

Providing and fixing unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type B (4kg/sqm) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes: 150 mm diameter

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :150 mm diameter S.W. pipe

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1:3:6 ( 1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level: 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centring and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Providing, hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centring, shuttering, finishing smooth sills and the like including the cost of required centring, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfaces complete but excluding cost of reinforcement with 1:1.5:3(1 cement: 1.5coarse sand: 3 graded stone aggregate 20mm nominal size).

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge: Internal Work - Exposed on Wall - 40 mm nominal outer dia .Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge: Internal Work - Exposed on Wall- 50 mm nominal outer dia .Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge: Concealed work including cutting chases and making good the walls etc. 20 mm nominal outer dia .Pipes.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Providing and fixing PVC gate valve with handle of approved quality (screwed end): 50 mm nominal bore

Providing and fixing PVC union of approved quality (screwed end): 50 mm nominal bore

WIRING: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required: Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.: 2 X 6 sq. mm + 1 X 6 sq. mm earth wire (For submain wiring)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.: 4 X 6 sq. mm + 2 X 6 sq. mm earth wire (For submain wiring)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as reqired: 3 X 1.5 sq. mm (For circuit wiring)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as reqired: 3 X 2.5 sq. mm (For circuit wiring)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as reqired: 3 X 4.0 sq. mm (For power point wiring)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required: 25 mm

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supply and fixing extra down rod for ceiling fan of 1 metre length G.I. pipe, 15 mm dia, heavy guage including painting etc. as required.

LIGHT FITTINGS AND FANS: Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC , earthing etc. complete as required

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required: Upto 450 mm sweep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes

Providing and erecting air circulator 600 mm. sweep oscillating type, wall mounting 1440 RPM without speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 volts single phase, 50cycles A.C. supply, core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation

Supply of 15W LED Bulb, 6500K with & integrated electronic driver. Of havells ref. cat. NU BULB PLUS 15 W 865 B22 3 STAR or apporoved equivalent.

Supply of 18W LED, Recessed mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver with higher design life class, complete with all fixing accessories as required of Cate. Ref. HAVELLS : INTEGRAPLUSDLSQ18WLED865 or apporoved equivalent.

Supply of 10W LED Recessed mounted Downlight with Elegantly designed sleek recessed mounted pressure die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver,complete with all fixing accessories as required of Cate. Ref. HAVELLS : EDGEPRONEORDDLR10WLED865S or apporoved equivalent.

Supply of 22W LED, Basic all purpose surface and wall mounted LED batten with aluminum housing & integrated electronic driver. Of havells ref. cat. LUMILINE+BS22WLED865SPCSS or apporoved equivalent.

Supply of 15W LED, Elegantly designed sleek surface mounted pressure die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver.,complete with all fixing accessories as required of Cate. Ref. HAVELLS : EDGESURFACERDDLR15WLED865S 15 W 6500K or apporoved equivalent.

Supply of Surface mounted 36 watt LED Panel light (4' x 1') provides soft light and glare free symmetrical illumination complete with integrated electronic driver & LED directly on ceiling.complete with all fixing accessories as required of Cate. Ref. HAVELLS : PLANOSUR4X1PLS36WLED857S0720

Supply of 100W LED FLOOD LIGHT, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting., complete with all fixing accessories as required of Cate. Ref. JETAALBAFLOODLIGHT100W or apporoved equivalent.

Supply of Indoor recess mounting PLANO 2X2 36 watt LED flat panel luminaire suitable for armstrong / grid ceiling and complete with electronic driver etc. directly on false ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required. .havells ref. cat. PLANO2X2PLR36WLED865S or apporoved equivalent.

Supplying and fixing of 100 Watt LED HIGHBAY Next generation, energy saving, environment friendly & robust highbay LED with PDC housing suitable for ceiling (Surface/Suspended) mounting with system efficacy upto 150 lm/W..complete with all fixing accessories as required of Cate. Ref. HAVELLS : SAUCERGENXPROHBP100WLED757P90DBOLTG or apporoved equivalent.

Supply of sizes 300 mm, 230 v A.C. heavay duity exhaust fan complete with motor,blades,frame, bracket, lover/shutter etc. as required of Greatwhite or apporoved equivalent.

MCB ,DB'S: Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator): 6 way (4 + 18), Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) : 16 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required: Single pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required : 40A

Supplying and fixing following rating, double pole, 230 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required: 63A

Supplying and fixing following rating,four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.: 40A

Supplying and fixing following rating,double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required: 63A

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required: For 6 way, Double door TPN MCBDB

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc.as required: For 14 way, Double door SPN MCBDB

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required

EARTHING : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm

UPS : Supply and fixing of 5 KVA UPS unit with SMF batteries 240V AC input voltage ,30 minutes back up time, output voltage on battery 240V AC±5V, frequency 50Hz±1Hz with transfer time mode<10ms with provisions for soft start and overload , short circuit, battery deep discharge, Battery over charge, mains low and high, thermal protections.Supply, installation ,testing and commissioning of racks for smf batteries along with interconnecting links and Dc cables upto 6 meters to be included

LT CABLE, LAYING & TERMINATIONS : LAYING : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ metal pipe as required: Upto 35 sq. mm

LT CABLE, LAYING & TERMINATIONS : LAYING : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ metal pipe as required: Above 35 sq. mm and upto 95 sq. mm

CABLE TERMINATION : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required: 3½ X 95 sq. mm (45mm)

CABLE TERMINATION : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required: 3½ X 35 sq. mm (32mm)

CABLE TERMINATION : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required: 4 X 10 sq. mm (25mm)

SUPPLY OF CABLE: Supply of XLPE insulated and PVC sheathed power cable of 1.1 kV grade, 1.1 kV, multi core, aluminum,armored , underground, Conforming to IS 7098-2: 3.5c x 95 sqmm

SUPPLY OF CABLE: Supply of XLPE insulated and PVC sheathed power cable of 1.1 kV grade, 1.1 kV, multi core, aluminum,armored , underground, Conforming to IS 7098-2: 3.5c x 35 sqmm

SUPPLY OF CABLE: Supply of XLPE insulated and PVC sheathed power cable of 1.1 kV grade, 1.1 kV, multi core, aluminum,armored , underground, Conforming to IS 7098-2: 4c x 10 sqmm

SUPPLY OF CABLE: Supply of XLPE insulated and PVC sheathed power cable of 1.1 kV grade, 1.1 kV, multi core, aluminum,armored , underground, Conforming to IS 7098-2: 4c x 6 sqmm

RACEWAY : Supplying and installation of following sizes 2.0 mm thick GI Raceways in recess/ on surface including chasing the wall/floor complete as required: 150 mm x40 mmx2.0mm /2 comportment

Supplying and installation of following sizes Junction box on surface including chasing the floor complete as required: 150 mm x40 mmx2.0mm /2 comportment

Supplying and installation of following sizes Vertical Bend in recess/ on surface including chasing the wall/floor complete as required: 150 mm x40 mmx2.0mm /2 comportment

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required

Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required

ELV SYSTEM : TELEPHONE & DATA : Supplying, installing, testing & commissioning digital (hybrid) type EPABX of 6 x 32 universal extensions suitable upto 96 extensions compliant to IEC 61000, EN 60950, CISPR 22, IS:9000 part 2/section 4 having LAN/WAN port, USB port, RS232 port as per specification complete

Supply, Installation, Testing and Commissioning of Analog phone with caller id , speaker and display

Supplying, erecting & commissioning 20 pairs FR junction box with moulded plastic enclosure as per specification

Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable

Supplying, erecting & terminating 20 pair, 0.5mm dia, jelly filled unarmoured telephone copper cable with poly-al laminate moisture barrier, laid in provided PVC casing-n-capping/conduit

Supply, installation, testing and commissioning of Face Plate 1 Port - White with I/o complete as per the requirement & complete in all respect and as directed to the satisfaction of engineer

Supplying, installing & testing UTP connector (RJ-45)

Supply, Installation, Testing & Commissioning of 24 Port Layer 2 Managed Access Non POE switch with 24x1G Base-T Ports and 4x1G Base-T Ports.Should support switching fabric of 240 Gbps or more. Operating Temp: 0° C to +50° C Make: Cisco/ Juniper/ Allied Telesys/ D Link

Supply , Installation, Testing and Commissioing of 24 port Patch Panel, Make Legrand/Dlink/Molex

Supply , Installation, Testing and Commissioing of UTP Patch cord-1 Mtr

Supply , Installation, Testing and Comissioning of Wall mounted Communication rack with glass doors, handles ,lock , Top and Bottom Cable entries, Supports for mounting rack on wall , Cable managers, one Fan, Equipment mounting hardware, power supply box for supplying power to switches, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable: 6U wall mount rack (Dimension-DxWxH – 500x550x347 mm)

Supplying and Drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as Required: 1 run of cable

Supplying and Drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as Required: 2 run of cable

Supplying and Drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as Required: 3 run of cable

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required : Telephone socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required: 1 or 2 Module (75mmX75mm)

CCTV: Supply , Installation, Testing and Commissioing of 4MP IR Indoor Dome Camera -1/3" Progressive Scan CMOS, 2688 × 1520 at 25fps, 2.8mm Fixed lens, 0.01 Lux at F1.2, ICR, ONVIF (PROFILE S, PROFILE G), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 128 GB (SD card not included), IP67, IK10, Alarm & Audio: 1 input & 1 output, Edge Anlalytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Audio exception detection, video tampering, UL, CE, FCC certified.. 3 Years Standard Warranty. Preferred Make: Bosch/Hikvision/Pelco

Supply , Installation, Testing and Commissioing of 4MP IR Bullet Fixed Camera -1/2.8"Progressive Scan CMOS, 2688 × 1520 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR, ICR, ONVIF (PROFILE S, PROFILE G), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 128 GB (SD card not included), IP67, Edge Anlalytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Video tampering, UL, CE, FCC certified. Preferred Make: Bosch/Hikvision/Pelco

Supply of 55" LED Panel, 4K LED Screen for live view and replay of recorded View with mounting stand & HDMI cable. Make: Samsung/LG/Sony

Supply , Installation, Testing and Commissioing of 8 TB of Storage Harddisk inside Servers ( H.265/ 60 days / 2 MP/ 15 fps) for cameras Make: Seagate/ Western Digital

Supply, installation, testing & commissioning of 24 Port Layer 2 Managed Access POE switch with 20x1G Base-T PoE+ and 4x1G Base-T Ports.Should support switching fabric of 240 Gbps or more. Should support PoE+ with PoE budget of 300 W. Operating Temp: 0° C to +50° C Make: Cisco/ Juniper/ Allied Telesys/ D Link

Supply, Installation, Testing and Commisioning of 6U wall mount rack (Dimension-DxWxH – 500x550x347 mm)

Supply, Installation, Testing and Commisioning of RJ45 Connectors

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete: 6 Zone

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.

Providing and fixing MV. danger notice plate of 200 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required: 200 mm dia (OD-200 mm & ID-175 mm nominal)

HVAC : OUT DOOR UNITS: Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 : 20.0 HP HEAT PUMP

VRV/VRF INDOOR UNITS: Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower ,multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drainpan, other necessary supports etc., suitable for operation on single phase AC supply 230V±10%,50 Hz complete as required. The unit shall have automatic force shut down provision in case of fire on receiveing signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature: 8.0 TR Ductable unit

Y-JOINTS: Supply Installation, testing, commissioning of supply & return Y-joints sets of required size for refrigerant piping as per manufacturer standards: Y- Joints set

REFRIGERANT PIPING: Supply Installation, testing, commissioning and Interconnecting refrigerant copper pipe work (between indoor & outdoor units as per specifications) with (19mm/13mm thick) closed cell elastomeric nitrile rubber tubular insulation. All piping inside the room shall be properly supported with MS slotted angle, including cutting chases, holes in walls/slabs and making them good. All external piping shall run in covered cable tray (item for cable tray shall be quote seperately): Dia 9.5 mm OD 13mm thick insulation

REFRIGERANT PIPING: Supply Installation, testing, commissioning and Interconnecting refrigerant copper pipe work (between indoor & outdoor units as per specifications) with (19mm/13mm thick) closed cell elastomeric nitrile rubber tubular insulation. All piping inside the room shall be properly supported with MS slotted angle, including cutting chases, holes in walls/slabs and making them good. All external piping shall run in covered cable tray (item for cable tray shall be quote seperately): Dia 15.9 mm OD 13mm thick insulation

REFRIGERANT PIPING: Supply Installation, testing, commissioning and Interconnecting refrigerant copper pipe work (between indoor & outdoor units as per specifications) with (19mm/13mm thick) closed cell elastomeric nitrile rubber tubular insulation. All piping inside the room shall be properly supported with MS slotted angle, including cutting chases, holes in walls/slabs and making them good. All external piping shall run in covered cable tray (item for cable tray shall be quote seperately): Dia 22.2 mm OD 19mm thick insulation

REFRIGERANT PIPING: Supply Installation, testing, commissioning and Interconnecting refrigerant copper pipe work (between indoor & outdoor units as per specifications) with (19mm/13mm thick) closed cell elastomeric nitrile rubber tubular insulation. All piping inside the room shall be properly supported with MS slotted angle, including cutting chases, holes in walls/slabs and making them good. All external piping shall run in covered cable tray (item for cable tray shall be quote seperately): Dia 28.6 mm OD 19mm thick insulation

DRAIN PIPING : Providing and fixing of PVC drain pipe of 6 Kg /cm2 pressure rating complete with 6mm thick closed cell nitrile rubber insulation, fittings, supports, valves as per specifications & drawings: 32 mm dia

Sheet Metal Duct: Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required : Thickness 0.63 mm sheet (24 G)

Sheet Metal Duct: Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required: Thickness 1.0 mm sheet (20 G)

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required: Thickness 0.63 mm sheet (24 G)

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required: Thickness 1.0 mm sheet (20 G)

Supply and fixing of acoustic lining of supply air duct and plenum with 13 mm thick with Engineered Nitrile Rubber open cell foam with Density 140 - 180 Kg/m3 and Class 1 Fire Performance and with antimicrobial protection and should pass Fungi Resistance as per ASTM G 21 and Bacterial Resistance as per ASTM E 21 complete with manufacturer's recommended Rubber based Adhesive in a blend of solvents etc complete as required.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class "O") insulation on existing duct after applying two coats of cold setting adhesive (CPR X compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required: 19 mm

Supplying, fixing. testing commissioningof GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, in accordance with approved shop drawings and specifications complete as required.

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills without volume control dampers complete as required.

Supply, installation and balancing of extruded aluminium powder coated air louvers complete with damper, aluminium wire mesh bird screen as per specifications.

Supply, fabrication, installation and testing the non-porous 200mm wide flexible connections constructed of fire resistance flexible, double canvas connection with resistoflex material as per the approved shop drawings.

ELECTRICAL WORKS : Supplying and fixing of following ways surface/ recessmounting, vertical type, 415 V, TPN MCB distribution board ofsheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) as required : 4 way (4 + 12), Double door

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DBcomplete with connections, testing and commissioning etc. as required: 63A ODU

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required: Triple pole and neutral

Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed Copper conductor armoured cables including , clamped includes anchor fastners wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning etc as per specification complete as required: 4C x 10 Sq.mm.

Supply and erection of hot dip G.I. cable tray perforation not more than 17.5% for specific dimensions along with tees, bends. The cable tray shall be hang from ceiling/ fixed to wall with necessary angle/flat iron / hanging rod, for ceiling suspensions, clamps, anchor fastner, nuts, bolts, washers, not mor than 1.5 mtr. apart complete as per specification to complete the job. The tray shall be as follows : 100 x 50 mm x 1.6mm thick

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required: 25 mm dia. ISI marked, steel conduit

WIRING IN EXISTING CONDUIT / PVC CASING CAPPING WITH COPPER CONDUCTOR : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required: 2x 1.5Sq mm

WIRING IN EXISTING CONDUIT / PVC CASING CAPPING WITH COPPER CONDUCTOR : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required: 4x 2.5sq.mm

EARTHING SYSTEM: Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Comprehensive Maintenance of HVAC : Comprehensive annual maintenance contract for 1st year after successful completion of two years of warranty period

Comprehensive annual maintenance contract for 2nd year after successful completion of two year of warranty period

Comprehensive annual maintenance contract for 3rd year after successful completion of two year of warranty period

Comprehensive annual maintenance contract for 4th year after successful completion of two year of warranty period

Comprehensive annual maintenance contract for 5th year after successful completion of two year of warranty period

Comprehensive annual maintenance contract for 6th year after successful completion of two year of warranty period

Comprehensive annual maintenance contract for 7th year after successful completion of two year of warranty period

Comprehensive annual maintenance contract for 8th year after successful completion of two year of warranty period

Total impact of GST for the purpose of CTC